A pH and redox dual stimuli-responsive poly(amino acid) derivative for controlled drug release

Monodisperse Polyaspartic Acid Derivative Microspheres for Potential Tumor Embolization Therapy

Polyaspartic acid derivatives are a well-known kind of polypeptide with good biocompatibility and biodegradability, and thus have been widely used as biomedical materials, including drug-loaded nano-scale micelles or macroscopic hydrogels. In this work, for the first time, monodisperse polyaspartic acid derivative microspheres with diameter ranging from 120 to 350 µm for potential tumor embolization therapy are successfully prepared by single emulsion droplet microfluidic technique. The obtained microsphere shows fast cationic anticancer drug doxorubicin hydrochloride loading kinetics with high loading capacity, which is much better than those of the commercial ones. Additionally, drug release behaviors of the drug-loaded microspheres with different diameters in different media are also studied and discussed in detail. These results provide some new insights for the preparation and potential application of polyaspartic acid derivative-based monodisperse microspheres, especially for their potential application as embolic agent.

Self-Assembled Fluorinated Nanoparticles as Sensitive and Biocompatible Theranostic Platforms for 19F MRI

Theranostics is a novel paradigm integrating therapy and diagnostics, thereby providing new prospects for overcoming the limitations of traditional treatments. In this context, perfluorocarbons (PFCs) are the most widely used tracers in preclinical fluorine-19 magnetic resonance (19F MR), primarily for their high fluorine content. However, PFCs are extremely hydrophobic, and their solutions often display reduced biocompatibility, relative instability, and subpar 19F MR relaxation times. This study aims to explore the potential of micellar 19F MR imaging (MRI) tracers, synthesized by polymerization-induced self-assembly (PISA), as alternative theranostic agents for simultaneous imaging and release of the non-steroidal antileprotic drug clofazimine. In vitro, under physiological conditions, these micelles demonstrate sustained drug release. In vivo, throughout the drug release process, they provide a highly specific and sensitive 19F MRI signal. Even after extended exposure, these fluoropolymer tracers show biocompatibility, as confirmed by the histological analysis. Moreover, the characteristics of these polymers can be broadly adjusted by design to meet the wide range of criteria for preclinical and clinical settings. Therefore, micellar 19F MRI tracers display physicochemical properties suitable for in vivo imaging, such as relaxation times and non-toxicity, and high performance as drug carriers, highlighting their potential as both diagnostic and therapeutic tools.

A Pyr-loaded polymer microparticle for effectively controlling Solenopsis invicta (Hymenoptera: Formicidae) in the nest

Human interference and incorrect use of pesticides are easy to induce red imported fire ant (RIFA) escape and migrate from a nest, resulting in ineffective control of RIFA. In order to avoid RIFA alert, we designed an amphiphilic PSI-mPEG-Boc-DAH loaded Pyr to make the microparticles with effective controlled release. The investigation showed that the quantity of Pyr released by Pyr@PSI-mPEG-Boc-DAH under acidic environment was only 36.40 ± 1.90% at 48 h, whereas the release rate of original Pyr was 75.23 ± 5.71%. And the RIFA mortality rate of 1 ppm Pyr in Pyr@PSI-mPEG-Boc-DAH microparticles at 48 h was only 7.78%, which was significantly lower than that of the Pyr (47.78%). Futhermore, the death rate increased sharply after 48 h, and reached 95.84% within a week after using Pyr@PSI-mPEG-Boc-DAH microparticles. Moreover, PSI-mPEG-Boc-DAH carriers could be absorbed and even transported to crop of the RIFA for subsequent trophallaxis by using fluorescence tracking. In the field experiment, the reduction rate of Pyr@PSI-mPEG-Boc-DAH treatment was achieved 99.89% after 7 d. Pyr@PSI-mPEG-Boc-DAH didn't cause RIFA to be alarmed within 48 h and could kill nearly all of ants in the nest after 7 d, which showed a very good control effect in the field experiment. This work provided a new idea and guidance for the effective control RIFA and the development of sustainable agriculture.

Targeted delivery of emamectin benzoate by functionalized polysuccinimide nanoparticles for the flowering cabbage and controlling Plutella xylostella

BACKGROUND

Plutella xylostella, one of the most destructive and cosmopolitan pests of cruciferous crops, is especially harmful to the young tissues of the flowering cabbage (Brassica campestris L.). Although emamectin benzoate (EB) has high insecticidal activity against P. xylostella, one major reason of low utilization for EB is the lack of internal transport in the young plants.

RESULTS

In this study, four kinds of functional EB/polysuccinimide (PSI) with glycine methylester nanoparticles (EB@PGA NPs) were prepared. The obtained EB@PGA NPs could effectively protect EB from photolysis, and the degradation rate of EB@PGA NPs was <30% in 24 h. Simulating the intestinal pH = 9 of P. xylostella, the highest cumulative release rate of EB@PGA NPs could reach 89.61% in 24 h. Furthermore, EB@PGA NPs could delivery EB into the young tissues of the flowering cabbage through the nanocarrier, and the highest transport efficiency of EB@PGA₂₅ reached 1.437%. The bioactivity of EB@PGA₂₅ against P. xylostella larvae (LC₅₀  = 0.34 μg mL^-1 ) was 1.6-fold higher than that of EB (LC₅₀  = 0.53 μg mL^-1 ). EB@PGA could easily become 'internalized' into the intestinal wall of P. xylostella, thus increasing the penetration of the drug and enhancing the insecticidal activity.

CONCLUSION

The accurate delivery of insecticides by PGA nanocarriers into young tissues of plants could be a promising new method for the efficient management of field pests and diseases. © 2021 Society of Chemical Industry.

Construction of disulfide containing redox-responsive polymeric nanomedicine

Disulfide bonds (S-S) are widely found in chemistry, biology, and materials science. Polymer nanomaterials containing disulfide bonds with a variety of excellent properties have great potential as drug and gene delivery carriers. The disulfide bond can exist stably in extracellular environment, but upon entering cancer cells, it will undergo a sulfhydryl-disulfide bond exchange reaction with glutathione (GSH) in the cytoplasm, causing the disulfide bond cleavage. Therefore, polymeric nanomaterials containing disulfide bonds are promising in cancer treatment due to the elevated GSH concentration inside cancer cells. This review highlights various synthetic approaches to prepare disulfide containing redox-responsive polymeric nanomedicine, including synthesis of disulfide bonds containing polymers, construction of polymeric nanoparticle with shell or core crosslinked disulfide bonds, preparation of polymer-drug conjugates via disulfide linkers, and disulfide linked responsive payloads.

Dually Cross-Linked Core-Shell Structure Nanohydrogel with Redox-Responsive Degradability for Intracellular Delivery

A redox-responsive nanocarrier is a promising strategy for the intracellular drug release because it protects the payload, prevents its undesirable leakage during extracellular transport, and favors site-specific drug delivery. In this study, we developed a novel redox responsive core-shell structure nanohydrogel prepared by a water in oil nanoemulsion method using two biocompatible synthetic polymers: vinyl sulfonated poly(N-(2-hydroxypropyl) methacrylamide mono/dilactate)-polyethylene glycol-poly(N-(2-hydroxypropyl) methacrylamide mono/dilactate) triblock copolymer, and thiolated hyaluronic acid. The influence on the nanohydrogel particle size and distribution of formulation parameters was investigated by a three-level full factorial design to optimize the preparation conditions. The surface and core-shell morphology of the nanohydrogel were observed by scanning electron microscope, transmission electron microscopy, and further confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy from the standpoint of chemical composition. The redox-responsive biodegradability of the nanohydrogel in reducing environments was determined using glutathione as reducing agent. A nanohydrogel with particle size around 250 nm and polydispersity index around 0.1 is characterized by a thermosensitive shell which jellifies at body temperature and crosslinks at the interface of a redox-responsive hyaluronic acid core via the Michael addition reaction. The nanohydrogel showed good encapsulation efficiency for model macromolecules of different molecular weight (93% for cytochrome C, 47% for horseradish peroxidase, and 90% for bovine serum albumin), capacity to retain the peroxidase-like enzymatic activity (around 90%) of cytochrome C and horseradish peroxidase, and specific redox-responsive release behavior. Additionally, the nanohydrogel exhibited excellent cytocompatibility and internalization efficiency into macrophages. Therefore, the developed core-shell structure nanohydrogel can be considered a promising tool for the potential intracellular delivery of different pharmaceutical applications, including for cancer therapy.

Stimuli-Responsive Poly(aspartamide) Derivatives and Their Applications as Drug Carriers

Poly(aspartamide) derivatives, one kind of amino acid-based polymers with excellent biocompatibility and biodegradability, meet the key requirements for application in various areas of biomedicine. Poly(aspartamide) derivatives with stimuli-responsiveness can usually respond to external stimuli to change their chemical or physical properties. Using external stimuli such as temperature and pH as switches, these smart poly(aspartamide) derivatives can be used for convenient drug loading and controlled release. Here, we review the synthesis strategies for preparing these stimuli-responsive poly(aspartamide) derivatives and the latest developments in their applications as drug carriers.

Poly(aspartic acid) in Biomedical Applications: From Polymerization, Modification, Properties, Degradation, and Biocompatibility to Applications

Poly(aspartic acid) (PASP) is an anionic polypeptide that is a highly versatile, biocompatible, and biodegradable polymer that fulfils key requirements for use in a wide variety of biomedical applications. The derivatives of PASP can be readily tailored via the amine-reactive precursor, poly(succinimide) (PSI), which opens up a large window of opportunity for the design and development of novel biomaterials. PASP also has a strong affinity with calcium ions, resulting in complexation, which has been exploited for bone targeting and biomineralization. In addition, recent studies have further verified the biocompatibility and biodegradability of PASP-based polymers, which is attributed to their protein-like structure. In light of growing interest in PASP and its derivatives, this paper presents a comprehensive review on their synthesis, characterization, modification, biodegradation, biocompatibility, and applications in biomedical areas.

Development of a New Hyaluronic Acid Based Redox-Responsive Nanohydrogel for the Encapsulation of Oncolytic Viruses for Cancer Immunotherapy

Oncolytic viruses (OVs) are emerging as promising and potential anti-cancer therapeutic agents, not only able to kill cancer cells directly by selective intracellular viral replication, but also to promote an immune response against tumor. Unfortunately, the bioavailability under systemic administration of OVs is limited because of undesired inactivation caused by host immune system and neutralizing antibodies in the bloodstream. To address this issue, a novel hyaluronic acid based redox responsive nanohydrogel was developed in this study as delivery system for OVs, with the aim to protect the OVs following systemic administration. The nanohydrogel was formulated by water in oil (W/O) nanoemulsion method and cross-linked by disulfide bonds derived from the thiol groups of synthesized thiolated hyaluronic acid. One DNA OV Ad[I/PPT-E1A] and one RNA OV Rigvir^® ECHO-7 were encapsulated into the developed nanohydrogel, respectively, in view of their potential of immunovirotherapy to treat cancers. The nanohydrogels showed particle size of approximately 300–400 nm and negative zeta potential of around −13 mV by dynamic light scattering (DLS). A uniform spherical shape of the nanohydrogel was observed under the scanning electron microscope (SEM) and transmission electron microscope (TEM), especially, the successfully loading of OV into nanohydrogel was revealed by TEM. The crosslinking between the hyaluronic acid chains was confirmed by the appearance of new peak assigned to disulfide bond in Raman spectrum. Furthermore, the redox responsive ability of the nanohydrogel was determined by incubating the nanohydrogel into phosphate buffered saline (PBS) pH 7.4 with 10 μM or 10 mM glutathione at 37 °C which stimulate the normal physiological environment (extracellular) or reductive environment (intracellular or tumoral). The relative turbidity of the sample was real time monitored by DLS which indicated that the nanohydrogel could rapidly degrade within 10 h in the reductive environment due to the cleavage of disulfide bonds, while maintaining the stability in the normal physiological environment after 5 days. Additionally, in vitro cytotoxicity assays demonstrated a good oncolytic activity of OVs-loaded nanohydrogel against the specific cancer cell lines. Overall, the results indicated that the developed nanohydrogel is a delivery system appropriate for viral drugs, due to its hydrophilic and porous nature, and also thanks to its capacity to maintain the stability and activity of encapsulated viruses. Thus, nanohydrogel can be considered as a promising candidate carrier for systemic administration of oncolytic immunovirotherapy.

Stimuli-Responsive Nanomaterials for Application in Antitumor Therapy and Drug Delivery

The new era of nanotechnology has produced advanced nanomaterials applicable to various fields of medicine, including diagnostic bio-imaging, chemotherapy, targeted drug delivery, and biosensors. Various materials are formed into nanoparticles, such as gold nanomaterials, carbon quantum dots, and liposomes. The nanomaterials have been functionalized and widely used because they are biocompatible and easy to design and prepare. This review mainly focuses on nanomaterials responsive to the external stimuli used in drug-delivery systems. To overcome the drawbacks of conventional therapeutics to a tumor, the dual- and multi-responsive behaviors of nanoparticles have been harnessed to improve efficiency from a drug delivery point of view. Issues and future research related to these nanomaterial-based stimuli sensitivities and the scope of stimuli-responsive systems for nanomedicine applications are discussed.

Dual responsive linalool capsules with high loading ratio for excellent antioxidant and antibacterial efficiency

Linalool is a main component in different naturally derived essential oils, and widely used in household, personal care, food and therapeutic formulations. However, the application is limited due to its high volatility and low stability. In this study, an effective encapsulation with high loading ratio was built up together with thermal-redox dual responsiveness and controlled release properties. The emulsified linalool droplets were modified with carbon-carbon double bonds, followed by the precipitation polymerization with thermal sensitive monomer, N-vinyl caprolactam. The average size and the loading ratio of the prepared linalool capsules were 1.4 μm and 50.41 wt%. The linalool capsules exhibited thermal-redox dual responsive properties and the antioxidant-antibacterial performance. Especially, responding to the stimuli mimicking practical circumstance, the synthesized capsules presented excellent bacteria inhibiting effect. This work may open a new path for fragrance and essential oil encapsulation, enlarging them as the green biological antibacterial agents in different applications.

Tracking Gold Nanorods' Interaction with Large 3D Pancreatic-Stromal Tumor Spheroids by Multimodal Imaging: Fluorescence, Photoacoustic, and Photothermal Microscopies

Pancreatic cancer is one of the most complex types of cancers to detect, diagnose, and treat. However, the field of nanomedicine has strong potential to address such challenges. When evaluating the diffusion and penetration of theranostic nanoparticles, the extracellular matrix (ECM) is of crucial importance because it acts as a barrier to the tumor microenvironment. In the present study, the penetration of functionalized, fluorescent gold nanorods into large (>500 μm) multicellular 3D tissue spheroids was studied using a multimodal imaging approach. The spheroids were generated by co-culturing pancreatic cancer cells and pancreatic stellate cells in multiple ratios to mimic variable tumor-stromal compositions and to investigate nanoparticle penetration. Fluorescence live imaging, photothermal, and photoacoustic analysis were utilized to examine nanoparticle behavior in the spheroids. Uniquely, the nanorods are intrinsically photoacoustic and photothermal, enabling multi-imaging detection even when fluorescence tracking is not possible or ideal.

Stimuli-responsive DOX release behavior of cross-linked poly(acrylic acid) nanoparticles

Cross-linked poly(acrylic acid) nanoparticles were synthesized via distillation precipitation polymerization of acrylic acid and ethylene glycol dimethacrylate withdifferent molar ratios. Spherical nanoparticles with diameters between 75 and 122 nm were synthesized and exhibited temperature and pH-responsive behaviors. However, this behavior was less pronounced for samples with higher cross-linking degrees. The potential of all nanoparticles as carriers for controlled release of doxorubicin (DOX) anti-cancer drug was examined at pH values of 1.2, 5.3 and 7.4. An obvious alleviation in burst release behavior and the amount of cumulative drug release was seen for all nanoparticles as the pH of the medium and the cross-linking degree of nanoparticle increased. Also kinetics of drug release was studied using mathematical models of zero-order, first-order, Higuchi, Korsmeyer-Peppas and Hixson-Crowell, where Higuchi and Korsmeyer-Peppas models best defined the kinetics of drug release.

Development of Multifunctional Avermectin Poly(succinimide) Nanoparticles to Improve Bioactivity and Transportation in Rice

Avermectin (AVM) as a nonsystemic pesticide possesses a low effective utilization rate. Studies of the multifunctional pesticide delivery system for improving biological activity are developing prosperously. In this study, multifunctional avermectin/polysuccinimide with glycine methyl ester nanoparticles (AVM-PGA) were prepared by the self-assembly process. The AVM loading capacity was up to 23.7%. After 24 h of UV irradiation, there was still about 70% of AVM remaining in PGA₄₂ nanocarriers, as opposed to less than 5% of the free-form AVM. The rising ambient pH promoted the release of AVM using an in vitro releasing test, revealing a favorable pH-responsively controlled-release property. The mortality rate of Plutella xylostella with 2.5 μg/mL of AVM content of AVM-PGA₄₂ was 96.3% after 48 h, while that of free AVM was only 51.5%. In addition, the AVM could be detected in stems and all leaves treated with AVM-PGA₄₂ nanoparticles, whereas rare AVM was detected only in treated leaves for the free-form AVM, which achieved the transportation of nanocarriers carrying AVM in rice for the first time. Furthermore, the PGA nanoparticles performed a good growth promoting effect on rice. These results show that the AVM-PGA₄₂ nanopesticides have a great potential application prospect to control the pest and improve the drug utilization efficiency on agriculture.

Advances in redox-responsive drug delivery systems of tumor microenvironment

With the improvement of nanotechnology and nanomaterials, redox-responsive delivery systems have been studied extensively in some critical areas, especially in the field of biomedicine. The system constructed by redox-responsive delivery can be much stable when in circulation. In addition, redox-responsive vectors can respond to the high intracellular level of glutathione and release the loaded cargoes rapidly, only if they reach the site of tumor tissue or targeted cells. Moreover, redox-responsive delivery systems are often applied to significantly improve drug concentrations in targeted cells, increase the therapeutic efficiency and reduce side effects or toxicity of primary drugs. In this review, we focused on the structures and types of current redox-responsive delivery systems and provided a comprehensive overview of relevant researches, in which the disulfide bond containing delivery systems are of the utmost discussion.

Self-assembly of peptide amphiphiles for drug delivery: the role of peptide primary and secondary structures

Peptide amphiphiles (PAs), functionalized with alkyl chains, are capable of self-assembling into various nanostructures. Recently, PAs have been considered as ideal drug carriers due to their good biocompatibility, specific biological functions, and hypotoxicity to normal cells and tissues. Meanwhile, the nanocarriers formed by PAs are able to achieve controlled drug release and enhanced cell uptake in response to the stimulus of the physiological environment or specific biological factors in the location of the lesion. However, the underlying detailed drug delivery mechanism, especially from the aspect of primary and secondary structures of PAs, has not been systematically summarized or discussed. Focusing on the relationship between the primary and secondary structures of PAs and stimuli-responsive drug delivery applications, this review highlights the recent advances, challenges, and opportunities of PA-based functional drug nanocarriers, and their potential pharmaceutical applications are discussed.

Surface sulfonamide modification of poly(N-isopropylacrylamide)-based block copolymer micelles to alter pH and temperature responsive properties for controlled intracellular uptake

Two different surface sulfonamide-functionalized poly(N-isopropylacrylamide)-based polymeric micelles were designed as pH-/temperature-responsive vehicles. Both sulfadimethoxine- and sulfamethazine-surface functionalized micelles were characterized to determine physicochemical properties, hydrodynamic diameters, zeta potentials, temperature-dependent size changes, and lower critical solution temperatures (LCST) in both pH 7.4 and 6.8 solutions (simulating both physiological and mild low pH conditions), and tested in the incorporation of a proof-of-concept hydrophobic antiproliferative drug, paclitaxel. Cellular uptake studies were conducted using bovine carotid endothelial cells and fluorescently labeled micelles to evaluate if there was enhanced cellular uptake of the micelles in a low pH environment. Both variations of micelles showed enhanced intracellular uptake under mildly acidic (pH 6.8) conditions at temperatures slightly above their LCST and minimal uptake at physiological (pH 7.4) conditions. Due to the less negative zeta potential of the sulfamethazine-surface micelles compared to sulfadimethoxine-surface micelles, and the proximity of their LCST to physiological temperature (37°C), the sulfamethazine variation was deemed more amenable for clinically relevant temperature and pH-stimulated applications. Nevertheless, we believe both polymeric micelle variations have the capacity to be implemented as an intracellular drug or gene delivery system in response to mildly acidic conditions. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1552-1560, 2018.

Stimuli-Responsive Polymeric Nanoparticles

There is increasing evidence that stimuli-responsive nanomaterials have become significantly critical components of modern materials design and technological developments. Recent advances in synthesis and fabrication of stimuli-responsive polymeric nanoparticles with built-in stimuli-responsive components (Part A) and surface modifications of functional nanoparticles that facilitate responsiveness (Part B) are outlined here. The synthesis and construction of stimuli-responsive spherical, core-shell, concentric, hollow, Janus, gibbous/inverse gibbous, and cocklebur morphologies are discussed in Part A, with the focus on shape, color, or size changes resulting from external stimuli. Although inorganic/metallic nanoparticles exhibit many useful properties, including thermal or electrical conductivity, catalytic activity, or magnetic properties, their assemblies and formation of higher order constructs are often enhanced by surface modifications. Section B focuses on selected surface reactions that lead to responsiveness achieved by decorating nanoparticles with stimuli-responsive polymers. Although grafting-to and grafting-from dominate these synthetic efforts, there are opportunities for developing novel synthetic approaches facilitating controllable recognition, signaling, or sequential responses. Many nanotechnologies utilize a combination of organic and inorganic phases to produce ceramic or metallic nanoparticles. One can envision the development of new properties by combining inorganic (metals, metal oxides) and organic (polymer) phases into one nanoparticle designated as "ceramers" (inorganics) and "metamers" (metallic).

Mediating physicochemical properties and paclitaxel release of pH-responsive H-type multiblock copolymer self-assembly nanomicelles through epoxidation

We focused on modulation of the physicochemical and biomedical properties of copolymer nanomicellesviaepoxidation, which provided significant improvements.

A shell-crosslinked polymeric micelle system for pH/redox dual stimuli-triggered DOX on-demand release and enhanced antitumor activity

Based on targeted amphiphilic block copolymer N-acetyl glucosamine-poly (styrene-alt-maleic anhydride)₅₈-b-polystyrene₁₃₀ (NAG-P(St-alt-MA)₅₈-b-PSt₁₃₀), a pH/redox dual-triggered shell-crosslinked polymeric micelle system was constructed. The shell-crosslinked micelles (CLM) were prepared by post-crosslinking method to regulate drug release kinetics using cystamine as linkers between carboxy groups of the shell. Compared with non-crosslinked micelles (NCLM), CLM showed spherical shapes with little increased mean diameter of 102.40±0.54nm, low polydispersity index (PDI) of 0.19±0.36, enlarged zeta potential value from -41.46±0.99 to -9.31±0.50mV, indicating the successful modification of disulfide bonds in shell. In vitro drug release study clearly exhibited a pH and redox dual-sensitive drug release profile with significantly accelerated drug release under pH 5.0 and 10mM GSH conditions (46.84% in 96h) without burst release. Both CLM and NCLM showed quite different release profiles between physiological (pH 7.4) and tumoral microenvironment (pH 5.0), effectively avoiding the premature drug leakage and realizing on-demand drug release. The MTT assay implied that CLM presented a time- and concentration-dependent manner to inhibit proliferation of A549 and MCF-7 cells and much lower IC₅₀ values in comparison with that of NCLM after 72h incubation. Both FCM and CLSM results showed that CLM displayed much higher cellular uptake efficiency and anti-tumor activities than NCLM and free DOX. CLM and NCLM could be internalized by energy-dependent endocytosis mechanism due to similar surface properties. Overall, this dual-stimuli triggered micelle system provided a promising tumor-responsive platform for cancer therapy.