Mixed DPPC-cholesterol Langmuir monolayers in presence of hydrophilic silica nanoparticles

Membrane-Nanoparticle Interactions: The Impact of Membrane Lipids

The growing field of nanotechnology presents opportunity for applications across many sectors. Nanostructures, such as nanoparticles, hold distinct properties based on their size, shape, and chemical modifications that allow them to be utilized in both highly specific as well as broad capacities. As the classification of nanoparticles becomes more well-defined and the list of applications grows, it is imperative that their toxicity be investigated. One such cellular system that is of importance are cellular membranes (biomembranes). Membranes present one of the first points of contact for nanoparticles at the cellular level. This review will address current studies aimed at defining the biomolecular interactions of nanoparticles at the level of the cell membrane, with a specific focus of the interactions of nanoparticles with prominent lipid systems.

Endosomal escape: A bottleneck for LNP-mediated therapeutics

Lipid nanoparticles (LNPs) have recently emerged as a powerful and versatile clinically approved platform for nucleic acid delivery, specifically for mRNA vaccines. A major bottleneck in the field is the release of mRNA-LNPs from the endosomal pathways into the cytosol of cells where they can execute their encoded functions. The data regarding the mechanism of these endosomal escape processes are limited and contradicting. Despite extensive research, there is no consensus regarding the compartment of escape, the cause of the inefficient escape and are currently lacking a robust method to detect the escape. Here, we review the currently known mechanisms of endosomal escape and the available methods to study this process. We critically discuss the limitations and challenges of these methods and the possibilities to overcome these challenges. We propose that the development of currently lacking robust, quantitative high-throughput techniques to study endosomal escape is timely and essential. A better understanding of this process will enable better RNA-LNP designs with improved efficiency to unlock new therapeutic modalities.

Effect of cationic dendrimer on membrane mimetic systems in the form of monolayer and bilayer

Interactions between a zwitterionic phospholipid, 1, 2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and four anionic phospholipids dihexadecyl phosphate (DHP), 1, 2-dimyristoyl-sn-glycero-3-phosphoglycerol (DMPG), 1, 2-dipalmitoyl-sn-glycero-3-phosphate (DPP) and 1, 2-dipalmitoyl-sn-glycero-3-phospho ethanol (DPPEth) in combination with an additional amount of 30 mol% cholesterol were separately investigated at air-buffer interface through surface pressure (π) - area (A) measurements. π-A isotherm derived parameters revealed maximum negative deviation from ideality for the mixtures comprising 30 mol% anionic lipids. Besides the film functionality, structural changes of the monomolecular films at different surface pressures in the absence and presence of polyamidoamine (PAMAM, generation 4), a cationic dendrimer, were visualised through Brewster angle microscopy and fluorescence microscopic studies. Fluidity/rigidity of monolayers were assessed by surface dilatational rheology studies. Effect of PAMAM on the formation of adsorbed monolayer, due to bilayer disintegration of liposomes (DPPC:anionic lipids= 7:3 M/M, and 30 mol% cholesterol) were monitored by surface pressure (π) - time (t) isotherms. Bilayer disintegration kinetics were dependent on lipid head group and chain length, besides dendrimer concentration. Such studies are considered to be an in vitro cell membrane model where the alteration of molecular orientation play important roles in understanding the nature of interaction between the dendrimer and cell membrane. Liposome-dendrimer aggregates were nontoxic to breast cancer cell line as well as in doxorubicin treated MDA-MB-468 cell line suggesting their potential as drug delivery systems.

Investigation on the relationship between lipid composition and structure in model membranes composed of extracted natural phospholipids

HYPOTHESIS

Unravelling the structural diversity of cellular membranes is a paramount challenge in life sciences. In particular, lipid composition affects the membrane collective behaviour, and its interactions with other biological molecules.

EXPERIMENTS

Here, the relationship between membrane composition and resultant structural features was investigated by surface pressure-area isotherms, Brewster angle microscopy and neutron reflectometry on in vitro membrane models of the mammalian plasma and endoplasmic-reticulum-Golgi intermediate compartment membranes in the form of Langmuir monolayers. Natural extracted yeast lipids were used because, unlike synthetic lipids, the acyl chain saturation pattern of yeast and mammalian lipids are similar.

FINDINGS

The structure of the model membranes, orthogonal to the plane of the membrane, as well as their lateral packing, were found to depend strongly on their specific composition, with cholesterol having a major influence on the in-plane morphology, yielding a coexistence of liquid-order and liquid-disorder phases.

Regulation of calcium ions on the interaction between amphotericin B and cholesterol-rich phospholipid monolayer in LE phase and LC phase

Amphotericin B, as a "gold standard", is used to treat invasive fungal infections. The AmB molecule can bind easily to cholesterol and damage cell membranes, so it produces the toxicity on cell membrane, which limits its clinical dose. However, the interaction between AmB and cholesterol-rich membrane is unclear now. The phase state of the membrane and the metal cation outside cell membrane may affect the interaction between AmB and the membrane. In this work, the effects of amphotericin B on the mean molecular area, elastic modulus and stability of mammalian cell membrane rich in cholesterol in the presence of Ca²⁺ ions were studied using DPPC/Chol mixed Langmuir monolayer as a model. The Langmuir-Blodgett method and AFM test were used to study the effects of this drug on the morphology and height of cholesterol-rich phospholipid membrane in the presence of Ca²⁺ ions. The influence of calcium ions on the mean molecular area and the limiting molecular area was similar in LE phase and in LC phase. The calcium ions made the monolayer more condensed. However, calcium ions can weaken the shortening effect of AmB on the relaxation time of the DPPC/Chol mixed monolayer in LE phase but enhance it in LC phase. Interestingly, calcium ions caused a LE-LC coexistence phase to occur in the DPPC/Chol/AmB mixed monolayers at 35mN/m, which was confirmed by atomic force microscopy. The results can help to understand the interaction between amphotericin B and cell membrane rich in cholesterol in the calcium ions environment.

Effect of Fluoxetine on the Surface Behavior of the Lipid Monolayers at Different Surface Pressures

Fluoxetine (FLX), used in the clinic to treat depression, is a well-known cationic amphiphilic antidepressant. However, there is a lack of research on the effect of FLX on the surface behavior of lipid monolayers under different surface pressures. In this study, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/CHOL (DPPC/POPC/CHOL) monolayers were prepared via the Langmuir method, and FLX was added to these monolayers under various surface pressures. The effect of FLX on the surface behavior of DPPC/POPC/CHOL monolayers under various surface pressures was studied using a combination of surface pressure-area isotherms, compressibility modulus-surface pressure curves, and atomic force microscope (AFM). The results showed that the effect of FLX on the lipid monolayers was different under different surface pressures. The interaction between FLX and lipid molecules was weak under low surface pressures, and FLX could easily intercalate between the lipid molecules to inhibit monolayer phase transition. The interaction between FLX and lipid molecules was enhanced and FLX tended to self-aggregate to reduce the monolayer stability when the surface pressure was high. This study lays the foundation for further studies on the interaction between FLX and lipid monolayers.

Effect of Silica Microparticles on Interactions in Mono- and Multicomponent Membranes

Advancing our understanding of the mechanism of the interaction between inhaled pollutant microparticles and cell membrane components is useful to study the impact of fine particulate matter on human health. In this paper, we focus on the effect of cholesterol (Chol) molecules on the surface properties of a model membrane in the presence of silica microparticles (MPs). Mixed monolayers containing phospholipid-dipalmitoylphosphatidylcholine (DPPC), Chol and silica particle dispersions (MPs; 0.033% w/w, 0.33% w/w and 0.83% w/w) were formed and studied using the Langmuir monolayer technique complemented by Brewster Angle Microscopy (BAM) images. It was shown that Chol caused a condensation of the DPPC monolayer, which influenced the penetration of MPs and their interactions with the model membrane. The relaxation experiments of the lipid–MP monolayer proved that the presence of Chol molecules in the monolayer led to the formation of lipid and MP complexes. Strong interactions between Chol and MPs contributed to the formation of more stable monolayers. The presented results can be useful to better comprehend the interaction between particulate materials and the lipid components of biomembranes.

Interaction of negatively and positively capped gold nanoparticle with different lipid model membranes

The use of functionalised gold nanoparticles in biomedical applications is expanding. Here we explore the interaction of gold nanoparticles with lipid membranes using readily available equipment and basic techniques to explore how the charge on the nanoparticles, and the nature of the lipid, influences the interaction. Gold nanoparticles were synthesised with two different surface functionalisations, negatively charged citrate groups and positively charged cetyltrimethylammonium groups from CTAB, to determine how surface charge affects the interaction of the nanoparticles with the Zwitterionic lipid POPC and the anionic lipid POPG. It was observed that the surface pressure/area isotherms of POPG monolayers on exposure to citrate capped nanoparticles were not shifted to higher molecular areas as much as those of POPC, suggesting that the anionic headgroups of the POPG lipid repel the anionic surface charge of the citrate capped nanoparticles to some extent limiting inclusion. In contrast, the surface pressure/area isotherms of the POPG monolayers exposed to CTAB capped nanoparticles are shifted to higher molecular areas more than for the POPC monolayers. The interaction of anionic nanoparticles with lipid bilayers was measured by the mass change of the bilayer deposited on the surface of a quartz crystal microbalance (QCM) exposed to nanoparticles in an aqueous phase flow. The QCM frequency changes show that bilayers of unsaturated phosophocholine lipids readily took up particles, whereas for the saturated lipid DPPC significant uptake was only observed when the bilayer was warmed to above its gel-to-fluid transition temperature, T_m. This is possibly due to an increase in the molecular mobility and bilayer bending modulus, κ, of the bilayer.

Interactions between O2 Nanobubbles and the Pulmonary Surfactant in the Presence of Inhalation Medicines

A dispersion of oxygen nanobubbles (O₂-NBs) is an extraordinary gas-liquid colloidal system where spherical gas elements can be considered oxygen transport agents. Its conversion into inhalation aerosol by atomization with the use of nebulizers, while maintaining the properties of the dispersion, gives new opportunities for its applications and may be attractive as a new concept in treating lung diseases. The screening of O₂-NBs interactions with lung fluids is particularly needed in view of an O₂-NBs application as a promising aerosol drug carrier with the additional function of oxygen supplementation. The aim of the presented studies was to investigate the influence of O₂-NBs dispersion combined with the selected inhalation drugs on the surface properties of two types of pulmonary surfactant models (lipid and lipid-protein model). The characteristics of the air-liquid interface were carried out under breathing-like conditions using two selected tensiometer systems: Langmuir-Wilhelmy trough and the oscillating droplet tensiometer. The results indicate that the presence of NBs has a minor effect on the dynamic characteristics of the air-liquid interface, which is the desired effect in the context of a potential use in inhalation therapies.

Effect of silica nanoparticles on cell membrane fluidity: The role of temperature and membrane composition

The increasing production and application of silica nanoparticles (SiO₂ NPs) raise public concern regarding their environmental and health risks. The fluidity of the cell membrane is essential for supporting membrane proteins and regulating membrane transport. Changes in membrane fluidity inevitably influence the physiological activities of cells and even cause biological effects. In this study, the effect of SiO₂ NPs on membrane fluidity was studied at 25 °C and 37 °C, and the role of membrane components in SiO₂ NP-membrane interactions was investigated using giant plasma membrane vesicles (GPMVs) isolated from RBL-2H3 cells. SiO₂ NPs cause a more serious membrane fluidity decrease at 37 °C than at 25 °C, which is revealed by the shift of Laurdan fluorescence emission and further quantified via forster resonance energy transfer (FRET) experiments. In addition, after the removal of 75 % cholesterol from the membrane, SiO₂ NPs caused a greater extent of membrane gelation. These results indicate that SiO₂ NPs prefer to interact with membranes that are more dynamic and less densely packed. Moreover, fluorescent experiments confirmed that the existence of phosphatidyl ethanolamine (PE) and phosphoinositide (PI) can mitigate NP-induced membrane gelation. Molecular dynamics simulation further demonstrated that SiO₂ NPs form hydrogen bonds with the terminal of PE or PI but with the -PO₄^-- group in the middle of phosphatidylcholine (PC). The bonding that occurs in the terminal gives less restriction of phospholipid movement and a weaker effect on membrane fluidity. This research provides both evidence and mechanisms of SiO₂ NP-induced membrane fluidity changes, which are helpful for understanding cell membrane damage and the biological effects of NPs.

Nucleic Acid-Loaded Lipid Nanoparticle Interactions with Model Endosomal Membranes

Lipid nanoparticles (LNPs) are important delivery systems for RNA-based therapeutics, yet the mechanism of their interaction with endosomal membranes remains unclear. Here, the interactions of nucleic acid-loaded LNPs that contain an ionizable lipid with models of the early and late endosomal membranes are studied, for the first time, using different reflectometry techniques. Novel insight is provided with respect to the subphase pH, the stage of the endosome, and the nature of the nucleic acid cargo. It is found that the insertion of lipids from the LNPs into the model membrane is greatest at pH 6.5 and 5.5, whereas at higher pH, lipid insertion is suppressed with evidence instead for the binding of intact LNPs, demonstrating the importance of the pH in the fusion of LNPs undergoing the endosomal pathway. Furthermore, and independently of the pH, the effect of the early- versus late-stage endosomal models is minimal, suggesting that the increased fluidity and anionic nature of the late endosome has little effect on the extent of LNP interaction. Last, there is greater nucleic acid delivery from LNPs containing mRNA than Poly(A), indicating that the extent of interaction can be tuned according to the nature of the nucleic acid cargo. Such new information on the relative impact of factors influencing nucleic acid delivery by LNP interactions with endosomal membranes is important in the design and tuning of vehicles with improved nucleic acid delivery capacities.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Influence of Potassium Ions on Act of Amphotericin B to the DPPC/Chol Mixed Monolayer at Different Surface Pressures

Amphotericin B (AmB) is an antifungal drug that rarely develops resistance. It has an affinity with the cholesterol on mammalian cell membranes, disrupting the structure and function of the membranes, which are also affected by potassium ions. However, the mechanism is unclear. In this paper, the Langmuir monolayer method was used to study the effects of potassium ions on the surface pressure–mean molecular area of isotherms, elastic modulus and the surface pressure–time curves of a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol (DPPC/Chol) monolayer and a DPPC/Chol/AmB monolayer. The morphology and thickness of the Langmuir–Blodgett films were studied via atomic force microscopy. The results showed that AmB can increase the mean molecular area of the DPPC/Chol mixed monolayer at low pressures (15 mN/m) but reduces it at high pressures (30 mN/m). The potassium ions may interfere with the effect of AmB in different ways. The potassium ions can enhance the influence of AmB on the stability of monolayer at low surface pressures, but weaken it at high surface pressures. The potassium ions showed significant interference with the interaction between AmB and the cholesterol-enriched region. The results are helpful for us to understand how the effect of amphotericin B on the phospholipid membrane is interfered with by potassium ions when amphotericin B enters mammalian cell membrane.

Monolayers of Cholesterol and Cholesteryl Stearate at the Water/Vapor Interface: A Physico-Chemical Study of Components of the Meibum Layer

Langmuir monolayers containing different amounts of cholesterol and cholesteryl stearate were studied at two different temperatures (24 °C and 35 °C). The main goal was to contribute towards the understanding of how the variations in the chemical composition may affect the physico-chemical properties of these specific lipid monolayers. The model mixture was chosen considering that cholesteryl esters are present in cell membranes and some other biological systems, including human tear lipids. Therefore, an investigation into the effect of the lipid monolayer composition on their interfacial properties may elucidate some of the fundamental reasons for the deficiencies in cell membranes and tear film functioning in vivo. The experimental results have shown that the molar ratio of the mixture plays a crucial role in the modulation of the Langmuir film properties. The condensing effects of the cholesterol and the interactions between the lipids in the monolayer were the main factors altering the monolayer response to dilatational deformation. The modification of the mixture compositions leads to significant changes in the Langmuir films and the mechanical performance, altering the ability of the monolayer to reduce the surface tension and the viscoelastic properties of the monolayers. This suggests that subtle modifications of the biomembrane composition may significantly alter its physiological function.

Altering model cell membranes by means of localized magnetic heating

Isolated iron oxide magnetic nanoparticles (MNPs), 12 nm in diameter, coated with oleic acid molecules as capping agents have been deposited by the Langmuir-Blodgett (LB) method onto a model cell membrane incorporating 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and Cholesterol (Chol) in the 1:1 ratio, which was also fabricated by the LB technique. Atomic Force Microscopy (AFM) experiments showed that the application of an alternating magnetic field results in the embedding of the MNPs through the phospholipidic layer. These experimental results reveal that the heating of individual MNPs may induce a local increase in the fluidity of the film with a large control of the spatial and temporal specificity.

Interaction of different lipoprotein types with cholesterol at the air/water interface

Cholesterol (Chol) interacts with lipoproteins, in order to be transported through the aqueous bloodstream. High density lipoproteins (HDL) and low density lipoproteins (LDL) transport cholesterol differently, a result that may be due to a difference in their interactions with cholesterol. Here, we investigated how the lipoprotein type affects the interaction with cholesterol by using a Langmuir trough and fluorescence microscope. We studied pure monolayers of 1) Chol, 2) LDL, and 3) HDL, and mixed monolayers of 1) Chol-LDL, and 2) Chol-HDL at air/water interfaces. Images of the Chol-LDL mixed monolayer showed many small sterol domains distributed in the non-sterol molecules (e.g. phospholids, proteins and lipids) of LDL. The sterol domains that were seen in the Chol-HDL mixed monolayer were larger in size but smaller in number than those seen in the Chol-LDL mixed monolayers. These images and the excess area, excess free energy, and free energy of mixing values obtained from the thermodynamic analysis of the surface pressure-area per molecule isotherms suggested that the cholesterol phase separated more from HDL than from LDL. Cholesterol was therefore concluded to interact with LDL better than with HDL. This more favorable interaction was explained by the presence of hydrophobic interactions between cholesterol and Apo-B, the major apoprotein of LDL.

Studies on the interfacial behavior of DPPC/DPPG mixed monolayers in the presence of fluoxetine

In this study, the interfacial behavior of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPC/DPPG) mixed monolayers with fluoxetine (FLX) in the subphase was investigated by a combination of the Langmuir-Blodgett technique and atomic force microscopy (AFM). It was found that DPPC/DPPG mixed monolayers showed different interfacial behaviors before and after addition of FLX in the subphase. The electrostatic interaction between FLX and lipids molecules destroys the homogeneity of the mixed monolayers and changes the arrangement of lipids molecules at the interface after addition of FLX in the subphase, thereby leading to an increase of compressibility and miscibility and a decrease in the stability of the mixed monolayers. The surface morphology of the mixed monolayers observed by AFM was different between without and with FLX in the subphase, indicating the penetration of FLX into the mixed monolayers. The present study has provided detailed information for further understanding the interactions of drugs with membrane lipids in other lipid monolayers.

Structure of DPPC Monolayers at the Air/Buffer Interface: A Neutron Reflectometry and Ellipsometry Study

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine, known as DPPC, at the air/water interface are extensively used as model systems of biomembranes and pulmonary surfactant. The properties of these monolayers have been mainly investigated by surface pressure–area isotherms coupled with different complementary techniques such as Brewster angle microscopy, for example. Several attempts using neutron reflectometry (NR) or ellipsometry have also appeared in the literature. Here, we report structural information obtained by using NR and ellipsometry on DPPC monolayers in the liquid condensed phase. On one side, NR can resolve the thickness of the aliphatic tails and the degree of hydration of the polar headgroups. On the other side, ellipsometry gives information on the refractive index and, therefore, on the physical state of the monolayer. The thickness and surface excess obtained by multiple-angle-of-incidence ellipsometry (MAIE) is compared with the results from NR measurements yielding a good agreement. Besides, a novel approach is reported to calculate the optical anisotropy of the DPPC monolayer that depends on the orientation of the aliphatic chains. The results from both NR and ellipsometry are also discussed in the context of the existing results for DPPC monolayers at the air/water interface. The differences observed are rationalized by the presence of buffer molecules interacting with phospholipids.

Impact of Engineered Carbon Nanodiamonds on the Collapse Mechanism of Model Lung Surfactant Monolayers at the Air-Water Interface

Understanding interactions between inhaled nanoparticles and lung surfactants (LS) present at the air-water interface in the lung, is critical to assessing the toxicity of these nanoparticles. Specifically, in this work, we assess the impact of engineered carbon nanoparticles (ECN) on the ability of healthy LS to undergo reversible collapse, which is essential for proper functioning of LS. Using a Langmuir trough, multiple compression-expansion cycles are performed to assess changes in the surface pressure vs. area isotherms with time and continuous cyclic compression-expansion. Further, theoretical analysis of the isotherms is used to calculate the ability of these lipid systems to retain material during monolayer collapse, due to interactions with ECNs. These results are complemented with fluorescence images of alterations in collapse mechanisms in these monolayer films. Four different model phospholipid systems, that mimic the major compositions of LS, are used in this study. Together, our results show that the ECN does not impact the mechanism of collapse. However, the ability to retain material at the interface during monolayer collapse, as well as re-incorporation of material after a compression-expansion cycle is altered to varying extent by ECNs and depends on the composition of the lipid mixtures.

Surface Activities of a Lipid Analogue Room-Temperature Ionic Liquid and Its Effects on Phospholipid Membrane

There are great efforts of synthesizing imidazolium-based ionic liquids (ILs) for developing new antibiotics as these molecules have shown strong antibacterial activities. Compared to a single-hydrocarbon-chained IL, the lipid analogues (LAs) with two chains are more effective. In the present study, the LA molecule ^MeIm(COOH)^Me(Oleylamine)Iodide has been synthesized and its surface activities along with the effectiveness in restructuring of a model cellular membrane have been quantified. The molecule is found to be highly surface active as estimated from the area-pressure isotherm of a monolayer of the molecules formed at the air-water interface. The X-ray reflectivity (XRR) studies of a monolayer dip-coated on a hydrophilic substrate have shown the structural properties of the layer which resembles to those of unsaturated phospholipids. The LA molecules are observed to fluidize a phospholipid bilayer formed by the saturated lipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). At a lower surface pressure, the lipid monolayer of DPPC has exhibited a thickening effect at a low concentration of added LA and a thinning effect at higher concentration. However, at a high surface pressure of the monolayer, the thickness is found to decrease monotonically. The in-plane pressure-dependent interaction of LA molecules with model cellular membrane and the corresponding perturbation in the structure and physical properties of the membrane may be linked to the strong lysing effect of these types of molecules.

Influence of Carbon Nanosheets on the Behavior of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

Carbon nanomaterials are widespread in the atmospheric aerosol as a result of the combustion processes and their extensive industrial use. This has raised many question about the potential toxicity associated with the inhalation of such nanoparticles, and its incorporation into the lung surfactant layer. In order to shed light on the main physical bases underlying the incorporation of carbon nanomaterials into lung surfactant layers, this work has studied the interaction at the water/vapor interface of carbon nanosheets (CN) with Langmuir monolayers of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), with this lipid being the main component of lung surfactant layers and responsible of some of the most relevant features of such film. The incorporation of CN into DPPC Langmuir monolayers modifies the lateral organization of the DPPC at the interface, which is explained on the basis of two different effects: (i) particles occupy part of the interfacial area, and (ii) impoverishment of the lipid composition of the interface due to lipid adsorption onto the CN surface. This results in a worsening of the mechanical performance of the monolayers which may present a negative impact in the physiological performance of lung surfactant. It would be expected that the results obtained here can be useful as a step toward the understanding of the most fundamental physico-chemical bases associated with the effect of inhaled particles in the respiratory cycle.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.

Cholesterol Regulates the Incorporation and Catalytic Activity of Tissue-Nonspecific Alkaline Phosphatase in DPPC Monolayers

Matrix vesicles (MVs) are a special class of extracellular vesicles that drive bone and dentin mineralization by providing the essential enzymes and ions for the nucleation and propagation of mineral crystals. Tissue-nonspecific alkaline phosphatase (TNAP) is an integral protein of MV membrane and participates in biomineralization by hydrolyzing extracellular pyrophosphate (PP_i), a strong mineralization inhibitor, and forming inorganic phosphate (P_i), necessary for the growth of mineral crystals inside MVs and their propagation once released in the extracellular matrix. MV membrane is enriched in cholesterol (CHOL), which influences the incorporation and activity of integral proteins in biologic membranes; however, how CHOL controls the incorporation and activity of TNAP in MV membrane has not yet been elucidated. In the present study, Langmuir monolayers were used as a MV membrane biomimetic model to assess how CHOL affects TNAP incorporation and activity. Surface pressure-area (π-A) isotherms of binary dipalmitoilphosphatidylcholine (DPPC)/CHOL monolayers showed that TNAP incorporation increases with CHOL concentration. Infrared spectroscopy showed that CHOL influences the conformation and orientation of the enzyme. Optical-fluorescence micrographs of the monolayers revealed the tendency of TNAP to incorporate into CHOL-rich microdomains. These data suggest that TNAP penetrates more efficiently and occupies a higher surface area into monolayers with a lower CHOL concentration due to the higher membrane fluidity. However, the quantity of enzyme transferred to solid supports as well as the enzymatic activity were higher using monolayers with a higher CHOL concentration due to increased rigidity that changes the enzyme orientation at the air-solid interface. These data provide new insights regarding the interfacial behavior of TNAP and CHOL in MVs and shed light on the biochemical and biophysical processes occurring in the MV membrane during biomineralization at the molecular level.

Effect of Fe3O4 Nanoparticles on Mixed POPC/DPPC Monolayers at Air-Water Interface

Fe₃O₄ nanoparticles (NPs) as a commonly used carrier in targeted drug delivery are widely used to carry drugs for the treatment of diseases. However, the mechanism of action of between Fe₃O₄ NPs and biological membranes is still unclear. Therefore, this article reports the influence of hydrophilic and hydrophobic Fe₃O₄ NPs on mixed 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) that were studied using the Langmuir-Blodgett (LB) film technique and an atomic force microscope (AFM). From surface pressure-area (π-A) isotherms, we have calculated the compression modulus. The results showed that hydrophobic Fe₃O₄ NPs enlarged the liquid-expanded (LE) and liquid-condensed (LC) phase of the mixed POPC/DPPC monolayers. The compressibility modulus of the mixed POPC/DPPC monolayer increases for hydrophilic Fe₃O₄ NPs, but the opposite happens for the hydrophobic Fe₃O₄ NPs. The adsorption of hydrophobic Fe₃O₄ NPs in mixed POPC/DPPC monolayers was much more than the hydrophilic Fe₃O₄ NPs. The interaction of hydrophilic Fe₃O₄ NPs with the head polar group of the mixed lipids increased the attraction force among the molecules, while the interaction of hydrophobic Fe₃O₄ NPs with the tail chain of the mixed lipids enhanced the repulsive force. The morphology of the monolayers was observed by AFM for validating the inferred results. This study is of great help for the application of Fe₃O₄ NPs in biological systems.

Emerging investigator series: exploring the surface properties of aqueous aerosols coated with mixed surfactants

Mixed Langmuir monolayers of cholesterol with both saturated and unsaturated fatty acids, stearic acid (SA), and oleic acid (OA) spread at the air-seawater surface were studied. The phase behavior, molecular interaction, and conformational order of the monolayers were investigated by surface pressure-area (π-A) isotherms and infrared reflection-absorption spectroscopy (IRRAS) measurements. The thermodynamic parameters of the mixed films, including excess molecular area and excess Gibbs free energy were calculated by using the isotherm data. The interaction between SA (or OA) and cholesterol varied with the molar fraction of the fatty acids and surface pressure. OA/chol monolayers showed the characteristics of miscibility, but they acted as nonideal systems. Cholesterol has been observed to have a stabilizing effect on OA monolayers. The negative values of the excess Gibbs free energy in the entire composition range demonstrated that mixed OA/chol monolayers were thermodynamically stable. IRRAS spectra showed that mixing with cholesterol changes the ordering of fatty acid monolayers at the air-seawater surface. The findings provide general information regarding the structural changes in the monolayer induced by lateral packing. These results help in the understanding of the mixing behavior of fatty acids and cholesterol and provide insights into the fate of the mixed-monolayer-coated sea salt aerosol in the ocean environment.

Thermodynamic Characterization of Mixed Monolayers of a Novel Oxazolidine Derivative and Phospholipids

Oxazolidine derivatives (OxD) are five ring-membered compounds that contain at least one oxygen and nitrogen in their molecular structure. OxD are known due to several therapeutic activities such as anticancer and antibiotic properties. In this paper, we performed a thermodynamic analysis of the mixed films composed by dipalmitoylphosphatidylglycerol (DPPG), dipalmitoylphosphoethanolamine (DPPE), dipalmitoyl phosphatidylcholine (DPPC) or L-α phosphatidylcholine (PC) with a novel oxazolidine derivate (OxD). Relevant thermodynamic parameters such as excess areas (ΔAE), excess free energies (ΔG), and Gibbs free energy of mixing (AG^mix) were derived from the surface pressure data. The topographical analysis was performed using atomic force microscopy. Based on the calculated values of the thermodynamic parameters, we observed that the miscibility of the mixed films was directly dependent on their composition. DPPG/OxD and DPPE/OxD systems present the best-mixed character at low pressures at OxD molar fraction equivalent to 0.25.

Phase Behavior of GM1-Containing DMPC-Cholesterol Monolayer: Experimental and Theoretical Study

Organization and distribution of lipids in cellular membranes play an important role in a diverse range of biological processes, such as membrane trafficking and signaling. Here, we present the combined experimental and simulated results to elucidate the phase behavioral features of ganglioside monosialo 1 (GM1)-containing mixed monolayer of the lipids 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) and cholesterol (CHOL). Two monolayers having compositions DMPC-CHOL and GM1-DMPC-CHOL are investigated at air-water and air-solid interfaces using Langmuir-Blodgett experiments and scanning electron microscopy (SEM), respectively, to ascertain the phase behavior change of the monolayers. Surface pressure isotherms and SEM imaging of domain formation indicate that addition of GM1 to the monolayer at low surface pressure causes a fluidization of the system but once the system attains the surface pressure corresponding to its liquid-condensed phase, the monolayer becomes more ordered than the system devoid of GM1 and interacts among each other more cooperatively. Besides, the condensing effect of cholesterol on the DMPC monolayer was also verified by our experiments. Apart from these, the effects induced by GM1 on the phase behavior of the binary mixture of DMPC-CHOL were studied with and without applying liquid-expanded (L_E)-liquid-condensed (L_C) equilibrium surface pressure using molecular dynamics (MD) simulation. Our molecular dynamics (MD) simulation results give an atomistic-level explanation of our experimental findings and furnish a similar conclusion.

Physico-chemical foundations of particle-laden fluid interfaces

Particle-laden interfaces are ubiquitous nowadays. The understanding of their properties and structure is essential for solving different problems of technological and industrial relevance; e.g. stabilization of foams, emulsions and thin films. These rely on the response of the interface to mechanical perturbations. The complex mechanical response appearing in particle-laden interfaces requires deepening on the understanding of physico-chemical mechanisms underlying the assembly of particles at interface which plays a central role in the distribution of particles at the interface, and in the complex interfacial dynamics appearing in these systems. Therefore, the study of particle-laden interfaces deserves attention to provide a comprehensive explanation on the complex relaxation mechanisms involved in the stabilization of fluid interfaces.

PAMAM dendrimer - cell membrane interactions

PAMAM dendrimers have been conjectured for a wide range of biomedical applications due to their tuneable physicochemical properties. However, their application has been hindered by uncertainties in their cytotoxicity, which is influenced by dendrimer generation (i.e. size and surface group density), surface chemistry, and dosage, as well as cell specificity. In this review, biomedical applications of polyamidoamine (PAMAM) dendrimers and some related cytotoxicity studies are first outlined. Alongside these in vitro experiments, lipid membranes such as supported lipid bilayers (SLBs), liposomes, and Langmuir monolayers have been used as cell membrane models to study PAMAM dendrimer-membrane interactions. Related experimental and theoretical studies are summarized, and the physical insights from these studies are discussed to shed light on the fundamental understanding of PAMAM dendrimer-cell membrane interactions. We conclude with a summary of some questions that call for further investigations.

Investigation of Surface Behavior of DPPC and Curcumin in Langmuir Monolayers at the Air-Water Interface

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and a mixture of DPPC with curcumin (CUR) have been investigated at the air-water interface through a combination of surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing the correlation data of mean molecular areas, the compressibility coefficient, and other thermodynamic parameters, we obtained that the interaction between the two components perhaps was mainly governed by the hydrogen bonding between the amino group of DPPC and the hydroxyl groups of CUR. CUR markedly affected the surface compressibility, the thermodynamic stability, and the thermodynamic phase behaviors of mixed monolayers. The interaction between CUR and DPPC was sensitive to the components and the physical states of mixed monolayers under compression. Two-dimensional phase diagrams and interaction energies indicated that DPPC and CUR molecules were miscible in mixed monolayers. AFM images results were in agreement with these analyses results of experimental data. This study will encourage us to further research the application of CUR in the biomedical field.

Effect of the Incorporation of Nanosized Titanium Dioxide on the Interfacial Properties of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

The effect of the incorporation of hydrophilic titanium dioxide (TiO₂) nanoparticles on the interfacial properties of Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) has been evaluated combining interfacial thermodynamic studies, dilatational rheology, and Brewster angle microscopy (BAM). The results show that the TiO₂ nanoparticles are able to penetrate DPPC layers, modifying the organization of the molecules and, consequently, the phase behavior and viscoelastic properties of the systems. Measurements of dilational viscoelasticity against the frequency have been performed, using the oscillatory barrier method, at different values of the surface pressure corresponding to different degrees of compression of the monolayer. The presence of TiO₂ nanoparticles also affects the dynamic response of the monolayer modifying both the quasi-equilibrium dilatational elasticity and the high frequency limit of the viscoelastic modulus. The principal aim of this work is to understand the fundamental physicochemical bases related to the incorporation of specific nanoparticles of technological interest into the interfacial layer with biological relevance such as phospholipid layers. This can provide information on potential adverse effects of nanoparticles for health and the environment.

Applications of Brewster angle microscopy from biological materials to biological systems

Brewster angle microscopy (BAM) is a powerful technique that allows for real-time visualization of Langmuir monolayers. The lateral organization of these films can be investigated, including phase separation and the formation of domains, which may be of different sizes and shapes depending on the properties of the monolayer. Different molecules or small changes within a molecule such as the molecule's length or presence of a double bond can alter the monolayer's lateral organization that is usually undetected using surface pressure-area isotherms. The effect of such changes can be clearly observed using BAM in real-time, under full hydration, which is an experimental advantage in many cases. While previous BAM reviews focused more on selected compounds or compared the impact of structural variations on the lateral domain formation, this review provided a broader overview of BAM application using biological materials and systems including the visualization of amphiphilic molecules, proteins, drugs, extracts, DNA, and nanoparticles at the air-water interface.