Selective encapsulation of cesium ions using the cyclic peptide moiety of surfactin: Highly efficient removal based on an aqueous giant micellar system

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

Evaluation of Antiradical and Antioxidant Activities of Lipopeptides Produced by Bacillus subtilis Strains

This study investigated the antiradical and antioxidant potential of the three families of lipopeptides (i.e., surfactin, mycosubtilin, and plipastatin/fengycin) produced by Bacillus subtilis strains. The antiradical/antioxidant activities of highly purified lipopeptides were studied in acellular models using a 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical, superoxide anion (O 2 . - ), hydrogen peroxide, (H2O2) and hydroxyl radical (HO.). At a lipopeptide concentration of 500 mg.L-1, the maximum inhibition of DPPH reached 22.88% (obtained for plipastatin). Moreover, the scavenging effects ofO 2 . - , H2O2, and HO. at the highest concentration tested (250 mg.L-1) were found to be 6, 21, and 3% for surfactin, 19, 9, and 15% for mycosubtilin, 21, 18, and 59% for plipastatin, 21, 31, and 61% for the mixture of surfactin/plipastatin, and 13, 16, and 15% for the mixture of surfactin/mycosubtilin, respectively. These results showed that plipastatin was the best candidate due to its antioxidant activities.

Metallosurfactants Consisting of Amphiphilic Ligands and Transition Metals: Structure, Bonding, Reactivity, and Self-assembling Property

Metallosurfactants are emerging as a relatively new class of surfactants whose ligand moieties bind to various transition metals. Because transition metal centers are incorporated into the surfactant frameworks, they can form various self-assembled structures with metallic interfaces such as micelles, vesicles, and lyotropic liquid crystals. To reduce the lability of transition metal complexes under aqueous conditions, various amphiphilic ligands have been developed as surfactant frameworks. This review discusses some aspects of the design and chemical structures of amphiphilic ligands, as well as focus on various functions and types of chemical bonds present in metallosurfactants.

A critical review on the environmental application of lipopeptide micelles

The importance of lipopeptide micelles in environmental applications has been highlighted. These vessels exhibit various sizes, shapes, and surface properties under different environmental conditions. An in-depth understanding of the tunable assembling behavior of biosurfactant micelles is of great importance for their applications. However, a systematic review of such behaviors with assorted micro/nano micellar structures under given environmental conditions, particularly under low temperature and high salinity, remains untapped. Such impacts on their environmental applications have yet to be summarized. This review tried to fill the knowledge gaps by providing a comprehensive summary of the recent knowledge advancement in genetically regulated lipopeptides production, micelles associated decontamination mechanisms in low temperature and high salinity environments, and up-to-date environmental applications. This work is expected to deliver valuable insights to guide lipopeptide design and discovery. The mechanisms concluded in this study could inspire the forthcoming research efforts in the advanced environmental application of lipopeptide micelles.

Sustainable Remediation of Contaminated Soil Using Biosurfactants

Selection of the most appropriate remediation technology must coincide with the environmental characteristics of the site. The risk to human health and the environment at the site must be reduced, and not be transferred to another site. Biosurfactants have the potential as remediation agents due to their biodegradability, low toxicity, and effectiveness. Selection of biosurfactants should be based on pollutant characteristics and properties, treatment capacity, costs, regulatory requirements, and time constraints. Moreover, understanding of the mechanisms of interaction between biosurfactants and contaminants can assist in selection of the appropriate biosurfactants for sustainable remediation. Enhanced sustainability of the remediation process by biosurfactants can be achieved through the use of renewable or waste substrates, in situ production of biosurfactants, and greener production and recovery processes for biosurfactants. Future research needs are identified.

Ion recognition properties of new pyridine-2,6-dicarboxamide bearing propeller-like pendant residues: multi-spectroscopic approach

Abstract

The synthesis and ion binding properties of new amide derived from propeller-like tris(2-pyridyl)amine and 2,6-pyridinedicarboxylic acid chloride were described. Amide binds divalent metal cations: copper(II), nickel(II), zinc(II), and lead(II) in acetonitrile. In acetonitrile:water mixture (9:1 v/v) amide interacts only with copper(II) and nickel(II) cations forming complexes of 1:1 stoichiometry. It was found that the introduction of bulky, nitrogen donor atom bearing pendant groups can influence coordination mode of pyridine-2,6-dicarboxamides. The probable model of ligand-ion interactions is proposed on the basis of 1H NMR and FT-IR spectroscopy.

Graphic abstract

Surface Activity and Ca2+-Dependent Aggregation Property of Lichenysin Produced by Bacillus licheniformis NBRC 104464

Bacillus licheniformis NBRC 104464 produces a cyclic lipopeptide different from surfactin. After we performed liquid chromatography fractionation and purification, we used structural analyses to identify the cyclic lipopeptide as lichenysin. Surface tension measurements of lichenysin sodium salt in water yielded a critical micelle concentration (CMC) of 1.0×10^-5 M. The surface tension at the CMC was 28.9 mN/m. Comparative analysis of Ca²⁺-influenced micellar aggregation of lichenysin and surfactin revealed that the formation rate of the lichenysin-Ca²⁺ complex aggregate remained low up to a [Ca²⁺]/[lichenysin] molar ratio of 80, whereas the surfactin-Ca²⁺ complex formed micellar aggregates at the same molar ratio. Further excessive addition of Ca²⁺ to the micellar solution of lichenysin induced higher turbidity than surfactin.

pH-induced conformational change of natural cyclic lipopeptide surfactin and the effect on protease activity

The cyclic lipopeptide surfactin (SF) is one of the promising environmental friendly biosurfactants abundantly produced by microorganisms such as Bacillus subtilis. SF shows excellent surface properties at various pH, together with lower toxicity and higher biodegradability than commonly used petroleum-based surfactants. However, the effect of the dissociation degree of SF on self-assembly is still incompletely understood, even though two acidic amino acid residues (Asp and Glu) are known to influence eventual surface and biological functions. Here, we report changes in the secondary structure of SF induced by increased pH, and the effect on protease activity. We found that the β-sheet and β-turn formation of SF are significantly enhanced through increased dissociation of Asp and Glu as revealed by a titration experiment of SF solution to estimate apparent pK₁ and pK₂ values together with circular dichroism spectroscopy. We also studied the activity of the common detergent enzyme subtilisin in SF solution at above its pK₂ (pH 7.6) to understand the role of the dissociation degree in the interaction with the protein. The mixing of SF having a unique cyclic topological feature with subtilisin suppressed the decrease in protease activity observed in the presence of synthetic surfactants such as sodium dodecyl sulfate and polyoxyethylene alkyl ether. Thus, SF has great potential for use in laundry detergent formulations, to improve the stability and reliability of detergent enzymes.

Micelles as Soil and Water Decontamination Agents

Contaminated soil and water pose a serious threat to human health and ecosystem. For the treatment of industrial effluents or minimizing their detrimental effects, preventive and remedial approaches must be adopted prior to the occurrence of any severe environmental, health, or safety hazard. Conventional treatment methods of wastewater are insufficient, complicated, and expensive. Therefore, a method that could use environmentally friendly surfactants for the simultaneous removal of both organic and inorganic contaminants from wastewater is deemed a smart approach. Surfactants containing potential donor ligands can coordinate with metal ions, and thus such compounds can be used for the removal of toxic metals and organometallic compounds from aqueous systems. Surfactants form host-guest complexes with the hydrophobic contaminants of water and soil by a mechanism involving the encapsulation of hydrophobes into the self-assembled aggregates (micelles) of surfactants. However, because undefined amounts of surfactants may be released into the aqueous systems, attention must be paid to their own environmental risks as well. Moreover, surfactant remediation methods must be carefully analyzed in the laboratory before field implementation. The use of biosurfactants is the best choice for the removal of water toxins as such surfactants are associated with the characteristics of biodegradability, versatility, recovery, and reuse. This Review is focused on the currently employed surfactant-based soil and wastewater treatment technologies owing to their critical role in the implementation of certain solutions for controlling pollution level, which is necessary to protect human health and ensure the quality standard of the aquatic environment.