Direct incorporation of nano graphene oxide (nGO) into hydrophobic drug crystals for enhanced aqueous dissolution

Synthesis of chiral graphene structures and their comprehensive applications: a critical review

From a molecular viewpoint, chirality is a crucial factor in biological processes. Enantiomers of a molecule have identical chemical and physical properties, but chiral molecules found in species exist in one enantiomer form throughout life, growth, and evolution. Chiral graphene materials have considerable potential for application in various domains because of their unique structural framework, properties, and controlled synthesis, including chiral creation, segregation, and transmission. This review article provides an in-depth analysis of the synthesis of chiral graphene materials reported over the past decade, including chiral nanoribbons, chiral tunneling, chiral dichroism, chiral recognition, and chiral transfer. The second segment focuses on the diverse applications of chiral graphene in biological engineering, electrochemical sensors, and photodetectors. Finally, we discuss research challenges and potential future uses, along with probable outcomes.

Microwave Synthesis of Nanostructured Functionalized Polylactic Acid (nfPLA) for Incorporation Into a Drug Crystals to Enhance Their Dissolution

Active pharmaceutical ingredients that have low aqueous solubility pose a challenge in the field of drug delivery. In this paper we report for the first time the synthesis of nano-structured, hydrophilized polylactic acid (nfPLA) and its application in the delivery of low solubility drugs. Microwave induced acid oxidation was used to generate nfPLA where the oxygen concentration increased from 27.0 percent to 41.0 percent. Also, the original non dispersible PLA was converted to a relatively dispersible form with an average particle size of 131.4 nm and a zeta potential of -23.3 mV. Small quantities of the nfPLA were incorporated into the crystals (0.5 to 2.0 % by weight) of a highly hydrophobic, low solubility antifungal drug Griseofulvin (GF) to form a composite (GF-nfPLA). An antisolvent approach was used for the synthesis of the drug composite. SEM and Raman imaging showed non-uniform distribution of the nfPLA on the crystal surface. The solubility of GF increased from 8.89 µg/mL to as high as 49.67 µg/mL for the GF-nfPLA. At the same time zeta potential changed from -15.4 mV to -39.0 mV, therefore the latter was a relatively stable colloid. Octanol-water partitioning also showed a similar effect as logP reduced from 2.16 for pure GF to 0.55 for GF-nfPLA. In vitro dissolution testing showed six times higher aqueous solubility of GF-nfPLA compared to pure GF. The time for 50 (T50) and 80 % (T80) dissolution reduced significantly for the nfPLA composites; T50 reduced from 40.0 to 14.0 min and T80 reduced form unachievable to 47.0 min. Overall, the PLA which is an FDA approved, bioabsorbable polymer can be used to enhance the dissolution of hydrophobic pharmaceuticals and this can lead to higher efficacy and lower the required dosage for drugs.

Biosensing Systems Based on Graphene Oxide Fluorescence Quenching Effect

Graphene oxide (GO) is a versatile material obtained by the strong oxidation of graphite. Among its peculiar properties, there is the outstanding ability to significantly alter the fluorescence of many common fluorophores and dyes. This property has been exploited in the design of novel switch-ON and switch-OFF fluorescence biosensing platforms for the detection of a plethora of biomolecules, especially pathological biomarkers and environmental contaminants. Currently, novel advanced strategies are being developed for therapeutic, diagnostic and theranostic approaches to widespread pathologies caused by viral or bacterial agents, as well as to cancer. This work illustrates an overview of the most recent applications of GO-based sensing systems relying on its fluorescence quenching effect.

Graphene family in cancer therapy: recent progress in cancer gene/drug delivery applications

In the past few years, the development in the construction and architecture of graphene based nanocomplexes has dramatically accelerated the use of nano-graphene for therapeutic and diagnostic purposes, fostering a new area of nano-cancer therapy. To be specific, nano-graphene is increasingly used in cancer therapy, where diagnosis and treatment are coupled to deal with the clinical difficulties and challenges of this lethal disease. As a distinct family of nanomaterials, graphene derivatives exhibit outstanding structural, mechanical, electrical, optical, and thermal capabilities. Concurrently, they can transport a wide variety of synthetic agents, including medicines and biomolecules, such as nucleic acid sequences (DNA and RNA). Herewith, we first provide an overview of the most effective functionalizing agents for graphene derivatives and afterward discuss the significant improvements in the gene and drug delivery composites based on graphene.

Synthesis of Microwave Functionalized, Nanostructured Polylactic Co-Glycolic Acid (nfPLGA) for Incorporation into Hydrophobic Dexamethasone to Enhance Dissolution

The low solubility and slow dissolution of hydrophobic drugs is a major challenge for the pharmaceutical industry. In this paper, we present the synthesis of surface-functionalized poly(lactic-co-glycolic acid) (PLGA) nanoparticles for incorporation into corticosteroid dexamethasone to improve its in vitro dissolution profile. The PLGA crystals were mixed with a strong acid mixture, and their microwave-assisted reaction led to a high degree of oxidation. The resulting nanostructured, functionalized PLGA (nfPLGA), was quite water-dispersible compared to the original PLGA, which was non-dispersible. SEM-EDS analysis showed 53% surface oxygen concentration in the nfPLGA compared to the original PLGA, which had only 25%. The nfPLGA was incorporated into dexamethasone (DXM) crystals via antisolvent precipitation. Based on SEM, RAMAN, XRD, TGA and DSC measurements, the nfPLGA-incorporated composites retained their original crystal structures and polymorphs. The solubility of DXM after nfPLGA incorporation (DXM-nfPLGA) increased from 6.21 mg/L to as high as 87.1 mg/L and formed a relatively stable suspension with a zeta potential of -44.3 mV. Octanol-water partitioning also showed a similar trend as the logP reduced from 1.96 for pure DXM to 0.24 for DXM-nfPLGA. In vitro dissolution testing showed 14.0 times higher aqueous dissolution of DXM-nfPLGA compared to pure DXM. The time for 50% (T₅₀) and 80% (T₈₀) of gastro medium dissolution decreased significantly for the nfPLGA composites; T₅₀ reduced from 57.0 to 18.0 min and T₈₀ reduced from unachievable to 35.0 min. Overall, the PLGA, which is an FDA-approved, bioabsorbable polymer, can be used to enhance the dissolution of hydrophobic pharmaceuticals and this can lead to higher efficacy and lower required dosage.

Reduction-Hypersensitive Podophyllotoxin Prodrug Self-Assembled Nanoparticles for Cancer Treatment

Podophyllotoxin (PPT) has shown strong antitumor effects on various types of cancers. However, the non-specific toxicity and poor solubility severely limits its clinical transformation. In order to overcome the adverse properties of PPT and explore its clinical potential, three novel PTT−fluorene methanol prodrugs linked by different lengths of disulfide bonds were designed and synthesized. Interestingly, the lengths of the disulfide bond affected the drug release, cytotoxicity, pharmacokinetic characteristics, in vivo biodistribution and antitumor efficacy of prodrug NPs. To be more specific, all three PPT prodrugs could self-assemble into uniform nanoparticles (NPs) with high drug loading (>40%) via the one-step nano precipitation method, which not only avoids the use of surfactants and cosurfactants, but also reduces the systemic toxicity of PPT and increases the tolerated dose. Among the three prodrug NPs, FAP NPs containing α-disulfide bond showed the most sensitive tumor-specific response and fastest drug release rate, thus demonstrating the strongest in vitro cytotoxicity. In addition, three prodrug NPs showed prolonged blood circulation and higher tumor accumulation. Finally, FAP NPs demonstrated the strongest in vivo antitumor activity. Our work will advance the pace of podophyllotoxin towards clinical cancer treatment.

Release of Bioactive Molecules from Graphene Oxide-Alginate Hybrid Hydrogels: Effect of Crosslinking Method

To investigate the influence of crosslinking methods on the releasing performance of hybrid hydrogels, we synthesized two systems consisting of Graphene oxide (GO) as a functional element and alginate as polymer counterpart by means of ionic gelation (physical method, HA−GOP) and radical polymerization (chemical method, HA−GOC). Formulations were optimized to maximize the GO content (2.0 and 1.15% for HA−GOP and HA−GOC, respectively) and Curcumin (CUR) was loaded as a model drug at 2.5, 5.0, and 7.5% (by weight). The physico-chemical characterization confirmed the homogeneous incorporation of GO within the polymer network and the enhanced thermal stability of hybrid vs. blank hydrogels. The determination of swelling profiles showed a higher swelling degree for HA−GOC and a marked pH responsivity due to the COOH functionalities. Moreover, the application of external voltages modified the water affinity of HA−GOC, while they accelerated the degradation of HA−GOP due to the disruption of the crosslinking points and the partial dissolution of alginate. The evaluation of release profiles, extensively analysed by the application of semi-empirical mathematical models, showed a sustained release from hybrid hydrogels, and the possibility to modulate the releasing amount and rate by electro-stimulation of HA−GOC.

Enhanced aqueous dissolution of hydrophobic apixaban via direct incorporation of hydrophilic nanographene oxide

In this study, we have directly incorporated nanographene oxide (nGO) into a hydrophobic drug for enhanced dissolution performance through an antisolvent technique. Apixaban (APX) drug composites were synthesized with nGO incorporation ranging from 0.8% to 2.0% concentration. It was observed that the nGO was successfully embedded without any changes to the original drug crystal structure or physical properties. Dissolution of the drug composites was evaluated using US Pharmacopeia Paddle Method (USP 42). The time needed to reach a 50% release (T₅₀) reduced from 106 min to 24 min with the integration of 1.96% nGO in APX and the T₈₀ also dropped accordingly. Alternatively, dissolution rate showed promising performance with increase in nGO concentration. Initial dissolution rate increased dramatically from 74 µg/min to 540 µg/min. Further, work done in intestinal media revealed T₅₀ went from not dissolving to 79.0 min. Decreased lipophilicity or logP value and increased aqueous solubility are both accredited to hydrophilic nGO water dispersion, producing a hydrophilic channel into the drug crystal surfaces through intermolecular interaction. Additionally, physical, and chemical characterizations confirm that hydrophobic apixaban was successfully transformed into a hydrophilic composite, showing potential for this technology to improve dissolution rate of a model hydrophobic compound.

Investigating the effect of graphene oxide in chitosan/alginate-based foams on the release and antifungal activity of clotrimazole in vitro

Polyelectrolyte complexes (PECs) have been used as the matrix of solid foams for drug delivery. This study aimed at investigating the effect of graphene oxide (GO) and the composition of excipients in chitosan/alginate-based buccal foams on the clotrimazole release and antifungal activities. The investigation has been focused on the interactions of the drug with excipients in the foams, and the changes of ionization degree upon exposure to various media are discussed. The solid foams were prepared by mixing the excipients and clotrimazole via probe sonication, followed by a freeze-drying method. The pH values of the formulations were measured during the foam preparation process to estimate the ionization degree of clotrimazole and the other excipients. The foam matrix was the PECs between the cationic chitosan and anionic alginate. The mechanical strength of clotrimazole-loaded foams was lower than that of drug-free foams due to the positively charged clotrimazole interacting with the anionic alginate and interfering the PECs between chitosan and alginate. Addition of GO in the clotrimazole-loaded matrix made the foams mechanically stronger and contributed to a faster release of clotrimazole from the buccal foams by disrupting the electrostatic interactions between alginate and clotrimazole. However, addition of 1 wt% GO in the formulations didn't affect the antifungal activity of clotrimazole-loaded foams significantly. A lower amount GO in the formulation may be required for enhancing the antifungal effect, which should be further investigated in future.

Hydrophilic and Functionalized Nanographene Oxide Incorporated Faster Dissolving Megestrol Acetate

The aim of this work is to present an approach to enhance the dissolution of progestin medication, megestrol acetate (also known as MEGACE), for improving the dissolution rate and kinetic solubility by incorporating nano graphene oxide (nGO). An antisolvent precipitation process was investigated for nGO-drug composite preparation, where prepared composites showed crystalline properties that were similar to the pure drug but enhanced aqueous dispersibility and colloidal stability. To validate the efficient release profile of composite, in vitro dissolution testing was carried out using United States Pharmacopeia, USP-42 paddle method, with gastric pH (1.4) and intestinal pH (6.5) solutions to mimic in vivo conditions. Pure MA is practically insoluble (2 µg/mL at 37 °C). With the incorporation of nGO, it was possible to dissolve nearly 100% in the assay. With the incorporation of 1.0% of nGO, the time required to dissolve 50% and 80% of drug, namely T₅₀ and T₈₀, decreased from 138.0 min to 27.0 min, and the drug did not dissolve for 97.0 min in gastric media, respectively. Additionally, studies done in intestinal media have revealed T₅₀ did not dissolve for 92.0 min. This work shows promise in incorporating functionalized nanoparticles into the crystal lattice of poorly soluble drugs to improve dissolution rate.

RETRACTED: Pluronic® F127 stabilized reduced graphene oxide hydrogel for the treatment of psoriasis: In vitro and in vivo studies

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editors. Significant similarities were noticed post-publication between this article and an article submitted to the journal on the same day, by an apparently unrelated research group: Hui Li, Yanlu Jia and Chunling Liu, Colloids and Surfaces B: Biointerfaces 195 (2020) 111259 https://doi.org/10.1016/j.colsurfb.2020.111259. Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editors decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. Although this article was published earlier than the article from Colloids and Surfaces B: Biointerfaces 195 (2020) 111259, the Editors decided to retract this article given the concerns on the reliability of the data.

Antisolvent precipitative immobilization of micro and nanostructured griseofulvin on laboratory cultured diatom frustules for enhanced aqueous dissolution

We report for the first time an antisolvent synthesis of nanostructured hydrophobic drug formulation onto a natural diatom. The jewel of the sea, a marine diatom, which is enriched in silicon, was cultured and grown in the laboratory. Its frustules were isolated and purified. The polar functional group on its surface provided unique physical and chemical properties. Griseofulvin (GF), an antifungal drug was used as a model compound was precipitated onto and adsorbed onto hydrophilic diatom surface, while stabilizer hydroxypropyl methyl cellulose (HPMC) was used for restricting particle growth during the composite synthesis. This work demonstrates that the fine drug crystals incorporated onto the diatom silica surface. The structural and morphological properties of the drug was characterized by various techniques. The drug loading of the formulation was estimated to be 41 % by weight. The incorporation of micro/nano crystals on the diatom surface dramatically enhanced the dissolution rate, and lowered the time required for 50 % dissolution for pure drug from 240-58 min for the drug composite, and the time required for 80 % dissolution or T₈₀ was found to be 180 min for the composite while the pure drug reached a maximum of 65 % in 300 min.