Incorporation of antimicrobial peptides in nanostructured lipid membrane mimetic bilayer cubosomes

Preparation and characterization of macrophage membrane camouflaged cubosomes as a stabilized and immune evasive biomimetic nano-DDS

This study aims to develop a biomimetic nano-drug delivery system (nano-DDS) by employing a macrophage cell membrane camouflaging strategy to modify lyotropic liquid crystal nanoparticles (LLC-NPs). The cubic-structured LLC-NPs (Cubosomes, CBs) were prepared via a top-down approach (ultra-sonification) using monoolein (MO) and doped with the cationic lipid, DOTAP. The cell membrane camouflaging procedure induced changes in the cubic lipid phase from primitive cubic phase (QIIP) to a coexistence of QIIP and diamond cubic phase (QIID). The macrophage membrane camouflaging strategy protected CB cores from the destabilization by blood plasma and enhanced the stability of CBs. The in vitro experiment results revealed that the macrophage cell membrane coating significantly reduced macrophage uptake efficacy within 8 h of incubation compared to the non-camouflaged CBs, while it had minimal impact on cancer cell uptake efficacy. The macrophage membrane coated CBs showed lower accumulation in the heart, kidney and lungs in vivo. This study demonstrated the feasibility of employing cell membrane camouflaging on CBs and confirmed that the bio-functionalities of the CBs-based biomimetic nano-DDS were retained from the membrane source cells, and opened up promising possibilities for developing an efficient and safe drug delivery system based on the biomimetic approach.

A systematic study of the effect of lipid architecture on cytotoxicity and cellular uptake of cationic cubosomes

HYPOTHESIS

Lipid nanoparticles containing a cationic lipid are increasingly used in drug and gene delivery as they can display improved cellular uptake, enhanced loading for anionic cargo such as siRNA and mRNA or exhibit additional functionality such as cytotoxicity against cancer cells. This research study tests the hypothesis that the molecular structure of the cationic lipid influences the structure of the lipid nanoparticle, the cellular uptake, and the resultant cytotoxicity.

EXPERIMENTS

Three potentially cytotoxic cationic lipids, with systematic variations to the hydrophobic moiety, were designed and synthesised. All the three cationic lipids synthesised contain pharmacophores such as the bicyclic coumarin group (CCA12), the tricyclic etodolac moiety (ETD12), or the large pentacyclic triterpenoid "ursolic" group (U12) conjugated to a quaternary ammonium cationic lipid containing twin C12 chains. The cationic lipids were doped into monoolein cubosomes at a range of concentrations from 0.1 mol% to 5 mol% and the effect of the lipid molecular architecture on the cubosome phase behaviour was assessed using a combination of Small Angle X-Ray Scattering (SAXS), Dynamic Light Scattering (DLS), zeta-potential and cryo-Transmission Electron Microscopy (Cryo-TEM). The resulting cytotoxicity of these particles against a range of cancerous and non-cancerous cell-lines was assessed, along with their cellular uptake.

FINDINGS

The molecular architecture of the cationic lipid was linked to the internal nanostructure of the resulting cationic cubosomes with a transition to more curved cubic and hexagonal phases generally observed. Cubosomes formed from the cationic lipid CCA12 were found to have improved cellular uptake and significantly higher cytotoxicity than the cationic lipids ETD12 and U12 against the gastric cancer cell-line (AGS) at lipid concentrations ≥ 75 µg/mL. CCA12 cationic cubosomes also displayed reasonable cytotoxicity against the prostate cancer PC-3 cell-line at lipid concentrations ≥ 100 µg/mL. In contrast, 2.5 mol% ETD12 and 2.5 mol% U12 cubosomes were generally non-toxic against both cancerous and non-cancerous cell lines over the entire concentration range tested. The molecular architecture of the cationic lipid was found to influence the cubosome phase behaviour, the cellular uptake and the toxicity although further studies are necessary to determine the exact relationship between structure and cellular uptake across a range of cell lines.

Small-angle X-ray and neutron scattering applied to lipid-based nanoparticles: Recent advancements across different length scales

Lipid-based nanoparticles (LNPs), ranging from nanovesicles to non-lamellar assemblies, have gained significant attention in recent years, as versatile carriers for delivering drugs, vaccines, and nutrients. Small-angle scattering methods, employing X-rays (SAXS) or neutrons (SANS), represent unique tools to unveil structure, dynamics, and interactions of such particles on different length scales, spanning from the nano to the molecular scale. This review explores the state-of-the-art on scattering methods applied to unveil the structure of lipid-based nanoparticles and their interactions with drugs and bioactive molecules, to inform their rational design and formulation for medical applications. We will focus on complementary information accessible with X-rays or neutrons, ranging from insights on the structure and colloidal processes at a nanoscale level (SAXS) to details on the lipid organization and molecular interactions of LNPs (SANS). In addition, we will review new opportunities offered by Time-resolved (TR)-SAXS and -SANS for the investigation of dynamic processes involving LNPs. These span from real-time monitoring of LNPs structural evolution in response to endogenous or external stimuli (TR-SANS), to the investigation of the kinetics of lipid diffusion and exchange upon interaction with biomolecules (TR-SANS). Finally, we will spotlight novel combinations of SAXS and SANS with complementary on-line techniques, recently enabled at Large Scale Facilities for X-rays and neutrons. This emerging technology enables synchronized multi-method investigation, offering exciting opportunities for the simultaneous characterization of the structure and chemical or mechanical properties of LNPs.

Engineering aspects of lipid-based delivery systems: In vivo gene delivery, safety criteria, and translation strategies

Defects in the genome cause genetic diseases and can be treated with gene therapy. Due to the limitations encountered in gene delivery, lipid-based supramolecular colloidal materials have emerged as promising gene carrier systems. In their non-functionalized form, lipid nanoparticles often demonstrate lower transgene expression efficiency, leading to suboptimal therapeutic outcomes, specifically through reduced percentages of cells expressing the transgene. Due to chemically active substituents, the engineering of delivery systems for genetic drugs with specific chemical ligands steps forward as an innovative strategy to tackle the drawbacks and enhance their therapeutic efficacy. Despite intense investigations into functionalization strategies, the clinical outcome of such therapies still needs to be improved. Here, we highlight and comprehensively review engineering aspects for functionalizing lipid-based delivery systems and their therapeutic efficacy for developing novel genetic cargoes to provide a full snapshot of the translation from the bench to the clinics. We outline existing challenges in the delivery and internalization processes and narrate recent advances in the functionalization of lipid-based delivery systems for nucleic acids to enhance their therapeutic efficacy and safety. Moreover, we address clinical trials using these vectors to expand their clinical use and principal safety concerns.

Overcoming Therapeutic Challenges of Antibiotic Delivery with Cubosome Lipid Nanocarriers

Low discovery rates for new antibiotics, commercial disincentives to invest, and inappropriate use of existing drugs have created a perfect storm of antimicrobial resistance (AMR). This "silent pandemic" of AMR looms as an immense, global threat to human health. In tandem, many potential novel drug candidates are not progressed due to elevated hydrophobicity, which may result in poor intracellular internalization and undesirable serum protein binding. With a reducing arsenal of effective antibiotics, enabling technology platforms that improve the outcome of treatments, such as repurposing existing bioactive agents, is a prospective option. Nanocarrier (NC) mediated drug delivery is one avenue for amplifying the therapeutic outcome. Here, the performance of several antibiotic classes encapsulated within the lipid-based cubosomes is examined. The findings demonstrate that encapsulation affords significant improvements in drug concentration:inhibition outcomes and assists in other therapeutic challenges associated with internalization, enzyme degradation, and protein binding. We emphasize that a currently sidelined compound, novobiocin, became active and revealed a significant increase in inhibition against the pathogenic Gram-negative strain, Pseudomonas aeruginosa. Encapsulation affords co-delivery of multiple bioactives as a strategy for mitigating failure of monotherapies and tackling resistance. The rationale in optimized drug selection and nanocarrier choice is examined by transport modeling which agrees with experimental inhibition results. The results demonstrate that lipid nanocarrier encapsulation may alleviate a range of challenges faced by antibiotic therapies and increase the range of antibiotics available to treat bacterial infections.

Biocompatible formulation of a hydrophobic antimicrobial peptide L30 through nanotechnology principles and its potential role in mouse pneumonia model infected with Staphylococcus aureus

Hydrophobic antimicrobial peptide L30, a potential antibiotic candidate, has poor water solubility and hemolytic activity. Herein, a biocompatible nano-formulation composed of liposomes and dendritic mesoporous silica encapsulation (LDMSNs@L30) was constructed for L30 to solve the limits for its clinical development. The characterization, antimicrobial activity and therapeutic effect of LDMSNs@L30 on Staphylococcus aureus 9 (cfr+) infected mice models were investigated. LDMSNs@L30 displayed a smooth, spherical, and monodisperse nanoparticle with a hydrodynamic diameter of 177.40 nm, an encapsulation rate of 56.13%, a loading efficiency of 32.26%, a release rate of 66.5%, and effective slow-release of L30. Compared with free L30, the formulation could significantly increase the solubility of L30 in PBS with the maximum concentration from 8 μg/mL to 2.25 mg/mL and decrease the hemolytic activity of hydrophobic peptide L30 with the HC5 from 65.36 μg/mL to more than 500 μg/mL. The nano delivery system LDMSNs@L30 also exhibited higher therapeutic effects on mice models infected with S. aureus 9 (cfr+) than those of free L30 after 7 days of treatment by reducing the lung inflammation and the inflammatory cytokines levels in plasma, showing better health score and pulmonary pathological improvement. Our research suggests that nano-formulation can be expected to be a promising strategy for peptide drugs in therapeutic applications.

Block Copolymer Self-Assembly Directed Synthesis of Porous Materials with Ordered Bicontinuous Structures and Their Potential Applications

Porous materials with their ordered bicontinuous structures have attracted great interest owing to ordered periodic structures as well as 3D interconnected network and pore channels. Bicontinuous structures may favor efficient mass diffusion to the interior of materials, thus increasing the utilization ratio of active sites. In addition, ordered bicontinuous structures confer materials with exceptional optical and magnetic properties, including tunable photonic bandgap, negative refraction, and multiple equivalent magnetization configurations. The attractive structural advantages and physical properties have inspired people to develop strategies for preparing bicontinuous-structured porous materials. Among a few synthetic approaches, the self-assembly of block copolymers represents a versatile strategy to prepare various bicontinuous-structured functional materials with pore sizes and lattice parameters ranging from 1 to 500 nm. This article overviews progress in this appealing area, with an emphasis on the synthetic strategies, the structural control (including topologies, pore sizes, and unit cell parameters), and their potential applications in energy storage and conversion, metamaterials, photonic crystals, cargo delivery and release, nanoreactors, and biomolecule selection.

Nanoparticles in association with antimicrobial peptides (NanoAMPs) as a promising combination for agriculture development

Antimicrobial peptides are small molecules, up to 10 kDa, present in all kingdoms of life, including in plants. Several studies report that these molecules have a broad spectrum of activity, including antibacterial, antifungal, antiviral, and insecticidal activity. Thus, they can be employed in agriculture as alternative tools for phytopathogen and pest control. However, the application of peptides in agriculture can present challenges, such as loss of activity due to degradation of these molecules, off-target effects, and others. In this context, nanotechnology can offer versatile structures, including metallic nanoparticles, liposomes, polymeric nanoparticles, nanofibers, and others, which might act both in protection and in release of AMPs. Several polymers and biomaterials can be employed for the development of nanostructures, such as inorganic metals, natural or synthetic lipids, synthetic and hybrid polymers, and others. This review addresses the versatility of NanoAMPs (Nanoparticles in association with antimicrobial peptides), and their potential applications in agribusiness, as an alternative for the control of phytopathogens in crops.

Targeting foodborne pathogens via surface-functionalized nano-antimicrobials

The incorporation of antibiotics and bioactive compounds into non-toxic nanoparticles has been popularly used to produce effective antimicrobial nanocarriers against foodborne pathogens. These systems can protect antimicrobials against harsh environments, control their release, and increase their antimicrobial activities; however, their functions can be decreased by some major barriers. Intracellular localization of bacteria protects them from the host immune system and antimicrobial agents. Also, bacteria can cause constant infection by nestling in professional phagocytic cells. In the last years, surface functionalization of nanocarriers by passive and active modification methods has been applied for their protection against clearance from the blood, increasing both circulation time and uptake by target cells. For achieving this objective, different functional agents such as specifically targeted peptides internalize ligands, saccharide ligands, or even therapeutic molecules (e.g., antibodies or enzymes) are used. In this review, techniques for functionalizing the surface of antimicrobial-loaded nanocarriers have been described. This article offers a comprehensive review of the potential of functional nanoparticles to increase the performance of antimicrobials against foodborne pathogens through targeting delivery.

Cubosomes and Hexosomes as Novel Nanocarriers for Bioactive Compounds

Cubosomes and hexosomes are nanostructured liquid crystalline particles, known as biocompatible nanocarriers for drug delivery. In recent years, there has been good interest in using cubosomes and hexosomes for the delivery of bioactive compounds in functional foods. These systems feature thermodynamic stability, encapsulate both hydrophobic and hydrophilic substances, and have a high tolerance to environmental stresses and potential for controlled release. This review outlines the recent advances in cubosomes and hexosomes in the food industry, focusing on their structure, composition, formation mechanisms, and factors influencing phase transformation between cubosomes and hexosomes. The potential applications especially for the bioactive delivery are presented. The integration of cubosomes and hexosomes with other emerging encapsulation technologies such as surface coating, gelation, and incorporation of polymers are also discussed.

A polytherapy based approach to combat antimicrobial resistance using cubosomes

A depleted antimicrobial drug pipeline combined with an increasing prevalence of Gram-negative ‘superbugs’ has increased interest in nano therapies to treat antibiotic resistance. As cubosomes and polymyxins disrupt the outer membrane of Gram-negative bacteria via different mechanisms, we herein examine the antimicrobial activity of polymyxin-loaded cubosomes and explore an alternative strategy via the polytherapy treatment of pathogens with cubosomes in combination with polymyxin. The polytherapy treatment substantially increases antimicrobial activity compared to polymyxin B-loaded cubosomes or polymyxin and cubosomes alone. Confocal microscopy and neutron reflectometry suggest the superior polytherapy activity is achieved via a two-step process. Firstly, electrostatic interactions between polymyxin and lipid A initially destabilize the outer membrane. Subsequently, an influx of cubosomes results in further membrane disruption via a lipid exchange process. These findings demonstrate that nanoparticle-based polytherapy treatments may potentially serve as improved alternatives to the conventional use of drug-loaded lipid nanoparticles for the treatment of “superbugs”.

An increasing prevalence of Gram-negative bacteria increases the interest in nanotherapies to treat antibiotic resistance. Here, the authors examine the antimicrobial activity of polymyxin-loaded cubosomes and explore a polytherapy treatment of pathogens with cubosomes in combination with polymyxin.

Cubosomes as an emerging platform for drug delivery: a state-of-the-art review

Lipid-based drug delivery nanoparticles, including non-lamellar type, mesophasic nanostructured materials of lyotropic liquid crystals (LLCs), have been a topic of interest for researchers for their applications in encapsulation of drugs...

Uptake Dynamics of Cubosome Nanocarriers at Bacterial Surfaces and the Routes for Cargo Internalization

Antibiotic-resistant bacteria pose a significant threat to humanity. Gram-negative strains have demonstrated resistance to last resort antibiotics, partially due to their outer membrane, which hinders transport of antimicrobials into the bacterium. Nanocarrier (NC)-mediated drug delivery is one proposed strategy for combating this emerging issue. Here, the uptake of self-assembled lipid nanocarriers of cubic symmetry (cubosomes) into bacteria revealed fundamental differences in the uptake mechanism between Gram-positive and Gram-negative bacteria. For Gram-positive bacteria, the NCs adhere to the outer peptidoglycan layers and slowly internalize to the bacterium. For Gram-negative bacteria, the NCs interact in two stages, fusion with the outer lipid membrane and then diffusion through the inner wall. The self-assembled nature of the cubosomes imparts a unique ability to transfer payloads via membrane fusion. Remarkably, the fusion uptake mechanism allowed rapid NC internalization by the Gram-negative bacteria, overcoming the outer membrane responsible for their heightened resilience. Here this is demonstrated by the marked reduction in the minimal inhibition concentration required for antibiotics against a pathogenic strain of Gram-negative bacteria, Escherichia coli. These results provide mechanistic insight for the development of lipid NCs as a new tool to combat bacteria.

Antimicrobial Peptides and Their Applications in Biomedical Sector

In a report by WHO (2014), it was stated that antimicrobial resistance is an arising challenge that needs to be resolved. This resistance is a critical issue in terms of disease or infection treatment and is usually caused due to mutation, gene transfer, long-term usage or inadequate use of antimicrobials, survival of microbes after consumption of antimicrobials, and the presence of antimicrobials in agricultural feeds. One of the solutions to this problem is antimicrobial peptides (AMPs), which are ubiquitously present in the environment. These peptides are of concern due to their special mode of action against a wide spectrum of infections and health-related problems. The biomedical field has the highest need of AMPs as it possesses prominent desirable activity against HIV-1, skin cancer, breast cancer, in Behcet's disease treatment, as well as in reducing the release of inflammatory cells such as TNFα, IL-8, and IL-1β, enhancing the production of anti-inflammatory cytokines such as IL-10 and GM-CSF, and in wound healing properties. This review has highlighted all the major functions and applications of AMPs in the biomedical field and concludes the future potential of AMPs.

Delivery of antimicrobial peptides to model membranes by cubosome nanocarriers

Antimicrobial peptides (AMPs), which typically disrupt the bacterial wall prompting leakage or lysis of the cell, form a growing contingent in the arsenal against antibiotic resistant bacteria. The effectiveness of AMPs is, however, hampered by their low solubility, general chemical and physical instability, and short half-life in vivo. Lipid nanocarriers such as cubosomes are effective at encapsulating and protecting proteins while simultaneously showing promise in delivery applications. Here, the efficacy of cubosome mediated delivery of AMPs is evaluated by the in-situ surface characterization of model membranes with varying composition. The cubosomes were observed to initially fuse with the membranes, with subsequent membrane disruption observed after approximately 20 - 60 min. The time for the disruption was sensitive to the charge of the cubosome as well as the composition of the bilayer. More physiologically relevant bilayers including lipids with phospho-(1'-rac-glycerol) (PG) or phosphoethanolamine (PE) headgroups were more vulnerable than those of neat phosphocholine (PC). Notably, disruption to the bilayer occurred an order of magnitude faster for encapsulated AMP compared to free AMP.

Nanomedicine-based antimicrobial peptide delivery for bacterial infections: recent advances and future prospects

Background

Antimicrobial peptides (AMPs) have gained wide interest as viable alternatives to antibiotics owing to their potent antimicrobial effects and the low propensity of resistance development. However, their physicochemical properties (solubility, charge, hydrophobicity/hydrophilicity), stability issues (proteolytic or enzymatic degradation, aggregation, chemical degradation), and toxicities (interactions with blood components or cellular toxicities) limit their therapeutic applications.

Area covered

Nanomedicine-based therapeutic delivery is an emerging concept. The AMP loaded nanoparticles have been prepared and investigated for their antimicrobial effects. In this review, we will discuss different nanomedicine-based AMP delivery systems including metallic nanoparticles, lipid nanoparticles, polymeric nanoparticles, and their hybrid systems along with their future prospects for potent antimicrobial efficacy.

Expert opinion

Nanomedicine-based AMP delivery is a recent approach to the treatment of bacterial infections. The advantageous properties of nanoparticles including the enhancement of AMP stability, controlled release, and targetability make them suitable for the augmentation of AMP activity. Modifications in the nanomedicine-based approach are required to overcome the problems of nanoparticle instability, shorter residence time, and toxicity. Future rigorous studies for both the AMP loaded nanoparticle preparation and characterization, and detailed evaluations of their in vitro and in vivo antimicrobial effects and toxicities, are essential.

Comparison of cubosomes and liposomes for the encapsulation and delivery of curcumin

Inverse bicontinuous cubic phase nanoparticles (cubosomes) have attracted significant attention in recent years, owing to their potential use as delivery vehicles for chemically fragile or poorly soluble drugs and nutraceuticals. Herein we have investigated the use of lipid nanoparticles as a delivery vehicle for curcumin, a compound with demonstrated anti-cancer properties. Curcumin is encapsulated within cubosomes comprised of several different lipid formulations, as well as phospholipid-based liposomes. The entrapment efficiency of curcumin within cubosomes was observed to vary depending on both the nanoparticle architecture and the curcumin concentration. Fluorescence spectroscopy analysis revealed that penetration of curcumin into the hydrophobic region of the bilayer was dependent on lipid composition. Curcumin was typically associated with the polar headgroup region at low concentrations, but transferred to the lipid bilayer region at higher concentrations, particularly in phytantriol cubosomes. Each nanoparticle formulation was characterized using small angle X-ray scattering and dynamic light scattering to assess the structural stability subsequent to curcumin encapsulation. The structure of the cubosomes was generally robust to the addition of curcumin, while the liposomes displayed a large increase in particle size and PDI at higher curcumin concentrations. Finally, the cytotoxicity of each formulation was assessed against murine fibroblast (NIH3T3) and murine melanoma (B16F10) cell lines in order to investigate improvements in curcumin bioavailability following encapsulation in cubosomes, as well as assess potential anti-cancer applications. Increased cytotoxicity of the cubosome-loaded curcumin against the murine melanoma cell-line demonstrates the potential of these nanoparticles as delivery vehicles for curcumin and other poorly water-soluble drugs.

Membrane Protein Structures in Lipid Bilayers; Small-Angle Neutron Scattering With Contrast-Matched Bicontinuous Cubic Phases

This perspective describes advances in determining membrane protein structures in lipid bilayers using small-angle neutron scattering (SANS). Differentially labeled detergents with a homogeneous scattering length density facilitate contrast matching of detergent micelles; this has previously been used successfully to obtain the structures of membrane proteins. However, detergent micelles do not mimic the lipid bilayer environment of the cell membrane in vivo. Deuterated vesicles can be used to obtain the radius of gyration of membrane proteins, but protein-protein interference effects within the vesicles severely limits this method such that the protein structure cannot be modeled. We show herein that different membrane protein conformations can be distinguished within the lipid bilayer of the bicontinuous cubic phase using contrast-matching. Time-resolved studies performed using SANS illustrate the complex phase behavior in lyotropic liquid crystalline systems and emphasize the importance of this development. We believe that studying membrane protein structures and phase behavior in contrast-matched lipid bilayers will advance both biological and pharmaceutical applications of membrane-associated proteins, biosensors and food science.

Molecular engineering of antimicrobial peptides: microbial targets, peptide motifs and translation opportunities

The global public health threat of antimicrobial resistance has led the scientific community to highly engage into research on alternative strategies to the traditional small molecule therapeutics. Here, we review one of the most popular alternatives amongst basic and applied research scientists, synthetic antimicrobial peptides. The ease of peptide chemical synthesis combined with emerging engineering principles and potent broad-spectrum activity, including against multidrug-resistant strains, has motivated intense scientific focus on these compounds for the past decade. This global effort has resulted in significant advances in our understanding of peptide antimicrobial activity at the molecular scale. Recent evidence of molecular targets other than the microbial lipid membrane, and efforts towards consensus antimicrobial peptide motifs, have supported the rise of molecular engineering approaches and design tools, including machine learning. Beyond molecular concepts, supramolecular chemistry has been lately added to the debate; and helped unravel the impact of peptide self-assembly on activity, including on biofilms and secondary targets, while providing new directions in pharmaceutical formulation through taking advantage of peptide self-assembled nanostructures. We argue that these basic research advances constitute a solid basis for promising industry translation of rationally designed synthetic peptide antimicrobials, not only as novel drugs against multidrug-resistant strains but also as components of emerging antimicrobial biomaterials. This perspective is supported by recent developments of innovative peptide-based and peptide-carrier nanobiomaterials that we also review.

Synthetic ionizable aminolipids induce a pH dependent inverse hexagonal to bicontinuous cubic lyotropic liquid crystalline phase transition in monoolein nanoparticles

A prospective class of materials for drug delivery is lyotropic liquid crystalline (LLC) nanoparticles, such as cubosomes and hexosomes. Efforts are being made to generate a pH dependent system, which exhibits slow release hexosomes (H₂) at physiological pH and relatively fast release cubosomes (Q₂) at acidic disease sites such as in various cancers and bacterial infection (pH ~ 5.5-6.5). Herein, we report the synthesis of nine ionizable aminolipids, which were doped into monoolein (MO) lipid nanoparticles. Using high throughput formulation and synchrotron small angle X-ray scattering (SAXS), the effects of aminolipid structure and concentration on the mesophase of MO nanoparticles at various pHs were determined. As the pH changed from neutral to acidic, mesophases, could be formed in an order L₂ (inverse micelles) → H₂ → Q₂. Specifically, systems with heterocyclic oleates exhibited the H₂ to Q₂ transition at pH 5.5-6.5. Furthermore, the phase transition pH could be fine-tuned by incorporating two aminolipids into the nanoparticles. Nanoparticles with a pH dependent phase transition as described in this study may be useful as drug delivery carriers for the treatment of cancers and certain bacterial infection.

Analysis of the structure, loading and activity of six antimicrobial peptides encapsulated in cubic phase lipid nanoparticles

The growing global threat of antimicrobial resistance, combined with the slowed development of novel antibiotics, has resulted in a critical need for new antimicrobial therapies. Naturally occurring antimicrobial peptides (AMPs) can act as highly potent, broad-spectrum antibiotics which may be less likely to engender resistance in target organisms. However, their susceptibility to proteolysis and lack of specificity necessitates the use of a drug delivery vehicle to both protect the AMP from chemical degradation and provide a platform for further functionalization, enabling the development of targeted delivery and release systems. In this study, we have used lipid-based inverse bicontinuous cubic phase nanoparticles (cubosomes) as delivery vehicles for six different antimicrobial peptides. The phase stability, morphology, and peptide loading efficiency of the nanoparticles were characterized and rationalized according to lipid composition, buffer conditions, as well as peptide charge and hydrophobicity. The AMP loading efficiency within cubosomes was increased significantly through simple manipulation of electrostatic charge. Minimum inhibitory concentration (MIC) values were determined for formulations with high loading efficiency against Staphylococcus aureus, Bacilus cereus, Escherichia coli, and Pseudomonas aeruginosa. Encapsulation within a lipid nanocarrier was shown to increase antimicrobial activity for some formulations. We anticipate that the further development of these peptide loaded cubosomes will enable the design of potent and targeted antibiotic therapies.

Physiochemical Characterization and Stability of Lipidic Cubic Phases by Solution NMR

Lipidic inverse bicontinuous cubic phases (LCPs), formed via the spontaneous self-assembly of lipids such as monoolein, have found increasing applications in the stabilization and crystallization of integral membrane proteins for structural characterization using X-ray crystallography. Their use as effective drug release matrices has also been demonstrated. Nuclear magnetic resonance (NMR) spectroscopy, both solution and solid state, has previously been employed for the characterization of LCPs and related systems. Herein, we report a number of novel features of solution NMR for probing the fundamental composition and structural properties of monoolein-based LCPs. These include (1) more complete assignments of both ¹H and ¹³C chemical shifts, (2) direct quantification of hydration level in LCPs using one-dimensional (1D) ¹H NMR, and (3) monitoring longer-term stability of LCPs and evaluating alterations introduced into standard LCPs at the submolecular level.

Clinical Applications of Antimicrobial Peptides (AMPs): Where do we Stand Now?

In this era of multi-drug resistance (MDR), antimicrobial peptides (AMPs) are one of the most promising classes of potential drug candidates to combat communicable as well as noncommunicable diseases such as cancers and diabetes. AMPs show a wide spectrum of biological activities which include antiviral, antifungal, anti-mitogenic, anticancer, and anti-inflammatory properties. Apart from these prospective therapeutic potentials, the AMPs can act as food preservatives and immune modulators. Therefore, AMPs have the potential to replace conventional drugs and may gain a significant global drug market share. Although several AMPs have shown therapeutic potential in vitro or in vivo, in most cases they have failed the clinical trial owing to various issues. In this review, we discuss in brief (i) molecular mechanisms of AMPs in various diseases, (ii) importance of AMPs in pharmaceutical industries, (iii) the challenges in using AMPs as therapeutics and how to overcome, (iv) available AMP therapeutics in market, and (v) AMPs under clinical trials. Here, we specifically focus on the therapeutic AMPs in the areas of dermatology, surgery, oncology and metabolic diseases.

Antimicrobial Peptides: A Promising Avenue for Human Healthcare

Antimicrobial drugs resistant microbes have been observed worldwide and therefore alternative development of antimicrobial peptides has gained interest in human healthcare. Enormous progress has been made in the development of antimicrobial peptide during the last decade due to major advantages of AMPs such as broad-spectrum activity and low levels of induced resistance over the current antimicrobial agents. This review briefly provides various categories of AMP, their physicochemical properties and mechanism of action which governs their penetration into microbial cell. Further, the recent information on current status of antimicrobial peptide development, their applications and perspective in human healthcare are also described.

Preparation, Characterization, and Antimicrobial Activity of Cubosome Encapsulated Metal Nanocrystals

Herein, we demonstrate a method for the functionalization of cubic phase lipid nanoparticles (cubosomes) with a series of magnetite (Fe₃O₄), copper oxide (Cu₂O), and silver (Ag) nanocrystals, with prospective applications across a wide range of fields, including antimicrobial treatments. The resulting cubosomes are characterized using small-angle X-ray scattering and dynamic light scattering, demonstrating the retention of a typical cubic phase structure and particle size following nanocrystal encapsulation at concentrations up to 20% w/w. Cryogenic transmission electron microscopy reveals significant loading and association of each nanocrystal type with both monoolein- and phytantriol-based cubosomes. The antibiotic potential of these hybrid nanoparticles is demonstrated for the first time; cubosomes with embedded silver nanocrystals display a high level of antimicrobial activity against both Gram-positive and Gram-negative bacteria, with observed minimum inhibitory concentration values ranging from 15.6-250 μg/mL. Lastly, total internal reflection fluorescence microscopy is used to visualize cubosome-bacteria interactions, suggesting the involvement of particle interactions as a delivery mechanism.

Nuclear Magnetic Resonance Study of the Peptide FRANCESSEPAROVIC

As an eminent ambassador of STEM and renowned NMR spectroscopist, Frances Separovic is an internationally famous name, but could it also be a valuable membrane-active peptide sequence? Her name has been used as an amino acid sequence (FS), successfully synthesised, oxidised, and put into contact with membrane models to investigate any serendipitous activity. The 3D structure of the cyclic FS was determined in dodecylphosphocholine (DPC) micelles by solution NMR spectroscopy. FS displayed a twisted bend separating a helical stretch and an unstructured segment. Using solid-state NMR spectroscopy, the effect of FS on 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phosphoserine (DMPS) lipid bilayers was studied. FS did not strongly disturb the neutral membrane surface but likely inserted into their hydrophobic core without a strong effect on the lipid dynamics, while perturbation of the negatively charged membranes remained at the headgroup interface with a strong effect on the lipid dynamics. This study demonstrated that FS is a candidate for discovering potential future therapeutic activities.

Microfluidic Synthesis of Rifampicin Loaded PLGA Nanoparticles and the Effect of Formulation on their Physical and Antibacterial Properties

The encapsulation of drugs in nanoparticles serves as an effective way to modify pharmacokinetics and therapeutic efficacy. Nanoparticles comprised of poly(d,l-lactide-co-glycolide) (PLGA) are well suited for this purpose; they are accessible using multiple synthesis methods, are highly biocompatible and biodegradable, and possess desirable drug release properties. In the present study, we have explored the effects of various formulation parameters on the physical properties of PLGA nanoparticles synthesised using a microfluidic assisted nanoprecipitation method and loaded with a model drug. PLGA nanoparticles, with diameters ranging from 165–364nm, were produced using three alternate stabilisers; poly(vinyl alcohol) (PVA), d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), and didodecyldimethylammonium bromide (DMAB). Three additional formulations used PVA in addition to 20wt-% 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA), and oleic acid. Spectrophotometric analysis demonstrated that the use of PVA increased the loading efficiency over that of TPGS and DMAB formulations, while the inclusion of oleic acid in the PVA formulation resulted in a further 3-fold increase in loading efficiency. Invitro release studies demonstrate that the inclusion of lipid additives significantly alters release kinetics; release was most rapid and complete in the formulation containing oleic acid, while the addition of DOTAP and DOTMA significantly reduced release rates. Finally, the antimicrobial activity of each formulation was tested against Staphylococcus aureus and Bacillus cereus, with minimum inhibitory concentrations nearing or exceeding that of free rifampicin.

Nanocarriers for Topical Drug Delivery: Approaches and Advancements

Background:

Delivery of drugs through the skin has been an attractive as well as a challenging area for research. Topical drug delivery has provided enormous advantages over the systemic route for various drugs and one of the important amongst them is reduced toxicity due to a minimum or zero exposure to non-target organs.

Methods:

Various nanocarrier loaded topical preparations including organogels, emulgels, niosomal gel, lyotropic liquid crystal based gels, etc have been investigated for their topical application. Nanocarriers loaded topical preparation have been proven for improved permeation through the cutaneous barrier and delivering the drug at the target site. The objective of this review is to study the recent updates regarding newer topical gel formulations and highlighting their current potential and future scope of the same.

Results:

The present work has summarized different studies related to nanotechnology derived topical gel formulations and also enlisted few drugs which have been successfully formulated as novel topical gels. Advancement in nanocarriers loaded topical preparations have also been reviewed with their permeation and efficacy compared to conventional formulations.

Conclusion:

The present review will provide an overview of nanotechnology based topical preparation to the readers and will create curiosity for further development.

Heteronuclear NMR spectroscopy of proteins encapsulated in cubic phase lipids

Lipidic cubic phases, which form spontaneously via the self-assembly of certain lipids in an aqueous environment, are highly prospective nanomaterials with applications in membrane protein X-ray crystallography and drug delivery. Here we report ¹H-¹⁵N heteronuclear single/multiple quantum coherence (HSQC, HMQC) spectra of ¹⁵N-enriched proteins encapsulated in inverse bicontinuous lipidic cubic phases obtained on a standard commercial high resolution NMR spectrometer at ambient temperature. ¹⁵N-enriched proteins encapsulated in this lipidic cubic phase show: (i) no significant changes in tertiary structure, (ii) significantly reduced solvent chemical exchange of backbone amides, which potentially provides a novel concept for quantifying residue-specific hydration; and (iii) improved spectral sensitivity achieved with band-selective excitation short-transient (BEST) spectroscopy, which is attributed to the presence of an abundant source of ¹H nuclear spins originating from the lipid component of the cubic phase.

Self-Assembly of a Catalytically Active Lipopeptide and Its Incorporation into Cubosomes

The self-assembly and biocatalytic activity of the proline-functionalized lipopeptide PRW-NH-C₁₆ are examined and compared to that of the related PRW-O-C₁₆ lipopeptide, which differs in having an ester linker between the lipid chain and tripeptide headgroup instead of an amide linker. Lipopeptide PRW-NH-C₁₆ self-assembles into spherical micelles above a critical aggregation concentration, similar to the behavior of PRW-O-C₁₆ reported previously [B. M. Soares et al. Phys. Chem. Chem. Phys., 2017, 19, 1181-1189]. However, PRW-NH-C₁₆ shows an improved catalytic activity in a model aldol reaction. In addition, we explore the incorporation of the biocatalytic lipopeptide into lipid cubosomes. SAXS shows that increasing lipopeptide concentration leads to an expansion of the monoolein cubosome lattice spacing and a loss of long-range cubic order as the lipopeptide is encapsulated in the cubosomes. At higher loadings of lipopeptide, reduced cubosome formation is observed at the expense of vesicle formation. Our results show that the peptide-lipid chain linker does not influence self-assembly but does impart an improved biocatalytic activity. Furthermore, we show that lipopeptides can be incorporated into lipid cubosomes, leading to restructuring into vesicles at high loadings. These findings point the way toward the future development of bioactive lipopeptide assemblies and slow release cubosome-based delivery systems.

Non-Lamellar Lyotropic Liquid Crystalline Lipid Nanoparticles for the Next Generation of Nanomedicine

Nonlamellar lyotropic liquid crystalline (LLC) lipid nanomaterials have emerged as a promising class of advanced materials for the next generation of nanomedicine, comprising mainly of amphiphilic lipids and functional additives self-assembling into two- and three-dimensional, inverse hexagonal, and cubic nanostructures. In particular, the lyotropic liquid crystalline lipid nanoparticles (LCNPs) have received great interest as nanocarriers for a variety of hydrophobic and hydrophilic small molecule drugs, peptides, proteins, siRNAs, DNAs, and imaging agents. Within this space, there has been a tremendous amount of effort over the last two decades elucidating the self-assembly behavior and structure-function relationship of natural and synthetic lipid-based drug delivery vehicles in vitro, yet successful clinical translation remains sparse due to the lack of understanding of these materials in biological bodies. This review provides an overview of (1) the benefits and advantages of using LCNPs as drug delivery nanocarriers, (2) design principles for making LCNPs with desirable functionalities for drug delivery applications, (3) current understanding of the LLC material-biology interface illustrated by more than 50 in vivo, preclinical studies, and (4) current patenting and translation activities in a pharmaceutical context. Together with our perspectives and expert opinions, we anticipate that this review will guide future studies in developing LCNP-based drug delivery nanocarriers with the objective of translating them into a key player among nanoparticle platforms comprising the next generation of nanomedicine for disease therapy and diagnosis.

Cubosomes: The Next Generation of Smart Lipid Nanoparticles?

Cubosomes are highly stable nanoparticles formed from the lipid cubic phase and stabilized by a polymer based outer corona. Bicontinuous lipid cubic phases consist of a single lipid bilayer that forms a continuous periodic membrane lattice structure with pores formed by two interwoven water channels. Cubosome composition can be tuned to engineer pore sizes or include bioactive lipids, the polymer outer corona can be used for targeting and they are highly stable under physiological conditions. Compared to liposomes, the structure provides a significantly higher membrane surface area for loading of membrane proteins and small drug molecules. Owing to recent advances, they can be engineered in vitro in both bulk and nanoparticle formats with applications including drug delivery, membrane bioreactors, artificial cells, and biosensors. This review outlines recent advances in cubosome technology enabling their application and provides guidelines for the rational design of new systems for biomedical applications.

The stabilization of primitive bicontinuous cubic phases with tunable swelling over a wide composition range

In this paper we investigate the pseudo-ternary phase diagram of glycerol monooleate (GMO), a cationic lipid (DOTAP - 1,2-dioleoyl-3-trimethylammonium propane), and a "PEGylated" lipid (DOPE-PEG - 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000 kDa]) in excess water. We use small angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (Cryo-EM) to map out a phase diagram in a regime of low DOPE-PEG content (1-5 mol%), which is pertinent for the application of lipid systems as carriers of biomolecular cargo to cells. Pure GMO is known to self-assemble into bicontinuous cubic phases of the gyroid type at low water content and of the diamond type in excess water. These complex structures have numerous advantages reaching beyond drug delivery, e.g. as protein crystallization matrices, but their formulation is challenging as very small contents of guest molecules can shift the phase behavior towards other geometries such as the lamellar phase. In this work, we show that the ternary GMO/DOTAP/DOPE-PEG system allows the stabilization of bicontinuous cubic phases in excess water over a wide composition range. The symmetry of the phase can be tuned by varying the amount of PEGylated lipid, with the primitive type dominating at low DOPE-PEG content (1-3 mol%) and the diamond phase arising at 5 mol% DOPE-PEG. In addition, we found that the diamond phase is virtually non-responsive to electrostatic swelling. In contrast, primitive bicontinuous cubic lattice dimensions swell up in equilibrium to 650 Å with increased cationic lipid content.

Metallo-Cubosomes: Zinc-Functionalized Cubic Nanoparticles for Therapeutic Nucleotide Delivery

Development of an effective and potent RNA delivery system remains a challenge for the clinical application of RNA therapeutics. Herein, we describe the development of an RNA delivery platform derived from self-assembled bicontinuous cubic lyotropic liquid crystalline phases, functionalized with zinc coordinated lipids. These metallo-cubosomes were prepared from a series of novel lipidic zinc(II)-bis(dipicolylamine) (Zn₂BDPA)) complexes admixed with glycerol monooleate (GMO). The zinc metallo-cubosomes showed the high affinity to siRNA through interaction between Zn₂BDPA and the phosphate groups of RNA molecules. Using a combination of dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM), we demonstrated that a variety of Zn₂BDPA lipid derivatives can be loaded into GMO cubosomes and the introduction of Zn₂BDPA lipids effected an internal cubic phase transition of the resulting metallo-cubosomes. The findings of this study lay the foundations for the development of a new class of noncationic lipid-based encapsulation systems, metallo-cubosomes for RNA therapeutic delivery.

From Structure to Function: pH-Switchable Antimicrobial Nano-Self-Assemblies

Stimuli-responsive nanocarriers based on lipid self-assemblies have the potential to provide targeted delivery of antimicrobial peptides, limiting their side effects while protecting them from degradation in the biological environments. In the present study, we design and characterize a simple pH-responsive antimicrobial nanomaterial, formed through the self-assembly of oleic acid (OA) with the human cathelicidin LL-37 as a model for an amphiphilic antimicrobial peptide. Colloidal transformations from core-shell cylindrical micelles with a cross-sectional diameter of ∼5.5 nm and a length of ∼23 nm at pH 7.0 to aggregates of branched threadlike micelles at pH 5.0 were detected using synchrotron small-angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering. Biological in vitro assays using an Escherichia coli bacteria strain showed high antimicrobial activity of the positively charged LL-37/OA aggregates at pH 5.0, which was not caused by the pH conditions themselves. Contrary to that, negligible antimicrobial activity was observed at pH 7.0 for the negatively charged cylindrical micelles. The nanocarrier's ability to switch its biological activity "on" and "off" in response to changes in pH could be used to focus the antimicrobial peptides' action to areas of specific pH in the body. The presented findings contribute to the fundamental understanding of lipid-peptide self-assembly and may open up a promising strategy for designing simple pH-responsive delivery systems for antimicrobial peptides.

Protecting bactofencin A to enable its antimicrobial activity using mesoporous matrices

There is huge global concern surrounding the emergence of antimicrobial resistant bacteria and this is resulting in an inability to treat infectious diseases. This is due to a lack of new antimicrobials coming to the market and irresponsible use of traditional antibiotics. Bactofencin A, a novel antimicrobial peptide which shows potential as an antibiotic, is susceptible to enzyme degradation. To improve its solution stability and inherent activity, bactofencin A was loaded onto a traditional silica mesoporous matrix, SBA-15, and a periodic mesoporous organosilane, MSE. The loading of bactofencin A was considerably higher onto SBA-15 than MSE due to the hydrophilic nature of SBA-15. While there was no detectable peptide released from SBA-15 into phosphate buffered saline and only 20% of the peptide loaded onto MSE was released, the loaded matrices showed enhanced activity compared to the free peptide during in vitro antimicrobial assays. In addition, the mesoporous matrices were found to protect bactofencin A against enzymatic degradation where results showed that the SBA-15 and MSE with loaded bactofencin A exposed to trypsin inhibited the growth of S. aureus while a large decrease in activity was observed for free bactofencin upon exposure to trypsin. Thus, the activity and stability of bactofencin A can be enhanced using mesoporous matrices and these matrices may enable its potential development as a novel antibiotic. This work also shows that in silico studies looking at surface functional group and size complementarity between the peptide and the protective matrix could enable the systemic selection of a mesoporous matrix for individual bacteriocins with potential antimicrobial therapeutic properties.

Cubosomes for topical delivery of the antimicrobial peptide LL-37

In this study, the use of cubosomes for topical delivery of the antimicrobial peptide (AMP) LL-37 was investigated. Topical delivery of AMPs is of great interest for treatment of skin infections caused by bacteria, such as Staphylococcus aureus. AMP containing cubosomes were produced by three different preparation protocols and compared: (i) pre-loading, where LL-37 was incorporated into a liquid crystalline gel, which thereafter was dispersed into nanoparticles, (ii) post-loading, where LL-37 was let to adsorb onto pre-formed cubosomes, and (iii) hydrotrope-loading, where LL-37 was incorporated during the spontaneously formed cubosomes in an ethanol/glycerol monooleate mixture. Particle size and size distribution were analyzed using dynamic light scattering (DLS), liquid crystalline structure by small angle x-ray scattering (SAXS) and release of LL-37 by a fluorescamine assay. Proteolytic protection of LL-37 as well as bactericidal effect after enzyme exposure was investigated. The skin irritation potential of cubosomes was examined by an in vitro epidermis model. Finally, the bacterial killing property of the cubosomes was examined by an ex vivo pig skin wound infection model with Staphylococcus aureus. Data showed that a high loading of LL-37 induced formation of vesicles in case of cubosomes prepared by sonication (pre-loading). No release of LL-37 was observed from the cubosomes, indicating strong association of the peptide to the particles. Proteolysis studies showed that LL-37 was fully protected against enzymatic attacks while associated with the cubosomes, also denoting strong association of the peptide to the particles. As a consequence, bactericidal effect after enzyme exposure remained, compared to pure LL-37 which was subjected to proteolysis. No skin irritation potential of the cubosomes was found, thus enabling for topical administration. The ex vivo wound infection model showed that LL-37 in pre-loaded cubosomes killed bacteria most efficient.

Deuterated phytantriol - A versatile compound for probing material distribution in liquid crystalline lipid phases using neutron scattering

Phytantriol is an interfacially-active lipid that is chemically robust, non-digestible and forms particles with internal bicontinuous cubic phase structures (cubosomes) when dispersed with non-ionic surfactants at ambient and physiological temperatures. The liquid crystalline internal structure of phytantriol-based cubosomes can be changed to alter the interfacial contact area/topology with the aqueous dispersant to trigger bioactive payload release or to alter the local membrane curvature around bound or embedded proteins. To enable the study of payload distribution, structure and transformation kinetics within phytantriol particles by neutron scattering techniques it is desirable to have access to a deuterated version of this molecule but to date a synthetic route has not been available. The first successful synthesis of phytantriol-d₃₉ is presented here alongside a preliminary physical characterisation of related particle structures when phytantriol-d₃₉ is dispersed using two non-ionic surfactants, Tween® 80 and Pluronic® F127. Synchrotron small angle X-ray scattering (SAXS) was used to confirm that phytantriol-d₃₉-based nanoparticles in D₂O form similar liquid crystalline structures to those of their natural isotopic abundance (phytantriol/H₂O) counterparts as a function of temperature. Finally, small angle neutron scattering (SANS) with solvent contrast to match out the phytantriol-d₃₉ structuring was used to show that the spatial correlations between the Tween® and Pluronic® non-ionic surfactant molecules are different within dispersed phytantriol-d₃₉ particles with different liquid crystalline structures in D₂O. The surfactant molecules in phytantriol-d₃₉/Tween® 80 particles with Im3m cubic structures were found to follow a self-avoiding walk, whereas in phytantriol-d₃₉/Pluronic® F127 particles with Pn3m cubic structures they were found to follow a more rod-like packing arrangement.

Nonlamellar liquid crystals: a new paradigm for the delivery of small molecules and bio-macromolecules

The aim of this article is to collate the recent developments in the field of drug delivery, medical therapeutics and diagnostics specifically involving the nonlamellar liquid crystalline (NLC) systems. This review highlights different NLC phases having cubic, hexagonal and sponge internal structures, and their application in the field of drug delivery, such as dose reduction, toxicity reduction and therapeutic efficacy enhancement either in the form of nanoparticles, colloidal dispersion or gels. In addition, application of NLC systems as vehicles for peptides, proteins and as a theranostic system in cancer and other disease conditions is also elaborated, which is a growing platform of interest. Overall, the present review gives us a complete outlook on applications of NLC systems in the field of medicine.

Antimicrobial Peptides and Their Therapeutic Potential for Bacterial Skin Infections and Wounds

Alarming data about increasing resistance to conventional antibiotics are reported, while at the same time the development of new antibiotics is stagnating. Skin and soft tissue infections (SSTIs) are mainly caused by the so called ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) which belong to the most recalcitrant bacteria and are resistant to almost all common antibiotics. S. aureus and P. aeruginosa are the most frequent pathogens isolated from chronic wounds and increasing resistance to topical antibiotics has become a major issue. Therefore, new treatment options are urgently needed. In recent years, research focused on the development of synthetic antimicrobial peptides (AMPs) with lower toxicity and improved activity compared to their endogenous counterparts. AMPs appear to be promising therapeutic options for the treatment of SSTIs and wounds as they show a broad spectrum of antimicrobial activity, low resistance rates and display pivotal immunomodulatory as well as wound healing promoting activities such as induction of cell migration and proliferation and angiogenesis. In this review, we evaluate the potential of AMPs for the treatment of bacterial SSTIs and wounds and provide an overview of the mechanisms of actions of AMPs that contribute to combat skin infections and to improve wound healing. Bacteria growing in biofilms are more resistant to conventional antibiotics than their planktonic counterparts due to limited biofilm penetration and distinct metabolic and physiological functions, and often result in chronification of infections and wounds. Thus, we further discuss the feasibility of AMPs as anti-biofilm agents. Finally, we highlight perspectives for future therapies and which issues remain to bring AMPs successfully to the market.