Codelivery of doxorubicin-containing thermosensitive hydrogels incorporated with docetaxel-loaded mixed micelles enhances local cancer therapy

Mixed-Micelle in Situ Gel as a Candidate for Oral Inflammatory Ulcerative Diseases

The current treatment for oral inflammatory ulcerative diseases has limitations. In situ forming hydrogels have shown great potential to deliver therapeutic substances for drug delivery to the buccal cavity. This study aimed to prepare and characterize lipid- and surfactant-based mixed micelle in situ gel (MIG) and evaluate whether it can offer more favorable properties than the in situ gel for effective treatment of the disease. Dexamethasone was incorporated into the MIGs particles, based on Poloxamer 407 and chitosan. The lower gelation time at 37 ℃ was considered a criterion to select superior formulations among the different lipid- and surfactant-based candidates. Further characterization was performed to evaluate the opted formulations regarding morphology, physical stability, rheology, texture, and release profile. All formulations were thermoresponsive and had a shorter gelation time as the temperature increased. Dexamethasone was released in a highly controlled manner, and morphological evaluation revealed that the mixed micelle in situ gels had spherical nanoparticles. Thixotropic behavior was observed in all MIGs, indicating a prolonged retention time of the formulation after oral administration. This study has shown that among different MIGs, the one with oleic acid is a more promising candidate than the in situ gel and other MIGs for drug delivery to the buccal cavity.

Injectable Poloxamer Hydrogels for Local Cancer Therapy

The widespread push to invest in local cancer therapies comes from the need to overcome the limitations of systemic treatment options. In contrast to intravenous administration, local treatments using intratumoral or peritumoral injections are independent of tumor vasculature and allow high concentrations of therapeutic agents to reach the tumor site with minimal systemic toxicity. Injectable biodegradable hydrogels offer a clear advantage over other delivery systems because the former requires no surgical procedures and promotes drug retention at the tumor site. More precisely, in situ gelling systems based on poloxamers have garnered considerable attention due to their thermoresponsive behavior, biocompatibility, ease of preparation, and possible incorporation of different anticancer agents. Therefore, this review focuses on the use of injectable thermoresponsive hydrogels based on poloxamers and their physicochemical and biological characterization. It also includes a summary of these hydrogel applications in local cancer therapies using chemotherapy, phototherapy, immunotherapy, and gene therapy.

Injectable Thermoresponsive Hydrogels for Cancer Therapy: Challenges and Prospects

The enervating side effects of chemotherapeutic drugs have necessitated the use of targeted drug delivery in cancer therapy. To that end, thermoresponsive hydrogels have been employed to improve the accumulation and maintenance of drug release at the tumour site. Despite their efficiency, very few thermoresponsive hydrogel-based drugs have undergone clinical trials, and even fewer have received FDA approval for cancer treatment. This review discusses the challenges of designing thermoresponsive hydrogels for cancer treatment and offers suggestions for these challenges as available in the literature. Furthermore, the argument for drug accumulation is challenged by the revelation of structural and functional barriers in tumours that may not support targeted drug release from hydrogels. Other highlights involve the demanding preparation process of thermoresponsive hydrogels, which often involves poor drug loading and difficulties in controlling the lower critical solution temperature and gelation kinetics. Additionally, the shortcomings in the administration process of thermosensitive hydrogels are examined, and special insight into the injectable thermosensitive hydrogels that reached clinical trials for cancer treatment is provided.

Pluronic® triblock copolymer-based nanoformulations for cancer therapy: A 10-year overview

This paper provides a review of the literature on the use of Pluronic® triblock copolymers for drug encapsulation over the last 10 years. A special focus is given to the progress of drug delivery systems (e.g., micelles, liposomes, micro/nanoemulsions, hydrogels and nanogels, and polymersomes and niosomes); the beneficial aspects of Pluronic® triblock copolymers as biological response modifiers and as pharmaceutical additives, adjuvants, and stabilizers, are also discussed. The advantages and limitations encountered in developing site-specific targeting approaches based on Pluronic-based nanostructures in cancer treatment are highlighted, in addition to innovative examples for improving tumor cytotoxicity while reducing side effects.

Next-Generation 3D Scaffolds for Nano-Based Chemotherapeutics Delivery and Cancer Treatment

Cancer is the leading cause of death after cardiovascular disease. Despite significant advances in cancer research over the past few decades, it is almost impossible to cure end-stage cancer patients and bring them to remission. Adverse effects of chemotherapy are mainly caused by the accumulation of chemotherapeutic agents in normal tissues, and drug resistance hinders the potential therapeutic effects and curing of this disease. New drug formulations need to be developed to overcome these problems and increase the therapeutic index of chemotherapeutics. As a chemotherapeutic delivery platform, three-dimensional (3D) scaffolds are an up-and-coming option because they can respond to biological factors, modify their properties accordingly, and promote site-specific chemotherapeutic deliveries in a sustainable and controlled release manner. This review paper focuses on the features and applications of the variety of 3D scaffold-based nano-delivery systems that could be used to improve local cancer therapy by selectively delivering chemotherapeutics to the target sites in future.

Emerging nanotechnology-based therapeutics to combat multidrug-resistant cancer

Cancer often develops multidrug resistance (MDR) when cancer cells become resistant to numerous structurally and functionally different chemotherapeutic agents. MDR is considered one of the principal reasons for the failure of many forms of clinical chemotherapy. Several factors are involved in the development of MDR including increased expression of efflux transporters, the tumor microenvironment, changes in molecular targets and the activity of cancer stem cells. Recently, researchers have designed and developed a number of small molecule inhibitors and derivatives of natural compounds to overcome various mechanisms of clinical MDR. Unfortunately, most of the chemosensitizing approaches have failed in clinical trials due to non-specific interactions and adverse side effects at pharmacologically effective concentrations. Nanomedicine approaches provide an efficient drug delivery platform to overcome the limitations of conventional chemotherapy and improve therapeutic effectiveness. Multifunctional nanomaterials have been found to facilitate drug delivery by improving bioavailability and pharmacokinetics, enhancing the therapeutic efficacy of chemotherapeutic drugs to overcome MDR. In this review article, we discuss the major factors contributing to MDR and the limitations of existing chemotherapy- and nanocarrier-based drug delivery systems to overcome clinical MDR mechanisms. We critically review recent nanotechnology-based approaches to combat tumor heterogeneity, drug efflux mechanisms, DNA repair and apoptotic machineries to overcome clinical MDR. Recent successful therapies of this nature include liposomal nanoformulations, cRGDY-PEG-Cy5.5-Carbon dots and Cds/ZnS core–shell quantum dots that have been employed for the effective treatment of various cancer sub-types including small cell lung, head and neck and breast cancers.

Poly (N-Vinylcaprolactam-Grafted-Sodium Alginate) Based Injectable pH/Thermo Responsive In Situ Forming Depot Hydrogels for Prolonged Controlled Anticancer Drug Delivery; In Vitro, In Vivo Characterization and Toxicity Evaluation

This study was aimed to develop novel in situ forming gels based on N-vinylcaprolactam, sodium alginate, and N,N-methylenebisacrylamide. The in situ Poly (NVRCL-g-NaAlg) gels were developed using the cold and free radical polymerization method. The structure formation, thermal stability, and porous nature of gels was confirmed by FTIR, NMR, DSC, TGA, and SEM. The tunable gelation temperature was evaluated by tube titling and rheological analysis. Optical transmittance showed that all formulations demonstrated phase transition around 33 °C. The swelling and release profile showed that gels offered maximum swelling and controlled 5-FU release at 25 °C and pH (7.4), owing to a relaxed state. Porosity and mesh size showed an effect on swelling and drug release. The in vitro degradation profile demonstrated a controlled degradation rate. An MTT assay confirmed that formulations are safe tested against Vero cells. In vitro cytotoxicity showed that 5-FU loaded gels have controlled cytotoxic potential against HeLa and MCF-7 cells (IC50 = 39.91 µg/mL and 46.82 µg/mL) compared to free 5-FU (IC50 = 50.52 µg/mL and 53.58 µg/mL). Histopathological study demonstrated no harmful effects of gels on major organs. The in vivo bioavailability in rabbits showed a controlled release in gel form (Cmax, 1433.59 ± 45.09 ng/mL) compared to a free drug (Cmax, 2263.31 ± 13.36 ng/mL) after the subcutaneous injection.

Preparation and characterization of a hydroxypropyl methylcellulose based wafer for simultaneous delivery of phenytoin and insulin as wound dressing material

In this study, a novel wafer based on Hydroxypropyl methylcellulose (HPMC) was prepared as a wound dressing for the simultaneous delivery of phenytoin (PT) and insulin; evaluation of the cutaneous wound repair property was performed too. Due to its low water solubility, PT was encapsulated in polymeric micelles (PM) by the film hydration method at different polymer/drug ratios and characterized in terms of particle size (PS), polydispersity index (PdI), zeta potential (ZP), drug loading (DL) %, entrapment efficiency (EE) %, and drug release. Then, the optimized PT loaded PM (PT-PM) was embedded in the wafers prepared from the HPMC polymer, alone or in combination with Carbopol 940 (CB) and xanthan gum (XG). This wafer also contained a fixed amount of insulin (PT-PM-Insulin-wafer). The obtained wafers were evaluated in terms of morphology, water uptake ability, porosity, bioadhesion and hardness features. Finally, the efficacy of the PT-PM-Insulin-wafer was assessed in full-thickness excision wound models. The optimized PT-PM showed the PS of 84.05 ± 1.80 nm, PdI of 0.28 ± 0.22, ZP of -3.38 ± 0.26 mV, DL of 15.63 ± 0.01%, EE of 92.66 ± 0.08%, and the release efficiency of 59.95 ± 0.03%. The results obtained from the XRD studies of PT-PM also demonstrated the transition of the crystalline nature of the PT to the amorphous form, while FTIR studies showed some intermolecular interaction of PT and the Soluplus® copolymer chain. It was also found that the incorporation of XG into HPMC wafers influenced the microstructure, thus increasing the porosity, water uptake ability and bioadhesion. Compared with other groups, the PT-PM-Insulin-wafer group showed the enhancement of wound closure through increasing collagen deposition and re-epithelialization. The present study, therefore, revealed that the PT-PM-Insulin-wafer group might have very promising applications for wound healing.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

A novel anti-tumor/anti-tumor-associated fibroblast/anti-mPEG tri-specific antibody to maximize the efficacy of mPEGylated nanomedicines against fibroblast-rich solid tumor

The therapeutic efficacy of methoxypolyethylene glycol (mPEG)-coated nanomedicines in solid tumor treatment is hindered by tumor-associated fibroblasts (TAFs), which promote tumor progression and form physical barriers. We developed an anti-HER2/anti-FAP/anti-mPEG tri-specific antibody (TsAb) for one-step conversion of mPEG-coated liposomal doxorubicin (Lipo-Dox) to immunoliposomes, which simultaneously target HER2⁺ breast cancer cells and FAP⁺ TAFs. The non-covalent modification did not adversely alter the physical characteristics and stability of Lipo-Dox. The TsAb-Lipo-Dox exhibited specific targeting and enhanced cytotoxicity against mono- and co-cultured HER2⁺ breast cancer cells and FAP⁺ TAFs, compared to bi-specific antibody (BsAb) modified or unmodified Lipo-Dox. An in vivo model of human breast tumor containing TAFs also revealed the improved tumor accumulation and therapeutic efficacy of TsAb-modified mPEGylated liposomes without signs of toxicity. Our data indicate that arming clinical mPEGylated nanomedicines with the TsAb is a feasible and applicable approach for overcoming the difficulties caused by TAFs in solid tumor treatment.

Co-delivery systems: hope for clinical application?

Cancer is a multidimensional and challenging disease to handle. Current statistics reveal that we are far from satisfying cancer treatment. Taking advantage of different therapeutic agents that affect multiple pathways has been established as highly productive. Nevertheless, owing to several hindrances to conventional combination therapy, such as lack of tumor targeting, non-uniform pharmacokinetic of the combined drugs, and off-target side effects, it is well documented that this treatment approach is unlikely to address all the difficulties observed in monotherapy. Co-delivery systems could enhance the therapeutic efficacy of the combination therapy by targeting cancer cells and improving the pharmacokinetic and physicochemical properties of the therapeutic agents. Nevertheless, it seems that present knowledge in responding to the challenges in cancer treatment is still inadequate and far from optimal treatment, which highlights the urgent need for systematic studies direct to identify various aspects of co-delivery systems. Accordingly, to gather informative data, save time, and achieve superior results, the following steps are necessary: (1) implementing computational methods to predict drug-drug interactions (DDIs) in vitro and in vivo, (2) meticulous cancer studies at the cellular and molecular levels to obtain specific criteria for selecting preclinical and clinical models, (3) extensive physiological and pharmacokinetic study of nanocarriers behavior in preclinical models, and (4) finding the optimal formulation and analyzing its behavior in cellular and animal models facilitates bridging in vivo models to clinical trials. This review aims to deliver an overview of co-delivery systems, rationales, and suggestions for further studies in this field.

Thermo-responsive hydrogels for cancer local therapy: Challenges and state-of-art

Despite the enormous efforts done by the scientific community in the last decades, advanced cancer is still considered an incurable disease. New formulations are continuously under investigation to improve drugs therapeutic index, i.e., increase chemotherapeutic efficacy and reduce adverse effects. In this context, hydrogels-based systems for drug local sustained/controlled release have been proposed to reduce off-target effects caused by the repeated administration of systemic/oral anticancer drugs and improve their therapeutic effectiveness. Moreover, it increases the patient welfare by reducing the number of administrations needed. Among the several types of existing hydrogels, the thermo-responsive ones, which are able to change their physical state from liquid at 25 °C to a gel at the body temperature, i.e., 37 °C, gained special attention as in situ sustained drug release depot-systems in cancer treatment. To date, several thermo-responsive hydrogels have been used for drugs and/or genetic material delivery, yielding promising results both at preclinical and clinical evaluation stages. This culminates in the market authorization of Jelmyto® for the treatment of urothelial cancer. Here are summarized and discussed the last 10 years advances regarding the application of thermo-responsive hydrogels in local cancer treatment.

From Supramolecular Hydrogels to Multifunctional Carriers for Biologically Active Substances

Supramolecular hydrogels are 3D, elastic, water-swelled materials that are held together by reversible, non-covalent interactions, such as hydrogen bonds, hydrophobic, ionic, host-guest interactions, and metal-ligand coordination. These interactions determine the hydrogels' unique properties: mechanical strength; stretchability; injectability; ability to self-heal; shear-thinning; and sensitivity to stimuli, e.g., pH, temperature, the presence of ions, and other chemical substances. For this reason, supramolecular hydrogels have attracted considerable attention as carriers for active substance delivery systems. In this paper, we focused on the various types of non-covalent interactions. The hydrogen bonds, hydrophobic, ionic, coordination, and host-guest interactions between hydrogel components have been described. We also provided an overview of the recent studies on supramolecular hydrogel applications, such as cancer therapy, anti-inflammatory gels, antimicrobial activity, controlled gene drug delivery, and tissue engineering.

Electrohydrodynamic 3D Printing Scaffolds for Repair of Achilles Tendon Defect in Rats

Tissue engineering (TE) studies for Achilles tendon (AT) defects are a difficult and popular field in orthopedic medical practice. In this study, we applied electrohydrodynamic three-dimensional (3D) printing technology to construct scaffolds made of poly-(ɛ-ɛ-caprolactone) (PCL) and Pluronic F127 (F127) with different mass-volume ratios. The fibers and porous capabilities of the scaffolds were controlled using this technology. We found that F127 improved the hydrophilicity and degradation of PCL in vitro. The PCL scaffolds with 5% F127 were mostly favorable for cell adhesion and growth, suggesting that the scaffolds had good biocompatibility in vitro. Scaffolds with 5% F127 seeded with C3H10T1/2 cells were transplanted into AT defects in rats. A histological analysis indicated that the TE scaffolds were beneficial for the accumulation and arrangement of collagen fibers. Thus, this study provides fundamental experimental data for future clinical applications regarding TE for ATs.

Cancer Stem Cell Microenvironment Models with Biomaterial Scaffolds In Vitro

Defined by its potential for self-renewal, differentiation and tumorigenicity, cancer stem cells (CSCs) are considered responsible for drug resistance and relapse. To understand the behavior of CSC, the effects of the microenvironment in each tissue are a matter of great concerns for scientists in cancer biology. However, there are many complicated obstacles in the mimicking the microenvironment of CSCs even with current advanced technology. In this context, novel biomaterials have widely been assessed as in vitro platforms for their ability to mimic cancer microenvironment. These efforts should be successful to identify and characterize various CSCs specific in each type of cancer. Therefore, extracellular matrix scaffolds made of biomaterial will modulate the interactions and facilitate the investigation of CSC associated with biological phenomena simplifying the complexity of the microenvironment. In this review, we summarize latest advances in biomaterial scaffolds, which are exploited to mimic CSC microenvironment, and their chemical and biological requirements with discussion. The discussion includes the possible effects on both cells in tumors and microenvironment to propose what the critical factors are in controlling the CSC microenvironment focusing the future investigation. Our insights on their availability in drug screening will also follow the discussion.

Innovative coenzyme Q10-loaded nanoformulation as an adjunct approach for the management of moderate periodontitis: preparation, evaluation, and clinical study

Periodontal diseases are worldwide chronic inflammatory conditions that are associated with heavy production of reactive oxygen species followed by damage of the tooth-supporting tissues. Although the mechanical approach of scaling and root planing (SRP) for removing of plaque is considered as the key element for controlling periodontitis, the anatomical complexity of the teeth hinders accessibility to deeper points. The aim of this study was to design a micellar nanocarrier of coenzyme Q10 (Q₁₀) to support the management of moderate periodontitis. Q₁₀ was formulated in nanomicelles (NM_Q10) and evaluated regarding encapsulation efficiency, loading efficiency, percent yield, hydrodynamic size (D_h), polydispersity index (PDI), and zeta potential (ζ potential). NM_Q10 was incorporated to in situ gelling systems and the in vitro release of Q₁₀ was studied. A clinical study including evaluation of periodontal parameters and biochemical assay of total antioxidant capacity (T-AOC) and lipid peroxide was achieved. Results revealed that Q₁₀ was efficiently entrapped in spherical-shaped stable NM_Q10 with D_h, PDI, and ζ potential of 154.0 nm, 0.108, and - 31.67 mV, respectively. The clinical study revealed that SRP only exhibited improvement of the periodontal parameters. Also, assay of T-AOC and lipid peroxide revealed that their values diminished by 21.5 and 23.8%, respectively. On the other hand, SRP combined with local application of NM_Q10 resulted in a significant management of the periodontal parameters, and likewise, the assayed biomarkers proved enhanced antioxidant activity over SRP alone. In conclusion, NM_Q10 can be suggested as a promising nanosystem as an approach to support the management of chronic periodontitis. Such results could be used to conduct larger clinical studies. Graphical abstrac.

Advances of nanomaterial applications in oral and maxillofacial tissue regeneration and disease treatment

Using bioactive nanomaterials in clinical treatment has been widely aroused. Nanomaterials provide substantial improvements in the prevention and treatment of oral and maxillofacial diseases. This review aims to discuss new progresses in nanomaterials applied to oral and maxillofacial tissue regeneration and disease treatment, focusing on the use of nanomaterials in improving the quality of oral and maxillofacial healthcare, and discuss the perspectives of research in this arena. Details are provided on the tissue regeneration, wound healing, angiogenesis, remineralization, antitumor, and antibacterial regulation properties of nanomaterials including polymers, micelles, dendrimers, liposomes, nanocapsules, nanoparticles and nanostructured scaffolds, etc. Clinical applications of nanomaterials as nanocomposites, dental implants, mouthwashes, biomimetic dental materials, and factors that may interact with nanomaterials behaviors and bioactivities in oral cavity are addressed as well. In the last section, the clinical safety concerns of their usage as dental materials are updated, and the key knowledge gaps for future research with some recommendation are discussed. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

Synergistic Combination of Sodium Aescinate-Stabilized, Polymer-Free, Twin-Like Nanoparticles to Reverse Paclitaxel Resistance

BACKGROUND

The development of paclitaxel (PTX) resistance seriously restricts its clinical efficacy. An attractive option for combating resistance is inhibiting the expression of P-glycoprotein (P-gp) in tumor cells. We have reported that flavokawain A (FKA) inhibited P-gp protein expression in PTX-resistant A549 (A549/T) cells, indicating that FKA combined with PTX may reverse PTX resistance. However, due to the variable pharmacokinetics of FKA and PTX, the conventional cocktail combination in clinics may cause uncertainty of treatment efficacy in vivo.

MATERIALS AND METHODS

To synergistically elevate the anti-cancer activity of PTX and FKA in vivo, the national medical products administration (NMPA) approved sodium aescinate (Aes) was utilized to stabilize hydrophobic PTX and FKA to form polymer-free twin like PTX-A nanoparticles (NPs) and FKA-A NPs.

RESULTS

The resulting nanoparticles prepared simply by nanoprecipitation possessed similar particle size, good stability and ultrahigh drug loadings of up to 50%. With the aid of Aes, these two drugs accumulated in tumor tissue by passive targeting and were efficiently taken up by A549/T cells; this resulted in significant suppression of tumor growth in A549/T homograft mice at a low PTX dose (2.5 mg·kg-1). Synergistic effects and reversed PTX resistance were achieved by the combination of PTX-A NPs and FKA-A NPs by inhibiting P-gp expression in tumor cells.

CONCLUSION

Using NMPA-approved Aes to prepare twin-like nanoparticles without introducing any new materials provides an efficient platform for combination chemotherapy and clinical translation.

Recent Nanocarrier Approaches for Targeted Drug Delivery in Cancer Therapy

Cancer is one of the most serious health concerns in the 21st century whose prevalence is beyond boundaries and can affect any organ of the human body. The conventional chemotherapeutic treatment strategies lack specificity to tumors and are associated with toxic effects on the immune system and other organ systems. In the past decades, there has been continuous progress in the development of smart nanocarrier systems for target-specific delivery of drugs against a variety of tumors, including intracellular gene-specific targeting. These nanocarriers are able to recognize the tumor cells and deliver the therapeutic agent in fixed proportions, causing no or very less harm to healthy cells. Nanosystems have modified physicochemical properties, improved bioavailability, and long retention in blood, which enhances their potency. A huge number of nanocarrier based formulations have been developed and are in clinical trials. Nanocarrier systems include polymeric micelles, liposomes, dendrimers, carbon nanotubes, gold nanoparticles, etc. Recent advancements in nanocarrier systems include mesoporous silica nanoparticles (MSNs), metal organic frameworks, and quantum dots. In the present review, various nanocarrier based drug delivery systems, along with their applications in the management of cancer, have been described with special emphasis on MSNs.

Evaluation of the activity of a chemo-ablative, thermoresponsive hydrogel in a murine xenograft model of lung cancer

BACKGROUND

Minimally invasive intratumoural administration of thermoresponsive hydrogels, that transition from liquid to gel in response to temperature, has been proposed as a potential treatment modality for solid tumours. The aim of this study was to assess the inherent cytotoxicity of a poloxamer-based thermoresponsive hydrogel in a murine xenograft model of lung cancer.

METHODS

In vitro viability assessment was carried out in a lung cancer (A549) and non-cancerous (Balb/c 3T3 clone A31) cell line. Following intratumoural administration of saline or the thermoresponsive hydrogel to an A549 xenograft model in female Athymic Nude-Foxn1nu mice (n = 6/group), localisation was confirmed using IVIS imaging. Tumour volume was assessed using callipers measurements over 14 days. Blood serum was analysed for liver and kidney damage and ex vivo tissue samples were histologically assessed.

RESULTS

The thermoresponsive hydrogel demonstrated a dose-dependent cancer cell-specific toxicity in vitro and was retained in situ for at least 14 days in the xenograft model. Tumour volume increase was statistically significantly lower than saline treated control at day 14 (n = 6, p = 0.0001), with no associated damage of hepatic or renal tissue observed.

CONCLUSIONS

Presented is a poloxamer-based thermoresponsive hydrogel, suitable for intratumoural administration and retention, which has demonstrated preliminary evidence of local tumour control, with minimal off-site toxicity.

An injectable thermosensitive hydrogel self-supported by nanoparticles of PEGylated amino-modified PCL for enhanced local tumor chemotherapy

We synthesized amino-modified poly(ε-caprolactone) PCN-b-PEG-b-PCN (PECN) triblock copolymers and studied the contribution of the introduced amino groups to the drug delivery efficiency of PECN nanoparticles (NPs) and their injectable thermosensitive hydrogels. PECN15 with an optimal amino group content was obtained. Firstly, the hydrophobic drug paclitaxel (PTX) was loaded into PECN15 up to 5.91% and formed PTX/PECN NPs 90 nm in size and with a slightly positive charge (7.3 mV). Furthermore, the injectable PTX/PECN NPs aqueous solution (25 wt%) at ambient temperature could undergo fast gelation at 37 °C and sustainedly release PTX/PECN NPs in 10 days. More importantly, compared with our previously reported PECT NPs, the PECN NPs without an increase in toxicity could improve the cell uptake and enhance intracellular drug release by responding to the acidic environment of the endosome. Thus, the PTX/PECN NPs presented a lower IC50 of 3.14 μg mL-1 than that of the PTX/PECT NPs (7.67 μg mL-1) and free PTX (4.65 μg mL-1). Moreover, through peritumoral injection, the PTX/PECNGel showed 94.27% inhibition rate of tumor growth on day 19, higher than PTX/PECTGel (72.28%) and Taxol® (47.03%). Therefore, the PECN NPs hydrogel provided a more effective injectable platform to enhance local cancer chemotherapy, and also provided the possibility of further functionalization by the reactive amino groups.

Doxorubicin Loaded Poloxamer Thermosensitive Hydrogels: Chemical, Pharmacological and Biological Evaluation

(1) Background: doxorubicin is a potent chemotherapeutic agent, but it has limitations regarding its side effects and therapy resistance. Hydrogels potentially deal with these problems, but several characterizations need to be optimized to better understand how hydrogel assisted chemotherapy works. Poloxamer 407 (P407) hydrogels were mixed with doxorubicin and physico-chemical, biological, and pharmacological characterizations were considered. (2) Methods: hydrogels were prepared by mixing P407 in PBS at 4 °C. Doxorubicin was added upon solutions became clear. Time-to-gelation, hydrogel morphology, and micelles were studied first. The effects of P407-doxorubicin were evaluated on MC-38 colon cancer cells. Furthermore, doxorubicin release was assessed and contrasted with non-invasive in vivo whole body fluorescence imaging. (3) Results: 25% P407 had favorable gelation properties with pore sizes of 30–180 µm. P407 micelles were approximately 5 nm in size. Doxorubicin was fully released in vitro from 25% P407 hydrogel within 120 h. Furthermore, P407 micelles strongly enhanced the anti-neoplastic effects of doxorubicin on MC-38 cells. In vivo fluorescence imaging revealed that hydrogels retained fluorescence signals at the injection site for 168 h. (4) Conclusions: non-invasive imaging showed how P407 gels retained drug at the injection site. Doxorubicin P407 micelles strongly enhanced the anti-tumor effects.

A polymeric paste-drug formulation for intratumoral treatment of prostate cancer

OBJECTIVE

Focal therapy has emerged as a treatment option for low- to intermediate-risk localized prostate cancer (PCa) patients, to balance the risks for urinary and sexual morbidity of radical treatment with the psychological burden of active surveillance. In this context, we developed ST-4PC, an injectable, polymeric paste formulation containing docetaxel (dtx) and bicalutamide (bic) for image-guided focal therapy of PCa. The objective of this work was to evaluate the in vitro characteristics and in vivo toxicity and efficacy of ST-4PC.

MATERIAL AND METHODS

In vitro drug release was evaluated using high-performance liquid chromatography. In vivo toxicity of blank- and drug-loaded ST-4PC was assessed in mice and rats. Tumor growth inhibition was evaluated in LNCaP subcutaneous (s.c.) and LNCaP-luc orthotopic xenograft models. Using the s.c. model, mice were monitored weekly for weight loss, tumor volume (TV) and serum PSA. For the orthotopic model, mice were additionally monitored for bioluminescence as measure of tumor growth.

RESULTS

ST-4PC demonstrated a sustained and steady release of incorporated drugs with 50% dtx and 20% bic being released after 14 days. While no systemic toxicity was observed, dose-dependent local side effects from dtx developed in the s.c. but not in the orthotopic model, illustrating the limitations of s.c. models for evaluating local cytotoxic therapy. In the s.c. model, 0.1%/4% and 0.25%/4% dtx/bic ST-4PC paste significantly reduced PSA progression, but did not have a significant inhibitory effect on TV. ST-4PC loaded with 1%/4% dtx/bic significantly reduced TV, serum PSA, and bioluminescence in the orthotopic xenograft model. Compared with drugs dissolved in DMSO, ST-4PC significantly delayed tumor growth.

CONCLUSION

Image-guided focal therapy using ST-4PC demonstrated promising inhibition of PSA progression and orthotopic tumor growth in vivo without significant toxicity, and warrants further clinical evaluation.

Injectable Hydrogels for Localized Cancer Therapy

Traditional intravenous chemotherapy is relative to many systemic side effects, including myelosuppression, liver or kidney dysfunction, and neurotoxicity. As an alternative method, the injectable hydrogel can efficiently avoid these problems by releasing drugs topically at the tumor site. With advantages of localized drug toxicity in the tumor site, proper injectable hydrogel as the drug delivery system has become a research hotspot. Based on different types and stages of cancer, a variety of hydrogel drug delivery systems were developed, including thermosensitive, pH-sensitive, photosensitive, and dual-sensitive hydrogel. In this review, the latest developments of these hydrogels and related drug delivery systems were summarized. In summary, our increasing knowledge of injectable hydrogel for localized cancer therapy ensures us that it is a more durable and effective approach than traditional chemotherapy. Smart release system reacting to different stimuli at different time according to the micro-environment changes in the tumor site is a promising tendency for further studies.

Injectable Hydrogels for Cancer Therapy over the Last Decade

The interest in injectable hydrogels for cancer treatment has been significantly growing over the last decade, due to the availability of a wide range of starting polymer structures with tailored features and high chemical versatility. Many research groups are working on the development of highly engineered injectable delivery vehicle systems suitable for combined chemo-and radio-therapy, as well as thermal and photo-thermal ablation, with the aim of finding out effective solutions to overcome the current obstacles of conventional therapeutic protocols. Within this work, we have reviewed and discussed the most recent injectable hydrogel systems, focusing on the structure and properties of the starting polymers, which are mainly classified into natural or synthetic sources. Moreover, mapping the research landscape of the fabrication strategies, the main outcome of each system is discussed in light of possible clinical applications.

Harmonious Biomaterials for Development of In situ Approaches for Locoregional Delivery of Anti-cancer Drugs: Current Trends

Locoregional drug delivery is a novel approach for the effective delivery of anti-cancer agents as it exposes the tumors to high concentration of drugs. In situ gelling systems have fetched paramount attention in the field of localized cancer chemotherapy due to their targeted delivery, ease of preparation, prolonged or sustained drug release and improved patient compliance. Numerous polymers have been investigated for their properties like swelling along with biodegradation, drug release and physicochemical properties for successful targeting of the drugs at the site of implantation. The polymers such as chitosan, Hyaluronic Acid (HA), poloxamer, Poly Glycolic Lactic Acid (PGLA) and Poly Lactic Acid (PLA) tend to form in situ hydrogels and have been exploited to develop localized delivery vehicles. These formulations are administered in the solution form and on exposure to physiological environment such as temperature, pH or ionic composition they undergo phase conversion into a hydrogel drug depot. The use of in situ gelling approach has provided prospects to increase overall survival and life quality of cancer patient by enhancing the bioavailability of drug to the site of tumor by minimizing the exposure to normal cells and alleviating systemic side effects. Because of its favorable safety profile and clinical benefits, United States Food and Drug Administration (U.S. FDA) has approved polymer based in situ systems for prolonged locoregional activity. This article discusses the rationale for developing in situ systems for targeted delivery of anti-cancer agents with special emphasis on types of polymers used to formulate the in situ system. In situ formulations for locoregional anti-cancer drug delivery that are marketed and are under clinical trials have also been discussed in detail in this article.

Polymeric Co-Delivery Systems in Cancer Treatment: An Overview on Component Drugs' Dosage Ratio Effect

Multiple factors are involved in the development of cancers and their effects on survival rate. Many are related to chemo-resistance of tumor cells. Thus, treatment with a single therapeutic agent is often inadequate for successful cancer therapy. Ideally, combination therapy inhibits tumor growth through multiple pathways by enhancing the performance of each individual therapy, often resulting in a synergistic effect. Polymeric nanoparticles prepared from block co-polymers have been a popular platform for co-delivery of combinations of drugs associated with the multiple functional compartments within such nanoparticles. Various polymeric nanoparticles have been applied to achieve enhanced therapeutic efficacy in cancer therapy. However, reported drug ratios used in such systems often vary widely. Thus, the same combination of drugs may result in very different therapeutic outcomes. In this review, we investigated polymeric co-delivery systems used in cancer treatment and the drug combinations used in these systems for synergistic anti-cancer effect. Development of polymeric co-delivery systems for a maximized therapeutic effect requires a deeper understanding of the optimal ratio among therapeutic agents and the natural heterogenicity of tumors.

Alternating block copolymer-based nanoparticles as tools to modulate the loading of multiple chemotherapeutics and imaging probes

Cancer therapy often relies on the combined action of different molecules to overcome drug resistance and enhance patient outcome. Combined strategies relying on molecules with different pharmacokinetics often fail due to the lack of concomitant tumor accumulation and, thus, to the loss of synergistic effect. Due to their ability to enhance treatment efficiency, improve drug pharmacokinetics, and reduce adverse effects, polymer nanoparticles (PNPs) have been widely investigated as co-delivery vehicles for cancer therapies. However, co-encapsulation of different drugs and probes in PNPs requires a flexible polymer platform and a tailored particle design, in which both the bulk and surface properties of the carriers are carefully controlled. In this work, we propose a core-shell PNP design based on a polyurethane (PUR) core and a phospholipid external surface. The modulation of the hydrophilic/hydrophobic balance of the PUR core enhanced the encapsulation of two chemotherapeutics with dramatically different water solubility (Doxorubicin hydrochloride, DOXO and Docetaxel, DCTXL) and of Iron Oxide Nanoparticles for MRI imaging. The outer shell remained unchanged among the platforms, resulting in un-modified cellular uptake and in vivo biodistribution. We demonstrate that the choice of PUR core allowed a high entrapment efficiency of all drugs, superior or comparable to previously reported results, and that higher core hydrophilicity enhances the loading efficiency of the hydrophilic DOXO and the MRI contrast effect. Moreover, we show that changing the PUR core did not alter the surface properties of the carriers, since all particles showed a similar behavior in terms of cell internalization and in vivo biodistribution. We also show that PUR PNPs have high passive tumor accumulation and that they can efficient co-deliver the two drugs to the tumor, reaching an 11-fold higher DOXO/DCTXL ratio in tumor as compared to free drugs. STATEMENT OF SIGNIFICANCE: Exploiting the synergistic action of multiple chemotherapeutics is a promising strategy to improve the outcome of cancer patients, as different agents can simultaneously engage different features of tumor cells and/or their microenvironment. Unfortunately, the choice is limited to drugs with similar pharmacokinetics that can concomitantly accumulate in tumors. To expand the spectrum of agents that can be delivered in combination, we propose a multi-compartmental core-shell nanoparticles approach, in which the core is made of biomaterials with high affinity for drugs of different physical properties. We successfully co-encapsulated Doxorubicin Hydrochloride, Docetaxel, and contrast agents and achieved a significantly higher concomitant accumulation in tumor versus free drugs, demonstrating that nanoparticles can improve synergistic cancer chemotherapy.

Pluronic F127 blended polycaprolactone scaffolds via e-jetting for esophageal tissue engineering

Several attempts have been made to fabricate esophageal tissue engineering scaffolds. However, most of these scaffolds possess randomly oriented fibres and uncontrollable pore sizes. In order to mimic the native esophageal tissue structure, electro-hydrodynamic jetting (e-jetting) was used in this study to fabricate scaffolds with aligned fibres and controlled pore size. A hydrophilic additive, Pluronic F127 (F127), was blended with polycaprolactone (PCL) to improve the wettability of the scaffolds and hence the cell adhesion. PCL/F127 composite scaffolds with different weight ratios (0-12%) were fabricated. The wettability, phase composition, and the mechanical properties of the fabricated scaffolds were investigated. The results show that the e-jetted scaffolds have controllable fibres orientated in two perpendicular directions, which are similar to the human esophagus structure and suitable pore size for cell infiltration. In addition, the scaffolds with 8% F127 exhibited better wettability (contact angle of 14°) and an ultimate tensile strength (1.2 MPa) that mimics the native esophageal tissue. Furthermore, primary human esophageal fibroblasts were seeded on the e-jetted scaffolds. PCL/F127 scaffolds showed enhanced cell proliferation and expression of the vascular endothelial growth factor (VEGF) compared to pristine PCL scaffolds (1.5- and 25.8- fold increase, respectively; P < 0.001). An in vitro wound model made using the PCL/F127 scaffolds showed better cell migration than the PCL scaffolds. In summary, the PCL/F127 e-jetted scaffolds offer a promising strategy for the esophagus tissue repair.

Biopolymers for Antitumor Implantable Drug Delivery Systems: Recent Advances and Future Outlook

In spite of remarkable improvements in cancer treatments and survivorship, cancer still remains as one of the major causes of death worldwide. Although current standards of care provide encouraging results, they still cause severe systemic toxicity and also fail in preventing recurrence of the disease. In order to address these issues, biomaterial-based implantable drug delivery systems (DDSs) have emerged as promising therapeutic platforms, which allow local administration of drugs directly to the tumor site. Owing to the unique properties of biopolymers, they have been used in a variety of ways to institute biodegradable implantable DDSs that exert precise spatiotemporal control over the release of therapeutic drug. Here, the most recent advances in biopolymer-based DDSs for suppressing tumor growth and preventing tumor recurrence are reviewed. Novel emerging biopolymers as well as cutting-edge polymeric microdevices deployed as implantable antitumor DDSs are discussed. Finally, a review of a new therapeutic modality within the field, which is based on implantable biopolymeric DDSs, is given.

Evaluation of micelles incorporated into thermosensitive hydrogels for intratumoral delivery and controlled release of docetaxel: A dual approach for in situ treatment of tumors

The in situ gelling hybrid hydrogel system has been reported to effectively concentrate chemotherapeutic drugs at the tumor site and sustain their release for a long period. DTX-micelles (docetaxel-loaded mixed micelles) are able to increase the solubility of DTX in water, and then a high drug loading rate of hydrogels can be achieved by encapsulating the docetaxel-loaded mixed micelles into the hydrogels. The thermosensitive nature of DTX-MM-hydrogels (thermosensitive hydrogels incorporated with docetaxel-loaded mixed micelles) can accelerate the formation of a depot of this drug-loaded system at the site of administration. Therefore, the hydrogels provide a much slower release compared with DTX-micelles and DTX-injection. An in vivo retention study has demonstrated that the DTX-MM-hydrogels can prolong the drug retention time and in vivo trials have shown that the DTX-MM-hydrogels have a higher antitumor efficacy and systemic safety. In conclusion, the DTX-MM-hydrogels prepared in this study have considerable potential as a drug delivery system, with higher tumor inhibition effects and are less toxic to normal tissues.

Unified D-α-Tocopherol 5-Fu/SAHA bioconjugates self-assemble as complex nanodrug for optimized combination therapy

Aim: To optimize the synergistic efficacy of combination therapy with controlled molar ratio, complex small molecule-based nanodrug (Co-SMND) of 5-fluorouracil (5-Fu)/vorinostat (SAHA) was developed. Materials & methods: Co-SMND with various ratios of 5-Fu-D-α-tocopherol (VE)/SAHA-VE were prepared and characterized including co-assembly mechanism, hydrolytic stability, cytotoxicity, synergistic effect and apoptosis inducing ability. The antitumor activity, systematic toxicity and biodistribution of optimized Co-SMND were evaluated in CT-26 bearing BALB/c mouse. Results: Maximal synergistic effect of Co-SMND could be obtained via simply adjusting the feeding molar ratio. The optimized Co-SMND showed superior in vivo antitumor efficacy, upregulated security and selective intratumoral accumulation. Conclusion: Such Co-SMND is of great significance for future clinical translation, and would be an efficient platform for combination chemotherapy.

Sustained drug release and cancer treatment by an injectable and biodegradable cyanoacrylate-based local drug delivery system

Sustained drug release at specific sites is clinically favorable for the treatment of many diseases. The discovery of new polymeric materials suitable for prolonging drug release, improving therapeutic efficiency, and decreasing systemic toxicity is always of great interest in local sustained-release drug delivery systems (LSRDDSs). In this study, a new cross-linked cyanoacrylate (CA)-based LSRDDS is developed, in which the drug depot consists of a formulation of methoxyethyl cyanoacrylate (MOE-CA) with the cross-linking agent CA-PEG-CA. The MOE-CA endowed the CA polymer with good degradability. The drug-release profile could be affected by the structure and composition ratio of the MOE-CA/CA-PEG-CA monomer. The liquid CA monomer could dissolve the drug without using other solvents, and could polymerize into a solid glue just in a few seconds after injection. An optimal formulation loaded with 5-fluorouracil (J-Fu-1.25) showed excellent anticancer activity both in vitro and in vivo, with 50% survival of the mice and no significant systemic toxicity detected during the experiment. The CA depot might affect the blood flow in microvessels of tumors, thus contributing to the synergetic anticancer effect of 5-fluorouracil. We believe that this work provides a practical, biodegradable, and biocompatible LSRDDS for chemotherapeutic drug delivery that can also be applied universally with various drugs for certain therapeutic aims.

Determination of total and unbound docetaxel in plasma by ultrafiltration and UPLC-MS/MS: application to pharmacokinetic studies

A sensitive and specific liquid chromatographic/tandem mass spectrometric (LC-MS/MS) method was developed and validated for quantifying total and unbound docetaxel drug concentrations in plasma. Calibration curves for unbound and total docetaxel were linear over the respective ranges of 0.108~10.8 and 0.54~216 ng/mL. The intra- and interday assay accuracy and precision did not exceed 15%. The methods were validated to show the standard range linearity, sensitivity, selectivity, accuracy, precision, and stability of docetaxel in the matrices tested. In addition, this method is fast and simple with a short run time of 4.5 min and a small plasma sample volume (500 µL). The validated method was successfully applied to a pharmacokinetic study of a docetaxel micelle formulation in rat plasma after intravenous administration at a dose of 10 mg/kg. Docetaxel micelles slowly released their drug payload, and protein-bound, unbound, and micellar drug pools existed simultaneously. These various forms in plasma pools were also measured in the study. We confirmed that most of the docetaxel in plasma was micelle-associated (96.52% at 24 h and 83.14% at 72 h) after micellar docetaxel administration, as a result of sequestration of the drug in long-circulating micelles.

Recent advances in co-delivery systems based on polymeric nanoparticle for cancer treatment

Cancer is a broad term for a class of prevalent diseases as one in three people develop cancer during their lifetime. Although, there are few success stories of cancer therapy, most of the existing medications do not lead to complete recovery. Because of the complexity of cancer, usually a single therapeutic approach is insufficient for the suppression of cancer growth and metastasis. Simultaneous loading and co-delivery of different agents with different physiochemical characteristics to the same tumors have been suggested for minimizing the dose of anticancer drugs and achieving the synergistic therapeutic impacts in cancers treatment. Intense work to develop nanotechnology-based systems as a suitable option for cancer treatment is currently underway. The purpose of this review is to provide an overview of the co-delivery systems based on polymeric nanoparticles including polymeric micelles, dendrimers, poly-d,l-lactide-co-glycolide, polyethylenimine, poly(l-lysine) and chitosan for efficacious cancer therapy.

Recent advances in nanocarrier-loaded gels: Which drug delivery technologies against which diseases?

The combination of pharmaceutical technologies can be a wise choice for developing innovative therapeutic strategies. The association of nanocarriers and gels provides new therapeutic possibilities due to the combined properties of the two technologies. Gels support the nanocarriers, localize their administration to the target tissue, and sustain their release. In addition to the properties afforded by the gel, nanocarriers can provide additional drug sustained release or different pharmacokinetic and biodistribution profiles than those from nanocarriers administered by the conventional route to improve the drug therapeutic index. This review focuses on recent (over the last ten years) in vivo data showing the advances and advantages of using nanocarrier-loaded gels. Liposomes, micelles, liquid and solid lipid nanocapsules, polymeric nanoparticles, dendrimers, and fullerenes are all nanotechnologies which have been recently assessed for medical applications, such as cancer therapy, the treatment of cutaneous and infectious diseases, anesthesia, the administration of antidepressants, and the treatment of unexpected diseases, such as alopecia.

Multifunctional magnetic co-delivery system coated with polymer mPEG-PLL-FA for nasopharyngeal cancer targeted therapy and MR imaging

The gene and drug co-delivery system has become one of the primary strategies to overcome cancers. Here, we designed a multifunctional magnetic co-delivery system for nasopharyngeal carcinoma-targeted therapy and MR imaging. Aldehyde sodium alginate (ASA) was used to decorate the oxide iron and load cisplain through coordinate bond to form a core complex. The polymer shell poly(l-lysine)-methoxy-polyethylene glycol-folate was used to coat the core complex through electric interaction to give this nano-medicine a target ability. And this polymer could also give the nano-medicine abilities to adhere and protect DNA, and enhance its solubleness in water. After being transfected with this nano-medicine, the plasmids which contain cancer suppressor gene TFPI2 could enter and express in HNE-1 cells. It caused a higher death and apoptosis rate, inhibited nasopharyngeal carcinoma cells' migration and cloning by the synergic effect together with cisplain. Besides, clear images of this nano-medicine could be got under T2 MR imaging. This magnetic co-delivery system demonstrates a potential as a powerful multifunctional vector for drug delivery and gene vector applications in nasopharyngeal carcinoma.

131I-labeled and DOX-loaded multifunctional nanoliposomes for radiotherapy and chemotherapy in brain gliomas

The codelivery of different therapeutics is a promising option because of its synergetic effects of drugs. In this study, a new combination therapy that used the doxorubicin-loaded and ¹³¹I-labeled nanoliposomes (¹³¹I-DOX-NL) was proposed to delay tumor growth of gliomas, which are characterized by significant mortality and morbidity. ¹³¹I-DOX-NL was constructed based on bovine serum albumin (BSA)-tailor made hydrophobic maleimide-functionalized poly(ε-caprolactone) (PCL) (Fig. 1) and was evaluated by cellular viability in vitro and by U87 xenograft models in vivo. Compared with using ¹³¹I-NL or DOX-NL alone, our experimental results show that ¹³¹I-DOX-NL exhibits similar high cellular uptake but enhanced efficacy to cure gliomas because of its codelivery of ¹³¹I and DOX. In the U87 mouse tumor models, the combination therapy resulted in higher survival rates of mice and smaller tumor sizes than monotherapy did alone. In conclusion, multifunctional nanoliposome ¹³¹I-DOX-NL is a good candidate for the codelivery of ¹³¹I-mediated radiotherapy and DOX-mediated chemotherapy due to its ability to inhibit U87 cell proliferation and tumor growth. ¹³¹I-DOX-NL can be used as a promising effective therapy for malignant gliomas and deserves further investigation.

A comparative investigation between paclitaxel nanoparticle- and nanocrystal-loaded thermosensitive PECT hydrogels for peri-tumoural administration

For in situ thermosensitive hydrogels, it is a big challenge to achieve high drug loading, long-term local retention, and effective drug release simultaneously. To address these issues, we combined the strategy of drug nanocrystals (NCs) and thermosensitive hydrogels with higher gel strength. In particular, we developed paclitaxel NC-based hydrogels using PECT, a thermosensitive polymer synthesized by us (PTX-NC-PECT), and a nanoparticle-based system was used as the control (PTX-NP-PECT). First, high levels of PTX could be loaded in both PECT hydrogels. Moreover, in vivo near infrared fluorescence (NIRF) imaging showed that both hydrogel systems were able to maintain the payloads of 1,1-dioctadecyltetramethyl indotricarbocyanine iodide (DiR) at a peri-tumoural site for at least 21 days, much longer than that achieved with the control hydrogel of Pluronic® F127. Furthermore, we observed that PTX-NCs released free PTX more effectively and homogeneously than PTX-NPs in vitro. It was further verified in vivo that the release of DiR from DiR-NC-PECT was more complete than that from DiR-NP-PECT. Finally, PTX-NC-PECT gel demonstrated the strongest anti-tumour efficacy on MCF-7 breast cancer. In conclusion, PTX-NC-PECT hydrogel might be a high-performance thermosensitive hydrogel for local cancer therapy.