Control of human skin wettability using the pH of anionic surfactant solution treatments

Simultaneous imaging of multi-pore sweat dynamics and evaporation rate measurement using wind tunnel ventilated capsule with infrared window

Sweat evaporation is critical to human thermoregulation, but current understanding of the process on 20 μm to 2 cm scale is limited. To this end, we introduce a wind-tunnel-shaped ventilated capsule with an infrared window for simultaneous infrared sweat imaging and evaporation rate measurement. Implementing the capsule in pilot human subject tests suggests that the common assumption of sweat being an isothermal film is only valid when the evaporation rate is low and sweat forms puddles on the skin. Before transitioning to this filmwise mode, sweating occurs in cyclic dropwise mode, displaying a 3x higher mass transfer coefficient in the same conditions. Imaging highlighted distinct phenomena occurring during and between these modes including out-of-duct evaporation, pulsating droplets, temporary and eventually lasting crevice filling, and individual drop-to-film spreading. In all, sweat evaporation is an impactful area that our results show is ripe for exploration, which can be achieved quantitatively using the introduced platform.

Fabrication of dual drug-loaded polycaprolactone-gelatin composite nanofibers for full thickness diabetic wound healing

Aim: Design of moxifloxacin and ornidazole co-loaded polycaprolactone and gelatin nanofiber dressing for diabetic wounds. Materials & methods: The composite nanofibers were prepared using electrospinning technique and characterized for in vitro drug release, antibacterial activity, laser doppler and in vivo wound healing. Results: The optimized nanofiber demonstrated an interconnected bead free nanofiber with average diameter <200 nm. The in vitro drug release & antimicrobial studies revealed that optimized nanofiber provided drug release for >120 h, thereby inhibiting growth of Escherichia coli and Stapyhlococcus aureus. An in vivo wound closure study on diabetic rats found that optimized nanofiber group had a significantly higher wound closure rate than marketed formulation. Conclusion: The nanofiber provided prolonged drug release and accelerated wound healing, making it a promising candidate for diabetic wound care.

Hexagonal liquid crystalline system containing Cinnamaldehyde for enhancement of skin permeation of Sinomenine hydrochloride

Sinomenine hydrochloride (SH) is usually applied to treat rheumatoid arthritis (RA) with severe side effect due to oral administration. Cinnamaldehyde (CA) as essential oil possesses anti-RA effect and can facilitate transdermal penetration. Hence, this study developed hexagonal liquid crystalline (HII) gels to deliver two components (SH and CA) across the skins. HII gels were prepared and characterized by polarized light microscopy (PLM), small-angle X-ray scattering (SAXS) and rheology. Moreover, in vitro drug release behavior and ex vivo skin permeation were investigated. Finally, Fourier transform infrared spectral analysis (FTIR) and confocal laser scanning microscopy (CLSM) were used to explore the skin penetration mechanism. PLM and SAXS showed that the inner structure of the gels was HII phase. The addition of lipophilic or hydrophilic molecule slowed down one another's release and the release model was dominated by Fickian diffusion (n< 0.43). Furthermore, in vitro permeation studies indicated that appropriate CA could improve the skin permeability of SH. FTIR and CLSM suggested that infiltration occurred due to disruption of the lipid bilayer structure and increased fluidity of the skin. In conclusion, HII gels and CA exhibited a penetration-promoting effect for transdermal applications in SH.

Three-phase flow displacement dynamics and Haines jumps in a hydrophobic porous medium

We use synchrotron X-ray micro-tomography to investigate the displacement dynamics during three-phase—oil, water and gas—flow in a hydrophobic porous medium. We observe a distinct gas invasion pattern, where gas progresses through the pore space in the form of disconnected clusters mediated by double and multiple displacement events. Gas advances in a process we name three-phase Haines jumps, during which gas re-arranges its configuration in the pore space, retracting from some regions to enable the rapid filling of multiple pores. The gas retraction leads to a permanent disconnection of gas ganglia, which do not reconnect as gas injection proceeds. We observe, in situ, the direct displacement of oil and water by gas as well as gas–oil–water double displacement. The use of local in situ measurements and an energy balance approach to determine fluid–fluid contact angles alongside the quantification of capillary pressures and pore occupancy indicate that the wettability order is oil–gas–water from most to least wetting. Furthermore, quantifying the evolution of Minkowski functionals implied well-connected oil and water, while the gas connectivity decreased as gas was broken up into discrete clusters during injection. This work can be used to design CO₂ storage, improved oil recovery and microfluidic devices.

Dynamics of water injection in an oil-wet reservoir rock at subsurface conditions: Invasion patterns and pore-filling events

We use fast synchrotron x-ray microtomography to investigate the pore-scale dynamics of water injection in an oil-wet carbonate reservoir rock at subsurface conditions. We measure, in situ, the geometric contact angles to confirm the oil-wet nature of the rock and define the displacement contact angles using an energy-balance-based approach. We observe that the displacement of oil by water is a drainagelike process, where water advances as a connected front displacing oil in the center of the pores, confining the oil to wetting layers. The displacement is an invasion percolation process, where throats, the restrictions between pores, fill in order of size, with the largest available throats filled first. In our heterogeneous carbonate rock, the displacement is predominantly size controlled; wettability has a smaller effect, due to the wide range of pore and throat sizes, as well as largely oil-wet surfaces. Wettability only has an impact early in the displacement, where the less oil-wet pores fill by water first. We observe drainage associated pore-filling dynamics including Haines jumps and snap-off events. Haines jumps occur on single- and/or multiple-pore levels accompanied by the rearrangement of water in the pore space to allow the rapid filling. Snap-off events are observed both locally and distally and the capillary pressure of the trapped water ganglia is shown to reach a new capillary equilibrium state. We measure the curvature of the oil-water interface. We find that the total curvature, the sum of the curvatures in orthogonal directions, is negative, giving a negative capillary pressure, consistent with oil-wet conditions, where displacement occurs as the water pressure exceeds that of the oil. However, the product of the principal curvatures, the Gaussian curvature, is generally negative, meaning that water bulges into oil in one direction, while oil bulges into water in the other. A negative Gaussian curvature provides a topological quantification of the good connectivity of the phases throughout the displacement.

Amphiphilic cationic polymers as effective substances improving the safety of use of body wash gels

Cationic surfactants have a wide range of applications in the cosmetic industry. The present study is an attempt to determine the effect of an amphiphilic cationic polymer - a cationic derivative of guar gum - on the safety of use of body wash cosmetics. Model body wash gels based on an anionic surfactant, containing 0.05, 0.25 and 0.5% of the studied compound, were subjected to analyses in order to evaluate their skin irritation effect and the ability to solubilize model sebum. Cell culture studies were also carried out. In addition, the effect of the cationized guar gum derivative on the key quality parameters of body wash cosmetics (viscosity and foaming properties) was assessed. The analyses showed that the addition of the cationic guar gum derivative induced a significant increase in the safety of use of the model body wash gels without causing any impairment of the functional properties of the product.

The enhanced removal and phytodegradation of sodium dodecyl sulfate (SDS) in wastewater using controllable water hyacinth

Surfactant is an emerging and popular pollutant in both rural and urban areas and its treatment efficacy by phytoremediation is rarely reported. Water hyacinth was utilized to clean anionic surfactant sodium dodecyl sulfate (SDS) in water and its growth and physiological activities were regulated with Chromolaena odorata L. extract. SDS was effectively removed from the water and then transferred to both root and aerial part of water hyacinth. Part of SDS was converted into low-molecular weight degradation intermediates by the hydrogen abstraction reactions in water hyacinth. The removal efficiency and the degradation of SDS were evidently strengthened accompanying with enhanced root activity and ascorbate peroxidase (APX) activity in the presence of Chromolaena odorata L. extract. Meanwhile, the growth of water hyacinth was effectively controlled, exhibiting low-growth rate (≤0.036 g.day^-1). Furthermore, the root was considered as the major organ to degrade SDS, which was correlated to the remarkable increase in APX activity and a slight increase in root activity under both SDS and extract stress. In conclusion, water hyacinth managed with Chromolaena odorata L. extract should be proposed as an eco-friendly biotechnical treatment for the surfactant.

Wettability in complex porous materials, the mixed-wet state, and its relationship to surface roughness

A quantitative in situ characterization of the impact of surface roughness on wettability in porous media is currently lacking. We use reservoir condition micrometer-resolution X-ray tomography combined with automated methods for the measurement of contact angle, interfacial curvature, and surface roughness to examine fluid/fluid and fluid/solid interfaces inside a porous material. We study oil and water in the pore space of limestone from a giant producing oilfield, acquiring millions of measurements of curvature and contact angle on three millimeter-sized samples. We identify a distinct wetting state with a broad distribution of contact angle at the submillimeter scale with a mix of water-wet and water-repellent regions. Importantly, this state allows both fluid phases to flow simultaneously over a wide range of saturation. We establish that, in media that are largely water wet, the interfacial curvature does not depend on solid surface roughness, quantified as the local deviation from a plane. However, where there has been a significant wettability alteration, rougher surfaces are associated with lower contact angles and higher interfacial curvature. The variation of both contact angle and interfacial curvature increases with the local degree of roughness. We hypothesize that this mixed wettability may also be seen in biological systems to facilitate the simultaneous flow of water and gases; furthermore, wettability-altering agents could be used in both geological systems and material science to design a mixed-wetting state with optimal process performance.

Interactions between surfactants and the skin - Theory and practice

One of the primary causes of skin irritation is the use of body wash cosmetics and household chemicals, since they are in direct contact with the skin, and they are widely available and frequently used. The main ingredients of products of this type are surfactants, which may have diverse effects on the skin. The skin irritation potential of surfactants is determined by their chemical and physical properties resulting from their structure, and specific interactions with the skin. Surfactants are capable of interacting both with proteins and lipids in the stratum corneum. By penetrating through this layer, surfactants are also able to affect living cells in deeper regions of the skin. Further skin penetration may result in damage to cell membranes and structural components of keratinocytes, releasing proinflammatory mediators. By causing irreversible changes in cell structure, surfactants can often lead to their death. The paper presents a critical review of literature on the effects of surfactants on the skin. Aspects discussed in the paper include the skin irritation potential of surfactants, mechanisms underlying interactions between compounds of this type and the skin which have been proposed over the years, and verified methods of reducing the skin irritation potential of surfactant compounds. Basic research conducted in this field over many years translate into practical applications of surfactants in the cosmetic and household chemical industries. This aspect is also emphasized in the present study.