Preparation and characterization of copper and zinc adsorbed cetylpyridinium and N-lauroylsarcosinate intercalated montmorillonites and their antibacterial activity

The investigation of the binding ability between sodium dodecyl sulfate and Cu (II) in urban stormwater runoff

The simultaneous presence of heavy metals and surfactants in runoff induces complexation and ecological harm during migration. However, interactions between these pollutants are often overlooked in past studies. Thus, investigating heavy metal-surfactant complexes in runoff is imperative. In this work, Cu (II) and sodium dodecyl sulfate (SDS) were selected to investigate the interaction between heavy metals and surfactants due to the higher detected frequency in runoff. Through 1H NMR and FTIR observation of hydrogen atom nuclear displacement and functional group displacement of SDS, the change of SDS and Cu (II) complexation was obtained, and then the complexation form of Cu (II) and SDS was verified. The results showed that solution pH values and ionic strength had significant effects on the complexation of Cu (II). When the pH values increase from 3.0 to 6.0, the complexation efficiency of SDS with Cu (II) increased by 12.12% at low concentration of SDS, which may be attributed to the excessive protonation in the aqueous solution at acidic condition. The increase of ionic strength would inhibit the complexation reaction efficiency by 19.57% and finally reached the platform with concentration of NaNO3 was 0.10 mmol/L, which was mainly due to the competitive relationship between Na (I) and Cu (II). As a general filtering material in stormwater treatment measures, natural zeolite could affect the interaction between SDS and Cu (II) greatly. After the addition of SDS, the content of free Cu (II) in the zeolite-SDS-Cu (II) three-phase mixed system was significantly reduced, indicating that SDS had a positive effect on the removal of Cu (II) from runoff. This study is of great significance for investigating the migration and transformation mechanism of SDS and Cu (II) in the future and studying the control technology of storm runoff pollution.

Synergistic Promotion System of Montmorillonite with Cu2+ and Benzalkonium Chloride for Efficient and Broad-Spectrum Antibacterial Activity

By intercalating montmorillonite (MMT) with Cu2+ and benzalkonium chloride (BAC), the present work constructed a synergistic promotion system (Cu2+/BAC/MMT). MMT not only enhances the thermal stability of Cu2+ and BAC but also facilitates the controlled release of Cu2+ and BAC. Concurrently, the introduction of BAC improves the material's organic compatibility. In vitro assays show that the "MIC+" of Cu2+/BAC/MMT against Staphylococcus aureus is merely 7.32 mg/L and 55.56 mg/L against Escherichia coli. At concentrations of 10 and 25 mg/L, Cu2+/BAC/MMT inactivates 100% of S. aureus and E. coli within 2 h, respectively. Furthermore, it is confirmed that the prepared Cu2+/BAC/MMT exhibits a long-term antibacterial ability through antibacterial experiments and release tests. Also, the biosafety of this material was also substantiated by in vitro cytotoxicity tests. These comprehensive findings indisputably portend that Cu2+/BAC/MMT holds promise to supplant antibiotics as an efficacious treatment modality for bacterial infections.

A Review on Montmorillonite-Based Nanoantimicrobials: State of the Art

One of the crucial challenges of our time is to effectively use metal and metal oxide nanoparticles (NPs) as an alternative way to combat drug-resistant infections. Metal and metal oxide NPs such as Ag, Ag2O, Cu, Cu2O, CuO, and ZnO have found their way against antimicrobial resistance. However, they also suffer from several limitations ranging from toxicity issues to resistance mechanisms by complex structures of bacterial communities, so-called biofilms. In this regard, scientists are urgently looking for convenient approaches to develop heterostructure synergistic nanocomposites which could overcome toxicity issues, enhance antimicrobial activity, improve thermal and mechanical stability, and increase shelf life. These nanocomposites provide a controlled release of bioactive substances into the surrounding medium, are cost effective, reproducible, and scalable for real life applications such as food additives, nanoantimicrobial coating in food technology, food preservation, optical limiters, the bio medical field, and wastewater treatment application. Naturally abundant and non-toxic Montmorillonite (MMT) is a novel support to accommodate NPs, due to its negative surface charge and control release of NPs and ions. At the time of this review, around 250 articles have been published focusing on the incorporation of Ag-, Cu-, and ZnO-based NPs into MMT support and thus furthering their introduction into polymer matrix composites dominantly used for antimicrobial application. Therefore, it is highly relevant to report a comprehensive review of Ag-, Cu-, and ZnO-modified MMT. This review provides a comprehensive overview of MMT-based nanoantimicrobials, particularly dealing with preparation methods, materials characterization, and mechanisms of action, antimicrobial activity on different bacterial strains, real life applications, and environmental and toxicity issues.

Effects of Zinc, Magnesium, and Iron Ions on Bone Tissue Engineering

Large-sized bone defects are a great challenge in clinics and considerably impair the quality of patients' daily life. Tissue engineering strategies using cells, scaffolds, and bioactive molecules to regulate the microenvironment in bone regeneration is a promising approach. Zinc, magnesium, and iron ions are natural elements in bone tissue and participate in many physiological processes of bone metabolism and therefore have great potential for bone tissue engineering and regeneration. In this review, we performed a systematic analysis on the effects of zinc, magnesium, and iron ions in bone tissue engineering. We focus on the role of these ions in properties of scaffolds (mechanical strength, degradation, osteogenesis, antibacterial properties, etc.). We hope that our summary of the current research achievements and our notifications of potential strategies to improve the effects of zinc, magnesium, and iron ions in scaffolds for bone repair and regeneration will find new inspiration and breakthroughs to inspire future research.

The Antimicrobial Properties of Modified Pharmaceutical Bentonite with Zinc and Copper

Pharmaceutical grade bentonite, containing a high amount of montmorillonite, enriched with zinc (Zn) or copper (Cu) (ZnBent and CuBent, respectively) was used as the main component for the creation of formulations for cutaneous use and tested for their antimicrobial capacity. Bentonite (Bent) with added phenoxyethanol (PH) as a preservative and unmodified bentonite were used as control groups. The mineralogical composition, structural state, and physical or chemical properties, before and after the modification of the samples, were characterized utilizing X-ray Diffraction Analysis (XRD), Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Fluorescence (XRF) techniques, and Scanning Electron Microscope-Energy Dispersive Spectroscopy (SEM, SEM-EDS) analyses. In addition, the profile of zinc and copper concentration from two types of surfaces ZnBent and CuBent, and into Phosphate-Buffered Saline (PBS) are discussed. Finally, the formulations in the form of basic pastes were challenged against bacteria, molds, and yeasts, and their performance was evaluated based on the European Pharmacopeia criteria. The Cu-modified bentonite performed excellently against bacteria and yeasts, while the Zn-modified bentonite only showed great results against yeasts. Therefore, Cu-modified bentonite formulations could offer antimicrobial protection without the use of preservatives.

Investigation on Atomic Structure and Mechanical Property of Na- and Mg-Montmorillonite under High Pressure by First-Principles Calculations

Montmorillonite is an important layered phyllosilicate material with many useful physicochemical and mechanical properties, which is widely used in medicine, environmental protection, construction industry, and other fields. In order to a get better understanding of the behavior of montmorillonite under high pressure, we studied its atomic structure, electronic and mechanical properties using density functional theory (DFT), including dispersion corrections, as function of the interlayer Na and Mg cations. At ideal condition, the calculations of lattice constants, bond length, band structure, and elastic modulus of Na- and Mg-montmorillonite are in good agreement with the experimental values. Under high pressure, the lattice constants and major bond lengths decreased with increasing pressure. The calculated electronic properties and band structure show only a slight change under 20 GPa, indicating that the effect of pressure on the electronic properties of Na- and Mg-montmorillonite is weak. The bulk modulus, shear modulus, Young’s modulus, shear wave velocity and compression wave velocity of Na- and Mg-montmorillonite are positively correlated with the external pressure, and the other mechanical parameters have a little change. The calculated studies will be useful to explore experiments in the future from a purely scientific point of view.

A novel detergent-based decellularization combined with carbodiimide crosslinking for improving anti-calcification of bioprosthetic heart valve

Currently, valve replacement surgery is the only therapy for the end-stage valvular diseases because of the inability of regeneration for diseased heart valves. Bioprosthetic heart valves (BHVs), which are mainly derived from glutaraldehyde (GA) crosslinked porcine aortic heart valves or bovine pericardium, have been widely used in the last decades. However, it is inevitable that calcification and deterioration may occur within 10-15 years, which are still the main challenges for the BHVs in clinic. In this study, N-Lauroylsarcosine sodium salt (SLS) combined with N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) were utilized to decellularize and crosslink the heart valves instead of GA treatment. The obtained BHVs exhibited excellent extracellular matrix stability and mechanical properties, which were similar with GA treatment. Moreover, the obtained BHVs exhibited betterin vitrobiocompatibilities than GA treatment. After subcutaneous implantation for 30 d, the obtained BHVs showed mitigated immune response and reduced calcification compare with GA treatment. Therefore, all the above results indicated that the treatment of SLS-based decellularization combined with EDC/NHS crosslink should be a promising method to fabricate BHVs which can be used in clinic in future.

Sorption and mechanism studies of Cu2+, Sr2+ and Pb2+ ions on mesoporous aluminosilicates/zeolite composite sorbents

The research aimed to develop a novel mesoporous aluminosilicate/zeolite composite by the template co-precipitation method. The effect of aluminosilicate (AlSi) and zeolite (NaY) on the basic properties and adsorption capacity of the resultant composite was conducted at different mass ratios of AlSi/NaY (i.e., 5/90, 10/80, 15/85, 20/80, and 50/50). The adsorption characteristics of such composite and its feedstock materials (i.e., aluminosilicates and zeolite) towards radioactive Sr²⁺ ions and toxic metals (Cu²⁺ and Pb²⁺ ions) in aqueous solutions were investigated. Results indicated that BET surface area (S_BET), total pore volume (V_Total), and mesopore volume (V_Meso) of prepared materials followed the decreasing order: aluminosilicate (890 m²/g, 0.680 cm³/g, and 0.644 cm³/g) > zeolite (623 m²/g, 0.352 cm³/g, and 0.111 cm³/g) > AlSi/NaY (20/80) composite (370 m²/g, 0.254 cm³/g, and 0.154 cm³/g, respectively). The Langmuir maximum adsorption capacity (Q_m) of metal ions (Sr²⁺, Cu²⁺, and Pb²⁺) in single-component solution was 260 mg/g, 220 mg/g, and 161 mg/g (for zeolite), 153 mg/g, 37.9 mg/g, and 66.5 mg/g (for aluminosilicate), and 186 mg/g, 140 mg/g, and 77.8 mg/g for (AlSi/NaY (20/80) composite), respectively. Ion exchange was regarded as a domain adsorption mechanism of metal ions in solution by zeolite; meanwhile, inner-surface complexation was domain one for aluminosilicate. Ion exchange and inner-surface complexation might be mainly responsible for adsorbing metal ions onto the AlSi/NaY composite. Pore-filling mechanism was a less important contributor during the adsorption process. The results of competitive adsorption under binary-components (Cu²⁺ and Sr²⁺) and ternary-components (Cu²⁺, Pb²⁺, and Sr²) demonstrated that the removal efficacy of target metals by the aluminosilicate, zeolite, and their composite remarkably decreased. The synthesized AlSi/NaY composite might serve as a promising adsorbent for real water treatment.