1
|
Peng S, Cui G, Li J, Li F, Ji M, Zhang C, Meng T, Li J, Man J. Combined role of stearic acid and maleic anhydride in the development of thermoplastic starch-based materials with ultrahigh ductility and durability. Carbohydr Polym 2024; 339:122296. [PMID: 38823896 DOI: 10.1016/j.carbpol.2024.122296] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Revised: 04/30/2024] [Accepted: 05/18/2024] [Indexed: 06/03/2024]
Abstract
The diverse properties reported for starch-based materials indicate their potential for use in the preparation of biodegradable flexible actuators. However, their natural brittleness and lack of durability after modification limit their practical application. Therefore, we propose a strategy for preparing flexible starch-based composites. The results of macro/micro property characterizations and molecular dynamics simulations indicated that using starch, maleic anhydride, and stearic acid (SA), the mobility of the starch chains was enhanced and retrogradation was inhibited through the synergistic effects induced by chain breaking, complex formation with SA, and esterification of the starch molecules. In addition, the elongation at break of the modified starch (MS) reached 2070 %, and considerable ductility (>1000 %) as well as well-complexed structure were maintained after six months. Furthermore, the MS was able to undergo self-healing after fracture or a temperature-controlled stiffness transition. Moreover, it underwent complete degradation in soil within 30 d. Finally, an actuator was prepared by doping the MS with nano-Fe3O4 particles to realize a dual magnetic and optical response. Dynamic monitoring was also achieved based on the electrical signal, thereby demonstrating the broad application scope of this material in the development of biodegradable flexible actuators.
Collapse
Affiliation(s)
- Sixian Peng
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Guanghui Cui
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Jianfeng Li
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China.
| | - Fangyi Li
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Maocheng Ji
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Chuanwei Zhang
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
| | - Tianshuo Meng
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Jianyong Li
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China.
| | - Jia Man
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China.
| |
Collapse
|
2
|
Li Y, Wang S, Qian S, Liu Z, Weng Y, Zhang Y. Depolymerization and Re/Upcycling of Biodegradable PLA Plastics. ACS OMEGA 2024; 9:13509-13521. [PMID: 38559974 PMCID: PMC10976375 DOI: 10.1021/acsomega.3c08674] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/06/2023] [Revised: 02/18/2024] [Accepted: 02/23/2024] [Indexed: 04/04/2024]
Abstract
With the escalating utilization of plastic products, global attention has been increasingly drawn to environmental pollution and recycling challenges stemming from plastic waste. Against this backdrop, biodegradable plastics have emerged as viable alternatives owing to their sustainability and capacity for biodegradation. Polylactic acid (PLA) presently commands the largest market share among biodegradable plastics, finding extensive application in products such as thin films, medical materials, and biodegradable straws. However, the widespread adoption of PLA is hindered by challenges such as high cost, low recycling rates, and complete degradation to H2O and CO2 in natural conditions. Therefore, it is imperative and time-sensitive to explore solutions for the depolymerization and re/upcycling of PLA waste plastics. This review comprehensively outlines the current landscape of PLA recycling methods, emphasizing the advantages and significance of chemical re/upcycling. The subsequent exploration encompasses recent breakthroughs and technical obstacles inherent in diverse chemical depolymerization methods. Ultimately, this review accentuates the impediments and forthcoming possibilities in the realm of PLA plastics, emphasizing the pursuit of closed-loop recycling and upcycling.
Collapse
Affiliation(s)
- YingChao Li
- College of Chemistry and
Chemical Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
| | - Shuai Wang
- College of Chemistry and
Chemical Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
| | - Song Qian
- College of Chemistry and
Chemical Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
| | - Zhijie Liu
- College of Chemistry and
Chemical Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
| | - Yujing Weng
- College of Chemistry and
Chemical Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
| | - Yulong Zhang
- College of Chemistry and
Chemical Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
| |
Collapse
|
3
|
Furgier V, Root A, Heinmaa I, Zamani A, Åkesson D. Development and Characterisation of Composites Prepared from PHBV Compounded with Organic Waste Reinforcements, and Their Soil Biodegradation. MATERIALS (BASEL, SWITZERLAND) 2024; 17:768. [PMID: 38592008 PMCID: PMC10856691 DOI: 10.3390/ma17030768] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2024] [Revised: 02/01/2024] [Accepted: 02/01/2024] [Indexed: 04/10/2024]
Abstract
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biobased and biodegradable polymer. This polymer is considered promising, but it is also rather expensive. The objective of this study was to compound PHBV with three different organic fillers considered waste: human hair waste (HHW), sawdust (SD) and chitin from shrimp shells. Thus, the cost of the biopolymer is reduced, and, at the same time, waste materials are valorised into something useful. The composites prepared were characterised by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), tensile strength and scanning electron micrograph (SEM). Tests showed that chitin and HHW did not have a reinforcing effect on tensile strength while the SD increased the tensile strength at break to a certain degree. The biodegradation of the different composites was evaluated by a soil burial test for five months. The gravimetric test showed that neat PHBV was moderately degraded (about 5% weight loss) while reinforcing the polymer with organic waste clearly improved the biodegradation. The strongest biodegradation was achieved when the biopolymer was compounded with HHW (35% weight loss). The strong biodegradation of HHW was further demonstrated by characterisation by Fourier-transform infrared spectroscopy (FTIR) and solid-state nuclear magnetic resonance (NMR). Characterisation by SEM showed that the surfaces of the biodegraded samples were eroded.
Collapse
Affiliation(s)
- Valentin Furgier
- Swedish Centre for Resource Recovery, University of Borås, 501 90 Borås, Sweden; (V.F.); (A.Z.)
| | - Andrew Root
- MagSol, Tuhkanummenkuja 2, 00970 Helsinki, Finland;
| | - Ivo Heinmaa
- National Institute of Chemical Physics and Biophysics, 12618 Tallinn, Estonia;
| | - Akram Zamani
- Swedish Centre for Resource Recovery, University of Borås, 501 90 Borås, Sweden; (V.F.); (A.Z.)
| | - Dan Åkesson
- Swedish Centre for Resource Recovery, University of Borås, 501 90 Borås, Sweden; (V.F.); (A.Z.)
| |
Collapse
|
4
|
Trotta F, Da Silva S, Massironi A, Mirpoor SF, Lignou S, Ghawi SK, Charalampopoulos D. Silver Bionanocomposites as Active Food Packaging: Recent Advances & Future Trends Tackling the Food Waste Crisis. Polymers (Basel) 2023; 15:4243. [PMID: 37959923 PMCID: PMC10650736 DOI: 10.3390/polym15214243] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2023] [Revised: 10/24/2023] [Accepted: 10/25/2023] [Indexed: 11/15/2023] Open
Abstract
Food waste is a pressing global challenge leading to over $1 trillion lost annually and contributing up to 10% of global greenhouse gas emissions. Extensive study has been directed toward the use of active biodegradable packaging materials to improve food quality, minimize plastic use, and encourage sustainable packaging technology development. However, this has been achieved with limited success, which can mainly be attributed to poor material properties and high production costs. In the recent literature, the integration of silver nanoparticles (AgNPs) has shown to improve the properties of biopolymer, prompting the development of bionanocomposites. Furthermore, the antibacterial properties of AgNPs against foodborne pathogens leads towards food shelf-life improvement and provides a route towards reducing food waste. However, few reviews have analyzed AgNPs holistically throughout a portfolio of biopolymers from an industrial perspective. Hence, this review critically analyses the antibacterial, barrier, mechanical, thermal, and water resistance properties of AgNP-based bionanocomposites. These advanced materials are also discussed in terms of food packaging applications and assessed in terms of their performance in enhancing food shelf-life. Finally, the current barriers towards the commercialization of AgNP bionanocomposites are critically discussed to provide an industrial action plan towards the development of sustainable packaging materials to reduce food waste.
Collapse
Affiliation(s)
- Federico Trotta
- Metalchemy Limited., 71-75 Shelton Street, London WC2H 9JQ, UK; (S.D.S.); (A.M.)
| | - Sidonio Da Silva
- Metalchemy Limited., 71-75 Shelton Street, London WC2H 9JQ, UK; (S.D.S.); (A.M.)
| | - Alessio Massironi
- Metalchemy Limited., 71-75 Shelton Street, London WC2H 9JQ, UK; (S.D.S.); (A.M.)
| | - Seyedeh Fatemeh Mirpoor
- Department of Food and Nutritional Sciences, University of Reading, P.O. Box 226, Whiteknights, Reading RG6 6AP, UK (S.L.); (S.K.G.); (D.C.)
| | - Stella Lignou
- Department of Food and Nutritional Sciences, University of Reading, P.O. Box 226, Whiteknights, Reading RG6 6AP, UK (S.L.); (S.K.G.); (D.C.)
| | - Sameer Khalil Ghawi
- Department of Food and Nutritional Sciences, University of Reading, P.O. Box 226, Whiteknights, Reading RG6 6AP, UK (S.L.); (S.K.G.); (D.C.)
| | - Dimitris Charalampopoulos
- Department of Food and Nutritional Sciences, University of Reading, P.O. Box 226, Whiteknights, Reading RG6 6AP, UK (S.L.); (S.K.G.); (D.C.)
| |
Collapse
|
5
|
Zhang L, You H, Chen J, Huang B, Cui Y, Hossain KB, Chen Q, Cai M, Qian Q. Surface structures changes and biofilm communities development of degradable plastics during aging in coastal seawater. MARINE POLLUTION BULLETIN 2023; 193:114996. [PMID: 37301614 DOI: 10.1016/j.marpolbul.2023.114996] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2023] [Revised: 04/17/2023] [Accepted: 04/25/2023] [Indexed: 06/12/2023]
Abstract
Biodegradable plastics (BPs) are a suitable alternative to conventional plastics. Still, their excessive or unplanned use may disrupt the abundance and community structure of the microbial population. To this end, a 58-day experiment in which biodegradable plastic objects, such as bags and boxes, were exposed to near-coastal seawater was conducted. They also assessed how they affected the diversity and organization of bacterial populations in seawater and on the surface of BPs products. It is evident that after the exposure time, both BP's bag and box products deteriorate in the ocean to varying degrees. The results of high-throughput sequencing of bacterial communities in seawater and those colonized on BPs products reveal significant differences in microbial community structures between seawater and BPs plastic samples. These suggest that the degradation of biodegradable plastics is shadowed by microorganisms and exposure time, while BP products influence the structural characteristics of microbial communities.
Collapse
Affiliation(s)
- Lin Zhang
- College of Environmental and Resource Sciences, College of Carbon Neutral Modern Industry, Fujian Normal University, Fuzhou 350117, China; Engineering Research Center of Polymer Green Recycling of Ministry of Education, Fujian Normal University, Fuzhou 350117, China
| | - Huimin You
- State Key Laboratory of Marine Environmental Science, Xiamen University, Xiamen 361102, China; Coastal and Ocean Management Institute, Xiamen University, Xiamen 361102, China; College of Environment and Ecology, Xiamen University, Xiamen 361102, China
| | - Jianfei Chen
- College of Environmental and Resource Sciences, College of Carbon Neutral Modern Industry, Fujian Normal University, Fuzhou 350117, China; Engineering Research Center of Polymer Green Recycling of Ministry of Education, Fujian Normal University, Fuzhou 350117, China
| | - Baoquan Huang
- College of Environmental and Resource Sciences, College of Carbon Neutral Modern Industry, Fujian Normal University, Fuzhou 350117, China; Engineering Research Center of Polymer Green Recycling of Ministry of Education, Fujian Normal University, Fuzhou 350117, China
| | - Yaozong Cui
- College of Ocean and Earth Sciences, Xiamen University, Xiamen 361102, China
| | - Kazi Belayet Hossain
- State Key Laboratory of Marine Environmental Science, Xiamen University, Xiamen 361102, China; Coastal and Ocean Management Institute, Xiamen University, Xiamen 361102, China; College of Environment and Ecology, Xiamen University, Xiamen 361102, China
| | - Qinghua Chen
- College of Environmental and Resource Sciences, College of Carbon Neutral Modern Industry, Fujian Normal University, Fuzhou 350117, China; Engineering Research Center of Polymer Green Recycling of Ministry of Education, Fujian Normal University, Fuzhou 350117, China
| | - Minggang Cai
- State Key Laboratory of Marine Environmental Science, Xiamen University, Xiamen 361102, China; Coastal and Ocean Management Institute, Xiamen University, Xiamen 361102, China; College of Ocean and Earth Sciences, Xiamen University, Xiamen 361102, China; Fujian Provincial Key Laboratory for Coastal Ecology and Environmental Studies, Xiamen University, Xiamen 361102, China.
| | - Qingrong Qian
- College of Environmental and Resource Sciences, College of Carbon Neutral Modern Industry, Fujian Normal University, Fuzhou 350117, China; Engineering Research Center of Polymer Green Recycling of Ministry of Education, Fujian Normal University, Fuzhou 350117, China.
| |
Collapse
|
6
|
Feijoo P, Marín A, Samaniego-Aguilar K, Sánchez-Safont E, Lagarón JM, Gámez-Pérez J, Cabedo L. Effect of the Presence of Lignin from Woodflour on the Compostability of PHA-Based Biocomposites: Disintegration, Biodegradation and Microbial Dynamics. Polymers (Basel) 2023; 15:polym15112481. [PMID: 37299280 DOI: 10.3390/polym15112481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Revised: 05/01/2023] [Accepted: 05/16/2023] [Indexed: 06/12/2023] Open
Abstract
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has gained attention as a possible substitute for conventional polymers that could be integrated into the organic recycling system. Biocomposites with 15% of pure cellulose (TC) and woodflour (WF) were prepared to analyze the role of lignin on their compostability (58 °C) by tracking the mass loss, CO2 evolution, and the microbial population. Realistic dimensions for typical plastic products (400 µm films), as well as their service performance (thermal stability, rheology), were taken into account in this hybrid study. WF showed lower adhesion with the polymer than TC and favored PHBV thermal degradation during processing, also affecting its rheological behavior. Although all materials disintegrated in 45 days and mineralized in less than 60 days, lignin from woodflour was found to slow down the bioassimilation of PHBV/WF by limiting the access of enzymes and water to easier degradable cellulose and polymer matrix. According to the highest and the lowest weight loss rates, TC incorporation allowed for higher mesophilic bacterial and fungal counts, while WF seemed to hinder fungal growth. At the initial steps, fungi and yeasts seem to be key factors in facilitating the later metabolization of the materials by bacteria.
Collapse
Affiliation(s)
- Patricia Feijoo
- Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain
| | - Anna Marín
- Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain
| | - Kerly Samaniego-Aguilar
- Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain
| | - Estefanía Sánchez-Safont
- Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain
| | - José M Lagarón
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish National Research Council (CSIC), Calle Catedrático Agustín Escardino Benlloch 7, 46980 Paterna, Spain
| | - José Gámez-Pérez
- Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain
| | - Luis Cabedo
- Polymers and Advanced Materials Group (PIMA), Universitat Jaume I (UJI), Avenida de Vicent Sos Baynat s/n, 12071 Castelló de la Plana, Spain
| |
Collapse
|
7
|
Bartolucci L, Cordiner S, De Maina E, Kumar G, Mele P, Mulone V, Igliński B, Piechota G. Sustainable Valorization of Bioplastic Waste: A Review on Effective Recycling Routes for the Most Widely Used Biopolymers. Int J Mol Sci 2023; 24:ijms24097696. [PMID: 37175402 PMCID: PMC10178466 DOI: 10.3390/ijms24097696] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/09/2023] [Revised: 04/15/2023] [Accepted: 04/18/2023] [Indexed: 05/15/2023] Open
Abstract
Plastics-based materials have a high carbon footprint, and their disposal is a considerable problem for the environment. Biodegradable bioplastics represent an alternative on which most countries have focused their attention to replace of conventional plastics in various sectors, among which food packaging is the most significant one. The evaluation of the optimal end-of-life process for bioplastic waste is of great importance for their sustainable use. In this review, the advantages and limits of different waste management routes-biodegradation, mechanical recycling and thermal degradation processes-are presented for the most common categories of biopolymers on the market, including starch-based bioplastics, PLA and PBAT. The analysis outlines that starch-based bioplastics, unless blended with other biopolymers, exhibit good biodegradation rates and are suitable for disposal by composting, while PLA and PBAT are incompatible with this process and require alternative strategies. The thermal degradation process is very promising for chemical recycling, enabling building blocks and the recovery of valuable chemicals from bioplastic waste, according to the principles of a sustainable and circular economy. Nevertheless, only a few articles have focused on this recycling process, highlighting the need for research to fully exploit the potentiality of this waste management route.
Collapse
Affiliation(s)
- Lorenzo Bartolucci
- Industrial Engineering Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy
| | - Stefano Cordiner
- Industrial Engineering Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy
| | - Emanuele De Maina
- Industrial Engineering Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy
| | - Gopalakrishnan Kumar
- Institute of Chemistry, Bioscience and Environmental Engineering, Faculty of Science and Technology, University of Stavanger, 4036 Stavanger, Norway
| | - Pietro Mele
- Industrial Engineering Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy
| | - Vincenzo Mulone
- Industrial Engineering Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy
| | - Bartłomiej Igliński
- Faculty of Chemistry, Nicolaus Copernicus University in Toruń, Gagarina 7, 87-100 Toruń, Poland
| | - Grzegorz Piechota
- GPCHEM, Laboratory of Biogas Research and Analysis, Legionów 40a/3, 87-100 Toruń, Poland
| |
Collapse
|
8
|
Zhai J, Zhang C, Zhao C, Yang W. Preparation of Slow-Release Coated Urea Based on C8-Maleic Anhydride Copolymer-Cured Epoxidized Soybean Oil. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c01968] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Jiaxin Zhai
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing100029, China
| | - Chen Zhang
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing100029, China
| | - Changwen Zhao
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing100029, China
- Beijing Laboratory of Biomedical Materials, Beijing University of Chemical Technology, Beijing100029, China
- Key Laboratory of Biomedical Materials of Natural Macromolecules, Ministry of Education Beijing, Beijing University of Chemical Technology, Beijing100029, China
| | - Wantai Yang
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing100029, China
- Beijing Laboratory of Biomedical Materials, Beijing University of Chemical Technology, Beijing100029, China
- Key Laboratory of Biomedical Materials of Natural Macromolecules, Ministry of Education Beijing, Beijing University of Chemical Technology, Beijing100029, China
| |
Collapse
|
9
|
Ramezani Dana H, Ebrahimi F. Synthesis, properties, and applications of polylactic
acid‐based
polymers. POLYM ENG SCI 2022. [DOI: 10.1002/pen.26193] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Hossein Ramezani Dana
- Mechanics, Surfaces and Materials Processing (MSMP) – EA 7350 Arts et Metiers Institute of Technology Aix‐en‐Provence France
- Texas A&M Engineering Experiment Station (TEES) Texas A&M University College Station Texas USA
| | - Farnoosh Ebrahimi
- PRISM Polymer, Recycling, Industrial, Sustainability and Manufacturing Technological University of the Shannon (TUS) Athlone Ireland
| |
Collapse
|
10
|
Sun Y, Zheng Z, Wang Y, Yang B, Wang J, Mu W. PLA composites reinforced with rice residues or glass fiber—a review of mechanical properties, thermal properties, and biodegradation properties. JOURNAL OF POLYMER RESEARCH 2022. [DOI: 10.1007/s10965-022-03274-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/14/2022]
|
11
|
Comparative study on mechanical properties of virgin and recycled polylactic acid aging in natural weathering and seawater environment. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-021-03756-0] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
12
|
Sun Y, Wang Y, Mu W, Zheng Z, Yang B, Wang J, Zhang R, Zhou K, Chen L, Ying J, Liu X, Xu G. Mechanical properties of
3D
printed micro‐nano rice husk/polylactic acid filaments. J Appl Polym Sci 2022. [DOI: 10.1002/app.52619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Yufeng Sun
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Yapeng Wang
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Wenlong Mu
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Zipeng Zheng
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Bin Yang
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Jinwei Wang
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Runkai Zhang
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Kaiyuan Zhou
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Liang Chen
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Jilai Ying
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Xinping Liu
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| | - Guangyin Xu
- Henan Engineering Laboratory of Agricultural Products Cold Chain Logistics Information and Equipment Technology Henan Agricultural University Zhengzhou China
| |
Collapse
|
13
|
Parida M, Shajkumar A, Mohanty S, Biswal M, Nayak SK. Poly(lactic acid) (PLA)-based mulch films: evaluation of mechanical, thermal, barrier properties and aerobic biodegradation characteristics in real-time environment. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-022-04203-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
14
|
Photo-oxidative resistance and adjustable degradation of poly-lactic acid (PLA) obtained by biomass addition and interfacial construction. Polym Degrad Stab 2021. [DOI: 10.1016/j.polymdegradstab.2021.109762] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
15
|
Lee D, Sun Y, Youe W, Gwon J, Cheng HN, Wu Q. 3D‐printed wood‐polylactic acid‐thermoplastic
starch composites: Performance features in relation to biodegradation treatment. J Appl Polym Sci 2021. [DOI: 10.1002/app.50914] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Danbee Lee
- School of Renewable Natural Resources Louisiana State University AgCenter Baton Rouge Louisiana USA
| | - Yufeng Sun
- School of Renewable Natural Resources Louisiana State University AgCenter Baton Rouge Louisiana USA
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
| | - Won‐Jae Youe
- Forest Products Department National Institute of Forest Science Seoul South Korea
| | - Jaegyoung Gwon
- Forest Products Department National Institute of Forest Science Seoul South Korea
| | - Huai N. Cheng
- Southern Regional Research Center USDA Agriculture Research Service New Orleans Louisiana USA
| | - Qinglin Wu
- School of Renewable Natural Resources Louisiana State University AgCenter Baton Rouge Louisiana USA
| |
Collapse
|
16
|
Rosli NA, Karamanlioglu M, Kargarzadeh H, Ahmad I. Comprehensive exploration of natural degradation of poly(lactic acid) blends in various degradation media: A review. Int J Biol Macromol 2021; 187:732-741. [PMID: 34358596 DOI: 10.1016/j.ijbiomac.2021.07.196] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2021] [Revised: 07/22/2021] [Accepted: 07/30/2021] [Indexed: 11/25/2022]
Abstract
Poly(lactic acid) (PLA), a bio-based polyester, has been extensively investigated in the recent past owing to its excellent mechanical properties. Several studies have been conducted on PLA blends, with a focus on improving the brittleness of PLA to ensure its suitability for various applications. However, the increasing use of PLA has increased the contamination of PLA-based products in the environment because PLA remains intact even after three years at sea or in soil. This review focuses on analyzing studies that have worked on improving the degradation properties of PLA blends and studies how other additives affect degradation by considering different degradation media. Factors affecting the degradation properties, such as surface morphology, water uptake, and crystallinity of PLA blends, are highlighted. In natural, biotic, and abiotic media, water uptake plays a crucial role in determining biodegradation rates. Immiscible blends of PLA with other polymer matrices cause phase separation, increasing the water absorption. The susceptibility of PLA to hydrolytic and enzymatic degradation is high in the amorphous region because it can be easily penetrated by water. It is essential to study the morphology, water absorption, and structural properties of PLA blends to predict the biodegradation properties of PLA in the blends.
Collapse
Affiliation(s)
- Noor Afizah Rosli
- Department of Chemical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
| | - Mehlika Karamanlioglu
- Biomedical Engineering Department, Faculty of Engineering and Architecture, Istanbul Gelisim University, 34310, Istanbul, Turkey
| | - Hanieh Kargarzadeh
- Center of Molecular and Macromolecular Studies, Polish Academy of Sciences, Sienkiewicza, 112, 90-363 Lodz, Poland
| | - Ishak Ahmad
- Department of Chemical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia.
| |
Collapse
|
17
|
Ebrahimi F, Ramezani Dana H. Poly lactic acid (PLA) polymers: from properties to biomedical applications. INT J POLYM MATER PO 2021. [DOI: 10.1080/00914037.2021.1944140] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Affiliation(s)
- Farnoosh Ebrahimi
- Materials Research Institute, Athlone Institute of Technology, Athlone, Ireland
| | - Hossein Ramezani Dana
- Laboratoire de Mécanique, Surface, Matériaux Procédés (MSMP) – EA 7350, Arts et Metiers Institute of Technology, HESAM Université, Aix-en-Provence, France
- Texas A&M Engineering Experiment Station (TEES), Texas A&M University, College Station, TX, USA
| |
Collapse
|
18
|
Effect of Cellulose and Cellulose Nanocrystal Contents on the Biodegradation, under Composting Conditions, of Hierarchical PLA Biocomposites. Polymers (Basel) 2021; 13:polym13111855. [PMID: 34199684 PMCID: PMC8199790 DOI: 10.3390/polym13111855] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2021] [Revised: 05/26/2021] [Accepted: 05/26/2021] [Indexed: 11/17/2022] Open
Abstract
In this work, the effect of microfibrillated cellulose (MFC) and cellulose nanocrystals (CNCs) on the biodegradation, under composting conditions, of hierarchical PLA biocomposites (HBCs) was studied using a full 22 factorial experimental design. The HBCs were prepared by extrusion processing and were composted for 180 days. At certain time intervals, the specimens were removed from the compost for their chemical, thermal and morphological characterizations. An ANOVA analysis was carried out at different composting times to study MFC and CNCs’ effects on biodegradation. The specimen’s mass loss and molecular weight loss were selected as independent variables. The results show that the presence of MFC enhances the PLA biodegradation, while with CNCs it decreases. However, when both cellulosic fibers are present, a synergistic effect was evident—i.e., in the presence of the MFC, the inclusion of the CNCs accelerates the HBCs biodegradation. Analysis of the ANOVA results confirms the relevance of the synergistic role between both cellulosic fibers over the HBC biodegradation under composting conditions. The results also suggest that during the first 90 days of incubation, the hydrolytic PLA degradation prevails, whereas, beyond that, the enzymatic microbial biodegradation dominates. The SEM results show MFC’s presence enhances the surface biodeterioration to a greater extent than the CNCs and that their simultaneous presence enhances PLA biodegradation. The SEM results also indicate that the biodegradation process begins from hydrophilic cellulosic fibers and promotes PLA biodegradation.
Collapse
|
19
|
Dąbrowska GB, Janczak K, Richert A. Combined use of Bacillus strains and Miscanthus for accelerating biodegradation of poly(lactic acid) and poly(ethylene terephthalate). PeerJ 2021; 9:e10957. [PMID: 33850642 PMCID: PMC8018249 DOI: 10.7717/peerj.10957] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2020] [Accepted: 01/27/2021] [Indexed: 01/03/2023] Open
Abstract
Background The aim of this study was to verify whether the presence of Bacillus strains and of miscanthus influence biodegradation and formed of biofilm of poly(lactic acid) (PLA) and poly(ethylene terephthalate) (PET). Methods The experiment conducted in compost soil showed that strains Bacillus subtilis and Bacillus cereus isolated from heavy metal contaminated environment have biochemical activity and accelerate biodegradation of both plastic materials. Results For PLA film it was found that the carbonyl index dropped by over 15% in the presence of B. subtilis, while the film tensile strength decreased by 35% and the oxygen to carbon O/C ratio was higher by 3% in the presence of B. cereus, and the presence of miscanthus resulted in a loss of weight. For PET film, a decrease in the carbonyl index by 16% was observed following inoculation with B. cereus. The metabolic activity of this strain contributed to the reduction of the film’s tensile strength by 17% and to the increase in the permeability to O2 and CO2. The most intense degradation of PET film was observed in the presence of bacteria and plants. B. subtilis strain combined with miscanthus plantings may be a promising method for accelerating PLA and PET degradation in compost soil.
Collapse
Affiliation(s)
- Grażyna B Dąbrowska
- Department of Genetics, Faculty of Biological and Veterinary Science, Nicolaus Copernicus University, Toruń, Kuyavian-Pomeranian, Poland
| | - Katarzyna Janczak
- Research Network Łukasiewicz, Institute for Engineering of Polymer Materials and Dyes, Research Network Łukasiewicz, Toruń, Kuyavian-Pomeranian, Poland
| | - Agnieszka Richert
- Department of Genetics, Faculty of Biological and Veterinary Science, Nicolaus Copernicus University, Toruń, Kuyavian-Pomeranian, Poland
| |
Collapse
|
20
|
Ncube LK, Ude AU, Ogunmuyiwa EN, Zulkifli R, Beas IN. Environmental Impact of Food Packaging Materials: A Review of Contemporary Development from Conventional Plastics to Polylactic Acid Based Materials. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E4994. [PMID: 33171895 PMCID: PMC7664184 DOI: 10.3390/ma13214994] [Citation(s) in RCA: 129] [Impact Index Per Article: 32.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/24/2020] [Revised: 09/25/2020] [Accepted: 09/28/2020] [Indexed: 12/13/2022]
Abstract
Plastics have remained the material of choice, and after serving their intended purpose, a large proportion ends up in the environment where they persist for centuries. The packaging industry is the largest and growing consumer of synthetic plastics derived from fossil fuels. Food packaging plastics account for the bulk of plastic waste that are polluting the environment. Additionally, given the fact that petroleum reserves are finite and facing depletion, there is a need for the development of alternative materials that can serve the same purpose as conventional plastics. This paper reviews the function of packaging materials and highlights the future potential of the adoption of green materials. Biopolymers have emerged as promising green materials although they still have very low market uptake. Polylactic acid (PLA) has emerged as the most favoured bioplastic. However, it is limited by its high cost and some performance drawbacks. Blending with agricultural waste and natural fillers can result in green composites at low cost, low greenhouse gas emissions, and with improved performance for food packaging applications. The continent of Africa is proposed as a rich source of fibres and fillers that can be sustainably exploited to fabricate green composites in a bid to achieve a circular economy.
Collapse
Affiliation(s)
- Lindani Koketso Ncube
- Department of Mechanical, Energy and Industrial Engineering, Faculty of Engineering and Technology (FET), Botswana International University of Science and Technology (BIUST), Private Mail Bag 16, Palapye, Botswana;
| | - Albert Uchenna Ude
- Department of Mechanical, Energy and Industrial Engineering, Faculty of Engineering and Technology (FET), Botswana International University of Science and Technology (BIUST), Private Mail Bag 16, Palapye, Botswana;
| | - Enoch Nifise Ogunmuyiwa
- Department of Chemical, Materials &Metallurgical Engineering Academic, FET, BIUST, Private Mail Bag 16, Palapye, Botswana;
| | - Rozli Zulkifli
- Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, The National University of Malaysia, UKM, Bangi 43600, Malaysia;
| | - Isaac Nongwe Beas
- Botswana Institute for Technology Research and Innovation (BITRI), Private Bag 0082, Gaborone, Botswana;
| |
Collapse
|
21
|
Camacho-Muñoz R, Villada-Castillo HS, Solanilla-Duque JF. Anaerobic biodegradation under slurry thermophilic conditions of poly(lactic acid)/starch blend compatibilized by maleic anhydride. Int J Biol Macromol 2020; 163:1859-1865. [DOI: 10.1016/j.ijbiomac.2020.09.183] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2020] [Revised: 09/15/2020] [Accepted: 09/21/2020] [Indexed: 10/23/2022]
|
22
|
Sun Y, Lee D, Wang Y, Li S, Ying J, Liu X, Xu G, Gwon J, Wu Q. Thermal decomposition behavior of
3D
printing filaments made of wood‐filled polylactic acid/starch blend. J Appl Polym Sci 2020. [DOI: 10.1002/app.49944] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Yufeng Sun
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
- School of Renewable Natural Resources Louisiana State University AgCenter Baton Rouge Louisiana USA
| | - Danbee Lee
- School of Renewable Natural Resources Louisiana State University AgCenter Baton Rouge Louisiana USA
| | - Yapeng Wang
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
| | - Suiliang Li
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
| | - Jilai Ying
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
| | - Xinping Liu
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
| | - Guangyin Xu
- Collaborative Innovation Center of Biomass Energy, College of Mechanical and Electrical Engineering Henan Agricultural University Zhengzhou China
| | - Jaegyoung Gwon
- Forest products department National institute of Forest Science Seoul South Korea
| | - Qinglin Wu
- School of Renewable Natural Resources Louisiana State University AgCenter Baton Rouge Louisiana USA
| |
Collapse
|
23
|
Flynn A, Torres LF, Hart‐Cooper W, McCaffrey Z, Glenn GM, Wood DF, Orts WJ. Evaluation of biodegradation of polylactic acid mineral composites in composting conditions. J Appl Polym Sci 2020. [DOI: 10.1002/app.48939] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Allison Flynn
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| | - Lennard F. Torres
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| | - William Hart‐Cooper
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| | - Zach McCaffrey
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| | - Gregory M. Glenn
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| | - Delilah F. Wood
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| | - William J. Orts
- ARS US Department of AgricultureBioproducts Research Unit, WRRC Albany California 94710
| |
Collapse
|
24
|
Li X, Gong S, Yang L, Zhang F, Xie L, Luo Z, Xia X, Wang J. Study on the degradation behavior and mechanism of Poly(lactic acid) modification by ferric chloride. POLYMER 2020. [DOI: 10.1016/j.polymer.2019.121991] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
25
|
Sable S, Mandal DK, Ahuja S, Bhunia H. Biodegradation kinetic modeling of oxo-biodegradable polypropylene/polylactide/nanoclay blends and composites under controlled composting conditions. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2019; 249:109186. [PMID: 31415925 DOI: 10.1016/j.jenvman.2019.06.087] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/20/2019] [Revised: 05/18/2019] [Accepted: 06/17/2019] [Indexed: 06/10/2023]
Abstract
Polypropylene/polylactide/nanoclay blend/composite films with/without pro-oxidants/compatibilizer were prepared and aerobically degraded to measure the CO2 evolution under controlled composting conditions as per ASTM D 5338. A first-order Komilis model in series with a flat lag phase was postulated involving two stages; hydrolysis of solid carbon followed by its rapid mineralization. The first, rate-limiting stage further comprised of three possible parallel paths: the solid hydrolysis of readily, moderately, and slowly hydrolyzable carbon fractions. The model parameters were computed after correlating with the experimental data using nonlinear regression analysis. The results of the model characteristic parameters, un-degraded/hydrolyzable/mineralisable-intermediate carbon kinetics, and degradation curves exhibit two distinct kinetic regimes. The first regime comprising of slowly and moderately hydrolyzable carbon is shown by the first four films without pro-oxidants. This causes low degradability and degradation rate. The second regime comprising of the readily and moderately hydrolyzable carbon is shown by another four films containing pro-oxidants. They exhibit relatively high degradability and degradation rate, which peaks at around 11-14th day in the range of 0.219-0.268% per day. The values of their moderately hydrolyzable carbon fractions and the corresponding hydrolysis rates are significantly higher than that of the first regime. For the first regime, the degradability and degradation rate decreases with increase in the slowly hydrolyzable carbon impervious to microbial attack. Their degradation rate profiles show an absence of growth phase due to the absence of readily hydrolyzable carbon. The rate decreases monotonously starting from the maximum value ranging from 0.043 to 0.180% per day. The approach presented can also be implemented to model and design equipment for other waste biodegradation systems.
Collapse
Affiliation(s)
- Sunil Sable
- Department of Chemical Engineering, Thapar Institute of Engineering & Technology, (Deemed to be University), Bhadson Road, Patiala, 147004, Punjab, India.
| | - Dev K Mandal
- Department of Chemical Engineering, Sant Longowal Institute of Engineering and Technology, Deemed to Be University Under MHRD, Govt of India, Longowal, 148106, Punjab, India.
| | - Sanjeev Ahuja
- Department of Chemical Engineering, Thapar Institute of Engineering & Technology, (Deemed to be University), Bhadson Road, Patiala, 147004, Punjab, India.
| | - Haripada Bhunia
- Department of Chemical Engineering, Thapar Institute of Engineering & Technology, (Deemed to be University), Bhadson Road, Patiala, 147004, Punjab, India.
| |
Collapse
|
26
|
Yue H, Fernández‐Blázquez JP, Vilatela JJ, Pérez E. Morphology, thermal, and crystallization analysis of polylactic acid in the presence of carbon nanotube fibers with tunable fiber loadings through polymer infiltration. POLYMER CRYSTALLIZATION 2019. [DOI: 10.1002/pcr2.10081] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Affiliation(s)
- Hangbo Yue
- School of Chemical Engineering and Light IndustryGuangdong University of Technology Guangzhou China
- IMDEA Materials Institute Getafe Madrid Spain
| | | | | | - Ernesto Pérez
- Instituto de Ciencia y Tecnología de Polímeros (ICTP‐CSIC) Madrid Spain
| |
Collapse
|
27
|
Solati M, Saeidi A, Ghasemi I. The effect of graphene nanoplatelets on dynamic properties, crystallization, and morphology of a biodegradable blend of poly(lactic acid)/thermoplastic starch. IRANIAN POLYMER JOURNAL 2019. [DOI: 10.1007/s13726-019-00731-5] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
28
|
Zandi A, Zanganeh A, Hemmati F, Mohammadi-Roshandeh J. Thermal and biodegradation properties of poly(lactic acid)/rice straw composites: effects of modified pulping products. IRANIAN POLYMER JOURNAL 2019. [DOI: 10.1007/s13726-019-00709-3] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
|
29
|
Nazareth M, Marques MRC, Leite MCA, Castro ÍB. Commercial plastics claiming biodegradable status: Is this also accurate for marine environments? JOURNAL OF HAZARDOUS MATERIALS 2019; 366:714-722. [PMID: 30583241 DOI: 10.1016/j.jhazmat.2018.12.052] [Citation(s) in RCA: 62] [Impact Index Per Article: 12.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/08/2018] [Revised: 12/13/2018] [Accepted: 12/15/2018] [Indexed: 06/09/2023]
Abstract
Concerns about plastic pollution and global public policies have encouraged consumers to acquire environmentally friendly products. Thus, products made of biodegradable plastics have been preferred by the public, despite their costs. However, greenwashing practices, promising more environmental benefits than the products actually offer, has become frequent. Nevertheless, no studies assessing the occurrence of greenwashing in commercial plastic products sold in large world economies have been performed. The present study aimed to experimentally evaluate alterations in structure and chemical composition of selected plastic products marketed in Canada, USA and Brazil. The aging experiments carried out by seawater immersion for 180 days showed no evidence of degradation in 4 out of the 6 studied samples, despite product claims of biodegradability or 100% degradability status. This finding denotes unequivocal greenwashing practices, even including bags made of polyethylene, an ordinary non-biodegradable polymer. Thus, the inadequate adoption of green marketing is deceiving to consumers and may lead to improper disposal of these materials. These practices are highly counterproductive in view of the global public policies recently adopted to control plastic pollution. Therefore, considering the technologies currently available for identification of polymers, a strict control should be exercised over products that claim biodegradable status.
Collapse
Affiliation(s)
- Monick Nazareth
- Programa de Pós-Graduação em Química do Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ), Rua São Francisco Xavier, 524 Pavilhão Haroldo Lisboa da Cunha, 20559-900, RJ, Brazil
| | - Mônica R C Marques
- Programa de Pós-Graduação em Química do Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ), Rua São Francisco Xavier, 524 Pavilhão Haroldo Lisboa da Cunha, 20559-900, RJ, Brazil
| | - Marcia C A Leite
- Programa de Pós-Graduação em Química do Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ), Rua São Francisco Xavier, 524 Pavilhão Haroldo Lisboa da Cunha, 20559-900, RJ, Brazil
| | - Ítalo Braga Castro
- Instituto do Mar, Universidade Federal de São Paulo (IMAR-UNIFESP), Rua Maria Máximo, 11030-100, Santos, SP, Brazil.
| |
Collapse
|
30
|
Lv S, Zhang Y, Tan H. Thermal and thermo-oxidative degradation kinetics and characteristics of poly (lactic acid) and its composites. WASTE MANAGEMENT (NEW YORK, N.Y.) 2019; 87:335-344. [PMID: 31109534 DOI: 10.1016/j.wasman.2019.02.027] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2018] [Revised: 01/03/2019] [Accepted: 02/10/2019] [Indexed: 05/14/2023]
Abstract
Thermal degradation behavior and kinetics of starch/PLA composites in an inert and oxygen atmosphere were investigated by TG and TG-FTIR techniques. It is shown that the thermal degradation process can be divided into three stages, and a significant difference between thermal and thermo-oxidative degradation is the third stage in which the residual chars are further cracked for the thermo-oxidative degradation. The activation energy was calculated using the iso-conversional Flynn-Wall-Ozawa (FWO) method. The lower activation energy for thermo-oxidative degradation indicated that oxygen had an accelerated effect on thermal degradation. The variation of activation energy indicated that the decomposition of all the samples was a complex process that included at least two different mechanisms. Evolution of the evolved gaseous products with temperature was studied to understand the thermal and thermo-oxidative decomposition comprehensively. According to the TG-FTIR analysis, the gaseous products mainly contained lactide, cyclic oligomers, aldehydes, CO2, CO, and H2O.
Collapse
Affiliation(s)
- Shanshan Lv
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin 150040, PR China
| | - Yanhua Zhang
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin 150040, PR China.
| | - Haiyan Tan
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin 150040, PR China
| |
Collapse
|
31
|
Abstract
Hydrophobic cellulose/SiO2 composites were prepared. Resultant hydrophobic cellulose/SiO2 composites were melt mixed with PLA using a twin-screw extruder to obtain 10 wt% masterbatch. Again, 10 wt% masterbatch was melt mixed with virgin PLA, resulting in PLA containing hydrophobic cellulose/SiO2 at various contents (1 wt%, 3 wt%, and 5 wt%) using a twin-screw extruder (barrel zone temperature: 150/160/170/180/190°C (die zone)). Injection-molded samples were prepared for mechanical properties evaluation. Results showed that poor mechanical properties found at low percent loadings were associated with a significant depolymerization of masterbatch composition due to twice thermal treatments. Note that 10 wt% masterbatch was subjected to injection molding straight away in a one-step process. Results showed that 10 wt% hydrophobic cellulose/SiO2/PLA composites exhibited mechanical properties equivalent to neat PLA. Importantly, the addition of hydrophobic cellulose/SiO2 at high percent loading could favor landfill degradation of PLA via water absorption ability of cellulose. It was expected that enzymatic hydrolysis of cellulose resulted in the formation of lactic acid and silicic acid which consequently catalyzed the hydrolytic degradation (acid hydrolysis) of PLA. The hydrolytic degradation produced carboxylic acid end group which further accelerated the degradation rate.
Collapse
|
32
|
Lima EMB, Lima AM, Minguita APS, Rojas dos Santos NR, Pereira ICS, Neves TTM, da Costa Gonçalves LF, Moreira APD, Middea A, Neumann R, Tavares MIB, Oliveira RN. Poly(lactic acid) biocomposites with mango waste and organo-montmorillonite for packaging. J Appl Polym Sci 2019. [DOI: 10.1002/app.47512] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Affiliation(s)
| | - Aline Muniz Lima
- Brazilian Agricultural Research Corporation; EMBRAPA Food Technology; Brazil
| | | | | | | | | | | | - Ana Paula Duarte Moreira
- Materials and Metallurgy Engineering Program/COPPE; Federal University of Rio de Janeiro; Brazil
| | | | | | | | - Renata Nunes Oliveira
- Postgraduate Program of Chemical Engineering/DEQ; Federal Rural University of Rio de Janeiro; Brazil
| |
Collapse
|
33
|
Lv S, Zhang Y, Gu J, Tan H. Physicochemical evolutions of starch/poly (lactic acid) composite biodegraded in real soil. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2018; 228:223-231. [PMID: 30227334 DOI: 10.1016/j.jenvman.2018.09.033] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/13/2018] [Revised: 09/05/2018] [Accepted: 09/09/2018] [Indexed: 06/08/2023]
Abstract
Plastic pollution is a major environmental problem and the waste disposal is a challenge in this case. Poly (lactic acid) (PLA) based biodegradable materials is one of the most attractive polymers which can fulfill the current demand. In this work, the degradation of starch/PLA composite was investigated in real soil environment. The weight loss results demonstrated that the degradation rate of PLA could be accelerated by starch. Scanning electrical microscopy (SEM) and Fourier transform infrared (FTIR) results showed that the samples degraded faster with the presence of starch. The mechanical strengths had an abrupt decrease for the starch/PLA composite while that of PLA only decreased in a low degree. The distribution of carboxyl group intensity and carbon atomic percent reflected the heterogeneity of biodegradation for starch/PLA composite in soil. Moreover, the variation of internal carbon atomic percent was higher than that on the surface, demonstrating that the degradation of starch/PLA composite was bulk degradation. Based on the role of starch played in starch/PLA composite and the physicochemical performance evolutions during biodegradation, it should create a scientific basis for people interested in studying the biodegradation of PLA, and provide some knowledge about controlling the biodegradation rate of PLA through adjusting the content of starch in the composite.
Collapse
Affiliation(s)
- Shanshan Lv
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin, 150040, PR China
| | - Yanhua Zhang
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin, 150040, PR China.
| | - Jiyou Gu
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin, 150040, PR China
| | - Haiyan Tan
- Key Laboratory of Bio-based Material Science and Technology (Ministry of Education), College of Material Science and Engineering, Northeast Forestry University, Harbin, 150040, PR China
| |
Collapse
|
34
|
Hamad K, Kaseem M, Ayyoob M, Joo J, Deri F. Polylactic acid blends: The future of green, light and tough. Prog Polym Sci 2018. [DOI: 10.1016/j.progpolymsci.2018.07.001] [Citation(s) in RCA: 183] [Impact Index Per Article: 30.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
35
|
Norazlina H, Hadi AA, Qurni AU, Amri M, Mashelmie S, Kamal Y. Effects of multi-walled carbon nanotubes (MWCNTs) on the degradation behavior of plasticized PLA nanocomposites. Polym Bull (Berl) 2018. [DOI: 10.1007/s00289-018-2454-3] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
36
|
Zare Y, Rhim S, Garmabi H, Rhee KY. A simple model for constant storage modulus of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites at low frequencies assuming the properties of interphase regions and networks. J Mech Behav Biomed Mater 2018; 80:164-170. [PMID: 29427932 DOI: 10.1016/j.jmbbm.2018.01.037] [Citation(s) in RCA: 64] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2017] [Revised: 01/27/2018] [Accepted: 01/30/2018] [Indexed: 01/19/2023]
Abstract
The networks of nanoparticles in nanocomposites cause solid-like behavior demonstrating a constant storage modulus at low frequencies. This study examines the storage modulus of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes (CNT) nanocomposites. The experimental data of the storage modulus in the plateau regions are obtained by a frequency sweep test. In addition, a simple model is developed to predict the constant storage modulus assuming the properties of the interphase regions and the CNT networks. The model calculations are compared with the experimental results, and the parametric analyses are applied to validate the predictability of the developed model. The calculations properly agree with the experimental data at all polymer and CNT concentrations. Moreover, all parameters acceptably modulate the constant storage modulus. The percentage of the networked CNT, the modulus of networks, and the thickness and modulus of the interphase regions directly govern the storage modulus of nanocomposites. The outputs reveal the important roles of the interphase properties in the storage modulus.
Collapse
Affiliation(s)
- Yasser Zare
- Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran
| | - Sungsoo Rhim
- Department of Mechanical Engineering, College of Engineering, Kyung Hee University, Yongin 446-701, Republic of Korea
| | - Hamid Garmabi
- Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran
| | - Kyong Yop Rhee
- Department of Mechanical Engineering, College of Engineering, Kyung Hee University, Yongin 446-701, Republic of Korea.
| |
Collapse
|