Single step immobilization of CMCase within agarose gel matrix: Kinetics and thermodynamic studies

A newly synthesized magnetic nanoparticle coated with glycidyl methacrylate monomer and 1,2,4-Triazole: Immobilization of α-Amylase from Bacillus licheniformis for more reuse, stability, and activity in the presence of H2O2

α-Amylase is a secretory enzyme commonly found in nature. The α-Amylase enzyme catalyzes the hydrolysis of α-D-(1,4)-glucosidic bonds in starch, glycogen, and polysaccharides. The chemical characterization of the composite carrier and the immobilized enzyme was performed, and the accuracy of the immobilization was confirmed by FTIR, SEM, and EDS analyses. The X-ray diffraction (XRD) analysis indicates that the magnetic nanoparticle retained its magnetic properties following the modification process. Based on the Thermogravimetric Analysis (TGA) outcomes, it was evident that the structural integrity of the FPT nanocomposite remained unchanged at 200°C. The optimal pH was determined to be 5.5, and no alteration was observed following the immobilization process. Purified α-amylases usually lose their activity rapidly above 50°C. In this study, Bacillus licheniformis α-Amylase enzyme was covalently immobilized on the newly synthesized magnetic composite carrier having more azole functional group. For novelty-designed immobilized enzymes, while there is no change in the pH and optimum operating temperature of the enzyme with immobilization, two essential advantages are provided to reduce enzyme costs: the storage stability and reusability are increased. Furthermore, our immobilization technique enhanced enzyme stability when comparing our immobilized enzyme with the reference enzyme in industrial applications. The activity of the immobilized enzyme was higher in presence of 1-3% H2O2.

Cyclic extraction of phosphate from soybean meal using immobilized Aspergillus oryzae SBS50 phytase

Phytase enzyme found in plants, animals, and microorganisms is mainly involved in catalyzing the systematic removal of a phosphate group from phytic acid. Enzyme immobilization is one of the cost-effective methods for the wide usage of enzymes in the industrial sector. This paper reports the covalent immobilization of phytase on glutaraldehyde-activated aluminum oxide beads. The immobilization yield, efficiency, and activation energy were found to be 47.8%, 71.5%, and 15.78 J/mol, respectively. The bound enzyme displayed a shift in pH optima from 5.5 to 4.5, which is more beneficial to increase digestibility in comparison with the free enzyme. Immobilized phytase retained 42.60% of its activity after 1.0 h incubation at 80 °C, whereas free enzyme retained only 4.20% of its activity. Thermodynami increase in half-lives, D-values, enthalpy and free energy change after covalent immobilization could be credited to the enhanced stability. Immobilized phytase could be reused for five consecutive cycles retaining 51% of its initial activity with sodium phytate. The immobilized phytase was also found effective to hydrolyze the soybean meal, thus increasing the digestibility of poultry feed. The hydrolyzing reaction of soybean meal was carried out for six consecutive cycles and immobilized phytase retained nearly 50% of activity till the fifth cycle. The amount of phosphorus released after treatment with immobilized phytase was far higher than that from free phytase. Immobilization on this support is significant, as this support can sustain high mechanical resistance at high pH and temperature. This considerable stability and reusability of the bound enzyme may be advantageous for its industrial application.

Combined cross-linked enzyme aggregates of cyclodextrin glucanotransferase and maltogenic amylase from Bacillus lehensis G1 for maltooligosaccharides synthesis

Maltooligosaccharides (MOS) are functional oligosaccharides that can be synthesized through enzymatic cascade reaction between cyclodextrin glucanotransferase (CGTase) and maltogenic amylase (Mag1) from Bacillus lehensis G1. To address the problems of low operational stability and non-reusability of free enzymes, both enzymes were co-immobilized as combined cross-linked enzyme aggregates (Combi-CLEAs-CM) with incorporation of bovine serum albumin (BSA) and Tween 80 (Combi-CLEAs-CM-add). Combi-CLEAs-CM and Combi-CLEAs-CM-add showed activity recoveries of 54.12 % and 69.44 %, respectively after optimization. Combi-CLEAs-CM-add showed higher thermal stability at higher temperatures (40 °C) with longer half-life (46.20 min) as compared to those of free enzymes (36.67 min) and Combi-CLEAs-CM (41.51 min). Both combi-CLEAs also exhibited higher pH stability over pH 5 to pH 9, and displayed excellent reusability with >50 % of initial activity retained after four cycles. The reduction in K_m value of about 22.80 % and 1.76-fold increase in starch hydrolysis in comparison to Combi-CLEAs-CM attested the improvement of enzyme-substrate interaction by Tween 80 and pores formation by BSA in Combi-CLEAs-CM-add. The improved product specificity of Combi-CLEAs-CM-add also produced the highest yield of MOS (492 mg/g) after 3 h. Therefore, Combi-CLEAs-CM-add with ease of preparation, excellent reusability and high operational stability is believed to be highly efficacious biocatalyst for MOS production.

Boosting the stability of β-galactosidase immobilized onto soy-protein isolate-glutaraldehyde-functionalized carrageenan beads

Uncontrolled enzyme-immobilizer interactions were evident after immobilizing β-galactosidase onto soy-protein isolate-glutaraldehyde-functionalized carrageenan beads. Such interactions triggered shortcomings in the immobilized β-galactosidase (iβGL) thermal and storage stabilities. The thermal stability of the iβGL was somewhat lesser than that of the free βGL. Moreover, the iβGL suffered an initial sharp fall-off in its activity after storing it. Thus, approaches were adopted to prevent the occurrence of such uncontrolled enzyme-immobilizer interactions, and accordingly, boost the stability of the iβGL. These approaches involved neutralizing the covalently reactive GA entities via glycine and also altering the functionalizing GA concentrations. Nonetheless, no improvement was recorded in the iβGL thermal stability and this indicated that the uncontrolled enzyme-immobilizer interactions were not mediated via GA. Another approach was then attempted which involved treating the iβGL with lactose. The lactose-treated iβGL (LT-iβGL) presented superior thermal stability as was verified from its smaller k _d and bigger t _1/2 and D-values. The LT-iβGL t _1/2 values were 5.60 and 3.53 fold higher than those presented by the free βGL at 62 and 65 °C, respectively. Moreover, the LT- iβGL presented loftier ΔG than did the free βGL. The storage stability of the LT- iβGL was also superior as it offered 100.41% of its commencing activity on its 43rd storage day. Thus, it could be concluded that lactose prevented the uncontrolled enzyme-immobilizer interactions. Finally, advantageous galacto-oligosaccharides (GOS) were prepared via the iβGL. The GOS were then analyzed with mass spectrometry, and it was shown that their degree of polymerization reached up to 7.

Modelling of urea hydrolysis kinetics using genetic algorithm coupled artificial neural networks in urease immobilized magnetite nanoparticles

The presence of urea in runoff from fertilized soil could be contributing to the growth of dangerous blooms. Enzymatic urea hydrolysis is a well-known outstanding process that, when integrated with nanotechnology, would be much more efficient. This research provides a novel perspective on magnetic nanobiocatalysts that reduce diffusion barriers in effective urea hydrolysis. Surprisingly, the model developed with the use of a Genetic Algorithm (GA) and an Artificial Neural Network (ANN) demonstrated that the system's diffusion restrictions were reduced. In order to forecast accurate outputs using artificial intelligence (AI), a neural network with one hidden layer and 20 neurons was built utilizing multilayer feed-forward network and showed highest output (diffusion co-efficient) with least mean square error (MSE). The diffusion coefficients of free urease, urease immobilized onto porous MNs (U-aMNs), and nanobiocatalyst, i.e. urease immobilized onto surface modified MNs (U-MN_β), were 1.9 × 10^-17, 12.62 × 10^-16, and 15.48 × 10^-16 cm²/min, respectively. These results revealed that the addition of Chitosan to the surface of MNs had a considerable impact on enzyme dispersion. The decrease in Damkohler number (Da) from 2.37 ± 0.26 for U-aMNs to 2.19 ± 0.11 for U-MN_β suggested a beneficial effect in overcoming diffusion constraints. Pseudo-first order and pseudo-second order models were used to analyze urea uptake kinetics, with the former model offering the best fit to the system, with R² values that were much closer to unity.

Polymers as Encapsulating Agents and Delivery Vehicles of Enzymes

Enzymes are versatile biomolecules with broad applications. Since they are biological molecules, they can be easily destabilized when placed in adverse environmental conditions, such as variations in temperature, pH, or ionic strength. In this sense, the use of protective structures, as polymeric capsules, has been an excellent approach to maintain the catalytic stability of enzymes during their application. Thus, in this review, we report the use of polymeric materials as enzyme encapsulation agents, recent technological developments related to this subject, and characterization methodologies and possible applications of the formed bioactive structures. Our search detected that the most explored methods for enzyme encapsulation are ionotropic gelation, spray drying, freeze-drying, nanoprecipitation, and electrospinning. α-chymotrypsin, lysozyme, and β-galactosidase were the most used enzymes in encapsulations, with chitosan and sodium alginate being the main polymers. Furthermore, most studies reported high encapsulation efficiency, enzyme activity maintenance, and stability improvement at pH, temperature, and storage. Therefore, the information presented here shows a direction for the development of encapsulation systems capable of stabilizing different enzymes and obtaining better performance during application.

Thermodynamics, kinetics and optimization of catalytic behavior of polyacrylamide-entrapped carboxymethyl cellulase (CMCase) for prospective industrial use

In the current study, kinetic and thermodynamic parameters of free and polyacrylamide-immobilized CMCase were analyzed. The maximum immobilization yield of 34 ± 1.7% was achieved at 11% acrylamide. The enthalpy of activation (ΔH) of free and immobilized enzyme was found to be 13.61 and 0.29 kJ mol^-1, respectively. Irreversible inactivation energy of free and immobilized CMCase was 96.43 and 99.01 kJ mol^-1, respectively. Similarly, the enthalpy of deactivation (ΔH_d) values for free and immobilized enzyme were found to be in the range of 93.51-93.76 kJ mol^-1 and 96.08-96.33 kJ mol^-1, respectively. Michaelis-Menten constant (K_m) increased from 1.267 ± 0.06 to 1.5891 ± 0.07 mg ml^-1 and the maximum reaction rate (V_max) value decreased (8319.47 ± 416 to 5643.34 ± 282 U ml^-1 min^-1) after immobilization. Due to wide pH and temperature stability profile with sufficient reusing efficiency up to three successive cycles, the immobilized CMCase might be useful for various industrial processes.