Fatty acid and quaternary ammonium modified chitosan nanoparticles for insulin delivery

Fatty acid-modified chitosan and nanoencapsulation of essential oils: A snapshot of applications

Chitosan (CS) and its modification with fatty acid (FA) in addition to the nanoencapsulation with essential oils (EOs) have emerged as promising approaches with diverse applications, particularly in food and fruit preservation. This review aims to curate data on the prospects of CS modified with FA as nanostructures, serving as carriers for EOs and its application in the preservation of fruits. A narrative review with no restricted period was used for the general overview of CS and strategies for its modification with FA. Report on CS modified with FA and nanoencapsulation with EO and their applications were appraised. The prospects of CS modified with FA and EO nanoencapsulation in food and fruit preservation were outlined. Most chitosan-fatty acid (CS-FA) studies have found relevance in water, medical and pharmaceutical industries, with few studies on food preservation. CS-FA formulation with EOs shows substantial potential in preserving fruits and will significantly impact the food industry in the future by extending the shelf life of fruits and reducing food waste.

Enhancement of Oral Bioavailability of Protein and Peptide by Polysaccharide-based Nanoparticles

Oral drug delivery is a prevalent and cost-effective method due to its advantages, such as increased drug absorption surface area and improved patient compliance. However, delivering proteins and peptides orally remains a challenge due to their vulnerability to degradation by digestive enzymes, stomach acids, and limited intestinal membrane permeability, resulting in poor bioavailability. The use of nanotechnology has emerged as a promising solution to enhance the bioavailability of these vital therapeutic agents. Polymeric NPs, made from natural or synthetic polymers, are commonly used. Natural polysaccharides, such as alginate, chitosan, dextran, starch, pectin, etc., have gained preference due to their biodegradability, biocompatibility, and versatility in encapsulating various drug types. Their hydrophobic-hydrophilic properties can be tailored to suit different drug molecules.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC₅₀ value of 31.15 μg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

Construction of lipid-biomacromolecular compounds for loading and delivery of carotenoids: Preparation methods, structural properties, and absorption-enhancing mechanisms

Due to the unstable chemical properties and poor water solubility of carotenoids, their processing adaptation and oral bioavailability are poor, limiting their application in hydrophilic food systems. Lipid-biomacromolecular compounds can be excellent carriers for carotenoid delivery by taking full advantage of the solubilization of lipids to non-polar nutrients and the water dispersion and gastrointestinal controlled release properties of biomacromolecules. This paper reviewed the research progress of lipid-biomacromolecular compounds as encapsulation and delivery carriers of carotenoids and summarized the material selection and preparation methods for biomacromolecular compounds. By considering the interaction between the two, this paper briefly discussed the effect of these compounds on carotenoid water solubility, stability, and bioavailability, emphasizing their delivery effect on carotenoids. Finally, various challenges and future trends of lipid-biomacromolecular compounds as carotenoid delivery carriers were discussed, providing new insight into efficient loading and delivery of carotenoids.

Neat Chitosan Porous Materials: A Review of Preparation, Structure Characterization and Application

This review presents an overview of methods for preparing chitosan-derived porous materials and discusses their potential applications. This family of materials has garnered significant attention owing to their biocompatibility, nontoxicity, antibacterial properties, and biodegradability, which make them advantageous in a wide range of applications. Although individual porous chitosan-based materials have been widely discussed in the literature, a summary of all available methods for preparing materials based on pure chitosan, along with their structural characterization and potential applications, has not yet been presented. This review discusses five strategies for fabricating porous chitosan materials, i.e., cryogelation, freeze-drying, sol-gel, phase inversion, and extraction of a porogen agent. Each approach is described in detail with examples related to the preparation of chitosan materials. The influence of the fabrication method on the structure of the obtained material is also highlighted herein. Finally, we discuss the potential applications of the considered materials.

Surveying the Oral Drug Delivery Avenues of Novel Chitosan Derivatives

Chitosan has come a long way in biomedical applications: drug delivery is one of its core areas of imminent application. Chitosan derivatives are the new generation variants of chitosan. These modified chitosans have overcome limitations and progressed in the area of drug delivery. This review briefly surveys the current chitosan derivatives available for biomedical applications. The biomedical applications of chitosan derivatives are revisited and their key inputs for oral drug delivery have been discussed. The limited use of the vast chitosan resources for oral drug delivery applications, speculated to be probably due to the interdisciplinary nature of this research, is pointed out in the discussion. Chitosan-derivative synthesis and practical implementation for oral drug delivery require distinct expertise from chemists and pharmacists. The lack of enthusiasm could be related to the inadequacy in the smooth transfer of the synthesized derivatives to the actual implementers. With thiolated chitosan derivatives predominating the oral delivery of drugs, the need for representation from the vast array of ready-to-use chitosan derivatives is emphasized. There is plenty to explore in this direction.

Influence of Amidation on the Release Profiles of Insulin Drug from Chitosan-Based Matrices

The present study deals with the comparative analysis of insulin drug release from pure chitosan (CS) and its crosslinked amide derivatives. The objective of this study was to investigate the influence of fatty acid derivatives on the release profiles of insulin drug from CS-based matrices. In order to form cross-linked CS-based amide derivatives, the CS biopolymer was reacted with four different fatty acids with varying amount of unsaturation, including stearic acid (SA), oleic acid (OA), linoleic acid (LA), and linolenic acid (LLA), and then subjected to cross-linking. Following this, the pure CS and cross-linked CS amide derivatives were loaded with insulin drug and were characterized thoroughly by making use of various instrumental techniques such as FTIR, UV–Vis, TGA, HRTEM, DLS, PDI, and zeta potential studies. In addition, the insulin release profiles were studied and compared between pure CS and CS amides at two different pHs, 7.4 and 1.2. Finally, the insulin drug release data was investigated with five different pharmacokinetic models (zero, first, Higuchi, Kersmeyer–Peppas, and Hixson models). From the analysis, the cross-linked CS amides was found to be superior to pure CS, and within the amide derivatives, the one with a high amount of unsaturation, LLA-derived CS biopolymer, was shown to be better for the release of insulin drug by means of the diffusion and dissolution pathways.

Amphiphilic Chitosan Bearing Double Palmitoyl Chains and Quaternary Ammonium Moieties as a Nanocarrier for Plasmid DNA

Amphiphilic chitosan, bPalm-CS-HTAP, having N-(2-((2,3-bis(palmitoyloxy)propyl)amino)-2-oxoethyl) (bPalm) groups as double hydrophobic tails and O-[(2-hydroxyl-3-trimethylammonium)] propyl (HTAP) groups as hydrophilic heads was synthesized and evaluated for its self-assembly properties and potential as a gene carrier. The degree of bis-palmitoyl group substitution (DS _bPalm) and the degree of quaternization (DQ) were approximately 2 and 56%, respectively. bPalm-CS-HTAP was found to assemble into nanosized spherical particles with a hydrodynamic diameter (D _H) of 265.5 ± 7.40 nm (PDI = 0.5) and a surface charge potential of 40.1 ± 0.04 mV. bPalm-CS-HTAP condensed the plasmid pVAX1.CoV2RBDme completely at a bPalm-CS-HTAP:pDNA ratio of 2:1. The self-assembled bPalm-CS-HTAP/pDNA complexes could enter HEK 293A and CHO cells and enabled gene expression at negligible cytotoxicity compared to commercial PEI (20 kDa). These results suggested that bPalm-CS-HTAP can be used as a promising nonviral gene carrier.

Chitosan as an Underrated Polymer in Modern Tissue Engineering

Chitosan is one of the most well-known and characterized materials applied in tissue engineering. Due to its unique chemical, biological and physical properties chitosan is frequently used as the main component in a variety of biomaterials such as membranes, scaffolds, drug carriers, hydrogels and, lastly, as a component of bio-ink dedicated to medical applications. Chitosan's chemical structure and presence of active chemical groups allow for modification for tailoring material to meet specific requirements according to intended use such as adequate endurance, mechanical properties or biodegradability time. Chitosan can be blended with natural (gelatin, hyaluronic acid, collagen, silk, alginate, agarose, starch, cellulose, carbon nanotubes, natural rubber latex, κ-carrageenan) and synthetic (PVA, PEO, PVP, PNIPPAm PCL, PLA, PLLA, PAA) polymers as well as with other promising materials such as aloe vera, silica, MMt and many more. Chitosan has several derivates: carboxymethylated, acylated, quaternary ammonium, thiolated, and grafted chitosan. Its versatility and comprehensiveness are confirming by further chitosan utilization as a leading constituent of innovative bio-inks applied for tissue engineering. This review examines all the aspects described above, as well as is focusing on a novel application of chitosan and its modifications, including the 3D bioprinting technique which shows great potential among other techniques applied to biomaterials fabrication.

Insulin- and cholic acid-loaded zein/casein-dextran nanoparticles enhance the oral absorption and hypoglycemic effect of insulin

Diabetes mellitus is the most common metabolic disease in the world. Herein, insulin- and cholic acid-loaded zein nanoparticles with dextran surfaces were fabricated to enhance the oral absorptions of insulin in the intestine and in the liver which is the primary action organ of endogenous insulin. In the nanoparticles, zein acted as cement to embed insulin, cholic acid and casein by hydrophobic interactions. The hydrophilic dextran conjugated to casein by the Maillard reaction was located on the nanoparticle surface. The nanoparticles had an insulin loading efficiency of 74.6%, a cholic acid loading efficiency of 55.1% and a hydrodynamic diameter of 267 nm. The dextran significantly increased the disperse stability of the nanoparticles, protected the loaded insulin from hydrolysis in digestive juices, and increased the trans-mucus permeability of the insulin. The embedded cholic acid molecules were consecutively exposed to the surface when the nanoparticles were gradually eroded by proteases. The exposed cholic acid promoted the absorptions of the nanoparticles in the ileum and liver via bile acid transporters. The effect of pretreated lymphatic transport inhibitor cycloheximide revealed that about half of the nanoparticles were transported via the intestinal lymphatic transport pathway and the other half of the nanoparticles were transported via portal blood absorption. The oral pharmacological bioavailability of the nanoparticles in type I diabetic mice was 12.5-20.5%. This study demonstrates that nanoparticles are a promising oral delivery system for insulin.

Biomedical Applications of Quaternized Chitosan

The natural polymer chitosan is the second most abundant biopolymer on earth after chitin and has been extensively explored for preparation of versatile drug delivery systems. The presence of two distinct reactive functional groups (an amino group at C2, and a primary and secondary hydroxyl group at C3 and C6) of chitosan are involved in the transformation of expedient derivatives such as acylated, alkylated, carboxylated, quaternized and esterified chitosan. Amongst these, quaternized chitosan is preferred in pharmaceutical industries owing to its prominent features including superior water solubility, augmented antimicrobial actions, modified wound healing, pH-sensitive targeting, biocompatibility, and biodegradability. It has been explored in a large realm of pharmaceuticals, cosmeceuticals, and the biomedical arena. Immense classy drug delivery systems containing quaternized chitosan have been intended for tissue engineering, wound healing, gene, and vaccine delivery. This review article outlines synthetic techniques, basic characteristics, inherent properties, biomedical applications, and ubiquitous challenges associated to quaternized chitosan.

Recent perspectives of nanotechnology in burn wounds management: a review

OBJECTIVE

The burden of the management of problematic skin wounds characterised by a compromised skin barrier is growing rapidly. Almost six million patients are affected in the US alone, with an estimated market of $25 billion annually. There is an urgent requirement for efficient mechanism-based treatments and more efficacious drug delivery systems. Novel strategies are needed for faster healing by reducing infection, moisturising the wound, stimulating the healing mechanisms, speeding up wound closure and reducing scar formation.

METHODS

A systematic review of qualitative studies was conducted on the recent perspectives of nanotechnology in burn wounds management. Pubmed, Scopus, EMBASE, CINAHL and PsychINFO databases were all systematically searched. Authors independently rated the reporting of the qualitative studies included. A comprehensive literature search was conducted covering various resources up to 2018-2019. Traditional techniques aim to simply cover the wound without playing any active role in wound healing. However, nanotechnology-based solutions are being used to create multipurpose biomaterials, not only for regeneration and repair, but also for on-demand delivery of specific molecules. The chronic nature and associated complications of nonhealing wounds have led to the emergence of nanotechnology-based therapies that aim at facilitating the healing process and ultimately repairing the injured tissue.

CONCLUSION

Nanotechnology-based therapy is in the forefront of next-generation therapy that is able to advance wound healing of hard-to-heal wounds. In this review, we will highlight the developed nanotechnology-based therapeutic agents and assess the viability and efficacy of each treatment. Herein we will explore the unmet needs and future directions of current technologies, while discussing promising strategies that can advance the wound-healing field.

Assessment of Exenatide loaded Biotinylated Trimethylated Chitosan/HP-55 Nanoparticles

BACKGROUND

Exenatide (EXE) is an anti-hyperglycemic agent approved for treating type 2 diabetes by the Food and Drug Administration (FDA). However, twice-daily injection of exenatide inconveniences most patients.

OBJECTIVE

In this study, biotinylated trimethylated chitosan (Bio-TMC) based nanoparticles were proposed to promote oral absorption of exenatide. Realizing the oral administration of exenatide is very important to alleviate patient suffering and improve patient compliance.

METHODS

Bio-TMC was synthesized, and the chemical structure was characterized by Fourier transform infrared (FT-IR) spectroscopy and 1H NMR spectroscopy. Nanoparticles were prepared through polyelectrolyte interaction in the presence of sodium tripolyphosphate (TPP) and Hydroxypropyl methylcellulose phthalate (HP-55). The formulations were physically and chemically characterized. In vitro release was investigated in different pH media. In vivo antidiabetic activities of biotin modified and non-biotin modified chitosan were evaluated in db/db mice.

RESULTS

EXE-loaded Bio-TMC/HP-55 nanoparticles were spherical in shape with a mean diameter of 156.2 nm and zeta potential of +11.3 mV. The drug loading efficiency and loading contents were 52.38% and 2.08%, respectively. In vitro release revealed that EXE-loaded Bio-TMC/HP-55 nanoparticles were released faster in pH 1.2 than pH 6.8 (63.71% vs. 50.12%), indicating that nanoparticles had enteric characteristics. Antidiabetic activity study revealed that after oral administration to diabetic mice, the relative pharmacological bioavailability (FPharm%) of the biotin modified nanoparticles was found to be 1.27-fold higher compared with the unmodified ones and the hypoglycemic effect was also better.

CONCLUSION

Bio-TMC/HP-55 nanoparticles are feasible as oral drug carriers of exenatide and have the potential to be extended to other drugs that are not readily oral, such as monoclonal antibodies, vaccines, genes, etc., thus, this would be beneficial for pharmaceutical industries. Further research will focus on the biodistribution of Bio-TMC/HP-55 nanoparticles after oral administration.

Advances in chitooligosaccharides chemical modifications

Chitooligosaccharides (COS) differ from chitosan by their molar mass: those of COS are defined to be lower than 20 kg mol^-1 . Their functionalization is widely described in the literature and leads to the introduction of new properties that broaden their application fields. Like chitosan, COS modification sites are mainly primary amine and hydroxyl groups. Among their chemical modification, one can find amidation or esterification, epoxy-amine/hydroxyl coupling, Schiff base formation, and Michael addition. When depolymerized through nitrous deamination, COS bear an aldehyde at the chain end that can open the way to other chemical reactions and lead to the synthesis of new interesting amphiphilic structures. This article details the recent developments in COS functionalization, primarily focusing on amine and hydroxyl groups and aldehyde-chain end reactions, as well as paying considerable attention to other types of modification. We also describe and compare the different functionalization protocols found in the literature while highlighting potential mistakes made in the chemical structures accompanied with suggestions. Such chemical modification can lead to new materials that are generally nontoxic, biobased, biodegradable, and usable in various applications.

Fabrication techniques for the preparation of orally administered insulin nanoparticles

The development of orally administered protein drugs is challenging due to their intrinsic unfavourable features, including large molecular size and poor chemical stability, both of which limit gastrointestinal (GI) absorption efficiency. Nanoparticles can overcome the GI barriers effectively and improve the oral bioavailability of proteins in the GI tract. They possess large surface area to volume ratio, and can facilitate the GI absorption of nanoparticles via the paracellular and transcellular routes. Nanoparticles can be prepared by various fabrication techniques that can encapsulate the fragile therapeutic proteins via hydrophobic bonding and electrostatic interaction. A desirable technique should involve minimal harsh conditions and encapsulate therapeutic proteins with preserved functionalities. The current review examines the characteristics of each preparation technique, and illustrates the examples of insulin-loaded nanoparticles that have been developed in each fabrication method. The following techniques, which include nanoprecipitation, hydrophobic conjugation, flash nanocomplexation, double emulsion, ionotropic gelation, and layer-by-layer adsorption, have been used to formulate ligand-modified nanoparticles for targeted delivery of insulin. Other techniques, including reduction, complex coacervation (polyelectrolyte complexation), hydrophobic ion pairing and emulsion solvent diffusion method, and sol-gel technology, were also discussed in the latter part of the review due to their extensive use in fabrication of insulin nanoparticles. This review also discusses the strategies that have been utilised during the formulation process to improve the stability and bioactivity of therapeutic proteins.

Advances in Subcutaneous Delivery Systems of Biomacromolecular Agents for Diabetes Treatment

Diabetes mellitus is a major threat to human health. Both its incidence and prevalence have been rising steadily over the past few decades. Biomacromolecular agents such as insulin and glucagon-like peptide 1 receptor agonists are commonly used hypoglycemic drugs that play important roles in the treatment of diabetes. However, their traditional frequent administration may cause numerous side effects, such as pain, infection or local tissue necrosis. To address these issues, many novel subcutaneous delivery systems have been developed in recent years. In this review, we survey recent developments in subcutaneous delivery systems of biomacromolecular hypoglycemic drugs, including sustained-release delivery systems and stimuli-responsive delivery systems, and summarize the advantages and limitations of these systems. Future opportunities and challenges are discussed as well.

Quaternary Ammonium Chitosans: The Importance of the Positive Fixed Charge of the Drug Delivery Systems

As a natural polysaccharide, chitosan has good biocompatibility, biodegradability and biosecurity. The hydroxyl and amino groups present in its structure make it an extremely versatile and chemically modifiable material. In recent years, various synthetic strategies have been used to modify chitosan, mainly to solve the problem of its insolubility in neutral physiological fluids. Thus, derivatives with negative or positive fixed charge were synthesized and used to prepare innovative drug delivery systems. Positively charged conjugates showed improved properties compared to unmodified chitosan. In this review the main quaternary ammonium derivatives of chitosan will be considered, their preparation and their applications will be described to evaluate the impact of the positive fixed charge on the improvement of the properties of the drug delivery systems based on these polymers. Furthermore, the performances of the proposed systems resulting from in vitro and ex vivo experiments will be taken into consideration, with particular attention to cytotoxicity of systems, and their ability to promote drug absorption.

Local delivery of insulin/IGF-1 for bone regeneration: carriers, strategies, and effects

Bone defects caused by trauma, tumor resection, congenital malformation and infection are still a major challenge for clinicians. Biomimetic bone materials have attracted more and more attention in science and industry. Insulin and insulin-like growth factor-1 (IGF-1) have been increasingly recognized as an inducible factor for osteogenesis and angiogenesis. Spatiotemporal release of insulin may serve as the promising strategy. Considering the successful application of nanoparticles in drug loading, various insulin delivery systems have been developed, including (poly (lactic-co-glycolic acid), PLGA), hydroxyapatite (HA), gelatin, chitosan, alginate, and (γ-glutamic acid)/β-tricalcium phosphate, γ-PGA/β-TCP). Here, we have reviewed the progress on nanoparticles carrying insulin/IGF for bone regeneration. In addition, the key regulatory mechanism of insulin in bone regeneration is also summarized. The future application strategies and the challenges in bone regeneration are also discussed.

Effect of sustained insulin-releasing device made of poly(ethylene glycol) dimethacrylates on retinal function in streptozotocin-induced diabetic rats

In this study, we developed a subcutaneous insulin-releasing device consisting of a disk-shaped capsule and drug formulation comprised of poly(ethylene glycol) dimethacrylates, then evaluated its efficacy on retinal function in streptozotocin (STZ)-induced diabetic rats. In vitro release studies showed that recombinant human insulin was released with a constant rate for more than 30 days. The device was able to maintain a basal level of blood glucose in diabetic rats for a prolonged period of more than 30 days, simultaneously preventing a decrease in body weight. For assessing the pharmacological effect of the device on retinal function in diabetic rats, electroretinograms were conducted for 12 weeks. The reduction in amplitude and delay in implicit time were attenuated by the device during the initial 4 weeks of application. The increase in gene expression of protein kinase C (PKC)-γ and caspase-3 in the diabetic retina was also attenuated by the device. Immunohistochemistry showed that the increase in glial fibrillary acidic protein expression in the diabetic retina was attenuated by the device. Histological evaluation of subcutaneous tissue around the device showed the biocompatibility of the device. In conclusion, the insulin-releasing device attenuated the reduction of retinal function in STZ-induced diabetic conditions for 4 weeks and the efficacy of the device might be partially related to PKC signaling in the retina. The long-term ability to control the blood glucose level might help to reduce the daily frequency of insulin injections.

Ionic gelated β-cyclodextrin-biotin-carboxymethyl chitosan nanoparticles prepared as carrier for oral delivery of protein drugs

In this paper, the β-cyclodextrin (β-CD) and biotin (Bi) were successfully grafted onto carboxymethyl chitosan (CMCS). And then the β-CD-Bi-CMCS nanoparticles (NPs) were prepared as oral nano-delivery carrier of protein drugs by ionic gelation method. The morphological feature of fabricated drug carrier was determined by dynamic light scattering and transmission electron microscopy. The result showed that the prepared NPs presented spherical structure with an average diameter of 138 nm. Bovine serum albumin (BSA) was selected as model protein drug that was entrapped in prepared drug carrier with satisfactory entrapment efficiency (79.18%) and loading content (3.96%). The drug release profiles of BSA/β-CD-Bi-CMCS NPs were studied at different pH environment for simulated gastric fluid (SGF), simulated intestinal fluid (SIF) and simulated colonic fluid (SCF). It was found that the BSA/β-CD-Bi-CMCS NPs displayed a pH dependent drug release profiles. After 72 h, the cumulative release amount of BSA in SGF, SIF, and SCF was about 20.57, 74.46, and 91%, respectively. Furthermore, the enzymatic degradation and cytotoxicity studies showed the synthesized β-CD-Bi-CMCS NPs had high chemical stability and biocompatibility. This work indicated that the β-CD-Bi-CMCS NPs had the potentiality as promising nanocarriers for oral delivery of protein drugs.

Chitosan-Based Drug Delivery System: Applications in Fish Biotechnology

Chitosan is increasingly used for safe nucleic acid delivery in gene therapy studies, due to well-known properties such as bioadhesion, low toxicity, biodegradability and biocompatibility. Furthermore, chitosan derivatization can be easily performed to improve the solubility and stability of chitosan-nucleic acid polyplexes, and enhance efficient target cell drug delivery, cell uptake, intracellular endosomal escape, unpacking and nuclear import of expression plasmids. As in other fields, chitosan is a promising drug delivery vector with great potential for the fish farming industry. This review highlights state-of-the-art assays using chitosan-based methodologies for delivering nucleic acids into cells, and focuses attention on recent advances in chitosan-mediated gene delivery for fish biotechnology applications. The efficiency of chitosan for gene therapy studies in fish biotechnology is discussed in fields such as fish vaccination against bacterial and viral infection, control of gonadal development and gene overexpression and silencing for overcoming metabolic limitations, such as dependence on protein-rich diets and the low glucose tolerance of farmed fish. Finally, challenges and perspectives on the future developments of chitosan-based gene delivery in fish are also discussed.

Construction of an environmentally friendly octenylsuccinic anhydride modified pH-sensitive chitosan nanoparticle drug delivery system to alleviate inflammation and oxidative stress

An environmentally friendly octenylsuccinic anhydride modified pH-sensitive chitosan-octenylsuccinic anhydride (OSA-CS) was synthesized. The critical micelle concentration (CMC) of the modified chitosan was 27 μg/mL, the graft polymers can form solubilized curcumin (CUR) and quercetin (QUE) nanoparticles. The drug-loaded nanoparticles had high encapsulation efficiency and drug loading content, the self-assembly of graft polymers formed spherical uniform nanoparticles with an approximate diameter of 150-180 nm. The nanoparticles were stable under storage conditions and in serum. The results revealed that OSA-CS exhibited excellent biocompatibility, no cytotoxicity. Additionally, the results of pH sensitivity and drug release experiments showed that the nanoparticles were highly sensitive to weakly acidic conditions (pH 6.0) and showed a faster release rate, while they were reasonably stable at physiological conditions (pH 7.4). The drug-loaded nanoparticles exhibited higher cellular uptake in vitro, and exhibited stronger anti-inflammatory and antioxidant efficacy. Therefore, OSA-CS-based nanoparticles are a promising hydrophobic drug delivery system for pH-response targeting therapy.

Chitosan Derivatives and Their Application in Biomedicine

Chitosan is a product of the deacetylation of chitin, which is widely found in nature. Chitosan is insoluble in water and most organic solvents, which seriously limits both its application scope and applicable fields. However, chitosan contains active functional groups that are liable to chemical reactions; thus, chitosan derivatives can be obtained through the chemical modification of chitosan. The modification of chitosan has been an important aspect of chitosan research, showing a better solubility, pH-sensitive targeting, an increased number of delivery systems, etc. This review summarizes the modification of chitosan by acylation, carboxylation, alkylation, and quaternization in order to improve the water solubility, pH sensitivity, and the targeting of chitosan derivatives. The applications of chitosan derivatives in the antibacterial, sustained slowly release, targeting, and delivery system fields are also described. Chitosan derivatives will have a large impact and show potential in biomedicine for the development of drugs in future.

Bio-nanotechnological advancement of orally administered insulin nanoparticles: Comprehensive review of experimental design for physicochemical characterization

Therapeutic proteins are labile macromolecules that are prone to degradation during production, freeze-drying and storage. Recent studies showed that nanoparticles can enhance the stability and oral bioavailability of encapsulated proteins. Several conventional approaches (enzyme inhibitors, mucoadhesive polymers) and novel strategies (surface modification, ligand conjugation, flash nano-complexation, stimuli-responsive drug delivery systems) have been employed to improve the physiochemical properties of nanoparticles such as size, zeta potential, morphology, polydispersity index, drug release kinetics and cell-targeting capacity. However, clinical translation of protein-based nanoparticle is limited due to poor experimental design, protocol non-compliance and instrumentation set-up that do not reflect the physiological conditions, resulting in difficulties in mass production of nanoparticles and waste in research funding. In order to address the above concerns, we conducted a comprehensive review to examine the experimental designs and conditions for physical characterization of protein-based nanoparticles. Reliable and robust characterization is essential to verify the cellular interactions and therapeutic potential of protein-based nanoparticles. Importantly, there are a number of crucial factors, which include sample treatment, analytical method, dispersants, sampling grid, staining, quantification parameters, temperature, drug concentration and research materials, should be taken into careful consideration. Variations in research protocol and unreasonable conditions that are used in optimization of pharmaceutical formulations can have great impact in result interpretation. Last but not least, we reviewed all novel instrumentations and assays that are available to examine mucus diffusion capacity, stability and bioactivity of protein-based nanoparticles. These include circular dichroism, fourier transform infrared spectroscopy, X-ray diffractogram, UV spectroscopy, differential scanning calorimetry, fluorescence spectrum, Förster resonance energy transfer, NMR spectroscopy, Raman spectroscopy, cellular assays and animal models.

Synthesis, Characterization, and Antifungal Activity of Pyridine-Based Triple Quaternized Chitosan Derivatives

In this study, a series of triple quaternized chitosan derivatives, including 6-O-[(2-hydroxy-3-trimethylammonium)propyl]-2-N-(1-pyridylmethyl-2-ylmethyl)-N,N-dimethyl chitosan chloride (7), 6-O-[(2-hydroxy-3-trimethylammonium)propyl]-2-N-(1-pyridylmethyl-3-yl- methyl)-N,N-dimethyl chitosan chloride (8), and 6-O-[(2-hydroxy-3-trimethylammonium)propyl]- 2-N-(1-pyridylmethyl-4-ylmethyl)-N,N-dimethyl chitosan chloride (9) were successfully designed and synthesized via reacting epoxypropyl trimethylammonium chloride with the N-pyridinium double quaternized chitosan derivatives. Detailed structural characterization was carried out using FT-IR and ¹H-NMR spectroscopy, and elemental analysis. Besides, the activity of the triple quaternized chitosan derivatives against three common plant pathogenic fungi, Watermelon fusarium, Fusarium oxysporum, and Phomopsis asparagi, was investigated in vitro. The results indicated that the triple quaternized chitosan derivatives had enhanced antifungal activity when compared to double quaternized chitosan derivatives and chitosan, especially at 1.0 mg/mL, which confirmed the theory that the higher density of positive charge contributed to the antifungal activity. Moreover, 8 with an almost 99% inhibitory index showed the better antifungal activity against Watermelon fusarium. Moreover, the cytotoxicity of the products was also evaluated in vitro on 3T3-L1 cells and all the triple quaternized chitosan derivatives exhibited low cytotoxicity. These results suggested that triple quaternized chitosan derivatives may be used as good antifungal biomaterials.