Colorimetric detection of riboflavin by silver nanoparticles capped with β-cyclodextrin-grafted citrate

A metal-complex based chemosensor for the detection of riboflavin and folate

The vitamins of riboflavin and folate are necessary nutrients for maintaining the proper functioning of human body. Riboflavin and folate deficiency will cause nerve damage, leading to peripheral neuritis, depression, tongue inflammation and other diseases. The sensitive detection of riboflavin and folate keeps its significance for patients and food quality control. In this study, a quinoline-pyridine-combined chemosensor (HQ-TPE) modified by tetraphenylethene was developed. After chelating Cd2+, the chemosensor exhibited high selectivity and sensitivity for riboflavin and folate. Moreover, it can discriminate the two different vitamins through different fluorescent responses, which should arise from the different intermolecular π-π interactions between the sensor HQ-TPE and the analyte upon coordination of riboflavin or folate with Cd2+. More importantly, the chemosensor could be used in visual semi-quantitative determination of riboflavin and folate in real samples (milk and lettuce). Therefore, the sensor presented here will not only be a powerful tool for the detection of riboflavin and folate, but also provides a new template for the design of metal complex as fluorescent sensor.

Simultaneous fluorescence sensing of vitamin B2 and sulfur ions based on fluorescent copper nanoparticles

In this study, the F-CuNPs were synthesized by a modified liquid-phase chemical reduction method. Throughout the preparation process, anhydrous copper sulfate was used as the copper source, and ascorbic acid in the NaOH solution served as the reducing and protective agent. Förster resonance energy transfer (FRET) may exist between F-CuNPs and vitamin B2 due to the large spectral overlap between the fluorescence emission spectra of F-CuNPs and the UV-vis absorption spectra of vitamin B2. Therefore, the detection of vitamin B2 was designed based on a FRET system between F-CuNPs and vitamin B2. With S^2- into the F-CuNPs&VB2 system, the fluorescence intensity of vitamin B2 was quenched, while the fluorescence intensity of F-CuNPs was almost unchanged. There may be a specific reaction between S^2- and vitamin B2. Therefore, the research system can be further used to detect S^2- based on ratiometric fluorescent probe. The research findings show that the linear range of vitamin B2 was 0.51 nM-34.64 nM with a detection limit of 0.25 nM (S/N = 3), the linear range of S^2- was 0.64 μM-60.00 μM with a detection limit of 0.32 μM (S/N = 3). Furthermore, the simultaneous fluorescent sensing system has high sensitivity and selectivity. Therefore, this system was designed and successfully used to detect the content of vitamin B2 and S^2- in actual samples to find a new effective method to detect analytes.

Silicon Nanoparticle-Based Ratiometric Fluorescence Probes for Highly Sensitive and Visual Detection of VB2

In this work, blue fluorescent silicon nanoparticles (SiNPs) were prepared by a simple one-step hydrothermal method using (3-aminopropyl) triethoxy silane (APTES) and eriochrome black T as raw materials. The SiNPs showed favorable water solubility, thermal stability, pH stability, salt tolerance, and photobleaching resistance. At an excitation wavelength of 376 nm, the SiNPs emitted bright blue fluorescence at 460 nm. In the presence of vitamin B₂ (VB₂), the fluorescence intensity (FL intensity) of the SiNPs at 460 nm decreased obviously, and a new peak appeared at 521 nm. Based on this, a novel ratiometric fluorescence method was established for VB₂ detection. There was a good linear relationship between the fluorescence intensity ratio (F ₅₂₁/F ₄₆₀) and VB₂ concentration from 0.5 to 60 μM with a detection limit of 135 nM. This method was successfully applied to detect VB₂ content in the samples of vitamin B₂ drugs and beverages. Additionally, a simple paper sensor based on the SiNPs was designed to visualize detection of VB₂. With the support of color recognition software on a smartphone, the visual quantitative analysis of VB₂ was realized, ranging from 40 to 800 μM.

Transition metal composites for selective analysis of vitamin B2 in rice by ultrahigh-performance liquid chromatography-tandem mass spectrometry

A novel amino-functionalized zinc ferrite nanoparticles/MXene (ZnFe₂O₄-NH₂/MXene composite which consist of ZnFe₂O₄-NH₂ and single/few layers MXene was designed and synthesized as an efficient extractant for analysis of vitamin B₂ in rice first combined with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). As a result, the single/few layer MXene was tightly attached to the spherical ZnFe₂O₄-NH₂ nanoparticles by electrostatic self-assembly interaction, which present large specific surface area and fast mass transfer rate. The relevant experimental parameters, including the pH of the solution, extraction time, adsorbent amount, desorption solvent, desorption solvent volume and desorption time were investigated and optimized. Under optimum conditions, the ZnFe₂O₄-NH₂/MXene composite exhibited excellent selectivity and adsorption capacity for vitamin B₂ through hydrogen bonding interactions and the metal-π complexation interaction. The adsorption kinetics, isotherms, and thermodynamic studies were systemically investigated to evaluate the adsorption mechanism and characteristics, which ascribed to chemical adsorption, monolayer adsorption and a spontaneous endothermic process. Furthermore, the performance of the proved method was validated with the good linear correlation coefficient (r = 0.999), low limit of detection (0.86 ng·mL^-1) and the limit of quantification (2.98 ng·mL^-1), satisfactory recoveries (81.7-102.5%) and reasonable accuracy (RSD<7.8%). The theoretical and technological underpinning for investigating the kinship amongst vitamin alterations and the degree of rice storage was set using this suggested approach to assess vitamin B₂ in rice from various years.

Plasmonic nanogels for naked-eye sensing of food adulterants

Cellulose based nanoplasmonic sensors gained immense attention for various applications due to their advantageous physicochemical characteristics such as ease of fabrication, low density, chirality, surface functionalization and disposal. Herein, a hydrogel based nanoplasmonic sensor probe was fabricated and evaluated for the detection of melamine (MA). Plasmonic nanomaterials (AuNPs) were synthesized by the redox reaction using a dual reducing agent (β-cyclodextrin (βCD) and citrate). The physicochemical characteristics of the synthesized AuNPs were extensively determined by various spectroscopic and microscopic techniques. The colorimetric sensing of melamine (MA) was carried out in solution and hydrogel phases. Upon the addition of MA, AuNPs tend to aggregate and exhibit color changes from orange-red to purple due to surface plasmon resonance (SPR) coupling. This nanosensor probe showed high selectivity and sensitivity for detection of MA with a detection limit of 3 × 10^-7 M. Plasmonic hydrogels were prepared using the cellulose acetate (CA) polymer and optimized for stability and interaction with melamine. The βCD-citrate stabilized AuNPs showed color changes with the CA hydrogels. The hydrogel-based sensor probe exhibits similar characteristics with respect to the selective and sensitive detection of MA under optimized conditions. The fabricated nanoreactor based sensor probe has high potential for food sensor applications.

Characteristics of Mussels-Derived Carbon Dots and Their Applications in Bio-Imaging and Detection of Riboflavin

A simple and green strategy has been demonstrated for the synthesis of carbon dots (CDs) from mussels. The chemical structure and optical properties of mussels-derived CDs prepared at different reaction temperatures (140, 160, and 180 °C) were evaluated. The average size of synthesized fluorescent CDs decreased from 2.06 to 1.30 nm as reaction temperatures increased from 140 to 180 °C. The fluorescence quantum yield of CDs could reach up to 15.20%. The surface of CDs was rich in functional groups such as -OH, -NH₂, and -COOH, providing CDs with good water solubility and biocompatibility. Furthermore, the mussel-derived CDs have been successfully applied in bio-imaging for onion endothelium cells, HepG2 cells, and zebrafish. In addition, CDs could be employed as a biosensor for riboflavin detection. Therefore, mussels are a promising carbon resource for preparing N-doped CDs for bio-imaging and monitoring riboflavin.

How Adding Chlorhexidine or Metallic Nanoparticles Affects the Antimicrobial Performance of Calcium Hydroxide Paste as an Intracanal Medication: An In Vitro Study

The aim of our study was to explore the potential value of metallic (Ag, Cu, and Zn) salts, polymer/metallic nanoparticles, and chlorhexidine (CHX) for improving the antimicrobial activity of calcium hydroxide (CH) against E. faecalis and C. albicans, associated with persistent endodontic infections. A first screening was performed by determining minimum inhibitory/bactericidal concentrations (MIC/MBC). Antimicrobial activity of the CH paste mixed with metallic salts, chitosan or cyclodextrin polymer metallic nanoparticles was compared to the antimicrobial activity of CH paste alone and CH + CHX using a time-kill kinetics assay. The effect of the antimicrobials on the rheological and the key mechanical properties were also examined. Copper and zinc were discarded because of their MIC/MBC values and silver because of its kill time curve profile. Except for a slower setting time after 24 h and a higher weight loss after 1 week of incubation, the mechanical behavior of the CH paste was unaffected by the addition of CHX. Polymeric/metallic nanoparticles failed to potentiate the antimicrobial effect of CH. By contrast, CHX increased this effect and thus could help eradicate E. faecalis associated with persistent root canal infections without altering the desired key physical properties of the CH paste.

Optimizing the Efficiency of a Cytocompatible Carbon-Dots-Based FRET Platform and Its Application as a Riboflavin Sensor in Beverages

In this work, the Förster resonance energy transfer (FRET) between carbon dots (CDs) as energy donors and riboflavin (RF) as an energy acceptor was optimized and the main parameters that characterize the FRET process were determined. The results were successfully applied in the development of an ultrasensitive ratiometric fluorescent sensor for the selective and sensitive determination of RF in different beverages. Water-soluble CDs with a high quantum yield (54%) were synthesized by a facile and direct microwave-assisted technique. The CDs were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), Zeta potential, and UV-visible and molecular fluorescence spectroscopy. The study of the FRET process at two donor concentrations showed that the energy transfer efficiency decreases as the donor concentration increases, confirming its dependence on the acceptor:donor ratio in nanoparticle-based systems. The results show the importance of optimizing the FRET process conditions to improve the corresponding output signal. The variation in the ratiometric signal with the concentration of RF showed linearity in a concentration range of 0 to 11 µM with R² = 0.9973 and a detection limit of 0.025 µM. The developed nanosensor showed good selectivity over other possible types of interference. The sensor was then applied for the determination of RF in beverage samples using the standard addition method with recoveries between 96% and 106%. Preliminary cytocompatibility tests carried out with breast cancer cells (MDA-MB-231) revealed the nanosensor to be cytocompatible in its working concentration regime, even after long incubation times with cells. Altogether, the developed RF determination method was found to be fast, low-cost, highly sensitive, and selective and can be extended to other samples of interest in the biological and food sectors. Moreover, thanks to its long-lasting cytocompatibility, the developed platform can also be envisaged for other applications of biological interest, such as intracellular sensing and staining for live cell microscopy.

Carbon Nanodots as a Multifunctional Fluorescent Sensing Platform for Ratiometric Determination of Vitamin B2 and "Turn-Off" Detection of pH

In this work, we synthesized carbon nanodots (CNDs) by a one-pot hydrothermal method to carbonize precursors of dry carnation petals and polyethylenimine. The obtained CNDs possess favorable photostability, good biocompatibility, and excellent water solubility, which can serve as a dual-responsive nanosensor for the determination of vitamin B₂ (VB₂) and pH. A unique ratiometric fluorescence resonance energy transfer probe was developed through a strong interaction between VB₂ and surface moieties of CNDs. CNDs emitted at 470 nm; however, in the presence of VB₂, an enhanced emission peak was clearly observed at 532 nm. The value of I₅₃₂/I₄₇₀ exhibits a stable response to the VB₂ concentration from 0.35 to 35.9 μM with a detection limit of 37.2 nM, which has been used for VB₂ detection in food and medicine samples and ratiometric imaging of VB₂ in living cells with satisfying performance. In addition, the proposed CNDs also displayed pH-sensitive behavior and can be a turn-off fluorescent sensor to monitor pH. The fluorescent intensity at 470 nm is a good linear response against pH values from 3.6 to 8, affording the capability as a single-emissive nanoprobe for intracellular pH sensing.

A ratiometric fluorescent sensor based on g-CNQDs@Zn-MOF for the sensitive detection of riboflavin via FRET

A novel ratiometric fluorescent sensor based on Förster resonance energy transfer (FRET) platform was designed for riboflavin (RF) detection. The graphitic carbon nitrides quantum dots - Zn-MOF composite (g-CNQDs@Zn-MOF) was used as the fluorescent probe. In the FRET system, g-CNQDs@Zn-MOF and RF acted as donor and acceptor, respectively. The probe exhibited high sensitivity and good selectivity to RF, and had been successfully used for the detection of RF in milk and vitamin B₂ tablets. The detection limit of the sensor was 15 nM. The strategy expanded the application of MOF in sensing filed and provided a new method for the detection of RF.

Ratiometric fluorescence detection of riboflavin based on fluorescence resonance energy transfer from nitrogen and phosphorus co-doped carbon dots to riboflavin

Fluorescent nitrogen and phosphorus co-doped carbon dots (NPCDs) were prepared via a hydrothermal method with citric acid and O-phosphorylethanolamine as precursors. The overlap between the absorption spectrum of riboflavin and the fluorescence emission spectrum of the NPCDs and the relative proximity of the NPCDs to riboflavin due to hydrogen bonding facilitated the formation of a NPCDs/riboflavin fluorescence resonance energy transfer (FRET) system. Thus, a ratiometric fluorescence method for the detection of riboflavin based on the formation of this NPCDs/riboflavin FRET system was developed. The method displayed a sensitive and selective response to riboflavin in the range 0.5-50 μmol/L with a detection limit of 0.17 μmol/L. It was also found to be suitable for the detection of riboflavin in milk and riboflavin pharmaceutical tablets. Graphical abstract Illustration of the preparation of NPCDs and the ratiometric fluorescence detection of riboflavin using the NPCDs/riboflavin FRET system.

In vitro evaluation of drug release and antibacterial activity of a silver-loaded wound dressing coated with a multilayer system

The goal of the study was to elaborate an antibacterial silver wound dressing covered by a protective coating that would prevent silver diffusion toward skin without losing its biocide properties. Therefore, non woven polyethyleneterephtalate (PET) textiles were pre-treated by two types of polysaccharides - chitosan and cyclodextrin - both crosslinked with citric acid by a pad/dry/cure process. Both types of resulting thermofixed textiles carrying the citrate crosslinks were then impregnated in silver solution followed by a thermal treatment and were finally coated by Layer-by-Layer (L-b-L) deposition of a polyelectrolyte multilayer (PEM) film consisting of anionic water-soluble poly-cyclodextrin and cationic chitosan. The influence of the process parameters was investigated in terms of silver adsorption capacity, PEM system build-up, silver kinetics of release and antibacterial activity. We demonstrate i) the utility of the intermediate thermal treatment step in the reduction of silver leakage in the polyelectrolyte solutions used in the L-b-L process, ii) that silver adsorption on the preliminary thermofixed layers did not affect the PEM system build-up, iii) the slowing down of silver release kinetic thanks to the PEM coating, iv) the preservation of the antibacterial activity despite the PEM coating.

A polymyxin B-silver nanoparticle colloidal system and the application of lipopolysaccharide analysis

Polymyxin B (PMB) is a small cyclic polycationic lipopeptide, which can be used as an antibiotic drug against Gram-negative bacteria. In this work, the interaction between citrate capped silver nanoparticles (AgNPs) and PMB is studied. Experimental results show that the association constant is extremely high and the binding event leads to a significant variation in the localized surface plasmon resonance (LSPR) of AgNPs. Moreover, the PMB-AgNP colloidal system can be further exploited as a sensitive analytical platform. Taking lipopolysaccharide (LPS) as an example, we demonstrate a facile colorimetric LPS detection method. LPS is a major constituent of the Gram-negative bacterial cell wall which is used as an optimal biomarker for some diseases like urinary tract infections and sepsis. In this study, target LPS is able to tightly bind to PMB, which effectively inhibits the PMB induced aggregation of AgNPs. By monitoring the UV-vis absorption spectra, the LPS concentration can be quantitatively determined with high sensitivity. The sensing strategy is quite simple, which allows effortless diagnosis of many diseases at different stages.

Chemistry and engineering of cyclodextrins for molecular imaging

Cyclodextrins (CDs) are naturally occurring cyclic oligosaccharides bearing a basket-shaped topology with an "inner-outer" amphiphilic character. The abundance of hydroxyl groups enables CDs to be functionalized with multiple targeting ligands and imaging elements. The imaging time, and the payload of different imaging elements, can be tuned by taking advantage of the commercial availability of CDs with different sizes of the cavity. This review aims to offer an outlook of the chemistry and engineering of CDs for the development of molecular probes. Complexation thermodynamics of CDs, and the corresponding implications for probe design, are also presented with examples demonstrating the structural and physiochemical roles played by CDs in the full ambit of molecular imaging. We hope that this review not only offers a synopsis of the current development of CD-based molecular probes, but can also facilitate translation of the incremental advancements from the laboratory to real biomedical applications by illuminating opportunities and challenges for future research.