Graded functionalization of biomaterial surfaces using mussel-inspired adhesive coating of polydopamine

Green-Synthesized Silver Nanoparticles in the Prevention of Multidrug-Resistant Proteus mirabilis Infection and Incrustation of Urinary Catheters BioAgNPs Against P. mirabilis Infection

This study aimed to assess the activity of AgNPs biosynthesized by Fusarium oxysporum (bio-AgNPs) against multidrug-resistant uropathogenic Proteus mirabilis, and to assess the antibacterial activity of catheters coated with bio-AgNPs. Broth microdilution and time-kill kinetics assays were used to determine the antibacterial activity of bio-AgNPs. Catheters were coated with two (2C) and three (3C) bio-AgNPs layers using polydopamine as crosslinker. Catheters were challenged with urine inoculated with P. mirabilis to assess the anti-incrustation activity. MIC was found to be 62.5 µmol l-1, causing total loss of viability after 4 h and bio-AgNPs inhibited biofilm formation by 76.4%. Catheters 2C and 3C avoided incrustation for 13 and 20 days, respectively, and reduced biofilm formation by more than 98%, while the pristine catheter was encrusted on the first day. These results provide evidence for the use of bio-AgNPs as a potential alternative to combat of multidrug-resistant P. mirabilis infections.

Polydopamine-coated biomimetic bone scaffolds loaded with exosomes promote osteogenic differentiation of BMSC and bone regeneration

Introduction

The repair of bone defects is ideally accomplished with bone tissue engineering. Recent studies have explored the possibility of functional modification of scaffolds in bone tissue engineering. We prepared an SF-CS-nHA (SCN) biomimetic bone scaffold and functionally modified the scaffold material by adding a polydopamine (PDA) coating loaded with exosomes (Exos) of marrow mesenchymal stem cells (BMSCs). The effects of the functional composite scaffold (SCN/PDA-Exo) on BMSC proliferation and osteogenic differentiation were investigated. Furthermore, the SCN/PDA-Exo scaffolds were implanted into animals to evaluate their effect on bone regeneration.

Methods

SCN biomimetic scaffolds were prepared by a vacuum freeze-drying/chemical crosslinking method. A PDA-functionalized coating loaded with BMSC-Exos was added by the surface coating method. The physical and chemical properties of the functional composite scaffolds were detected by scanning electron microscopy (SEM), energy spectrum analysis and contact angle tests. In vitro, BMSCs were inoculated on different scaffolds, and the Exo internalization by BMSCs was detected by confocal microscopy. The BMSC proliferation activity and cell morphology were detected by SEM, CCK-8 assays and phalloidin staining. BMSC osteogenic differentiation was detected by immunofluorescence, alizarin red staining and qRT‒PCR. In vivo, the functional composite scaffold was implanted into a rabbit critical radial defect model. Bone repair was detected by 3D-CT scanning. HE staining, Masson staining, and immunohistochemistry were used to evaluate bone regeneration.

Results

Compared with the SCN scaffold, the SCN/PDA-Exo-functionalized composite scaffold had a larger average surface roughness and stronger hydrophilicity. In vitro, the Exos immobilized on the SCN/PDA-Exo scaffolds were internalized by BMSCs. The BMSC morphology, proliferation ability and osteogenic differentiation effect in the SCN/PDA-Exo group were significantly better than those in the other control groups (p < 0.05). The effects of the SCN/PDA-Exo functional composite scaffold on bone defect repair and new bone formation were significantly better than those of the other control groups (p < 0.05).

Conclusions

In this study, we found that the SCN/PDA-Exo-functionalized composite scaffold promoted BMSC proliferation and osteogenic differentiation in vitro and improved bone regeneration efficiency in vivo. Therefore, combining Exos with biomimetic bone scaffolds by functional PDA coatings may be an effective strategy for functionally modifying biological scaffolds.

PDMS Micropatterns Coated with PDA and RGD Induce a Regulatory Macrophage-like Phenotype

Regulatory macrophages (Mreg) are a special cell type that present a potential therapeutic strategy for various inflammatory diseases. In vitro, Mreg generation mainly takes 7-10 days of treatment with chemicals, including cytokines. In the present study, we established a new approach for Mreg generation using a three-dimensional (3D) micropatterned polydimethylsiloxane (PDMS) surface coated with a natural biopolymer adhesive polydopamine (PDA) and the common cell adhesion peptide motif arginylglycylaspartic acid (RGD). The 3D PDMS surfaces were fabricated by photolithography and soft lithography techniques and were subsequently coated with an RGD+PDA mixture to form a surface that facilitates cell adhesion. Human monocytes (THP-1 cells) were cultured on different types of 2D or 3D micropatterns for four days, and the cell morphology, elongation, and Mreg marker expression were assessed using microscopic and flow cytometric analyses. The cells grown on the PDA+RGD-coated 3D micropatterns (20-µm width/20-µm space) exhibited the most elongated morphology and strongest expression levels of Mreg markers, such as CD163, CD206, CD209, CD274, MER-TK, TREM2, and DHRS9. The present study demonstrated that PDA+RGD-coated 3D PDMS micropatterns successfully induced Mreg-like cells from THP-1 cells within four days without the use of cytokines, suggesting a time- and cost-effective method to generate Mreg-like cells in vitro.

Electrospun Fibers Derived from Peptide Coupled Amphiphilic Copolymers for Dorsal Root Ganglion (DRG) Outgrowth

Developing scaffolds with appropriate mechanical/structural features as well as tunable bioactivities are indispensable in the field of tissue engineering. This study focused on one such attempt to electrospin the copolymer of L-lactic acid (L-LA) and functional monomer (3(S)- [(benzyloxycarbony)methyl]-1,4-dioxane-2,5-dione, BMD) with small peptide modifications for the purpose of neural tissue engineering. Scanning Electron Microscopy (SEM) micrographs showed fabricated electrospun copolymer as porous and uniform nanofibrous materials with diameter in the range of 800-1000 nm. In addition, the modified scaffolds displayed a lower contact angle than poly(L-lactide) (PLLA) indicating higher hydrophilicity. To further incorporate the bioactive functions, the nanofibers were chemically coupled with small peptide (isoleucine-lysine-valine-alanine-valine, IKVAV). The incorporation of IKVAV onto the electrospun fiber was confirmed by X-ray photoelectron spectroscopy (XPS) and such incorporation did not affect the surface morphology or fiber diameters. To demonstrate the potential of applying the designed scaffolds for nerve regeneration, dorsal root ganglion (DRG) neurons were cultured on the nanofibers to examine the impact on neurite outgrowth of DRGs. The results indicated that the fabricated nanofibrous matrix with small peptide might be a potential candidate for neural tissue engineering.

Recent Advances in Antiinflammatory Material Design

Implants and prostheses are widely used to replace damaged tissues or to treat various diseases. However, besides the risk of bacterial or fungal infection, an inflammatory response usually occurs. Here, recent progress in the field of anti-inflammatory biomaterials is described. Different materials and approaches are used to decrease the inflammatory response, including hydrogels, nanoparticles, implant surface coating by polymers, and a variety of systems for anti-inflammatory drug delivery. Complex multifunctional systems dealing with inflammation, microbial infection, bone regeneration, or angiogenesis are also described. New promising stimuli-responsive systems, such as pH- and temperature-responsive materials, are also being developed that would enable an "intelligent" antiinflammatory response when the inflammation occurs. Together, different approaches hold promise for creation of novel multifunctional smart materials allowing better implant integration and tissue regeneration.

Surface Modification Techniques for Endothelial Cell Seeding in PDMS Microfluidic Devices

Microfluidic lab-on-a-chip cell culture techniques have been gaining popularity by offering the possibility of reducing the amount of samples and reagents and greater control over cellular microenvironment. Polydimethylsiloxane (PDMS) is the commonly used polymer for microfluidic cell culture devices because of the cheap and easy fabrication techniques, non-toxicity, biocompatibility, high gas permeability, and optical transparency. However, the intrinsic hydrophobic nature of PDMS makes cell seeding challenging when applied on PDMS surface. The hydrophobicity of the PDMS surface also allows the non-specific absorption/adsorption of small molecules and biomolecules that might affect the cellular behaviour and functions. Hydrophilic modification of PDMS surface is indispensable for successful cell seeding. This review collates different techniques with their advantages and disadvantages that have been used to improve PDMS hydrophilicity to facilitate endothelial cells seeding in PDMS devices.

Biomimetic vs. Direct Approach to Deposit Hydroxyapatite on the Surface of Low Melting Point Polymers for Tissue Engineering

Polymers are widely used in many applications in the field of biomedical engineering. Among eclectic selections of polymers, those with low melting temperature (T_m < 200 °C), such as poly(methyl methacrylate), poly(lactic-co-glycolic acid), or polyethylene, are often used in bone, dental, maxillofacial, and corneal tissue engineering as substrates or scaffolds. These polymers, however, are bioinert, have a lack of reactive surface functional groups, and have poor wettability, affecting their ability to promote cellular functions and biointegration with the surrounding tissue. Improving the biointegration can be achieved by depositing hydroxyapatite (HAp) on the polymeric substrates. Conventional thermal spray and vapor phase coating, including the Food and Drug Administration (FDA)-approved plasma spray technique, is not suitable for application on the low T_m polymers due to the high processing temperature, reaching more than 1000 °C. Two non-thermal HAp coating approaches have been described in the literature, namely, the biomimetic deposition and direct nanoparticle immobilization techniques. In the current review, we elaborate on the unique features of each technique, followed by discussing the advantages and disadvantages of each technique to help readers decide on which method is more suitable for their intended applications. Finally, the future perspectives of the non-thermal HAp coating are given in the conclusion.

Chitosan/polydopamine layer by layer self-assembled silk fibroin nanofibers for biomedical applications

Silk fibroin (SF) is increasingly needed in tissue engineering for its superior biocompatibility. However, the practical applications of pure SF biomaterials confront bacterial infection problems. In this study, chitosan (CS) and polydopamine (PDA) were introduced into electrospun nanofibrous SF mats through layer-by-layer self-assembly (LBL) to obtain enhanced antibacterial ability and cytocompatibility. The surface morphology and composition analysis confirmed the successful deposition. After depositing 15 bilayers, the tensile modulus of the mats in wet condition increased from 2.16 MPa (pristine SF mats) to 4.89 MPa. A trend towards better hydrophilicity performance was also recorded with more bilayers coating on the mats. Besides, LBL structured mats showed improved antibacterial ability of more than 98 % against E. coli and S. aureus. In addition, advancement in biocompatibility was observed during the proliferation experiment of L929 cells. Overall, the deposition of CS and PDA may further expand the use of SF in biomedical field.

Recent progress in synthesis and application of mussel-inspired adhesives

The rapid and robust adhesion of marine mussels to diverse solid surfaces in wet environments is mediated by the secreted mussel adhesive proteins which are abundant in a catecholic amino acid, l-3,4-dihydroxyphenylalanine (Dopa). Over the last two decades, enormous efforts have been devoted to the development of synthetic mussel-inspired adhesives with water-resistant adhesion and cohesion properties by modifying polymer systems with Dopa and its analogues. In the present review, an overview of the unique features of various mussel foot proteins is provided in combination with an up-to-date understanding of catechol chemistry, which contributes to the strong interfacial binding via balancing a variety of covalent and noncovalent interactions including oxidative cross-linking, electrostatic interaction, metal-catechol coordination, hydrogen bonding, hydrophobic interactions and π-π/cation-π interactions. The recent developments of novel Dopa-containing adhesives with on-demand mechanical properties and other functionalities are then summarized under four broad categories: viscous coacervated adhesives, soft adhesive hydrogels, smart adhesives, and stiff adhesive polyesters, where their emerging applications in engineering, biological and biomedical fields are discussed. Limitations of the developed adhesives are identified and future research perspectives in this field are proposed.

Polydopamine-Assisted Immobilization of Chitosan Brushes on a Textured CoCrMo Alloy to Improve its Tribology and Biocompatibility

Due to their bioinert and reliable tribological performance, cobalt chromium molybdenum (CoCrMo) alloys have been widely used for articular joint implant applications. However, friction and wear issues are still the main reasons for the failure of implants. As a result, the improvement of the tribological properties and biocompatibility of these alloys is still needed. Thus, surface modification is of great interest for implant manufacturers and for clinical applications. In this study, a strategy combining laser surface texturing and chitosan grafting (mussel inspired) was used to improve the tribological and biocompatible behaviors of CoCrMo. The microstructure and chemical composition were investigated by atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. The tribological properties were discussed to determine their synergistic effects. To evaluate their biocompatibility, osteoblast cells were cocultured with the modified surface. The results show that there is a distinct synergistic effect between laser surface texturing and polymer brushes for improving tribological behaviors and biocompatibility. The prepared chitosan brushes on a textured surface are a strong mechanism for reducing friction force. The dimples took part in the hydrodynamic lubrication and acted as the container for replenishing the consumed lubricants. These brushes also promote the formation of a local lubricating film. The wear resistance of the chitosan brushes was immensely improved. Further, the worn process was observed, and the mechanism of destruction was demonstrated. Co-culturing with osteoblast cells showed that the texture and grafting have potential applications in enhancing the differentiation and orientation of osteoblast cells.

Engineering biological gradients

Biological gradients profoundly influence many cellular activities, such as adhesion, migration, and differentiation, which are the key to biological processes, such as inflammation, remodeling, and tissue regeneration. Thus, engineered structures containing bioinspired gradients can not only support a better understanding of these phenomena, but also guide and improve the current limits of regenerative medicine. In this review, we outline the challenges behind the engineering of devices containing chemical-physical and biomolecular gradients, classifying them according to gradient-making methods and the finalities of the systems. Different manufacturing processes can generate gradients in either in-vitro systems or scaffolds, which are suitable tools for the study of cellular behavior and for regenerative medicine; within these, rapid prototyping techniques may have a huge impact on the controlled production of gradients. The parallel need to develop characterization techniques is addressed, underlining advantages and weaknesses in the analysis of both chemical and physical gradients.

Construction of novel temperature-responsive hydrogel culture system based on the biomimetic method for stem cell sheet harvest

Temperature-responsive hydrogel culture system is considered as an ideal platform for cell sheet harvest, but its complex preparation methods and harsh reaction conditions limit its application. Inspired by the marine mussels, a biomimetic method presented here is to construct a novel temperature-responsive hydrogel culture system for stem cell sheet harvest. The tissue culture polystyrene is first modified with polydopamine coating, and then amine-terminated poly(N-isopropylacrylamide) is grafted onto the coating via the Schiff base or Michael addition reaction to construct the temperature-sensitive hydrogel culture system. Then, bone marrow stromal cells are cultured on the culture system to construct cell sheets. The prepared culture system shows significant temperature-sensitive property with the grafted concentrations of poly(N-isopropylacrylamide) ranging from 0.5 to 1 g/L. Meanwhile, the constructed culture system has low cytotoxicity and facilitates the stem cell adhesion, proliferation, and cell sheet formation at 37°C. When the culture system is placed in a 20°C environment, the cell sheet can be completely detached from the surface of tissue culture polystyrene without being treated with any enzymes. More importantly, the cell morphology, cell sheet thickness, and the fibril structure of the associated proteins are similar to the cells cultured on the tissue culture polystyrene without modification. The biomimetic, simple, inexpensive, and environmentally friendly preparation of the culture system enables it to be used for the harvest of cell sheet and even applied to tissue engineering for tissue regeneration.

Harnessing biochemical and structural cues for tenogenic differentiation of adipose derived stem cells (ADSCs) and development of an in vitro tissue interface mimicking tendon-bone insertion graft

Tendon-bone interface tissue is extremely challenging to engineer because it exhibits complex gradients of structure, composition, biologics, and cellular phenotypes. As a step toward engineering these transitional zones, we initially analyzed how different (topographical or biological) cues affect tenogenic differentiation of adipose-derived stem cells (ADSCs). We immobilized platelet-derived growth factor - BB (PDGF-BB) using polydopamine (PD) chemistry on random and aligned nanofibers and investigated ADSC proliferation and tenogenic differentiation. Immobilized PDGF greatly enhanced the proliferation and tenogenic differentiation of ADSCs; however, nanofiber alignment had no effect. Interestingly, the PDGF immobilized aligned nanofiber group showed a synergistic effect with maximum expression of tenogenic markers for 14 days. We also generated a nanofiber surface with spatially controlled presentation of immobilized PDGF on an aligned architecture, mimicking native tendon tissue. A gradient of immobilized PDGF was able to control the phenotypic differentiation of ADSCs into tenocytes in a spatially controlled manner, as confirmed by analysis of the expression of tenogenic markers and immunofluorescence staining. We further explored the gradient formation strategy by generation of a symmetrical gradient on the nanofiber surface for the generation of a structure mimicking bone-patellar-tendon-bone with provision for gradient immobilization of PDGF and controlled mineralization. Our study reveals that, together with biochemical cues, favorable topographical cues are important for tenogenic differentiation of ADSCs, and gradient presentation of PDGF can be used as a tool for engineering stem cell-based bone-tendon interface tissues.

Mussel-Inspired Biomaterials for Cell and Tissue Engineering

In designing biomaterial for regenerative medicine or tissue engineering, there are a variety of issues to consider including biocompatibility, biochemical reactivity, and cellular interaction etc. Mussel-inspired biomaterials have received much attention because of its appealing features including strong adhesiveness on moist surfaces, enhancement of cell adhesion, immobilization of bioactive molecules and its amenability to post-functionalization via catechol chemistry. In this review chapter, we give a brief introduction on the basic principles of mussel-inspired polydopamine coating, catechol conjugation, and discuss how their features play a vital role in biomedical application. Special emphasis is placed on tissue engineering and regenerative applications. We aspire to give readers of this book a comprehensive insight into mussel-inspired biomaterials that can facilitate them make significant contributions in this promising field.

Bone biomaterials and interactions with stem cells

Bone biomaterials play a vital role in bone repair by providing the necessary substrate for cell adhesion, proliferation, and differentiation and by modulating cell activity and function. In past decades, extensive efforts have been devoted to developing bone biomaterials with a focus on the following issues: (1) developing ideal biomaterials with a combination of suitable biological and mechanical properties; (2) constructing a cell microenvironment with pores ranging in size from nanoscale to submicro- and microscale; and (3) inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Here we present a comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells. Typical bone biomaterials that have been developed, including bioactive ceramics, biodegradable polymers, and biodegradable metals, are reviewed, with an emphasis on their characteristics and applications. The necessary porous structure of bone biomaterials for the cell microenvironment is discussed, along with the corresponding fabrication methods. Additionally, the promising seed stem cells for bone repair are summarized, and their interaction mechanisms with bone biomaterials are discussed in detail. Special attention has been paid to the signaling pathways involved in the focal adhesion and osteogenic differentiation of stem cells on bone biomaterials. Finally, achievements regarding bone biomaterials are summarized, and future research directions are proposed.