A sensitive quantum dots-based "OFF-ON" fluorescent sensor for ruthenium anticancer drugs and ctDNA

High-efficient nickel-doped lignin carbon dots as a fluorescent and smartphone-assisted sensing platform for sequential detection of Cr(VI) and ascorbic acid

Using lignin as a raw material to prepare fluorescent nanomaterials represents a significant pathway toward the high-value utilization of waste biomass. In this study, Ni-doped lignin carbon dots (Ni-LCDs) were rapidly synthesized with a yield of 63.22 % and a quantum yield of 8.25 % using a green and simple hydrothermal method. Exploiting the inner filter effect (IFE), Cr(VI) effectively quenched the fluorescence of the Ni-LCDs, while the potent reducing agent ascorbic acid (AA) restored the quenched fluorescence, thus establishing a highly sensitive fluorescence switch sensor platform for the sequential detection of Cr(VI) and AA. Importantly, the integration of a smartphone facilitated the portability of Cr(VI) and AA detection, enabling on-site, in-situ, and real-time monitoring. Ultimately, the developed fluorescence and smartphone-assisted sensing platform was successfully applied to detect Cr(VI) in actual water samples and AA in various fruits. This study not only presents an efficient method for the conversion and utilization of waste lignin but also broadens the application scope of the CDs in the field of smart sensors.

Luminescent carbon dots versus quantum dots and gold nanoclusters as sensors

Ultra-small nanoparticles, including quantum dots, gold nanoclusters (AuNCs) and carbon dots (CDs), have emerged as a promising class of fluorescent material because of their molecular-like properties and widespread applications in sensing and imaging. However, the fluorescence properties of ultra-small gold nanoparticles (i.e., AuNCs) and CDs are more complicated and well distinguished from conventional quantum dots or organic dye molecules. At this frontier, we highlight recent developments in the fundamental understanding of the fluorescence emission mechanism of these ultra-small nanoparticles. Moreover, this review carefully analyses the underlying principles of ultra-small nanoparticle sensors. We expect that this information on ultra-small nanoparticles will fuel research aimed at achieving precise control over their fluorescence properties and the broadening of their applications.

Preparation of temperature-responsive nanomicelles with AIE property as fluorescence probe for detection of Fe3+ and Fe2

Temperature-responsive nanomicelles with aggregation induced emission (AIE) property were prepared by the host-guest complexation of ferrocene functionalized tetraphenyl (TPE-Fc) and β-cyclodextrin-poly (N-isopropylacrylamide) (β-CD-(PNIPAM)₇). The AIE chromophore TPE-Fc bound to the hydrophobic cavity of cyclodextrin serves as the core of micelles, and temperature sensitive PNIPAM serves as the shell to give the micelles good solubility. The size of the nanomicelles is about 100 nm. At the excitation wavelength of 340 nm, the strongest fluorescent emission peak was 421 nm. The introduction of cyclodextrin star polymer increased the fluorescence intensity of nanomicelles, thus improving the recognition of probe to Fe³⁺ and Fe²⁺. The fluorescent probe can quickly detect Fe³⁺ and Fe²⁺ in water within 5 min even in the presence of various interfering ions. The detection limits of Fe³⁺ and Fe²⁺ were 1.04 μM and 0.78 μM, respectively in the range of 10-90 μM. The formation of complex between the probe and Fe³⁺/Fe²⁺ was supported by Job's plot. The probe was successfully applied to the detection of Fe³⁺and Fe²⁺ in actual water sample with a good recovery. In addition, a possible sensing mechanism for the interaction of iron ions with amide bond groups of nanomicelles was proposed.

Study the Adsorption of Letrozole Drug on the Silicon Doped Graphdiyne Monolayer: a DFT Investigation

In the current study, by employing first-principles computations, the adsorption behavior of letrozole (LET) was investigated on the pristine graphdiyne nanosheet (GDY) as well as Si-doped graphdiyne (SiGDY). According to the adsorption energy, charge transfer value, and the change in the bang gap energy, the tendency of the pristine GDY towards LET is insignificant. However, the interaction of LET with SiGDY was strong and the adsorption energy was approximately − 19.20 kcal/mol. In addition, the associated electrical conductivity with SiGDY increased by approximately 23.53 % following the adsorption of LET. The results show that SiGDY can be employed as an electronic sensor to detect LET. Furthermore, LET is detected by SiGDY in the water phase based on the magnitude of solvation energy. Finally, a considerable charge-transfer between LET and SiGDY is a precondition for the adsorption of the LET molecule with proper binding energies, which delivers the Si atoms with a significant positive charge.

Fluorescent reversible regulation of cysteamine-capped ZnSe quantum dots successively induced by photoinduced electron transfer of herring sperm DNA and intercalation binding of ethidium bromide

A fluorescent reversible regulation was studied by fluorescence spectra, ultraviolet-visible spectra in the combination of molecular docking, which based on the photoinduced electron transfer(PET) from hsDNA (herring sperm DNA) to CA (cysteamine)-capped ZnSe QDs (quantum dots) and intercalation of ethidium bromide (EB) into hsDNA. It was proven that the QDs bound with the adding hsDNA by electrostatic force and formed 1:1 hsDNA-QDs complexes, leading to the PET from hsDNA to QDs, and consequently the fluorescence quenching of the QDs; with EB being added in the complex solution, it bound with hsDNA by intercalation interaction and caused hsDNA releasing from hsDNA-QDs complex with forming 2.5:1 EB-hsDNA complex, leading to the recovery of fluorescence, based on the greater binding constant (1.74 × 106 L·mol-1) of hsDNA with the embedded EB comparing to that of QDs with the captured hsDNA (4.25 × 104 L·mol-1). A good linear relationship existed between the fluorescence recovery yield and the EB concentrations under the range of 1.0-12.0 × 10-6 mol·L-1 with bare interference of related substances. This work provided some useful insights into the study of binding mechanism between DNAs with their intercalators and fluorescence bi-direction regulation, and showed great potential for the determination of trace EB.

One-step preparation of red-emitting carbon dots for visual and quantitative detection of copper ions

A one-step solvothermal method for the preparation of carbon dots with red fluorescence (R-CDs) was put forward, in which sodium citrate and formamide were chosen as precursors, while formamide was adopted as the solvent. The fluorescence emission peak of the as-prepared R-CDs remained the same (600 nm) when the excitation wavelength increased from 490 nm to 560 nm, and the fluorescence quantum yield is 35.3%. Furthermore, the fluorescence intensity of the as-prepared R-CDs could be selectively quenched by copper ions, and the mechanism of Cu²⁺ quenching R-CDs is the combination of static and dynamic quenching. As a result, the R-CDs were applied for the construction of a fluorescent sensor without any modification for the quantitative and visual detection of copper ions, which is a typical contaminant in water. The limit of detection for the fluorescent sensor was as low as 5 nmol/L, and it can be used to fast and directly confirm whether the content of copper ions in drinking water meets the criteria of the United States Environmental Protection Agency and the World Health Organization.

Upconversion nanoparticle and gold nanocage satellite assemblies for sensitive ctDNA detection in serum

A rapid molecular diagnostic technique targeting circulating tumor DNA (ctDNA) has become one of the most clinically significant liquid biopsy methods for non-invasive and timely diagnosis of cancer. Herein, a sensitive detection system of ctDNA based on a fluorescence resonance energy transfer (FRET) system using upconversion nanoparticles (UCNPs) and gold nanocages (AuNCs) was constructed. Through the doping of Yb and Tm ions, the excitation and emission wavelengths of UCNPs were adjusted to 980 nm and 806 nm, respectively. Subsequently, UCNPs and AuNCs with the corresponding wavelength absorption were linked by complementary pairing of surface-modified DNA to form near-infrared fluorescent nanoprobes (NIR probes). Targeting DNA mutation recognition and signal transduction were realized by using NIR probes through the toehold-mediated strand displacement reaction. This method could detect a single point mutation of the KRAS gene with a wide detection range from 5 pM to 1000 pM and the limit of detection reached 6.30 pM. More importantly, the stable and highly specific NIR probes could be directly used in the serum environment without complicated pretreatment and amplification processes in advance. It could be envisioned that this specific and sensitive ctDNA detection strategy has great potential in clinical diagnosis and monitoring of diverse malignant tumors.

An efficient fluorescence resonance energy transfer system from quantum dots to graphene oxide nano sheets: Application in a photoluminescence aptasensing probe for the sensitive detection of diazinon

In this paper a new aptasensor with high-sensitivity, and high-specificity for detection of diazinon, was discovered, based on fluorescence resonance energy transfer (FRET) between quantum dot (QD) as a donor and graphene oxide (GO) as an acceptor. l-cysteine capped CdS QDs/DF20 aptamer bioconjugates were successfully synthesized. GO was also attached to aptamers and photoluminescence quenching was obtained through FRET. By adding target diazinon to the bioconjugates containing GO, photoluminescence recovery was detected due to detachment of GO from the aptamer as a result of the difference in affinity for the aptamer. The detection limit of the biosensor was 0.13 nM and the linearity was maintained from 1.05 to 206 nM. Other pesticides and herbicides did not contribute to photoluminescence recovery due to lack of binding affinity for the aptamers, which demonstrates the selectivity of the biosensor. The results show the applicability of the aptasensor for monitoring diazinon in environmental and agricultural samples.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

A novel fluorescent sensor for water in organic solvents based on dynamic quenching of carbon quantum dots

A novel fluorescent sensor for water in organic solvents was proposed based on dynamic quenching of carbon quantum dots.

The application of nanoparticles in diagnosis and theranostics of gastric cancer

Gastric cancer is the fourth most common cancer and the second leading cause of cancer related death worldwide. For the diagnosis of gastric cancer, apart from regular systemic imaging, the locoregional imaging is also of great importance. Moreover, there are still other ways for the detecting of gastric cancer, including the early detection of gastric cancer by endoscopy, the detection of gastric-cancer related biomarkers and the detection of circulating tumor cells (CTCs) of gastric cancer. However, conventional diagnostic methods are usually lack of specificity and sensitivity. Nanoparticles provide many benefits in the diagnosis of gastric cancer. Besides, nanoparticles are capable of integrating the functions of diagnosis and treatment together (theranostics). In this paper, we reviewed the applications of nanoparticles in diagnosis and theranostics of gastric cancer in the above mentioned aspects.

Multispectroscopic Investigation of the Interaction Between two Ruthenium(II) Arene Complexes of Curcumin Analogs and Human Serum Albumin

The interaction between two ruthenium(II) arene complexes of curcumin analogs and human serum albumin (HSA) was systematically investigated by multispectroscopic techniques. The fluorescence spectral results indicated that two complexes quenched the intrinsic fluorescence of HSA through static quenching mode. The quenching constants and the corresponding thermodynamic parameters at different temperatures were calculated. The binding interactions of two complexes with HSA resulted in the complex formation of complex-HSA, and the van der Waals interactions and hydrogen bond interactions played major roles in the complex stabilization. The distances between HSA and two complexes were obtained according to fluorescence resonance energy transfer theory. The site competitive replacement experiments illustrated that two complexes mainly bounded with HSA on site I. The results of synchronous fluorescence spectra, three-dimensional fluorescence spectra, FT-IR spectra, and circular dichroism spectra indicated that the secondary structure of HSA was changed at the present of two complexes. The results of mass spectrometry further validated the binding interaction and the binding number between two complexes and HSA.

In vitro interaction investigation between three Ru(ii) arene complexes and human serum albumin: structural influences

In vitro interactions between three Ru(ii) arene complexes and human serum albumin were systematically investigated by multi-spectroscopic techniques.

Nanosensors for early cancer detection and for therapeutic drug monitoring

The use of nanotechnology for drug delivery in cancer therapy has raised high expectations. Additionally, the use of nanomaterials in sensors to extract and detect tumor specific biomarkers, circulating tumor cells, or extracellular vesicles shed by the tumor holds the promise to detect cancer much earlier and hence improve long-term survival of the patients. Moreover, the monitoring of the anticancer drug concentration, which has a narrow therapeutic window, will allow for a personalized dosing of the drug and will lead to improved therapeutic outcome and life quality of the patient. This review will provide an overview on the use of nanosensors for the early diagnosis of cancer and for the therapeutic drug monitoring, giving some examples. We envision nanosensors to make significant improvements in the cancer management as easy-to-use point-of-care devices for a broad population of users.

Binding properties of palmatine to DNA: spectroscopic and molecular modeling investigations

Palmatine, an isoquinoline alkaloid, is an important medicinal herbal extract with diverse pharmacological and biological properties. In this work, spectroscopic and molecular modeling approaches were employed to reveal the interaction between palmatine and DNA isolated from herring sperm. The absorption spectra and iodide quenching results indicated that groove binding was the main binding mode of palmatine to DNA. Fluorescence studies indicated that the binding constant (K) of palmatine and DNA was ~ 10(4)L·mol(-1). The associated thermodynamic parameters, ΔG, ΔH, and ΔS, indicated that hydrogen bonds and van der Waals forces played major roles in the interaction. The effects of chemical denaturant, thermal denaturation and pH on the interaction were investigated and provided further support for the groove binding mode. In addition to experimental approaches, molecular modeling was conducted to verify binding pattern of palmatine-DNA.

A ratiometric nanosensor based on fluorescent carbon dots for label-free and highly selective recognition of DNA

A ratiometric nanosensor based on fluorescent carbon dots for label-free and highly selective recognition of DNA.

Recent progress in quantum dot based sensors

Recent progress in quantum dot (QD) based chemo- and biosensors for various applications is summarized.

Silica/CdTe/silica fluorescent composite nanoparticles via electrostatic assembly as a pH ratiometer

Sandwich-like colloidal silica/CdTe quantum dots/silica nanoparticles are fabricated by efficient electrostatic assembly. They show remarkable stabilities and bright fluorescence, affording the application of pH ratiometric nanosensor.

Combined spectroscopy and cyclic voltammetry investigates the interaction between [(η6-p-cymene)Ru(benzaldehyde-N(4)-phenylthiosemicarbazone)Cl]Cl anticancer drug and human serum albumin

The interaction between Ru anticancer drug and HSA was investigated systematically under physiological conditions.