The “pre-assembled state” of magainin 2 lysine-linked dimer determines its enhanced antimicrobial activity

Self-Assembled Peptide Hydrogel for Accelerated Wound Healing: Impact of N-Terminal and C-Terminal Modifications

Wound dressings are required to provide a moist environment for wounds, protect against invading infections, expedite tissue regeneration, and improve wound healing efficiency. Developing biomaterials with all aforesaid properties is still a big challenge. However, peptide-based hydrogels have the potential to overcome these challenges as they are biocompatible, biodegradable as well as have the ability to mimic the extracellular matrix and provide an appropriate moist environment which is important for wound healing. With this in mind, we report the preparation and comparison of three hexapeptide-based hydrogels, LIVAGD, with the aim to understand the importance of the N-terminal protecting group as well as the C-terminal amino acid substitution on its various biological efficacies. Fmoc and acetyl groups were used for N-terminal peptide protection, while aspartic acid was substituted with lysine at the C-terminus. The resulting peptide-based hydrogels were compared. Fmoc peptide-based hydrogels exhibited efficient anti-inflammatory action along with improved biocompatibility while lysine provided enhanced antibacterial effect to the hydrogel. Additionally, in vivo efficacy was examined using a mouse model, and Fmoc hydrogels demonstrated an improved wound healing ability with ∼40 % faster healing rate in comparison to the reported acetylated peptide hydrogels.

Detecting the Mechanism of Action of Antimicrobial Peptides by Using Microscopic Detection Techniques

Increasing antibiotic resistance has shifted researchers’ focus to antimicrobial peptides (AMPs) as alternatives to antibiotics. AMPs are small, positively charged, amphipathic peptides with secondary helical structures. They have the ability to disrupt the bacterial membrane and create wedges due to electrostatic differences. Water molecules enter the pathogens through those wedges and disrupt their normal cellular functioning, eventually causing the death of the pathogens. Keeping in mind the importance of AMPs, this review compiles recent data and is divided into three parts. The first part explains the AMP structure and properties, the second part comprises the spectroscopy techniques currently used for evaluating the AMP-bacterial targeting mechanism as well as its structure and safety; and the third part describes the production of AMPs from an animal source (whey protein). Most of the peptides that were used in recent studies have been either the precursors of a natural peptide or synthetic peptides with some modifications, but data on the exploitation of dairy protein are scarce. Among the little-studied milk proteins and peptides, in the last three years, whey protein has been studied the least based on the reported data. Because whey protein is a leftover part of cheese making that often drains out as cheese waste, causing soil and environmental pollution, today, the need of the hour is to produce safe AMPs from whey protein. The use of whey protein that is based on hydrolyzing lactic acid bacteria with some structural modifications can increase AMPs’ potency, stability, and safety, and it can also help to avoid soil and environmental pollution as a result of whey drainage.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Mechanistic Understanding from Molecular Dynamics in Pharmaceutical Research 2: Lipid Membrane in Drug Design

We review the use of molecular dynamics (MD) simulation as a drug design tool in the context of the role that the lipid membrane can play in drug action, i.e., the interaction between candidate drug molecules and lipid membranes. In the standard "lock and key" paradigm, only the interaction between the drug and a specific active site of a specific protein is considered; the environment in which the drug acts is, from a biophysical perspective, far more complex than this. The possible mechanisms though which a drug can be designed to tinker with physiological processes are significantly broader than merely fitting to a single active site of a single protein. In this paper, we focus on the role of the lipid membrane, arguably the most important element outside the proteins themselves, as a case study. We discuss work that has been carried out, using MD simulation, concerning the transfection of drugs through membranes that act as biological barriers in the path of the drugs, the behavior of drug molecules within membranes, how their collective behavior can affect the structure and properties of the membrane and, finally, the role lipid membranes, to which the vast majority of drug target proteins are associated, can play in mediating the interaction between drug and target protein. This review paper is the second in a two-part series covering MD simulation as a tool in pharmaceutical research; both are designed as pedagogical review papers aimed at both pharmaceutical scientists interested in exploring how the tool of MD simulation can be applied to their research and computational scientists interested in exploring the possibility of a pharmaceutical context for their research.

The Central PXXP Motif Is Crucial for PMAP-23 Translocation across the Lipid Bilayer

PMAP-23, a cathelicidin-derived host defense peptide, does not cause severe membrane permeabilization, but exerts strong and broad-spectrum bactericidal activity. We have previously shown that it forms an amphipathic α-helical structure with a central hinge induced by the PXXP motif, which is implicated in the interaction of PMAP-23 with negatively charged bacterial membranes. Here, we studied the potential roles of the PXXP motif in PMAP-23 translocation across the lipid bilayer by replacing Pro residues with either α-helix former Ala (PMAP-PA) or α-helix breaker Gly (PMAP-PG). Although both PMAP-PA and PMAP-PG led to effective membrane depolarization and permeabilization, they showed less antimicrobial activity than wild-type PMAP-23. Interestingly, we observed that PMAP-23 crossed lipid bilayers much more efficiently than its Pro-substituted derivatives. The fact that the Gly-induced hinge was unable to replace the PXXP motif in PMAP-23 translocation suggests that the PXXP motif has unique structural properties other than the central hinge. Surface plasmon resonance sensorgrams showed that the running buffer almost entirely dissociated PMAP-23 from the membrane surface, while its Pro-substituted derivatives remained significantly bound to the membrane. In addition, kinetic analysis of the sensorgrams revealed that the central PXXP motif allows PMAP-23 to rapidly translocate at the interface between the hydrophilic and hydrophobic phases. Taken together, we propose that the structural and kinetic understanding of the PXXP motif in peptide translocation could greatly aid the development of novel antimicrobial peptides with intracellular targets by promoting peptide entry into bacterial cells.

The Evaluation of UPro as a New Nutrient on High-Quality Egg Production From the Perspective of Egg Properties, Intestinal Histomorphology, and Oviduct Function of Laying Hens

This study was to investigate the effects of UPro as a new nutritive fortifier on high-quality egg production from the perspective of egg properties, intestinal histomorphology, and oviduct function of laying hens. Four hundred thirty-two Hy-Line Brown laying hens aged 56 weeks were allocated to four groups. Layers were given a basal diet or supplemented with different levels of small peptides (0.2, 0.4, and 0.8%) to replace soybean meal. After 1-week adaptation period, the feeding trial was conducted for 12 weeks. The results showed that UPro addition significantly decreased (P < 0.05) the hardness, stickiness, and chewiness of albumen of layers on weeks 12. A linear elevation (P < 0.05) in the albumen height, Haugh unit (HU), and crude protein content of albumen of layers were noted on week 12 along with dietary UPro addition increasing, and the villus height (VH) and villus height-to-crypt depth radio (VCR) of jejunum also linearly increasing (P < 0.05). In addition, there were linear elevations (P < 0.05) in the relative mRNA expression of Sec23 homolog A (Sec23A) and protein-O-mannosyltransferase1 (POMT1) in layers as dietary UPro addition increased. In conclusion, dietary UPro addition could improve intestinal health, increase the absorption of nutrients, and improve egg quality of laying hens. The possible mechanism underlying UPro improving the quality and processing characteristics of albumen is up-regulating Sec23A and POMT1 expression of magnum. These findings will promote the application of UPro as a new nutritional additive in the production of high-quality eggs.

Chemically modified and conjugated antimicrobial peptides against superbugs

Antimicrobial resistance (AMR) is one of the greatest threats to human health that, by 2050, will lead to more deaths from bacterial infections than cancer. New antimicrobial agents, both broad-spectrum and selective, that do not induce AMR are urgently required. Antimicrobial peptides (AMPs) are a novel class of alternatives that possess potent activity against a wide range of Gram-negative and positive bacteria with little or no capacity to induce AMR. This has stimulated substantial chemical development of novel peptide-based antibiotics possessing improved therapeutic index. This review summarises recent synthetic efforts and their impact on analogue design as well as their various applications in AMP development. It includes modifications that have been reported to enhance antimicrobial activity including lipidation, glycosylation and multimerization through to the broad application of novel bio-orthogonal chemistry, as well as perspectives on the direction of future research. The subject area is primarily the development of next-generation antimicrobial agents through selective, rational chemical modification of AMPs. The review further serves as a guide toward the most promising directions in this field to stimulate broad scientific attention, and will lead to new, effective and selective solutions for the several biomedical challenges to which antimicrobial peptidomimetics are being applied.

Understanding the mechanism of action of peptide (p-BthTX-I)2 derived from C-terminal region of phospholipase A2 (PLA2)-like bothropstoxin-I on Gram-positive and Gram-negative bacteria

Based on the antimicrobial activity of bothropstoxin-I (BthTX-I) and on the premise that a C-terminal peptide of Lys49 myotoxin can reproduce the antimicrobial activity of the parent protein, we aimed to study the mechanism of action of a peptide derived from the C-terminal region of the myotoxin BthTX-I [(p-BthTX-I)₂, sequence: KKYRYHLKPFCKK, disulfide-linked dimer] against Gram-positive and Gram-negative bacteria. Fluorescence quenching technique showed that the carboxyfluorescein labeled-peptide [CF-(p-BthTX-I)₂] when incubated with E. coli displayed a superior penetration activity than when incubated with S. aureus. Cell death induced by the peptide (p-BthTX-I)₂ showed a loss of membrane integrity in E. coli and S. aureus; however, the mechanisms of cell death were different, characterized by the presence of necrosis-like and apoptosis-like deaths, respectively. Scanning electron microscopy studies in E. coli and S. aureus showed morphological changes in the cells, with superficial deformities, appearance of wrinkles and bubbles, and formation of vesicles. Our results demonstrate that the mechanism of action of the peptide (p-BthTX-I)₂ is different in Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Knowledge of the mechanism of action of these peptides is important, since they are promising prototypes for new antimicrobial drugs.

Dimerization of cell-penetrating buforin II enhances antimicrobial properties

Antimicrobial peptides (AMPs) that selectively permeabilize bacterial membranes are promising alternatives to conventional antibiotics. Dimerization of AMP is considered an attractive strategy to enhance antimicrobial and membrane-lytic activity, but it also increases undesired hemolytic and cytotoxic activity. Here, we prepared Lys-linked homodimers of membrane-permeabilizing magainin II and cell-penetrating buforin II. Dimerization did not significantly alter conformational behavior, but it had a substantial impact on antimicrobial properties. We found that while the magainin II dimer showed increased antimicrobial and cytotoxic effects, the buforin II dimer conferred much greater antibacterial potency without exhibiting cytotoxic activity. Interestingly, the buforin II dimer was highly effective against several antibiotic-resistant bacterial isolates. Membrane permeabilization experiments indicated that the magainin II dimer rapidly disrupted both anionic and zwitterionic membranes, whereas the buforin II dimer selectively disrupted anionic membranes. Like the monomeric form, the buforin II dimer was efficiently translocated across lipid bilayers. Therefore, our results suggest that the dimerization of cell-penetrating buforin II not only disrupts the bacterial membrane, but also translocates it across the membrane to target intracellular components, resulting in effective antimicrobial activity. We propose that dimerization of intracellular targeting AMPs may present a superior strategy for therapeutic control of pathogenic bacteria.

Zinc Binding by Histatin 5 Promotes Fungicidal Membrane Disruption in C. albicans and C. glabrata

Histatin 5 (Hst 5) is an antimicrobial peptide produced in human saliva with antifungal activity for opportunistic pathogen Candida albicans. Hst 5 binds to multiple cations including dimerization-inducing zinc (Zn2+), although the function of this capability is incompletely understood. Hst 5 is taken up by C. albicans and acts on intracellular targets under metal-free conditions; however, Zn2+ is abundant in saliva and may functionally affect Hst 5. We hypothesized that Zn2+ binding would induce membrane-disrupting pores through dimerization. Through the use of Hst 5 and two derivatives, P113 (AA 4-15 of Hst 5) and Hst 5ΔMB (AA 1-3 and 15-19 mutated to Glu), we determined that Zn2+ significantly increases killing activity of Hst 5 and P113 for both C. albicans and Candida glabrata. Cell association assays determined that Zn2+ did not impact initial surface binding by the peptides, but Zn2+ did decrease cell association due to active peptide uptake. ATP efflux assays with Zn2+ suggested rapid membrane permeabilization by Hst 5 and P113 and that Zn2+ affinity correlates to higher membrane disruption ability. High-performance liquid chromatography (HPLC) showed that the higher relative Zn2+ affinity of Hst 5 likely promotes dimerization. Together, these results suggest peptide assembly into fungicidal pore structures in the presence of Zn2+, representing a novel mechanism of action that has exciting potential to expand the list of Hst 5-susceptible pathogens.

Role of Toluidine Blue-O Binding Mechanism for Photooxidation in Bioinspired Bacterial Membranes

The alarming increase in bacterial resistance to antibiotics has demanded new strategies for microbial inactivation, which include photodynamic therapy whose activity relies on the photoreaction damage to the microorganism membrane. Herein, the binding mechanisms of the photosensitizer toluidine blue-O (TBO) on simplified models of bacterial membrane with Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) and 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG) were correlated to the effects of the photoinduced lipid oxidation. Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were also used as a reference of mammalian membranes. The surface pressure isotherms combined with polarization-modulated infrared reflection absorption spectroscopy revealed that TBO expands DOPC, DOPE, and DOPG monolayers owing to electrostatic interactions with the negatively charged groups in the phospholipids, with a stronger adsorption on DOPG, which has a net surface charge. Light irradiation made the TBO-containing DOPC and DOPE monolayers less unstable as a result of the singlet oxygen (¹O₂) reaction with the chain unsaturation and hydroperoxide formation. In contrast, the decreased stability of the irradiated TBO-containing DOPG monolayer suggests the cleavage of carbon chains. The anionic nature of DOPG allowed a deeper penetration of TBO into the chain region, favoring contact-dependent reactions between the excited triplet state of TBO and lipid unsaturations or/and hydroperoxide groups, which is the key for the cleavage reactions and further membrane permeabilization.

Study on the effects of different dimerization positions on biological activity of partial d-Amino acid substitution analogues of Anoplin

Antimicrobial peptides have recently attracted much attention due to their broad-spectrum antimicrobial activity, rapid microbial effects, and minimal tendency toward resistance development. In this study, a series of new C-C terminals and C-N terminals dimer peptides were designed and synthesized by intermolecular dimerization of the partial d-amino acid substitution analogues of Anoplin, and the effects of different dimerization positions on biological activity were researched. The antimicrobial activity and stability of the new C-C terminals and C-N terminals dimer peptides were significantly improved compared with their parent peptide Anoplin. They displayed no obvious hemolytic activity and lower cytotoxicity, with a higher therapeutic index. Furthermore, the new dimer peptides not only enabled to rapidly disrupt bacterial membrane and damage its integrity which was different from conventional antibiotics but also penetrated bacterial membrane into binding to intracellular genomic DNA. More importantly, the new dimer peptides showed excellent antimicrobial activity against multidrug-resistant strains isolated from clinics in contrast to conventional antibiotics with low tendency to develop the bacterial resistance, besides they exhibited better anti-biofilm activity than antibiotic Rifampicin. Interestingly, the C-N terminals dimer peptides were superior to C-C terminals ones in antimicrobial and anti-biofilm activity, therapeutic index, outer membrane permeability, and DNA binding ability, whereas there were no noteworthy effects in different dimerization positions on stability. Thus, these data suggested that dimerization in different positions represented a potent strategy to develop novel antimicrobial agents for fighting against increasing bacterial resistance.

Design and synthesis of new N-terminal fatty acid modified-antimicrobial peptide analogues with potent in vitro biological activity

Developing novel antimicrobial agents is a top priority in fighting against bacterial resistance. Thus, a series of new monomer and dimer peptides were designed and synthesized by conjugating fatty acids at the N-terminus of partial d-amino acid substitution analogues of anoplin and dimerization. The new peptides exhibited more efficient killing of gram-negative and gram-positive bacteria, including methicillin-resistant Staphylococcus aureus compared with the parent peptide anoplin, and the dimer peptides were superior to the monomer peptides. It was important that the new peptides displayed low impact on bacterial resistance development. In addition, the antimicrobial activities were not significantly influenced by a physiological salt environment. They also presented high stability in the presence of protease or serum. Almost all of the new peptides had better selectivity towards anionic bacterial membranes over zwitterionic mammalian cell membranes. Moreover, the new peptides displayed synergistic or additive effects when used together with the antibiotics rifampicin and polymyxin B. These results showed that the new peptides could also prevent the formation of bacterial biofilms. Furthermore, outer/inner membrane permeabilization and cytoplasmic membrane depolarization experiments revealed that the new peptides had strong membrane permeabilization and depolarization. Confocal laser scanning microscopy, flow cytometry analysis and scanning electron microscopy further demonstrated that the new peptides could damage the integrity of the bacterial membrane. Finally, a DNA-binding affinity assay showed that the new peptides could bind to bacterial DNA. In summary, the conjugation of fatty acids at the N-terminus of peptides and dimerization are promising strategies for obtaining potent antimicrobial agents.