Based on reduced graphene oxide-copper sulfide-carbon nitride nanosheets composite electrochemiluminescence sensor for determination of gatifloxacin in mouse plasma

Efficient voltammetric platform combining a molecularly imprinted polymer and silver-nanoparticle-decorated black phosphorus nanosheets for selective determination of Gatifloxacin

An ultrasensitive and selective voltammetric platform combined a molecularly imprinted poly(pyrrole) membrane with Ag-nanoparticle-functionalized black phosphorus nanosheets (MIP/BPNS-AgNPs) was developed for trace GAT detection. The physicochemical properties of the MIP/BPNS-AgNPs were studied by various spectroscopic and electrochemical techniques. BPNS-AgNPs improved the ambient stability and electrochemical activity of the BPNS and possessed a large surface area for accommodating abundant templates to produce specific imprinted sites. The resulting MIP/BPNS-AgNP-modified glassy carbon electrode (GCE) greatly enhanced voltammetric responses for GAT. The MIP/BPNS-AgNP/GCE exhibited admirable GAT determination performance, with two linear responses (0.001-1 and 1-50 μM), high sensitivity (9.965 and 0.5378 μA μM-1), and a low detection limit of 0.2 nM. In addition, the MIP electrode could selectively detect GAT in complex matrices and retain roust responses for a month. The applicability of MIP/BPNS-AgNP/GCE toward the detection of GAT in pharmaceutical formulations, milk, and human serum was verified with satisfactory results.

A novel electrochemiluminescent sensor based on AgMOF@N-CD composites for sensitive detection of trilobatin

In this study, a novel electrochemiluminescent (ECL) sensor for highly sensitive detection of trilobatin (Tri) was developed based on silver metal-organic frameworks (AgMOFs) and nitrogen-doped carbon quantum dots (N-CDs). N-CDs exhibited high ECL intensity but poor ECL stability, while AgMOFs had a large specific surface area, high porosity, and good adsorption properties. Compositing both of them not only improved the ECL stability of N-CDs, but also enhanced the ECL strength of materials, so AgMOF@N-CD composites were used as the luminophore of the sensor. Under the optimized conditions, the ECL sensor showed a linear range of 1.0 × 10-7 M to 1.0 × 10-3 M for the detection of Tri, and the detection limit was as low as 5.99 × 10-8 M (S/N = 3). In addition, the sensor had excellent reproducibility, stability, and anti-interference ability. It could be utilized for the detection of Tri in real samples with recoveries of 95.78-102.26%, indicating that the constructed ECL sensor for detecting Tri possessed better application prospects.

Synthesis of a dual-functional terbium doped copper oxide nanoflowers for high-efficiently electrochemical sensing of ofloxacin, pefloxacin and gatifloxacin

The current effort introduces a facile construction of peony-like CuO:Tb³⁺ nanostructure (P-L CuO:Tb³⁺ NS), whose characterization was determined via techniques of X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. We investigated ofloxacin, pefloxacin and gatifloxacin oxidation electrochemically on P-L CuO:Tb³⁺ NS-modified glassy carbon electrode (P-L CuO:Tb³⁺ NS/GCE), the results of which revealed the irreversible oxidation of drugs through a two-electron oxidation process. An admirable resolution was found for this modified electrode between voltammetric peaks of ofloxacin, pefloxacin and gatifloxacin, suggesting its appropriateness for simultaneous detection of these drugs in pharmaceutical media. In addition, our nanostructure synergistically influenced the electro-catalytic oxidations of these three compounds. Differential pulse voltammetric measurements of ofloxacin, pefloxacin and gatifloxacin through our sensor showed a limit of detection of 1.9, 2.3 and 1.2 nM a as well as a linear dynamic range between 0.01 and 800.0 μM in phosphate buffered solution (0.1 M, pH = 6.0), respectively. Moreover, as-fabricated sensor could successfully co-detect these drugs in real serum and tablets specimens. In addition, since we use animal foods such as milk it is very important to detect their fluoroquinolone residues. For this purpose, the proposed sensor was tested to determine the residues of ofloxacin, pefloxacin and gatifloxacin in milk.

Single-step microwave synthesis of a novel ternary nanocomposite as an efficient luminophore and boron nitride quantum dots as a new coreactant for a cathodic ECL monitoring of chlorpyrifos

In this study, a novel and innovative enzyme-free electrochemiluminescence (ECL) pesticide probe based on a ternary nanocomposite, CuS/CQDs/g-C₃N₄NS, was demonstrated for the accurate monitoring of chlorpyrifos. Boron nitride quantum dots were introduced as a new and effective coreactant in comparison with other coreactants, such as hydrogen peroxide, peroxydisulfate, and tripropylamine, in the negative potential range for the first time. The nanocomposite as a promoted luminophore was synthesized by a one-pot microwave route. Carbon quantum dots and copper sulfide nanostructures were truly incorporated on the porous graphitized carbon nitride, which displayed a good cooperative effect on the signal improvement. CuS as a co-reaction accelerator and CQDs with a superior luminescence effect produced more radical species, and thus, the ECL signal was amplified. Upon increasing the appropriate concentration of this coreactant in electrolyte media, the signal intensity of the nanocomposite increases. A low detection limit of 3.0 × 10^-16 M and a wide range from 2.0 × 10^-15 to 7.0 × 10^-9 M were gained. Also, the fabricated pesticide sensor presented excellent repeatability for 20 consecutive optical signals, with a RSD of about 1.4%. Owing to its high proficiency, the developed sensor was applied as a new probe for chlorpyrifos analysis in water and fruit samples.

A novel electrochemiluminescence aptasensor for sensitive detection of kanamycin based on the synergistic enhancement effects between black phosphorus quantum dots and silver-decorated high-luminescence polydopamine nanospheres

Black phosphorus quantum dots (BPQDs), as a new type of nanomaterial, have excellent electrical and optical properties. In this work, an efficient monitoring method for kanamycin (KAN) was developed based on a sensitive and selective electrochemiluminescence (ECL) aptasensor. The construction of the ECL illuminant was based on BPQDs loaded on silver-nanoparticle modified high-luminescence polydopamine nanospheres (HLPNs@Ag). HLPNs possessed a large specific surface area and strong adhesion, which could support a great deal of BPQDs. Meanwhile, Ag NPs could accelerate the electron-transfer (ET) rate of the sensor and amplify the ECL signal of the BPQDs. Based on the synergistic enhancement effects between the above materials, the as-fabricated nanocomposites exhibited superior ECL performance. With the assistance of a KAN aptamer, the sensor can detect KAN sensitively and selectively. Under optimal conditions, the aptasensor could detect KAN in a wide linear range from 1 × 10^-12 to 1.0 × 10^-7 M with a detection limit of 1.7 × 10^-13 M (S/N = 3). More importantly, this ultra-sensitive and rapid ECL aptasensor-based KAN detection system provided excellent applicability for the monitoring of environmental safety.

Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials

Antibiotics are widely used in the prevention and treatment of infectious diseases in animals due to its bactericidal or bacteriostatic action. Residual antibiotics and their metabolites pose great threats to human and animal health, such as potential carcinogenic and mutagenic effects, and bacterial resistances. Therefore, it is necessary and urgent to accurately monitor trace amounts of antibiotics in food samples. Up to now, many analytical methods have been reported for the determination of antibiotics. Biosensors with the advantages of high sensitivity, rapid response, easy miniaturization, and low price have been widely applied to the detection of antibiotics residues in past decades. This review offered an in-depth evaluation of recognition elements for antibiotic residues in diverse food matrices. In addition, it presented a systematical and critical review on signal amplification via various materials, focusing on recently developed nanomaterials. Finally, the review provided an outlook on the future concepts to help upgrade the sensing techniques for antibiotics in food.

Selective and sensitive determination of celastrol in traditional Chinese medicine based on molecularly imprinted polymers modified Mn-doped ZnS quantum dots optosensing materials

In this work, we proposed a facile strategy to prepare molecularly imprinted polymers (MIPs) modified Mn-doped ZnS quantum dots (QDs) as optosensing materials via sol-gel polymerization for specific recognition of celastrol (Cel) in traditional Chinese medicine (TCM). Firstly, L-Cysteine (L-Cys) modified Mn-doped ZnS QDs (L-Cys@Mn-ZnS) was used as imprinting substrate. The amino and carboxyl groups on the surface of Mn-ZnS QDs can provide more binding sites for imprinting polymerization. Then, the fluorescent MIPs was synthesized in the presence of L-Cys@Mn-ZnS QDs, template celastrol, 3-aminopropyl triethoxysilane (APTES) and ammonium hydroxide in the ethanol-water (9/1, v/v) solution. The morphology and structure of the products were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS). The resulting MIPs functionalized Mn-doped ZnS QDs (denoted as MIPs@L-Cys@Mn-ZnS QDs) had higher imprinting factor of 14.19 and significant selectivity. The MIPs@L-Cys@Mn-ZnS QDs as fluorescent probe exhibited sensitive response to Cel in the linear range from 0.1 μM to 3.5 μM and the limit of detection was estimated to be 35.2 nM. The probe was also applied for the detection of Cel in traditional Chinese medicine with recovery ranged from 88.0%-105.0%. The results confirmed that MIPs@L-Cys@Mn-ZnS QDs could efficiently and specifically capture Cel from actual complex traditional Chinese medicine samples.

Electrochemiluminescent immunoassay for neuron specific enolase by using amino-modified reduced graphene oxide loaded with N-doped carbon quantum dots

An ultrasensitive electrochemiluminescence based sandwich immunoassay is presented for determination of neuron specific enolase. The method uses silver-cysteine nanowires as the capture probe and a composite made of amino-modified reduced graphene oxide and nitrogen-doped carbon quantum dots as the signal probe. It was synthesized by covalent coupling of amino-modified reduced graphene oxide to the carboxy groups of nitrogen-doped carbon quantum dots. The nanowires possess a large specific surface and abundant functional groups which facilitate immobilizing the primary antibody (Ab₁). The amino-modified reduced graphene oxide is employed as a carrier for loading a large number of the quantum dots and secondary antibody (Ab₂). This increases the electrochemiluminescence intensity of quantum dots. Response to neuron specific enolase is linear in the 0.55 fg·mL^-1 to 5.5 ng·mL^-1 concentration range. It has a detection limit of 0.18 fg·mL^-1 (at S/N = 3). The relative standard deviation (for n = 6) is less than 2.9%. The assay is highly sensitive, reproducible, selective and stable. Graphical abstractA novel electrochemiluminescence immunosensor is described that uses amino-modified reduced graphene oxide (amino-rGO), nitrogen-doped carbon quantum dots (N-CQDs) and silver-cysteine nanowires (SCNWs). It was applied to the determination of neuron specific enolase (NSE). Bovine serum albumin: BSA;1-ethyl-3-(3-dimethylaminopropyl)carbodiimide: (EDC;, N-hydroxysuccinimide: NHS.