PEGylated and poloxamer-modified chitosan nanoparticles incorporating a lysine-based surfactant for pH-triggered doxorubicin release

Formulation and optimization of surfactant-modified chitosan nanoparticles loaded with cefdinir for novel topical drug delivery: Elevating wound healing efficacy with enhanced antibacterial properties

Burn wounds remain a significant global health concern, frequently exacerbated by bacterial infections that hinder healing and raise morbidity rates. Cefdinir, a third-generation cephalosporin antibiotic, is used to treat various conditions, but it has limitations such as low water solubility, limited bioavailability, and a short biological half-life. This study aimed to fabricate and optimize novel surfactant-based Cefdinir-loaded chitosan nanoparticles (CFD-CSNPs) for enhancing topical CFD delivery and efficacy in burn healing. Box-Behnken Design (BBD) was employed to develop optimized CFD-CSNPs using Design Expert® software, where the independent factors were chitosan concentration, chitosan: sodium tripolyphosphate ratio, pH, and surfactant type. Particle size PS, zeta potential ZP, Polydispersity index PDI, and entrapment efficiency EE% were evaluated as dependent factors. CFD-CSNPs were produced using the ionic gelation method. The optimized formula was determined and then examined for further in vitro and in vivo assessments. The optimized CFD-CSNPs exhibited acceptable PS, PDI, and ZP values. The EE% of CFD from CSNPs reached 57.89 % ± 1.66. TEM analysis revealed spherical morphology. In vitro release studies demonstrated a biphasic release profile up to (75.5 % ± 3.8) over 48 hrs. The optimized CFD-CSNPs showed improved antimicrobial efficacy against the tested microorganisms, exhibiting superior performance for both biofilm prevention and eradication. Enhanced wound healing activity was achieved by the optimized CFD-CSNPs in both in vitro and in vivo studies as confirmed by scratch wound assay and skin burn mice model. The current study advocates the efficacy of the innovative topical application of CFD-CSNPs for wound healing purposes and treatment of wound infections.

Stimuli-responsive chitosan based nanoparticles in cancer therapy and diagnosis: A review

Chitosan, obtained through deacetylation of chitin, has been shown to a promising biopolymer for the development of nano- and micro-particles. In spite of inherent anti-cancer activity of chitosan, the employment of this carbohydrate polymer for the synthesis of nanoparticles opens a new gate in disease therapy. The properties of chitosan including biocompatibility, biodegradability, and modifiability are vital in enhancing these nanoparticles, allowing for improved solubility and interaction with cellular targets. Among the pathological events, cancer has demonstrated an increase in incidence rate and therefore, the chitosan nanoparticles have been significantly utilized in cancer therapy. The present review emphasizes on the role of stimuli-responsive chitosan nanoparticles in the field of cancer therapy. The stimuli-responsive nanoparticles can release the cargo in the tumor site that not only improves the anti-cancer activity of chemotherapy drugs, but also diminishes their systemic toxicity. The stimuli-responsive chitosan nanoparticles can respond to endogenous and exogenous stimuli including pH, redox and light to release cargo. This improves the specificity towards tumor cells and enhances accumulation of drugs and/or drugs. The light-responsive chitosan nanoparticles can cause photothermal and photodynamic therapy in tumor ablation and provide theranostic feature that is cancer diagnosis and therapy simultaneously.

Chitosan Nanoparticles for Targeted Cancer Therapy: A Review of Stimuli-Responsive, Passive, and Active Targeting Strategies

Despite all major advancements in drug discovery and development in the pharmaceutical industry, cancer is still one of the most arduous challenges for the scientific community. The implications of nanotechnology have certainly resolved major issues related to conventional anticancer modalities; however, the undesired recognition of nanoparticles (NPs) by the mononuclear phagocyte system (MPS), their poor stability in biological fluids, premature release of payload, and low biocompatibility have restricted their clinical translation. In recent decades, chitosan (CS)-based nanodelivery systems (eg, polymeric NPs, micelles, liposomes, dendrimers, conjugates, solid lipid nanoparticles, etc.) have attained promising recognition from researchers for improving the pharmacokinetics and pharmacodynamics of chemotherapeutics. However, the specialty of this review is to mainly focus on and critically discuss the targeting potential of various CS-based NPs for treatment of different types of cancer. Based on their delivery mechanisms, we classified CS-based NPs into stimuli-responsive, passive, or active targeting nanosystems. Moreover, various functionalization strategies (eg, grafting with polyethylene glycol (PEG), hydrophobic substitution, tethering of stimuli-responsive linkers, and conjugation of targeting ligands) adapted to the architecture of CS-NPs for target-specific delivery of chemotherapeutics have also been considered. Nevertheless, CS-NPs based therapeutics hold great promise for improving therapeutic outcomes while mitigating the off-target effects of chemotherapeutics, a long-term safety profile and clinical testing in humans are warranted for their successful clinical translation.

Amelioration of Cancer Employing Chitosan, Its Derivatives, and Chitosan-Based Nanoparticles: Recent Updates

The limitations associated with the conventional treatment of cancer have necessitated the design and development of novel drug delivery systems based mainly on nanotechnology. These novel drug delivery systems include various kinds of nanoparticles, such as polymeric nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, hydrogels, and polymeric micelles. Among the various kinds of novel drug delivery systems, chitosan-based nanoparticles have attracted the attention of researchers to treat cancer. Chitosan is a polycationic polymer generated from chitin with various characteristics such as biocompatibility, biodegradability, non-toxicity, and mucoadhesiveness, making it an ideal polymer to fabricate drug delivery systems. However, chitosan is poorly soluble in water and soluble in acidic aqueous solutions. Furthermore, owing to the presence of reactive amino groups, chitosan can be chemically modified to improve its physiochemical properties. Chitosan and its modified derivatives can be employed to fabricate nanoparticles, which are used most frequently in the pharmaceutical sector due to their possession of various characteristics such as nanosize, appropriate pharmacokinetic and pharmacodynamic properties, non-immunogenicity, improved stability, and improved drug loading capacity. Furthermore, it is capable of delivering nucleic acids, chemotherapeutic medicines, and bioactives using modified chitosan. Chitosan and its modified derivative-based nanoparticles can be targeted to specific cancer sites via active and passive mechanisms. Based on chitosan drug delivery systems, many anticancer drugs now have better effectiveness, potency, cytotoxicity, or biocompatibility. The characteristics of chitosan and its chemically tailored derivatives, as well as their use in cancer therapy, will be examined in this review.

Pluronic® triblock copolymer-based nanoformulations for cancer therapy: A 10-year overview

This paper provides a review of the literature on the use of Pluronic® triblock copolymers for drug encapsulation over the last 10 years. A special focus is given to the progress of drug delivery systems (e.g., micelles, liposomes, micro/nanoemulsions, hydrogels and nanogels, and polymersomes and niosomes); the beneficial aspects of Pluronic® triblock copolymers as biological response modifiers and as pharmaceutical additives, adjuvants, and stabilizers, are also discussed. The advantages and limitations encountered in developing site-specific targeting approaches based on Pluronic-based nanostructures in cancer treatment are highlighted, in addition to innovative examples for improving tumor cytotoxicity while reducing side effects.

Statistical optimization of voriconazole nanoparticles loaded carboxymethyl chitosan-poloxamer based in situ gel for ocular delivery: In vitro, ex vivo, and toxicity assessment

The research study reflects the development of novel voriconazole (VCZ) loaded nanoparticles (NPs) for prolonged delivery for the management of ocular diseases. The in situ ophthalmic gel was prepared by incorporating NPs into carboxymethyl chitosan (CMCh) and poloxamer. The central composite design was used to optimize the process for the preparation of nanoparticles by the o/w solvent evaporation method. The developed nanoparticles were evaluated for the encapsulation efficiency (89.6 ± 1.2%), particle size (219.3 ± 1.8 nm), polydispersity index (PDI, 0.1), zeta potential (- 21.1 ± 1.12 mV), saturation solubility, DSC study, and drug release. The etherification process grafts carboxyl surface functional groups, on chitosan, and was confirmed by FTIR and NMR studies. The developed CMCh-poloxamer based gelling system was found to be clear and transparent with gelation temperature varying from 33 to 40 °C. The nanoparticle-loaded gel containing CMCh demonstrated enhanced antifungal activity against Candida albicans. The optimized batch containing CMCh showed improved mucoadhesion by 2.86-fold compared to VCZ nanosuspension. The drug release was prolonged up to 8 h with an ex vivo study suggesting the enhanced permeation across goat cornea estimated via fluorescent microscope. The hen's egg chorioallantoic membrane study revealed that the formulation was non-irritant and tolerated by the chorioallantoic membrane. The present study concludes that the VCZ loaded nanoparticulate in situ ophthalmic gel using CMCh may act as a potential alternative for traditional eye drops.

Fabrication of PEGylated Chitosan Nanoparticles Containing Tenofovir Alafenamide: Synthesis and Characterization

Tenofovir alafenamide (TAF) is an antiretroviral (ARV) drug that is used for the management and prevention of human immunodeficiency virus (HIV). The clinical availability of ARV delivery systems that provide long-lasting protection against HIV transmission is lacking. There is a dire need to formulate nanocarrier systems that can help in revolutionizing the way to fight against HIV/AIDS. Here, we aimed to synthesize a polymer using chitosan and polyethylene glycol (PEG) by the PEGylation of chitosan at the hydroxyl group. After successful modification and confirmation by FTIR, XRD, and SEM, TAF-loaded PEGylated chitosan nanoparticles were prepared and analyzed for their particle size, zeta potential, morphology, crystallinity, chemical interactions, entrapment efficacy, drug loading, in vitro drug release, and release kinetic modeling. The fabricated nanoparticles were found to be in a nanosized range (219.6 nm), with ~90% entrapment efficacy, ~14% drug loading, and a spherical uniform distribution. The FTIR analysis confirmed the successful synthesis of PEGylated chitosan and nanoparticles. The in vitro analysis showed ~60% of the drug was released from the PEGylated polymeric reservoir system within 48 h at pH 7.4. The drug release kinetics were depicted by the Korsmeyer-Peppas release model with thermodynamically nonspontaneous drug release. Conclusively, PEGylated chitosan has the potential to deliver TAF from a nanocarrier system, and in the future, cytotoxicity and in vivo studies can be performed to further authenticate the synthesized polymer.

Monoclonal Antibody Functionalized, and L-lysine α-Oxidase Loaded PEGylated-Chitosan Nanoparticle for HER2/Neu Targeted Breast Cancer Therapy

Simple Summary

Breast cancer is one of the dominant cancers that threaten human beings worldwide. Moreover, the treatment of HER2+ breast cancer is challenging due to heterogeneity. The L-lysine α-oxidase (LO) enzyme is a well-known antitumor enzyme, but its clinical utility has been limited due to side effects, decreased stability, and inability to target tumor cells. To overcome the clinical challenges in delivery of LO enzymes and improve HER2+ breast cancer therapeutics, the present study developed the dual stimuli responsive nanocarrier system (CS-LO-PEG-HER NPs) for pH sensitive and HER2/neu targeted breast cancer therapy.

Abstract

Herein, we designed a nanocarrier to deliver the LO specifically to HER2+ breast cancer (BC) cells, where functionalization of mAb (anti-HER2+) with PEGylated chitosan enabled it to target the HER2+ BC cells. Taking advantage of overexpression of HER2+ in cancer cells, our nanocarrier (CS-LO-PEG-HER NPs) exhibited promising potency and selectivity against HER2+ BC cells (BT474). The CS-LO-PEG-HER NPs demonstrated the cytotoxicity in BT474 cells by promoting reactive oxygen species, mitochondrial membrane potential loss, and nucleus damage. The biocompatibility of CS-LO-PEG-HER NPs was evidenced by the hemolysis assay and H & E staining of major organs. The CS-LO-PEG-HER NPs showed anticancer potency against the BT474-xenograft tumor-bearing mice, as evident by the reduction of tumor size and cell density. These results indicate that CS-LO-PEG-HER NPs are biocompatible with mice while inhibiting tumor growth through alter the oxidative stress. Overall, this work provides a promising approach for the delivery of LO for good therapeutic effect in combination with mAb.

Using Chitosan or Chitosan Derivatives in Cancer Therapy

Cancer is one of the major causes of death worldwide. Chemotherapeutic drugs have become a popular choice as anticancer agents. Despite the therapeutic benefits of chemotherapeutic drugs, patients often experience side effects and drug resistance. Biopolymers could be used to overcome some of the limitations of chemotherapeutic drugs, as well as be used either as anticancer agents or drug delivery vehicles. Chitosan is a biocompatible polymer derived from chitin. Chitosan, chitosan derivatives, or chitosan nanoparticles have shown their promise as an anticancer agent. Additionally, functionally modified chitosan can be used to deliver nucleic acids, chemotherapeutic drugs, and anticancer agents. More importantly, chitosan-based drug delivery systems improved the efficacy, potency, cytotoxicity, or biocompatibility of these anticancer agents. In this review, we will investigate the properties of chitosan and chemically tuned chitosan derivatives, and their application in cancer therapy.

A pH-sensitive nanocarrier based on BSA-stabilized graphene-chitosan nanocomposite for sustained and prolonged release of anticancer agents

Smart nanomaterials with stimuli-responsive behavior are considered as promising platform for various drug delivery applications. Regarding their specific conditions, such as acidic pH, drug carriers to treatment of tumor microenvironment need some criteria to enhance drug delivery efficiency. In this study, for the first time, pH-sensitive BSA-stabilized graphene (BSG)/chitosan nanocomposites were synthesized through electrostatic interactions between the positively charged chitosan nanoparticles and negatively charged BSG and used for Doxorubicin (DOX) encapsulation as a general anticancer drug. Physicochemical characterization of the nanocomposites with different concentrations of BSG (0.5, 2, and 5wt%) showed effective decoration of chitosan nanoparticles on BSG. Comparing DOX release behavior from the nanocomposites and free BSG-chitosan nanoparticles were evaluated at two pHs of 7.4 and 4.5 in 28 days. It was shown that the presence of BSG significantly reduced the burst release observed in chitosan nanoparticles. The nanocomposite of 2wt% BSG was selected as the optimal nanocomposite with a release of 84% in 28 days and with the most uniform release in 24 h. Furthermore, the fitting of release data with four models including zero-order, first-order, Higuchi, and Korsmeyer-Peppas indicated that the addition of BSG changed the release mechanism of the drug, enabling uniform release for the optimal nanocomposite in first 24 h, compared to that for pure chitosan nanoparticles. This behavior was proved using metabolic activity assay of the SKBR-3 breast cancer cell spheroids exposed to DOX release supernatant at different time intervals. It was also demonstrated that DOX released from the nanocomposite had a significant effect on the suppression of cancer cell proliferation at acidic pH.

Non-Ionic Surfactants for Stabilization of Polymeric Nanoparticles for Biomedical Uses

Surfactants are essential in the manufacture of polymeric nanoparticles by emulsion formation methods and to preserve the stability of carriers in liquid media. The deposition of non-ionic surfactants at the interface allows a considerable reduction of the globule of the emulsion with high biocompatibility and the possibility of oscillating the final sizes in a wide nanometric range. Therefore, this review presents an analysis of the three principal non-ionic surfactants utilized in the manufacture of polymeric nanoparticles; polysorbates, poly(vinyl alcohol), and poloxamers. We included a section on general properties and uses and a comprehensive compilation of formulations with each principal non-ionic surfactant. Then, we highlight a section on the interaction of non-ionic surfactants with biological barriers to emphasize that the function of surfactants is not limited to stabilizing the dispersion of nanoparticles and has a broad impact on pharmacokinetics. Finally, the last section corresponds to a recommendation in the experimental approach for choosing a surfactant applying the systematic methodology of Quality by Design.

Multifunctional PLGA nanoparticles combining transferrin-targetability and pH-stimuli sensitivity enhanced doxorubicin intracellular delivery and in vitro antineoplastic activity in MDR tumor cells

Targeted delivery aims to enhance cellular uptake and improve therapeutic outcome with higher disease specificity. The expression of transferrin receptor (TfR) is upregulated on tumor cells, which make the protein Tf and its receptor vastly relevant when applied to targeting strategies. Here, we proposed Tf-decorated pH-sensitive PLGA nanoparticles containing the chemosensitizer poloxamer as a carrier for doxorubicin delivery to tumor cells (Tf-DOX-PLGA-NPs), aiming at alleviating multidrug resistance (MDR). We performed a range of in vitro studies to assess whether targeted NPs have the ability to improve DOX antitumor potential on resistant NCI/ADR-RES cells. All evaluations of the Tf-decorated NPs were performed comparatively to the nontargeted counterparts, aiming to evidence the real role of NP surface functionalization, along with the benefits of pH-sensitivity and poloxamer, in the improvement of antiproliferative activity and reversal of MDR. Tf-DOX-PLGA-NPs induced higher number of apoptotic events and ROS generation, along with cell cycle arrest. Moreover, they were efficiently internalized by NCI/ADR-RES cells, increasing DOX intracellular accumulation, which supports the greater cell killing ability of these targeted NPs with respect to MDR cells. Altogether, these findings supported the effectiveness of the Tf-surface modification of DOX-PLGA-NPs for an improved antiproliferative activity. Therefore, our pH-responsive Tf-inspired NPs are a promising smart drug delivery system to overcome MDR effect at some extent, enhancing the efficacy of DOX antitumor therapy.

Chitosan and chitosan/PEG nanoparticles loaded with indole-3-carbinol: Characterization, computational study and potential effect on human bladder cancer cells

Indole-3-carbinol (I3C) is a plant molecule known to be active against several types of cancer, but some chemical characteristics limit its clinical applications. In order to overcome these limitations, polymeric nanoparticles can be used as carrier systems for targeted delivery of I3C. In this study, chitosan and chitosan/polyethylene glycol nanoparticles (CS NP and CS/PEG NP, respectively) were prepared to encapsulate I3C by ionic gelation method. The polymeric nanoparticles were characterized by Dynamic Scattering Light (DLS), Zeta Potential (ZP), Fourier Transform Infrared (FTIR) spetroscopy, X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and Field Emission Gun Scanning Electron Microscopy (FEG-SEM). I3C release testing was performed at an acidic media and the interactions between I3C and chitosan or PEG were evaluated by Density Functional Theory (DFT). Cytotoxicity of nanoparticles in bladder cancer T24 cell line was evaluated by the Methyl-thiazolyl-tetrazolium (MTT) colorimetric assay. The average size of the nanoparticles was observed to be in the range from 133.3 ± 3.7 nm to 180.4 ± 2.7 nm with a relatively homogeneous distribution. Samples had relatively high positive zeta potential values (between +20.3 ± 0.5 mV and + 24.3 ± 0.5 mV). Similar encapsulation efficiencies (about 80%) for both nanoparticles were obtained. Physicochemical and thermal characterizations pointed to the encapsulation of I3c. electron microscopy showed spherical particles with smooth or ragged surface characteristics, depending on the presence of PEG. The mathematical fitting of the release profile demonstrated that I3C-CS NP followed the Higuchi model whereas I3C-CS/PEG NP the Korsmeyer-Peppas model. Chemical differences between the nanoparticles as based on the I3C/CS or I3C/PEG interactions were demonstrate by computational characterization. The assessment of cell viability by the MTT test showed that the presence of both free I3C and I3C-loaded nanoparticles lead to statistically significant reduction in T24 cells viability in the concentrations from 500 to 2000 μM, when comparison to the control group after 24 h of exposure. Thus, CS and CS/PEG nanoparticles present as feasible I3C carrier systems for cancer therapy.

Poloxamer Modified Chitosan Nanoparticles for Vaginal Delivery of Acyclovir

OBJECTIVE

The aim of the present study was to design a surface modified chitosan nanoparticle system for vaginal delivery of acyclovir for effective drug uptake into vaginal mucosa.

METHODS

Acyclovir-loaded chitosan nanoparticles, with and without modification by poloxamer 407, were prepared by ionic gelation method. The effects of two independent variables, chitosan to sodium tripolyphosphate mass ratio (X1) and acyclovir concentration (X2), on drug entrapment in nanoparticles were studied using 32 full factorial design. The surface response and counterplots were drawn to facilitate an understanding of the contribution of the variables and their interaction. The nanoparticles were evaluated for drug entrapment, size with zeta potential, morphological analysis by TEM, solid-state characterization by FTIR, DSC, XRD, in vitro dissolution, in vitro cell uptake using HeLa cell line and in vivo vaginal irritation test in Wistar rats.

RESULTS

Chitosan nanoparticle formulation with chitosan to sodium tripolyphosphate mass ratio of 2:1 and acyclovir concentration of 2 mg/mL resulted in the highest entrapment efficiency. The resulting nanoparticles revealed spherical morphology with a particle size of 191.2 nm. The surface modification of nanoparticles with poloxamer resulted in higher drug entrapment (74.3±1.5%), higher particle size (391.1 nm) as a result of dense surface coating, lower zeta potential and sustained drug release compared to unmodified nanoparticles. The change in the crystallinity of the drug during nanoparticle formulation was observed in DSC and XRD study. Cellular uptake of poloxamer-modified chitosan nanoparticles was found to be higher than chitosan nanoparticles in HeLa cells. Safety of nanoparticle formulations by vaginal route was evident when tested in female rats.

CONCLUSION

Conclusively, poloxamer-modified CH NP could serve as a promising and safe delivery system with enhanced cellular drug uptake.

RGD functionalized chitosan nanoparticle mediated targeted delivery of raloxifene selectively suppresses angiogenesis and tumor growth in breast cancer

Acidic pH is a crucial intrinsic property of the microenvironment of most solid tumors. Hence, the use of pH sensitive tumor targeting nanoparticles is an attractive approach to enhance the therapeutic efficacy of anti-cancer agents in solid tumors. Chitosan nanoparticles (CHNPs) have been widely explored in the area of cancer drug delivery; nevertheless their true potential as a pH responsive targeted drug delivery vehicle in cancer therapy has not been deciphered yet as most of the research is limited to pH dependent stability and drug release. In the present study, we investigate the direct effect of pH in synergy with RGD peptide based targeting on the therapeutic efficacy of chitosan nanoparticles (RGD-CHNPs) in breast cancer. Furthermore, for the first time we performed a comprehensive study showing the anti-tumor, anti-migratory and anti-angiogenic effect of raloxifene (Rlx) loaded CHNPs in breast cancer. We prepared stable formulations of raloxifene encapsulated CHNPs and RGD-CHNPs by the nontoxic ionic gelation method. pH dependent studies revealed that NPs possess higher stability and zeta potential along with enhanced cellular uptake at acidic pH (as present in solid tumors) compared to physiological pH. Furthermore, RGD conjugation enhanced the in vitro cellular uptake of CHNPs in α_vβ₃ integrin expressing breast cancer cells and induced higher cellular apoptosis in breast cancer cells which was further augmented by lower pH. Moreover, Rlx-RGD-CHNPs significantly inhibited breast cancer cell migration and angiogenesis. In vivo studies showed that Cy5.5 conjugated RGD-CHNPs can distinctly visualize tumors and Rlx-RGD-CHNPs significantly inhibit breast tumor growth without causing any toxic effect to normal tissue as confirmed by hematology and blood biochemical studies. Therefore, RGD-CHNPs could potentially enhance the therapeutic efficacy of chemotherapeutic drugs due to the synergistic effect of pH responsiveness and tumor specific targeting in breast cancer.

Characterization of chitosan-lysine surfactant bioactive coating on silicone substrate

Chitosan (Chi) and anionic surfactant derived from lysine (77KS) were used to prepare a novel bioactive coating and as a drug delivery system for amoxicillin (AMOX) on a model polydimethylsiloxane (PDMS) surface. The bioactive coating was formulated as polyelectrolyte-surfactant complex (PESC). Aggregation behaviour between the cationic Chi and oppositely charged 77KS in bulk was analysed using turbidity and ζ-potential measurement. Furthermore, the adsorption and stability of the formulations were evaluated using quartz crystal microbalance with dissipation (QCM-D). The effect of the ionic strength and of the ultraviolet/ozone (UVO) activation of the PDMS films on the adsorption behaviour of the PESC complex was also examined. QCM-D monitoring showed stable adsorption of bare and AMOX-loaded complex on non-activated PDMS films, while the coating on UVO-activated PDMS samples desorbed after the rinsing step. Finally, X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed successful and homogenously distributed compounds.

Increased ROS Scavenging and Antioxidant Efficiency of Chlorogenic Acid Compound Delivered via a Chitosan Nanoparticulate System for Efficient In Vitro Visualization and Accumulation in Human Renal Adenocarcinoma Cells

Naturally existing Chlorogenic acid (CGA) is an antioxidant-rich compound reported to act a chemopreventive agent by scavenging free radicals and suppressing cancer-causing mechanisms. Conversely, the compound’s poor thermal and pH (neutral and basic) stability, poor solubility, and low cellular permeability have been a huge hindrance for it to exhibit its efficacy as a nutraceutical compound. Supposedly, encapsulation of CGA in chitosan nanoparticles (CNP), nano-sized colloidal delivery vector, could possibly assist in enhancing its antioxidant properties, in vitro cellular accumulation, and increase chemopreventive efficacy at a lower concentration. Hence, in this study, a stable, monodispersed, non-toxic CNP synthesized via ionic gelation method at an optimum parameter (600 µL of 0.5 mg/mL of chitosan and 200 µL of 0.7 mg/mL of tripolyphosphate), denoted as CNP°, was used to encapsulate CGA. Sequence of physicochemical analyses and morphological studies were performed to discern the successful formation of the CNP°-CGA hybrid. Antioxidant property (studied via DPPH (1,1-diphenyl-2-picrylhydrazyl) assay), in vitro antiproliferative activity of CNP°-CGA, and in vitro accumulation of fluorescently labeled (FITC) CNP°-CGA in cancer cells were evaluated. Findings revealed that successful formation of CNP°-CGA hybrid was reveled through an increase in particle size 134.44 ± 18.29 nm (polydispersity index (PDI) 0.29 ± 0.03) as compared to empty CNP°, 80.89 ± 5.16 nm (PDI 0.26 ± 0.01) with a maximal of 12.04 μM CGA loaded per unit weight of CNP° using 20 µM of CGA. This result correlated with Fourier-Transform Infrared (FTIR) spectroscopic analysis, transmission Electron Microscopy (TEM) and field emission scanning (FESEM) electron microscopy, and ImageJ evaluation. The scavenging activity of CNP°-CGA (IC₅₀ 5.2 ± 0.10 µM) were conserved and slightly higher than CNP° (IC₅₀ 6.4±0.78 µM). An enhanced cellular accumulation of fluorescently labeled CNP°-CGA in the human renal cancer cells (786-O) as early as 30 min and increased time-dependently were observed through fluorescent microscopic visualization and flow cytometric assessment. A significant concentration-dependent antiproliferation activity of encapsulated CGA was achieved at IC₅₀ of 16.20 µM as compared to CGA itself (unable to determine from the cell proliferative assay), implying that the competent delivery vector, chitosan nanoparticle, is able to enhance the intracellular accumulation, antiproliferative activity, and antioxidant properties of CGA at lower concentration as compared to CGA alone.

In Vitro Release Test of Nano-drug Delivery Systems Based on Analytical and Technological Perspectives

Background:

Nanotech products are gaining more attention depending on their advantages for improving drug solubility, maintenance of drug targeting, and attenuation of drug toxicity. In vitro release test is the critical physical parameter to determine the pharmaceutical quality of the product, to monitor formulation design and batch-to-batch variation.

Methods:

Spectrophotometric and chromatographic methods are mostly used in quantification studies from in vitro release test of nano-drug delivery systems. These techniques have advantages and disadvantages with respect to each other considering dynamic range, selectivity, automation, compatibility with in vitro release media and cost per sample.

Results:

It is very important to determine the correct kinetic profile of active pharmaceutical substances. At this point, the analytical method used for in vitro release tests has become a very critical parameter to correctly assess the profiles. In this review, we provided an overview of analytical methods applied to the in vitro release assay of various nanopharmaceuticals.

Conclusion:

This review presents practical direction on analytical method selection for in vitro release test on nanopharmaceuticals. Moreover, precautions on analytical method selection, optimization and validation were discussed.

Poly (ɛ-Caprolactone) Nanoparticles with pH-Responsive Behavior Improved the In Vitro Antitumor Activity of Methotrexate

A promising approach to achieve a more efficient antitumor therapy is the conjugation of the active molecule to a nanostructured delivery system. Therefore, the main objective of this research was to prepare nanoparticles (NPs), with the polymer poly (ε-caprolactone) (PCL), as a carrier for the antitumor drug methotrexate (MTX). A pH-responsive behavior was obtained through conjugation of the amino acid-based amphiphile, 77KL, to the NP matrix. The NPs showed mean hydrodynamic diameter and drug entrapment efficiency of 178.5 nm and 20.52%, respectively. Owing to its pH-sensitivity, the PCL-NPs showed membrane-lytic behavior upon reducing the pH value of surrounding media to 5.4, which is characteristic of the endosomal compartments. The in vitro antitumor assays demonstrated that MTX-loaded PCL-NPs have higher antiproliferative activity than free drug in MCF-7 cells and, to a lesser extent, in HepG2 cells. This same behavior was also achieved at mildly acidic conditions, characteristic of the tumor microenvironment. Altogether, the results evidenced the pH-responsive properties of the designed NPs, as well as the higher in vitro cytotoxicity compared to free MTX, representing thus a promising alternative for the antitumor therapy.

Natural biodegradable polymers based nano-formulations for drug delivery: A review

Nanomedicines are now considered as the new-generation medication in the current era mainly because of their features related to nano size. The efficacy of many drugs in their micro/macro formulations is shown to have poor bioavailability and pharmacokinetics after oral administration. To overcome this predicament, use of natural/synthetic biodegradable polymeric nanoparticles (NPs) have gained prominence in the field of nanomedicine for targeted drug delivery to improve biocompatibility, bioavailability, safety, enhanced permeability, better retention time and lower toxicity. For drug delivery, it is essential to have biodegradable nanoparticle formulations for safe and efficient transport and release of drug at the intended site. Moreover, depending on the target organ, a suitable biodegradable polymer can be selected as the drug-carrier for target specific as well as for sustained drug delivery. The aim of this review is to present the current status and scope of natural biodegradable polymers as well as some emerging polymers with special characteristics as suitable carriers for drug delivery applications. The most widely preferred preparation methods are discussed along with their characterization using different analytical techniques. Further, the review highlights significant features of methods developed using natural polymers for drug entrapment and release studies.

A Micelle Self-Assembled from Doxorubicin-Arabinoxylan Conjugates with pH-Cleavable Bond for Synergistic Antitumor Therapy

Nanomedicine offers new hope to overcome the low solubility and high side toxicity to normal tissue appeared in traditional chemotherapy. The biocompatibility and intracellular drug accumulation is still a big challenge for the nano-based formulations. Herein, a medical-used biocompatible arabinoxylan (AX) is used to develop to delivery chemodrug doxorubicin (DOX). The solubility of DOX is obviously enhanced via the hydrogen bond formed with AX which results in an amphiphilic AX-DOX. A micelle with pH-cleavable bond is thus self-assembled from such AX-DOX with DOX core and AX shell. The inner DOX can be easily released out at low intracellular pH, which obviously enhanced its in vitro cytotoxicity against breast cancer cells (MCF-7). Interestingly, an unexpected apoptosis is evoked except for the proliferation inhibition. Moreover, the therapeutic effects are further synergistically promoted by the enhanced permeability and retention (EPR) and intracellular pH-triggered drug release. Consequently, the in vivo intratumor accumulation of DOX, the tumor inhibition was significantly promoted after intravenous administration to the Balb/c nude mice bearing MCF-7 tumors. These in vitro/vivo results indicated that the AX-DOX micellular formulation holds high potential in cancer therapy.

Manipulation of pH-Sensitive interactions between podophyllotoxin-chitosan for enhanced controlled drug release

Podophyllotoxin (PPT) offers a broad-spectrum of anticancer activities, but little has been reported for its controlled release. This work shows that by manipulating molecular interactions between PPT and Chitosan, efficient nanoscale capsulation of PPT can be realized. The drug encapsulation efficiency is as high as 52%, with a final particle drug loading in the order of 10% (wt/wt). It further demonstrates that changes in pH can also significantly affect the rate of drug release from the Chitosan nanoparticles. Upon contact with cancer cells, chitosan nanoparticles enable efficient internalization and drug release. In vitro evaluations with HepG-2 and MCF-7 cells indicate that the chitosan nanoparticle carriers can improve drug efficacy in comparison to free PPT, most likely by regulating the intrinsic apoptotic signaling pathway to induce apoptosis. Overall, PPT chitosan nanoparticles promise a safe and efficient drug delivery system for PPT.