Protein extraction into the bicontinuous microemulsion phase of a Water/SDS/pentanol/dodecane winsor-III system: Effect on nanostructure and protein conformation

Effect of equilibration time on the structural gradient in the vertical direction for bicontinuous microemulsions in Winsor-III and -IV systems

Bicontinuous microemulsions (BMEs), self-assembly systems consisting of oil and water nanodomains separated by surfactant monolayers, have many applications. However, changes in structure and properties of BMEs in the vertical direction can affect BMEs' utility. This study's objective was to determine the effect of equilibration time (τeq) on structural changes in the vertical direction for bicontinuous phases of Winsor-III (WIII) systems in situ or after being isolated, for D2O + H2O/1-dodecane/sodium dodecyl sulfate (SDS)/1-pentanol/NaCl at 22 °C. Small-angle neutron scattering (SANS) measurements were performed using a vertical stage sample environment that precisely aligned samples in the neutron beam. SANS data were fitted by the Teubner-Strey (TS) model and changes in TS-derived parameter values were observed. For 10 min ≤ τeq ≤ 4 h, the effective activity of the bicontinuous phase's surfactant monolayers increased with time at all vertical positions. At short equilibration (τeq = 10 min), small but significant amounts of water and oil were transiently emulsified near the WIII upper liquid-liquid interface. WIII systems underwent a relaxation process after being transferred to narrow 1 mm pathlength cells, resulting in a decrease of surfactant activity for the top half of the bicontinuous phase. For isolated bicontinuous phases, results suggest that SDS was desorbed from the BMEs by quartz near the bottom, while near the top, the water concentration near was relatively high. The results suggest that WIII systems should equilibrate for at least 4 hours after being prepared and transferred to a container that differs in cross sectional area and surfactant behavior in BMEs can change near interfaces.

Assessment of antimicrobial activity of melittin encapsulated in bicontinuous microemulsions prepared using renewable oils

The objective of this study is to demonstrate that melittin, a well-studied antimicrobial peptide (AMP), can be solubilized in an active form in bicontinuous microemulsions (BMEs) that employ biocompatible oils. The systems investigated consisted of Winsor-III and -IV BME phases composed of Water/Aerosol-OT (AOT)/Polysorbate 85/isopropyl myristate and a Winsor-IV BME employing Polysorbate 80 and limonene. We found that melittin resided in an α-helix-rich configuration and was in an apolar environment for the AOT/Polysorbate 85 Winsor-III system, suggesting that melittin interacted with the surfactant monolayer and was in an active conformation. An apolar environment was also detected for melittin in the two Winsor-IV systems, but to a lesser extent than the Winsor-III system. Small-angle X-ray scattering analysis indicated that melittin at a concentration of 1.0 g/Laq in the aqueous subphase of the Winsor-IV systems led to the greatest impact on the BME structure (e.g., decrease of quasi-periodic repeat distance and correlation length and induction of interfacial fluidity). The antimicrobial activity of the Polysorbate 80 Winsor-IV system was evaluated against several bacteria prominent in chronic wounds and surgical site infections (SSIs). Melittin-free BMEs inhibited the growth of all tested bacteria due to its oil, limonene, while the inclusion of 1.0 g/Laq of melittin in the BMEs enhanced the activity against several bacteria. A further increase of melittin concentration in the BMEs had no further enhancement. These results demonstrate the potential utility of BMEs as a delivery platform for AMPs and other hydrophilic and lipophilic drugs to inhibit antibiotic-resistant microorganisms in chronic wounds and SSIs.

Microemulsion: a novel alternative technique for edible oil extraction_a mechanistic viewpoint

Microemulsions, as isotropic, transparent, nano size (<100 nm), and thermodynamically stable dispersions, are potentially capable of being used in food formulations, functional foods, pharmaceuticals, and in many other fields for various purposes, particularly for nano-encapsulation, extraction of bioactive compounds and oils, and as nano-reactors. However, their functionalities, and more importantly their oil extraction capability, strongly depend on, and are determined by, their formulation, molecular structures and the type, ratio and functionality of surfactants and co-surfactants. This review extensively describes microemulsions (definition, fabrication, thermodynamic aspects, and applications), and their various mechanisms of oil extraction (roll-up, snap-off, and solubilization including those by Winsor Types I, II, III, and IV systems). Applications of various food grade (natural or synthetic) and extended surfactants for edible oil extraction are then covered based on these concepts.

Quantification of microemulsion systems using low-field T1-weighted imaging

Applied to Enhanced Oil Recovery, microemulsions are valuable systems for extracting the crude oil trapped by capillary forces in the porous reservoir rocks. The performances of the injected formulations are often assessed by quantifying oil composition in model systems that contain relatively high amount of surfactant/co-surfactant. Recently, the question of representativity of such systems was raised because kinetics aspects and complexity of crude were neglected in model systems and are likely to impact the process efficiency. The current quantification techniques limit the characterization of representative model systems as they are destructive, time consuming and not often applicable to dark or opaque systems. In the original aim to provide a quantitative kinetic study of such microemulsions, we propose a high resolution T₁-weighted imaging technique to have access to 1D-composition profiles of co-surfactant, oil and brine in Winsor I, Winsor III and Winsor II microemulsions. The analysis is carried out on model systems at equilibrium for proof of concept. Results are correlated with X-Ray Micro-CT experiments to provide better interpretations and assess the method accuracy. We provide conditions of validity of the developed NMR method and discuss its potential limitations. To a larger extent, the method could be of interest to other applications that use similar systems.

Investigating the effect of a simplified perfume accord and dilution on the formation of mixed-surfactant microemulsions

The phase analysis of a mixed surfactant system is much more complex than that for a single surfactant system. The addition of fragrance further enhances the complexity of such colloidal systems. The wide variation in structure and log P values of perfume raw materials influence its partitioning into the micellar phase. Herein, we have created a simplified perfume accord consisting of three perfume raw materials (3-PRM) and investigated its loading within a mixed-surfactant system consisting of sodium trideceth-2 sulfate/ST2S and cocamidopropyl betaine/CAPB, along with citric acid and dipropylene glycol. We performed a systematic phase diagram analysis and identified the isotropic phases and compositions of interest. Select compositions from the phase diagram were further investigated to learn how the geometry of the surfactant self-assembly and the localization of the PRMs within the surfactant self-assembly changed when water or perfume is added. A combined small-angle neutron scattering/SANS and NMR methodology was used to identify variation in colloidal domains and positioning of perfume molecules at varying dilutions/rinse off scenarios. The results obtained were utilized to better distinguish distorted micelles from true microemulsions. The systematic investigation here provides a fundamental understanding about the self-assembly, encapsulation and perfume release from a commercially relevant mixed surfactant system.

Structural changes and phase analyses of a three-PRM accord in sodiumtrideceth-2 sulfate and cocamidopropyl betaine, citric acid and diproplylene glycol surfactant system as a function of dilution.

Melittin exerts opposing effects on short- and long-range dynamics in bicontinuous microemulsions

Bicontinuous microemulsions (BμEs) are a promising biomembrane mimetic system for investigating the behavior of antimicrobial peptides (AMPs) and their delivery to open wounds to combat antibiotic-resistant microorganisms. The properties of the BμE host are in turn affected by the guest AMP and can deviate from those of the unperturbed BμEs, especially at higher AMP concentrations. Here we report the effect of an archetypal AMP, melittin, over a wide range of concentrations, on the nanoscopic dynamics of BμEs formed by water/sodium dodecyl sulfate (SDS)/1-pentanol/dodecane, investigated using quasi-elastic neutron scattering (QENS). Two distinct motions are observed, namely, (i) the lateral motion of the surfactant on the surface of the oil channels and (ii) the internal motion of the surfactants. It is found that melittin restricts both the lateral and the internal motion, thereby acting as a stiffening agent. The lateral motion is more strongly affected, at low concentration of melittin. The lateral diffusion coefficient decreased sharply, approaching a constant value at higher melittin concentration. These results are in sharp contrast with the recent dynamic light scattering and neutron spin echo results which showed that at the length and time scales longer than those probed in the current work, melittin enhanced the long-range collective and local undulation motions of BμEs. Considered together, our results indicate that incorporation of melittin modulates the dynamics differently depending on the spatial and temporal regimes, in which the dynamics are being probed. The addition of melittin at low concentrations increased the magnitude of the zeta potential, but further increase of the melittin concentration decreased it. This suggests that addition of melittin at low concentrations led to increase in the surfactant concentration, but did not affect the negative charge per surfactant molecule, while further addition of melittin led to ion pairing of melittin with the oppositely charged surfactant. This study therefore demonstrates how the addition of melittin hinders the lateral motion of surfactants as a result of the strong association between melittin and SDS, suggesting that the release of AMPs from BμE-based delivery vehicles may be hindered.

Electron Transfer in Microemulsion-Based Electrolytes

The use of flowing electrochemical reactors, for example, in redox flow batteries and in various electrosynthesis processes, is increasing. This technology has the potential to be of central significance in the increased deployment of renewable electricity for carbon-neutral processes. A key element of optimizing efficiency of electrochemical reactors is the combination of high solution conductivity and reagent solubility. Here, we show a substantial rate of charge transfer for an electrochemical reaction occurring in a microemulsion containing electroactive material is loaded inside the nonpolar (toluene) subphase of the microemulsion. The measured rate constant translates to an exchange current density comparable to that in redox flow batteries. The rate could be controlled by the surfactant, which maintains partitioning of reactants and products by forming an interfacial region with ions in the aqueous phase in close proximity. The hypothesized mechanism is evocative of membrane-bound enzymatic reactions. Achieving sufficient rates of electrochemical reaction is the product of an effort designed to establish a reaction condition that meets the requirements of electrochemical reactors using microemulsions to realize a separation of conducting and reactive elements of the solution, opening a door to the broad use of microemulsions to effect controlled electrochemical reactions as steps in more complex processes.

Microemulsions as nano-reactors for the solubilization, separation, purification and encapsulation of bioactive compounds

Bioactive components possess various functionalities and are most interested for different food, nutraceutical and pharmaceutical formulations. The current review will discuss the preparation methods and fabrication techniques to design microemulsions (MEs) for the solubilization, separation, encapsulation and purification of various agro-food bioactive compounds. ME systems have shown suitable potential in enhancing oil recovery, protein extraction, and isolation of bioactive compounds. Moreover, the capability of ME based systems as drug and nutraceutical delivery cargos, and synthesis of various organic and inorganic nanoparticles, especially using biopolymers, will be investigated. ME liquid membranes are also developed as nano-extractor/nano-reactor vehicles, capable of simultaneous extraction, encapsulation or even synthesis of hydrophilic and lipophilic bioactive compounds for food, nutraceutical and drug applications.

Recovery of astaxanthin from shrimp (Penaeus vannamei) waste by ultrasonic-assisted extraction using ionic liquid-in-water microemulsions

In this study, an ultrasonic-assisted extraction using microemulsions was developed for the recovery of natural astaxanthin from shrimp waste. To select applicable solvent systems, the phase equilibrium, microstructure, and physical properties of the microemulsions were investigated. Then the effect of ultrasonic power, ultrasonic time, and microemulsion composition on the extraction efficiency (EEAst) and extraction yield (EAst) of astaxanthin were determined. Compared with organic solvents (ethanol, acetone, and dimethyl sulfoxide), the microemulsion contained tributyloctylphosphonium bromide ([P4448]Br), tributyloctylphosphonium trifluoroacetate ([P4448]CF3COO), or tetrabutylphosphonium trifluoroacetate ([P4444]CF3COO) resulted in significantly enhanced extraction of astaxanthin due to the stronger electrostatic interactions and hydrogen-bonding interactions. When ultrasonic-assisted extraction conditions were 50 W and 60 min, the highest EEAst and EAst reached 32.47 µg·g-1 and 99% by using the IL-in-water microemulsion of [P4448]Br/(TX-100 + n-butanol)/water (0.13:0.25:0.62, w/w), respectively. The IL-based microemulsion is an adequate alternative to conventional methods in the extraction and recovery of astaxanthin from natural bioresources.

Microemulsion as nanoreactor for lutein extraction: Optimization for ultrasound pretreatment

In the present study, the capability of microemulsion technique, as a novel technique for synchronous extraction and solubilization of lipophilic compounds, on lutein extraction from marigold petals was investigated. Under the optimized sonication (amplitude 100%, 120 s, 25°C), the extraction efficiency increased (85%) using SDS:ethanol (1:2)-based ME. Moreover, sonication led to smaller droplets (12-163 nm) with favorable thermodynamic stability. In addition, the developed MEs showed higher thermal and especially UV stability in comparison to organic solvent extracts which were fainted with first-order kinetics. It was also found that co-surfactant could be eliminated from formulation on the expense of the optimized sonication, was valuable output form industrial point of view. These findings revealed the high potential of ultrasound technique on the extraction and solubilization of lutein by ME technique which can be directly utilized in lutein-enriched functional foods and beverages. PRACTICAL APPLICATIONS: From applicability point of view, the solvent extracted compounds cannot be easily dissolved in food or pharmaceutical systems that are mostly hydrophilic. Therefore, microemulsions (MEs), as green and environmentally friendly food-grade systems, due to their potential capability for simultaneous extraction and solubilization of carotenoids are of great interest. Therefore, the present study confirmed the practical ability of MEs in lutein extraction and protection. All in all, the developed lutein MEs with high lutein extraction capacity and superior lutein chemical stability against thermal treatment and especially UV radiation is an original finding which allows design of new functional foods and could be potentially useful for enriching foods, pharmaceuticals, nutraceuticals, and supplement formulation.

Hierarchical bioresponsive nanocarriers for codelivery of curcumin and doxorubicin

Hierarchical responsive nanocarriers have received much attention for targeted delivery of chemotherapeutics. In this study, we designed pH and redox dual-stage responsive nanocarriers in the different delivery stages for co-delivery phosphorylated curcumin (p-Cur) with doxorubicin (Dox). The MSNs nanocarriers were functionalized via specific cleavable PEGylation and hydrogel coating crosslinked by disulfide bonds: MSNs as core load Dox; p-Cur encapsulated in hydrogel coating. In blood circulation, PEGylation endow the nanocarriers with long time during blood circulation; while in tumor tissue, PEG shells could be cleaved due to the pH-sensitive bond and expose the cationic hydrogel coating to improve cell uptake; while inside tumor cells, hydrogel coating could be cleaved due to the GSH and release the drugs. The results showed that the dual-responsive shells endowed the nanocarriers with tumor extracellular pH-triggered cell uptake and specific cancer cell target release. The synergistic effects of the p-Cur and Dox enhanced cellular apoptosis in Hela cells.

Observation of a structural gradient in Winsor-III microemulsion systems

We demonstrate here for the first time via small-angle neutron scattering (SANS) that the middle, bicontinuous microemulsion (BμE) phase of Winsor-III systems undergoes a gradual change of structure and composition in the vertical direction, contrary to the commonly held belief of uniform structure and composition. A vertical stage was deployed to enable precise alignment of a custom-designed rectangular cell containing the WIII system with respect to the neutron beam, allowing for several different vertical positions to be analyzed. For the water/AOT/CK-2,13 (two-tailed alkyl ethoxylate containing a 1,3-dioxolane linkage)/heptane Winsor-III system, the quasi-periodic repeat distance (d) and correlation length (ξ), obtained from the Teubner-Strey model applied to the SANS data, decreased and the surface area per volume of the surfactant monolayer (via Porod analysis) increased in the downward direction, trends that reflect an increase of surfactant concentration, consistent with the ultralow interfacial tension that often occurs for the lower liquid-liquid interface of many WIII systems. The water/sodium dodecyl sulfate (SDS)/1-pentanol/dodecane system shared the same trend with regard to d as observed for AOT/CK-2,13. In contrast, for SDS/pentanol, ξ increased and the amphiphilicity factor (fa) decreased in the downward direction, trends consistent with a decrease of cosurfactant (pentanol) concentration in the downward direction. Non-uniformity in the vertical direction has implications in the transport of solutes between WIII phases during the extractive purification of proteins or the removal of heavy metals and pollutants from wastewater, or the deposition of BμEs onto hydrophilic vs. hydrophobic surfaces as thin coatings.

Bicontinuous microemulsions as a biomembrane mimetic system for melittin

Antimicrobial peptides effectively kill antibiotic-resistant bacteria by forming pores in prokaryotes' biomembranes via penetration into the biomembranes' interior. Bicontinuous microemulsions, consisting of interdispersed oil and water nanodomains separated by flexible surfactant monolayers, are potentially valuable for hosting membrane-associated peptides and proteins due to their thermodynamic stability, optical transparency, low viscosity, and high interfacial area. Here, we show that bicontinuous microemulsions formed by negatively-charged surfactants are a robust biomembrane mimetic system for the antimicrobial peptide melittin. When encapsulated in bicontinuous microemulsions formed using three-phase (Winsor-III) systems, melittin's helicity increases greatly due to penetration into the surfactant monolayers, mimicking its behavior in biomembranes. But, the threshold melittin concentration required to achieve these trends is lower for the microemulsions. The extent of penetration was decreased when the interfacial fluidity of the microemulsions was increased. These results suggest the utility of bicontinuous microemulsions for isolation, purification, delivery, and host systems for antimicrobial peptides.