Novel polyglycerol-dioleate based cubosomal dispersion with tailored physical characteristics for controlled delivery of ondansetron

Synthesis of folate targeted theranostic cubosomal platform for co-delivery of bismuth oxide and doxorubicin to melanoma in vitro and in vivo

Liquid crystalline nanoparticles (LCNPs) have gained much attention in cancer nanomedicines due to their unique features such as high surface area, storage stability, and sustained-release profile. In the current study, a novel LCNP for co-encapsulation of Bi2O3 and hydrophilic doxorubicin (DOX) was fabricated and functionalized with folic acid (FA) to achieve efficient tumor targeting toward CT-scan imaging and chemotherapy of melanoma in vitro and in vivo. LCNPs Bi2O3 NPs were prepared using glycerol monooleate-pluronic F-127 (GMO/PF127/water). Firstly, GMO/water were homogenized to prepare LC gel. Then, the stabilizer aqueous solution (PF127/Bi2O3/DOX) was added to the prepared LC gel and homogenized using homogenization and ultrasonication. The formulated NPs exhibited superior stability with encapsulation efficiency. High cytotoxicity and cellular internalization of the FA-Bi2O3-DOX-NPs were observed in comparison with Bi2O3-DOX-NPs and the free DOX in folate-receptor (FR) overexpressing cells (B16F10) in vitro. Moreover, ideal tumor suppression with increased survival rate were observed in tumorized mice treated with FA-Bi2O3-DOX-NPs compared to those treated with non-targeted one. On the other hand, the CT-imaging ability of the Bi2O3-DOX-NPs was tested inB16F10 tumor-bearing mice. The obtained data indicated a high potential of the developed targeted theranostic FA-Bi2O3-DOX-NPs for diagnostics and treatment of melanoma.

Atorvastatin-loaded cubosome: a repurposed targeted delivery systems for enhanced targeting against breast cancer

Cancer ranks as one of the most challenging illnesses to deal with because progressive phenotypic and genotypic alterations in cancer cells result in resistance and recurrence. Thus, the creation of novel medications or alternative therapy approaches is mandatory. Repurposing of old drugs is an attractive approach over the traditional drug discovery process in terms of shorter drug development duration, low-cost, highly efficient and minimum risk of failure. In this study Atorvastatin, a statin drug used to treat abnormal cholesterol levels and prevent cardiovascular disease in people at high risk, was introduced and encapsulated in cubic liquid crystals as anticancer candidate aiming at sustaining its release and achieving better cellular uptake in cancer cells. The cubic liquid crystals were successfully prepared and optimized with an entrapment effieciency of 73.57% ±1.35 and particle size around 200 nm. The selected formulae were effectively doped with radioactive iodine 131I to enable the noninvasive visualization and trafficking of the new formulae. The in vivo evaluation in solid tumor bearing mice was conducted for comparing131I-Atorvastatin solution,131I-Atorvastatin loaded cubosome and 131I-Atorvastatin chitosan coated cubosome. The in vivo biodistribution study revealed that tumor radioactivity uptake of 131I-Atorvastatin cubosome and chitosan coated cubosome exhibited high accumulation in tumor tissues (target organ) scoring ID%/g of 5.67 ± 0.2 and 5.03 ± 0.1, respectively 1h post injection compared to drug solution which recorded 3.09 ± 0.05% 1h post injection. Concerning the targeting efficiency, the target/non target ratio for 131I-Atorvastatin chitosan coated cubosome was higher than that of 131I-Atorvastatin solution and 131I ATV-loaded cubosome at all time intervals and recorded T/NT ratio of 2.908 2h post injection.

Carrageenan tethered ion sensitive smart nanogel containing oleophytocubosomes for improved ocular luteolin delivery

Ophthalmic delivery of luteolin (LU) was studied after formulating a carrageenan-based novel ion-sensitive in situ gel (ISG) incorporating oleophytocubosomes for prolonged ocular residence time and improved ocular bioavailability of the poorly absorbed herbal drug luteolin. The prepared oleophytocubosomes and ISG were compared with LU suspension. Optimized oleophytocubosomes possessed small, homogenously distributed negatively charged particles with high entrapment efficiency. Polarized light microscope revealed a cubic phase. Optimized ISG matrix composed of 0.4% kappa carrageenan (KC), and 2% hydroxypropylmethylcellulose (HPMC) demonstrated rapid gelation, high resistance to dilution, increased viscosity after gelation, and strong mucoadhesive properties. oleophytocubosomes exerted improved drug release, while a more sustained release was observed for ISG oleophytocubosomes. The antioxidant activity of both formulations was significantly higher than that of LU suspension. Oleophytocubosome and ISG oleophytocubosome revealed significantly higher apparent permeability coefficients of 3.62 and 2.90 folds, respectively, compared to LU suspension. Irritation tests showed the safety of both formulations for single- and multiple-ocular administration. In-vivo studies demonstrated that the ISG system showed prolonged antiglaucoma effects and a faster anti-inflammatory effect, followed by oleophytocubosomes.

Travoprost Liquid Nanocrystals: An Innovative Armamentarium for Effective Glaucoma Therapy

To date, the ophthalmic application of liquid crystalline nanostructures (LCNs) has not been thoroughly reconnoitered, yet they have been extensively used. LCNs are primarily made up of glyceryl monooleate (GMO) or phytantriol as a lipid, a stabilizing agent, and a penetration enhancer (PE). For optimization, the D-optimal design was exploited. A characterization using TEM and XRPD was conducted. Optimized LCNs were loaded with the anti-glaucoma drug Travoprost (TRAVO). Ex vivo permeation across the cornea, in vivo pharmacokinetics, and pharmacodynamic studies were performed along with ocular tolerability examinations. Optimized LCNs are constituted of GMO, Tween® 80 as a stabilizer, and either oleic acid or Captex® 8000 as PE at 25 mg each. TRAVO-LNCs, F-1-L and F-3-L, showed particle sizes of 216.20 ± 6.12 and 129.40 ± 11.73 nm, with EE% of 85.30 ± 4.29 and 82.54 ± 7.65%, respectively, revealing the highest drug permeation parameters. The bioavailability of both attained 106.1% and 322.82%, respectively, relative to the market product TRAVATAN®. They exhibited respective intraocular pressure reductions lasting for 48 and 72 h, compared to 36 h for TRAVATAN®. All LCNs exhibited no evidence of ocular injury in comparison to the control eye. The findings revealed the competence of TRAVO-tailored LCNs in glaucoma treatment and suggested the potential application of a novel platform in ocular delivery.

Development of stimuli-responsive lyotropic liquid crystalline nanoparticles targeting lysosomes: Physicochemical, morphological and drug release studies

The abilities of sub-cellular targeting and stimuli-responsiveness are critical challenges in pharmaceutical nanotechnology. In the present study, glyceryl monooleate (GMO)-based non-lamellar lyotropic liquid crystalline nanoparticles were stabilized by the poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) block copolymer carrying tri-phenyl-phosphine cations (TPP-QPDMAEMA-b-PLMA), either used alone or in combination with other polymers as co-stabilizers. The systems were designed to perform simultaneously sub-cellular targeting, stimuli-responsiveness and to exhibit stealthiness. The physicochemical characteristics and fractal dimensions of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. The analyzed properties, including the responsiveness to pH and temperature, were found to be dependent on the combination of the polymeric stabilizers. The subcellular localization was monitored by confocal microscopy, revealing targeting to lysosomes. Subsequently, resveratrol was loaded into the nanosystems, the entrapment efficiency was investigated and in vitro release studies were carried out at different conditions, in which a stimuli-triggered drug release profile was achieved. In conclusion, the proposed multi-functional nanosystems can be considered as potentially stealth, stimuli-responsive drug delivery nanocarriers, with targeting ability to lysosomes and presenting a stimuli-triggered drug release profile.

Lyotropic Liquid Crystalline Nanostructures as Drug Delivery Systems and Vaccine Platforms

Lyotropic liquid crystals result from the self-assembly process of amphiphilic molecules, such as lipids, into water, being organized in different mesophases. The non-lamellar formed mesophases, such as bicontinuous cubic (cubosomes) and inverse hexagonal (hexosomes), attract great scientific interest in the field of pharmaceutical nanotechnology. In the present review, an overview of the engineering and characterization of non-lamellar lyotropic liquid crystalline nanosystems (LLCN) is provided, focusing on their advantages as drug delivery nanocarriers and innovative vaccine platforms. It is described that non-lamellar LLCN can be utilized as drug delivery nanosystems, as well as for protein, peptide, and nucleic acid delivery. They exhibit major advantages, including stimuli-responsive properties for the “on demand” drug release delivery and the ability for controlled release by manipulating their internal conformation properties and their administration by different routes. Moreover, non-lamellar LLCN exhibit unique adjuvant properties to activate the immune system, being ideal for the development of novel vaccines. This review outlines the recent advances in lipid-based liquid crystalline technology and highlights the unique features of such systems, with a hopeful scope to contribute to the rational design of future nanosystems.

Methotrexate-Lactoferrin Targeted Exemestane Cubosomes for Synergistic Breast Cancer Therapy

While the treatment regimen of certain types of breast cancer involves a combination of hormonal therapy and chemotherapy, the outcomes are limited due to the difference in the pharmacokinetics of both treatment agents that hinders their simultaneous and selective delivery to the cancer cells. Herein, we report a hybrid carrier system for the simultaneous targeted delivery of aromatase inhibitor exemestane (EXE) and methotrexate (MTX). EXE was physically loaded within liquid crystalline nanoparticles (LCNPs), while MTX was chemically conjugated to lactoferrin (Lf) by carbodiimide reaction. The anionic EXE-loaded LCNPs were then coated by the cationic MTX–Lf conjugate via electrostatic interactions. The Lf-targeted dual drug-loaded LCNPs exhibited a particle size of 143.6 ± 3.24 nm with a polydispersity index of 0.180. It showed excellent drug loading with an EXE encapsulation efficiency of 95% and an MTX conjugation efficiency of 33.33%. EXE and MTX showed synergistic effect against the MCF-7 breast cancer cell line with a combination index (CI) of 0.342. Furthermore, the Lf-targeted dual drug-loaded LCNPs demonstrated superior synergistic cytotoxic activity with a combination index (CI) of 0.242 and a dose reduction index (DRI) of 34.14 and 4.7 for EXE and MTX, respectively. Cellular uptake studies demonstrated higher cellular uptake of Lf-targeted LCNPs into MCF-7 cancer cells than non-targeted LCNPs after 4 and 24 h. Collectively, the targeted dual drug-loaded LCNPs are a promising candidate offering combinational hormonal therapy/chemotherapy for breast cancer.

The Influence of Hydrophobic Blocks of PEO-Containing Copolymers on Glyceryl Monooleate Lyotropic Liquid Crystalline Nanoparticles for Drug Delivery

The investigation of properties of amphiphilic block copolymers as stabilizers for non-lamellar lyotropic liquid crystalline nanoparticles represents a fundamental issue for the formation, stability and upgraded functionality of these nanosystems. The aim of this work is to use amphiphilic block copolymers, not studied before, as stabilizers of glyceryl monooleate 1-(cis-9-octadecenoyl)-rac-glycerol (GMO) colloidal dispersions. Nanosystems were prepared with the use of poly(ethylene oxide)-b-poly(lactic acid) (PEO-b-PLA) and poly(ethylene oxide)-b-poly(5-methyl-5-ethyloxycarbonyl-1,3-dioxan-2-one) (PEO-b-PMEC) block copolymers. Different GMO:polymer molar ratios lead to formulation of nanoparticles with different size and internal organization, depending on the type of hydrophobic block. Resveratrol was loaded into the nanosystems as a model hydrophobic drug. The physicochemical and morphological characteristics of the prepared nanosystems were investigated by dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), fast Fourier transform (FFT) analysis and X-ray diffraction (XRD). The studies allowed the description of the lyotropic liquid crystalline nanoparticles and evaluation of impact of copolymer composition on these nanosystems. The structures formed in GMO:block copolymer colloidal dispersions were compared with those discussed previously. The investigations broaden the toolbox of polymeric stabilizers for the development of this type of hybrid polymer/lipid nanostructures.

Intranasal versus intraperitoneal Myrj 59-stabilized cubosomes: A potential armamentarium of effective anti-diabetic therapy

The present study is concerned with the suitability of using Myrj 59, out-performing the commonly used stabilizer i.e., poloxamer, for preparation of cubosomes on one hand and gives an insight into the need for distinctive choice of delivery system and administration route towards better diabetes pharmacotherapy on the other hand. In light, repaglinide (REP) cubosomal dispersion and in-situ gel forms were prepared and physicochemically characterized. The selected cubosomal forms were tested for in-vitro drug release and administered via intranasal (IN) and intraperitoneal (IP) routes and compared with Intravenous (IV) REP solution regarding in-vivo antidiabetic efficacy. The results confirmed the formation of cubic nanostructures (170-233 nm), entrapping high REP amounts (93.2-95.66 %). Sustained REP release from selected cubosomal forms was realized with no burst release. Upon in-vivo assessment, IN and IP REP cubosomes and cubosomal gel exhibited superior long-acting in-vivo traits over IV REP solution, respecting percentages of maximum reduction, total decrease in BG levels, and the pharmacological availability. Moreover, IP REP cubosomes and cubosomal gel revealed higher values of the aforementioned parameters than IN counterparts. In conclusion, IN and IP administration of the newly developed cubosomal forms could proffer feasible options for an optimal control of BG levels.

Liquid crystalline nanoparticles for drug delivery: The role of gradient and block copolymers on the morphology, internal organisation and release profile

Amphiphilic polymers represent one of the main class of stabilizers for non-lamellar lyotropic liquid crystalline nanoparticles, being essential for their formation and stability. In the present study, poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) block copolymers and poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) gradient copolymers were incorporated as stabilizers in liquid crystalline nanoparticles prepared from glyceryl monooleate. The polymers were chosen according to their high biocompatibility and promising stealth properties, in order to develop safe and efficient drug delivery nanosystems. The physicochemical characteristics and fractal dimension of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. The effect of temperature, serum proteins and ionic strength on the physicochemical behavior was monitored. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. Their properties were dependent on the stabilizer chemistry and topology (block/gradient copolymer) and its concentration. Subsequently, resveratrol, as model hydrophobic drug, was loaded into the nanosystems, the entrapment efficiency was calculated and in vitro release studies were carried out, highlighting how the different stabilizer can differentiate the drug release profile. In conclusion, the proposed copolymers broaden the toolbox of polymeric stabilizers for the development of liquid crystalline nanoparticles intended for drug delivery applications.

Comparison of three in-situ gels composed of different oil types

A phospholipid-based phase separation in-situ gel (PPSG) system, which consists of phospholipids, medium chain oil (triglyceride) and ethanol as basic ingredients, has been previously developed in our lab. In addition, glycerol monooleate (monoglyceride) and glycerol dioleate (diglyceride) were also reported to be able to form liquid crystal gels. Monoglyceride, diglyceride and triglyceride have different degrees of hydroxyl substitution in glycerol and therefore different amphiphilic properties, which may cause different properties of gels composed of them. In this experiment, glycerol monooleate (GMO), glycerol dioleate (GDO) and glycerol trioleate (GTO) were selected to prepare three kinds of PPSGs. We systematically studied their in-vitro and in-vivo physicochemical properties and investigated their drug release behavior with octreotide (OCT) as the model drug. The results showed that PPSG composed of GTO (GTO-gel) had a different microstructure, a slower solvent diffusion speed and the less irritation to skin. In addition, the drug release result showed that the GTO-gel group had a lower initial release rate and a more stable release profile. All results above indicated that GTO-gel had a greater potential as a drug delivery system.

Delineating penetration enhancer-enriched liquid crystalline nanostructures as novel platforms for improved ophthalmic delivery

Liquid crystalline nanostructures (LCNs), for instance cubosomes, have been widely used as a promising carrier for drug delivery through the last few years. To date, the ophthalmic application of these platforms was not well explored, and the effect of integrating penetration enhancers (PEs) into LCNs has not been investigated yet. Hence, the present work aimed coupling novel PEs into glyceryl monooleate-based cubosomes for ocular administration. Various enhancers viz, free fatty acids (oleic and linoleic acids), natural terpenes (D-limonene and cineole), medium-chain triglycerides (Captex® 1000 and Captex® 8000), mono-/di-glycerides (Capmul® MCM, Capmul® PG-8, and Capmul® PG-12) were tested at different amounts. The morphology of the formed LCNs was investigated using transmission electron microscopy (TEM). The crystallinity and thermal behavior studies were also conducted. The ocular safety of optimized formulae was tested via hen's egg test-chorioallantoic membrane (HET-CAM), rabbit eye Draize test, and histopathological examinations of ocular tissues. Confocal laser scanning microscopy (CLSM) was utilized to assess the enhanced permeation of fluorescently-labeled LCNs across corneal layers. The acceptable formulations exhibited relatively homogenous particle nano-sizes ranging from 139.26 ± 3.68 to 590.56 ± 24.86 nm carrying negative surface charges. TEM images, X-ray patterns and DSC thermograms demonstrated the influential effect of PEs in developing altered crystalline structures. The ocular compatibility of optimized LCNs was confirmed. The corneal distribution using CLSM proved the disseminated fluorescence intensity of LCNs enriched with oleic acid, Captex® 8000 and Capmul® MCM. Selected LCNs showed good physical stability upon storage and lyophilization. The results demonstrated the efficiency of tailored PE-modified LCNs in enhancing the ocular transport with no evidence of any irritation potential, and hence suggested their prospective applicability in ophthalmic drug delivery.

In Situ Hexosomal Gel as a Promising Tool to Ameliorate the Transnasal Brain Delivery of Vinpocetine: Central Composite Optimization and In Vivo Biodistribution

Vascular dementia is a condition characterized by a wretched cerebral circulation which can lead to memory loss. Vinpocetine showed ability to promote the cerebral circulation and depict neuroprotective impacts. However, it suffers from poor bioavailability and requires frequent daily dosing which is not suitable for dementia patients. In our study, these limitations were overcome by the prolonged direct delivery of vinpocetine to the brain utilizing an intranasal in situ hexosomal gel. A central composite design was utilized and the optimum dispersion (consisting of 15% w/w of oleic acid and 5% w/w of pluronic F127) was loaded in an in situ gel system using gellan gum with 1% w/v. The optimized Formulae achieved a controlled drug release over 24 h and the pharmacokinetic data revealed that the C_max and AUC_0-24 in the rats' brain after the intranasal application of the dispersion and in situ gel were significantly higher relative to the vinpocetine solution applied intravenously at the same dose. The potential of both formulae to deliver vinpocetine to the brain directly through the intranasal route was confirmed by the high BTE% of 370.97% and 480.70% and the high DTP% of 73.04% and 79.19% for the dispersion and in situ gel, respectively.

Cubic lyotropic liquid crystals as drug delivery carriers: Physicochemical and morphological studies

The self-assembly process of amphiphilic molecules into solvents results in different mesophases, such as inverse cubic and hexagonal that both belong to the wider category of lyotropic liquid crystals. The above mesophases can be further exploited upon the formation of liquid crystalline nanoparticles, cubosomes and hexosomes respectively, which may be utilized as drug delivery nanosystems, exhibiting major advantages. In the present study, liquid crystalline nanoparticles were prepared and evaluated in terms of morphology and physicochemical behavior. The goal of this study is to examine the effect of the different formulation parameters, as well as the effect of the different microenvironmental factors (temperature, ionic strength, pH, serum proteins presence) on their behavior. The physicochemical behavior and the morphology of the systems were investigated by X-Ray Diffraction (XRD), cryogenic-Transmission Electron Microscopy (cryo-TEM), fluorescence spectroscopy and a gamut of light scattering techniques. The formulation process was proved to influence strictly the physicochemical behavior of the prepared nanosystems. They presented colloidal stability over time and upon ionic strength increase, but they were affected by the presence of proteins and presented reversible structure alterations upon temperature increase. Their morphological structure and internal microenvironment, reflected by micropolarity and microfluidity, were also influenced by the formulation parameters.