Modulating in vitro gastric digestion of emulsions using composite whey protein-cellulose nanocrystal interfaces

Synergistic stabilization of high internal phase Pickering emulsions by peanut isolate proteins and cellulose nanocrystals for β-carotene encapsulation

In this study, high internal phase Pickering emulsions (HIPPEs) were stabilized by the complexes of peanut protein isolate (PPI) and cellulose nanocrystals (CNCs) for encapsulation β-carotene to retard its degradation during processing and storage. CNCs were prepared by H2SO4 hydrolysis (HCNCs), APS oxidation (ACNCs) and TEMPO oxidation (TCNCs), exhibiting needle-like or rod-like structures with nanoscale size and uniformly distributed around the spherical PPI particle, which enhanced the emulsifying capability of PPI. Results of optical micrographs and droplet size measurement showed that Pickering emulsions stabilized by PPI/ACNCs complexes exhibited the most excellent stability after 30 days of storage, which indicated that ACNCs had the most obvious effect to improve emulsifying capability of PPI. HIPPEs encapsulated β-carotene (βc-HIPPEs) were stabilized by PPI/ACNCs complexes and showed excellent inverted storage stability. Moreover, βc-HIPPEs exhibited typical shear thinning behavior investigated by rheological properties analysis. During thermal treatment, ultraviolet radiation and oxidation, the retentions of β-carotene encapsulated in HIPPEs were improved significantly. This research holds promise in expanding Pickering emulsions stabilized by proteins-polysaccharide particles to delivery systems for hydrophobic bioactive compounds.

Impact of Whey Protein Isolate and Xanthan Gum on the Functionality and in vitro Digestibility of Raw and Cooked Chestnut Flours

Due to the limitations of the properties of chestnut flour, its applications have been restricted. The objective of this study is to investigate the impact of whey protein isolate (WPI) and xanthan gum (XG) on the functional and digestive properties of chestnut flour, specifically focusing on gel texture, solubility and swelling power, water absorption capacity, freeze-thaw stability and starch digestibility. The addition of both WPI and XG reduced the gel hardness, gumminess and chewiness of the co-gelatinized and physically mixed samples. Furthermore, the inclusion of physically mixed WPI and XG led to an increase in the solubility (from 58.2 to 75.0%) and water absorption capacity (from 3.11 to 5.45 g/g) of chestnut flour. The swelling power of the chestnut flour was inhibited by both additives. WPI was superior to XG at maintaining freeze-thaw stability, by reducing the syneresis from 71.9 to 68.1%. Additionally, WPI and XG contributed to the inhibition of starch hydrolysis in the early stage of digestion, resulting in a lower starch digestibility of chestnut flours. This research provides insights into the interaction mechanisms between WPI, XG, and chestnut flour, offering valuable information for the development of chestnut flour products with enhanced properties.

Important Role and Properties of Granular Nanocellulose Particles in an In Vitro Simulated Gastrointestinal System and in Lipid Digestibility and Permeability

This research evaluated the role and feasibility of the granular nanocellulose particles (GNC) from sugarcane bagasse obtained from enzymatic hydrolysis in reducing lipid digestibility and permeability in an in vitro simulated gastrointestinal (GI) system. GNC concentration (0.02%, w/v) had significantly affected the released free fatty acids (FFA), with a reduction of approximately 20%. Pickering emulsion of a GNC and olive oil simulation mixture revealed higher oil droplet size distribution and stability in the initial stage than the vortexed mixture formation. The difference in particle size distribution and zeta potential of the ingested GNC suspension and GNC-olive oil emulsion were displayed during the in vitro gastrointestinal simulation. GNC particles interacted and distributed surrounding the oil droplet, leading to interfacial emulsion. The GNC concentration (0.01-0.10%, w/v) showed low toxicity on HIEC-6 cells, ranging from 80.0 to 99% of cell viability. The release of FFA containing the ingested GNC suspension and GNC-olive oil emulsion had about a 30% reduction compared to that without the GNC digestion solution. The FFA and triglyceride permeability through the HIEC-6 intestinal epithelium monolayer were deceased in the digesta containing the ingested GNC and emulsion. This work indicated that GNC represented a significantly critical role and properties in the GI tract and reduced lipid digestion and absorption. This GNC could be utilized as an alternative food additive or supplement in fatty food for weight control due to their inhibition of lipid digestibility and assimilation.

Apparent Failures in Interpretation of Interfacial Characterization When Formulating Emulsions Stabilized by Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) are sustainable particles that are effective at stabilizing emulsions by adsorbing at droplet interfaces and providing a steric barrier to coalescence. However, CNCs have surface charges that reduce the coverage of the emulsion droplets due to the electrostatic repulsion between CNCs. In such cases, adding salt is a typical (and straightforward) way to adjust the formulation so that the charges are screened, allowing increased coverage of the droplets. At the outset of this work, we hypothesized that characterization of the interfacial tension and interfacial shear rheology of the oil-water interface would be correlated to interfacial coverage and therefore predictive of the optimal salt concentration for emulsion stability. Included in the methods section as a useful reference to others is the presentation of a detailed derivation for the equations needed to compute interfacial shear moduli in a custom, double-gap geometry. In contrast to our hypothesis, we found that interfacial tension did not correlate well with emulsion stability and that the native surface-active compounds in corn oil overwhelmed any influence of the CNCs on the interfacial tension. Additionally, we found that interfacial shear rheology (which can be painstakingly difficult to measure) was not a useful tool for formulating these emulsions. This is because at commonly used concentrations of CNCs, the bulk rheology is increased to a much greater degree than that of the interface, making the details of the interfacial rheology unimportant. Finally, we found that at concentrations of CNCs that are typical in industrial processes, characterizing the bulk viscoelastic properties of the aqueous suspending phase without added oil (a relatively simple measurement) is sufficient to predict the influence of NaCl concentration on charge screening between the CNCs and, by extension, increased surface coverage of droplets for greater emulsion stability.

Plant-derived polyphenolic compounds: nanodelivery through polysaccharide-based systems to improve the biological properties

Plant-derived polyphenols are naturally occurring compounds widely distributed in plants. They have received greater attention in the food and pharmaceutical industries due to their potential health benefits, reducing the risk of some chronic diseases due to their antioxidant, anti-inflammatory, anticancer, cardioprotective, and neuro-action properties. Polyphenolic compounds orally administered can be used as adjuvants in several treatments but with restricted uses due to chemical instability. The review discusses the different structural compositions of polyphenols and their influence on chemical stability. Despite the potential and wide applications, there is a need to improve the delivery of polyphenolics to target the human intestine without massive chemical modifications. Oral administration of polyphenols is unfeasible due to instability, low bioaccessibility, and limited bioavailability. Nano-delivery systems based on polysaccharides (starch, pectin, chitosan, and cellulose) have been identified as a viable option for oral ingestion, potentiate biological effects, and direct-controlled delivery in specific tissues. The time and dose can be individualized for specific diseases, such as intestinal cancer. This review will address the mechanisms by which polysaccharides-based nanostructured systems can protect against degradation and enhance intestinal permeation, oral bioavailability, and the potential application of polysaccharides as nanocarriers for the controlled and targeted delivery of polyphenolic compounds.

Observation of curcumin-encapsulated Pickering emulsion stabilized by cellulose nanocrystals-whey protein isolate (CNCs-WPI) complex under in vitro lipid digestion through INFOGEST model

Curcumin-encapsulated Pickering emulsion (Cur-PE) was successfully prepared using cellulose nanocrystals (CNCs)-whey protein isolate (WPI) complex as a stabilizer to control the size and stability of the Cur-PE. Firstly, needle-like CNCs were prepared by acid hydrolysis, and the mean particle size, polydispersity index (PDI), zeta potential, and aspect ratio of the CNCs were 100.7 nm, 0.32, -43.6 mV, and 20.8, respectively. The Cur-PE-C_0.5W_0.1, prepared with 0.5 wt% CNCs and 0.1 wt% WPI at pH 2, had a mean droplet size of 230.0 nm, PDI of 0.275, and zeta potential of +53.5 mV. The Cur-PE-C_0.5W_0.1 prepared at pH 2 exhibited the highest stability during storage for 14 days. FE-SEM revealed that the droplets of the Cur-PE-C_0.5W_0.1 prepared at pH 2 were spherical and fully covered by CNCs. The adsorption of CNCs at the oil-water interface increases the encapsulation efficiency (89.4 %) of curcumin in the Cur-PE-C_0.5W_0.1 and protects curcumin from pepsin digestion in the gastric phase. However, the Cur-PE-C_0.5W_0.1 was sensitive to release curcumin in the intestine phase. The CNCs-WPI complex developed in this study could serve as a promising stabilizer to make Pickering emulsions stable at pH 2 for the encapsulation and delivery of curcumin to the expected target area.

Protein-polysaccharides based nanoparticles for loading with Malus baccata polyphenols and their digestibility in vitro

The poor solubility, instability and low absorption rate obstruct the bioavailability of polyphenols isolated from Malus baccata (MBP) during gastrointestinal digestion. In order to solve the limitable problems, the food-grade nanoparticles were fabricated by mucin (MC) and Hohenbuehelia serotina polysaccharides (HSP) for delivery of MBP (MBP-NPs). The physicochemical properties and morphology of MBP-NPs prepared by different condition were respectively characterized. During gastrointestinal digestion in vitro, the release characteristic and variation in phenolic composition of MBP-NPs were evaluated. The results showed that MBP-NPs formed by hydrogen bonding and hydrophobic interaction possessed the regularly spherical shapes and smooth surfaces and semi-crystalline properties. Moreover, MBP-NPs presented the excellent physicochemical stability. During simulated gastrointestinal digestion in vitro, MBP-NPs exhibited the sustained release characteristics of phenolic compounds, which were confirmed by SDS-PAGE measurement. Compared with that of unencapsulated MBP, the significant variation was occurred in the phenolic composition of MBP-NPs, indicating that MBP-NPs could prevent the degradation and transformation of phenolic compounds. This study provides a novel strategy to improve the bioavailability of polyphenols.

Interaction between whey protein and soy lecithin and its influence on physicochemical properties and in vitro digestibility of emulsion: A consideration for mimicking milk fat globule

In this study, from the perspective of simulating the milk fat globule (MFG) emulsion, the interaction between soybean lecithin (SL) and the main protein in milk, whey protein (WP), and its effect on physical characteristics and lipid digestion were investigated through multiple spectroscopic techniques and in vitro digestion. The mechanism of SL and WP was static quenching, indicating that a complex formed between WP and SL through hydrophobic interaction and hydrogen bonding. The addition of SL changed the secondary structure of WP. When the ratio of SL to WP was 1:3, the obtained SL-WP emulsion that simulated milk fat globule exhibited the smallest particle size distribution and the highest absolute value of zeta potential. In addition, the emulsion exhibited high encapsulation efficiency (91.67 ± 1.24 %) and good stability. Compared with commercially available infant formula (IF), the final free fatty acid release of prepared SL-WP emulsion was close to that of human milk (HM). The addition of lecithin increased the digestibility of fat and the release of free fatty acids, and the digestive characteristic and particle size change also were closer to that of HM from results of kinetics of free fatty acid release and microstructure analysis.

Thermal insulation and antibacterial foam templated from bagasse nanocellulose /nisin complex stabilized Pickering emulsion

Foam packaging with good thermal insulation and antibacterial properties is promising for cold chain delivery to strengthen food safety. This study reports a novel antibacterial foam with thermal insulation templated from bagasse nanocellulose complex particle-stabilised acrylate epoxy soybean oil (AESO) Pickering emulsions. Nanocellulose/nisin complex particles (N-CNFs) were prepared by loading positively charged nisin onto negatively charged cellulose nanofibrils via electrostatic interactions, that highly enhanced the stability of nanocellulose at the AESO/water interface and imparted the corresponding foam with good antibacterial properties. The results show that the porosity of the foam prepared with N-CNFs increased from 10.9% to 29.9% compared with that of the foam corresponding with bare nanocellulose; the thermal conductivity of the N-CNF foam decreased substantially from 0.431 W/m·K to 0.197 W/m·K. Moreover, the prepared foam exhibited good antibacterial activity, and its bacteriostatic rate against Listeria monocytogenes was 91.33%. The incorporation of antibacterial peptides into nanocellulose has enriched the study of the Pickering emulsion templating method for preparing multifunctional foam materials and is expected to broaden the application of nanocellulose in the field of food packaging.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

Effects of lipid type and toxicological properties on the digestion of cellulose nanocrystals in simulated gastrointestinal tract

This study aimed to understand the impact of different oil types on the cellulose nanocrystals (CNCs) to modulate lipid digestion and the in vitro gastrointestinal toxicity of CNCs in food systems. We explored the ability of CNCs to modulate lipid digestion in a simulated gastrointestinal system and monitored the gastrointestinal fate of CNC-based emulsions with different oil types. Finally, a small intestine epithelial model was used to evaluate the influence of cytotoxicity. The results suggested that the addition of 0.6 wt% CNCs in the high-fat food model reduced the hydrolysis of free fatty acids (FFAs) from triglycerides by 37.8% after the small intestine phase. CNCs showed the best effect in reducing lipid digestion in emulsions with high unsaturation triglycerides. In addition, the toxicology results suggest that 0.6 wt% CNCs had only a slight effect on reactive oxygen species and cytotoxicity, and no significant change in cell-layer integrity.

Studies into interactions and interfacial characteristics between cellulose nanocrystals and bovine serum albumin

•

Interactions between cellulose nanocrystal (CNC) and BSA were studied.

•

BSA dominated the interface behavior in CNC/BSA complex.

•

BSA and CNC formed viscoelastic layers at pH 3 driven by electrostatic attraction.

•

Interactions mainly occurred between (1 0 0) surface of CNC and domain IIA of BSA.

This study investigates the interactions between cellulose nanocrystals (CNCs) and bovine serum albumin (BSA) under different pH conditions. A multiscale technique was employed to characterize the CNCs and BSA at pH 7 and pH 3. ζ-Potential measurement and UV–vis spectroscopy demonstrated strong interactions between CNCs and BSA at pH 3, whereat they have opposite charges. Interfacial tensiometry showed a deficiency in the surface activity of the CNCs and indicated that BSA dominated the interface behavior in their complex. Quartz crystal microbalance with dissipation revealed that the sequential adsorption of BSA and CNCs produced viscoelastic bilayers at pH 3, and the mass adsorbed was ∼ 28 times that adsorbed at pH 7. Molecular dynamics simulations indicated that the key interactions between the two materials were produced between the hydrophobic CNC surface and the BSA domain IIA region. These results provide interesting insights into the design of complex food emulsions and fluid interfaces.

Analysis of the Factors Affecting Static In Vitro Pepsinolysis of Food Proteins

In this meta-analysis, we collected 58 publications spanning the last seven decades that reported static in vitro protein gastric digestion results. A number of descriptors of the pepsinolysis process were extracted, including protein type; pepsin activity and concentration; protein concentration; pH; additives; protein form (e.g., ‘native’, ‘emulsion’, ‘gel’, etc.); molecular weight of the protein; treatment; temperature; and half-times (HT) of protein digestion. After careful analysis and the application of statistical techniques and regression models, several general conclusions could be extracted from the data. The protein form to digest the fastest was ‘emulsion’. The rate of pepsinolysis in the emulsion was largely independent of the protein type, whereas the gastric digestion of the native protein in the solution was strongly dependent on the protein type. The pepsinolysis was shown to be strongly dependent on the structural components of the proteins digested—specifically, β-sheet-inhibited and amino acid, leucine, methionine, and proline-promoted digestion. Interestingly, we found that additives included in the digestion mix to alter protein hydrolysis had, in general, a negligible effect in comparison to the clear importance of the protein form or additional treatment. Overall, the findings allowed for the targeted creation of foods for fast or slow protein digestion, depending on the nutritional needs.

In vitro gastrointestinal digestibility of corn oil-in-water Pickering emulsions stabilized by three types of nanocellulose

The effect of three nanocellulose (various in crystalline allomorph and morphology) on lipid in vitro gastrointestinal digestibility was investigated. Corn oil-in-water emulsions were prepared by CNCs-I, CNCs-II and CNFs respectively. The variations of droplets diameter D[4,3], zeta potential, and microstructure were measured during gastrointestinal digestion (mouth, stomach and small intestine), and the free fatty acid (FFA) released in the small intestine phase were examined. The FFA-released test results indicated that both crystalline allomorph and morphology of nanocellulose affected the degree of lipid digestion, especially the morphology. FFA released amount was ranked in the order of CNCs-I (56.60%), CNCs-II (48.67%) and CNFs (28.21%). This is mainly due to the difference in the self-assembly behavior of nanocellulose at the interface. Our findings provide an innovative solution that using nanocellulose as food-grade particle stabilizer to modulate the digestion of Pickering emulsified lipids, which would benefit the development of given functional foods.

Advances in nanotechnology and the benefits of using cellulose nanofibers in animal nutrition

The production of cellulose nanofibers promotes the utilization of plant residues that are generated in agro-industries during food processing. The utilization of these plant by-products reduces environmental contamination. Cellulose nanofibers are used in several sectors, including the drug, food, and animal nutrition industries. Many sources of nanofibers used in animal diets can be used as potential fiber substitutes after being processed to improve efficiency. For instance, including nanometric particles of plant fibers (<100 nm) in animal feed may provide excellent physical properties such as high reactivity, a large surface area, and improved nutrient absorption from the diet. Nanotechnology improves the characteristics of fibers that are important for gastrointestinal transit and their utilization as energy sources and substrates for microbial fermentation in the digestive tract of animals. Nanofibers can improve the synthesis of volatile fatty acids and the blood lipid profile, with positive effects on the intestinal health of animals. Moreover, in vitro and in vivo studies have demonstrated promising effects in reducing blood glucose levels without toxic effects on the body. Supplying nanofibers in the diet improve animal performance, increase productivity, and work toward a more sustainable economic development of agribusinesses. The quality of animal products such as meat, milk, and eggs is also reported to be improved with the inclusion of nanominerals in the feed. Overall, the application of nanotechnology to harness the by-products of agro-industries can increase economic viability and sustainability in animal production systems. Therefore, this review presents a current survey on the main research and advances in the utilization of nanotechnology, focusing on cellulose nanofibers in animal feed to improve animal performance.

Exploration of the Microstructure and Rheological Properties of Sodium Alginate-Pectin-Whey Protein Isolate Stabilized Β-Carotene Emulsions: To Improve Stability and Achieve Gastrointestinal Sustained Release

Sodium alginate (SA)-pectin (PEC)-whey protein isolate (WPI) complexes were used as an emulsifier to prepare β-carotene emulsions, and the encapsulation efficiency for β-carotene was up to 93.08%. The confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) images showed that the SA-PEC-WPI emulsion had a compact network structure. The SA-PEC-WPI emulsion exhibited shear-thinning behavior and was in a semi-dilute or weak network state. The SA-PEC-WPI stabilized β-carotene emulsion had better thermal, physical and chemical stability. A small amount of β-carotene (19.46 ± 1.33%) was released from SA-PEC-WPI stabilized β-carotene emulsion in simulated gastric digestion, while a large amount of β-carotene (90.33 ± 1.58%) was released in simulated intestinal digestion. Fourier transform infrared (FTIR) experiments indicated that the formation of SA-PEC-WPI stabilized β-carotene emulsion was attributed to the electrostatic and hydrogen bonding interactions between WPI and SA or PEC, and the hydrophobic interactions between β-carotene and WPI. These results can facilitate the design of polysaccharide-protein stabilized emulsions with high encapsulation efficiency and stability for nutraceutical delivery in food and supplement products.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

Nanocellulose in Emulsions and Heterogeneous Water-Based Polymer Systems: A Review

Nanocelluloses (i.e., bacterial nanocellulose, cellulose nanocrystals, and cellulose nanofibrils) are cellulose-based materials with at least one dimension in the nanoscale. These materials have unique and useful properties and have been shown to assemble at oil-water interfaces and impart new functionality to emulsion and latex systems. Herein, the use of nanocellulose in both emulsions and heterogeneous water-based polymers is reviewed, including dispersion, suspension, and emulsion polymerization. Comprehensive tables describe past work employing nanocellulose as stabilizers or additives and the properties that can be tailored through the use of nanocellulose are highlighted. Even at low loadings, nanocellulose offers an unprecedented level of control as a property modifier for a range of emulsion and polymer applications, influencing, for example, emulsion type, stability, and stimuli-responsive behavior. Nanocellulose can tune polymer particle properties such as size, surface charge, and morphology, or be used to produce capsules and polymer nanocomposites with enhanced mechanical, thermal, and adhesive properties. The role of nanocellulose is discussed, and a perspective for future direction is presented.

Synergistic stabilization of oil in water emulsion with chitin particles and tannic acid

The aim of the present study was to explore the effect of CP and TA on stability of oil in water emulsion stabilized by the two components, so as to fabricate the most efficient chitin based emulsifying agents. It was found that there was synergistic effect for CP and TA in stabilizing emulsion, specifically, the complex of chitin particles (CP) (3 g/L) with tannic acid (TA) (2 g/L) produced the most physically and oxidatively stable oil-in-water emulsion compared with other groups in this study. This is because CP-TA (3/5) complex had the lowest zeta potential, the lowest the oil water interfacial tension, the highest viscosity and the highest content of TA with excellent antioxidant activity. Furthermore, this is because there was intense interaction between CP and TA in CP-TA complex from results of FTIR, XRD and ITC, which then result in the formation of large CP-TA particles.

Synergistic Interactions of Plant Protein Microgels and Cellulose Nanocrystals at the Interface and Their Inhibition of the Gastric Digestion of Pickering Emulsions

It is possible that Pickering emulsions can optimize the transport of nutraceuticals, pharmaceuticals, and other bioactive compounds in human physiology. So-called ultrastable Pickering emulsions are often destabilized in the gastric digestion regime if the particles are proteinaceous in nature. The present study seeks to test how the interfacial structure can be engineered via synergistic particle-particle interactions to impact the gastric coalescence of Pickering emulsions. In this study, we designed plant-based protein-particle-stabilized oil-in-water emulsions (PPM-E, with 20 wt % sunflower oil) via pea protein microgels (PPM at 1 wt %). The PPM hydrodynamic diameter is ∼250 nm. In vitro gastric digestion of PPM-E confirmed droplet coalescence within 30 min of pepsin addition. Supposedly surface-active cellulose nanocrystals (CNCs, 1-3 wt %) were added to PPM-E at pH 3.0 to determine if they could act as a barrier to interfacial pepsinolysis due to the CNC and PPM being oppositely charged at this gastric pH value. A combination of confocal microscopy, zeta potential, and Langmuir trough measurements suggested that CNCs and PPMs might form a combined layer at the O/W interface, owing to the electrostatic attraction between them. CNCs at >2 wt % inhibited the pepsinolyis of the adsorbed PPM film and thus droplet coalescence. However, increasing concentrations of CNC also increased the bulk viscosity of the PPM-E and eventually caused gelation of the emulsions, which would also delay their gastric breakdown. In conclusion, tuning the bulk and interfacial structure of Pickering emulsions via synergistic interactions between two types of particles could be an effective strategy to modify the enzymatic breakdown of such emulsions, which would have important applications in pharmaceuticals, foods, and other soft-matter applications.

Chitin nanofibers improve the stability and functional performance of Pickering emulsions formed from colloidal zein

There is growing interest in formulating Pickering emulsions from biopolymer particles due to consumer demand for more natural products. Protein-based colloidal particles can be used for this purpose, but they are prone to aggregate at pH values around their isoelectric point (pI), which limits their application. In this study, the possibility of using chitin nanofibers (ChNFs) to improve the pH stability of Pickering emulsions prepared from zein colloidal particles (ZCPs) was investigated. Initially, the morphology and interfacial properties of the complexes formed between ChNFs and ZCPs were studied as a function of pH (3-9). The tendency of the ZCPs to aggregate and sediment at pH ≥ pI was reduced in the presence of ChNFs, which was attributed to the formation of electrostatic complexes. The contact angle of the composite particles could be optimized by altering their composition. For instance, the contact angle increased from 74° for ZCPs to 85° for ZCP/ChNF (5:1 ratio) at pH 6, which improved their tendency to stabilize the oil droplets. Brewster angle microscopy indicated that ZCP/ChNF complexes had rod-like and/or particulate structures at an air-water interface, which were different from those observed in the bulk aqueous phase. Pickering emulsions formed from ZCP/ChNF complexes had better stability than those formed from ZCPs or ChNFs, especially when the pH was close to or greater than the pI. An in vitro digestion study showed that the presence of the interfacial complexes reduced the lipolysis of the oil droplets by about 11% in a simulated gastrointestinal tract. High internal phase Pickering emulsions (HIPPEs) could be formed from ZCP/ChNF complexes at pH ≥ pI, which were able to protect unsaturated lipids from oxidation. Overall, our results show that chitin nanofibers can be used to improve the pH stability of Pickering emulsions formed from colloidal zein, as well as to modulate their functional performance.

Impact of albumin corona on mucoadhesion and antimicrobial activity of carvacrol loaded chitosan nano-delivery systems under simulated gastro-intestinal conditions

Emerging antibiotic resistance in pathogens has posed considerable challenges to explore and examine the natural antimicrobials (NAMs). Due to the labile nature of NAMs, nano-delivery systems (NDS) are required to protect them from physiological degradation and allow controlled delivery to the targeted site of infection. In this study, corona modified NDS were developed using bovine serum albumin (BSA) on a chitosan core (CS) for sustained delivery of carvacrol (CAR), a natural antimicrobial agent, in the intestine. The optimal nano-formulations of the core (CS-NDS) and corona modified (BSA-CS-NDS) systems were fabricated with an average diameter of 52.4 ± 10.4 nm and 202.6 ± 6 nm, respectively. A shift in zeta-potential (ZP) from positive (+21 ± 3.6 mV) to negative values (-18 ± 2.6 mV) confirmed the electrostatic deposition of BSA corona on CS core. Under the influence of various simulated gastrointestinal conditions, BSA corona provided extra stability to NDS (ZP -38.5 mV), by ensuring delayed release and limited degradation in the gastric conditions. Mucoadhesive studies with quartz crystal microbalance with dissipation (QCM-D) revealed that BSA corona reduced the mucoadhesion of NDS at gastric pH, which enabled the effective delivery of CAR to the intestinal phase for successful eradication of Salmonella enterica.