CMC determination using isothermal titration calorimetry for five industrially significant non-ionic surfactants

Adsorption of DNA and Aptamers to Sodium Urate Crystals and Inhibition of Crystal Growth

An elevated level of blood uric acid (UA) can cause the formation of kidney stones, gout, and other diseases. We recently isolated a few DNA aptamers that can selectively bind to UA. In this work, we investigated the adsorption of a UA aptamer and random sequence DNA onto sodium urate crystals. Both DNA strands adsorbed similarly to urate crystals. In addition, both the UA aptamer and random DNA can inhibit the growth of urate crystals, suggesting a nonspecific adsorption mechanism rather than specific aptamer binding. In the presence of 500 nM DNA, the growth of needle-like sodium urate crystals was inhibited, and the crystals appeared granular after 6 h. To understand the mechanism of DNA adsorption, a few chemicals were added to desorb DNA. DNA bases contributed more to the adsorption than the phosphate backbone. Surfactants induced significant DNA desorption. Finally, DNA could also be adsorbed onto real UA kidney stones. This study provides essential insights into the interactions between DNA oligonucleotides and urate crystals, including the inhibition of growth and interface effects of DNA on sodium urate crystals.

Combined Effect of Shaking Orbit and Vial Orientation on the Agitation-Induced Aggregation of Proteins

Orbital shaking in a glass vial is a commonly used forced degradation test to evaluate protein propensity for agitation-induced aggregation. Vial shaking in horizontal orientation has been widely recommended to maximize the air-liquid interface area while ensuring solution contact with the stopper. We evaluated the impact of shaking orbit diameter and frequency, and glass vial orientation (horizontal versus vertical) on the aggregation of three proteins prepared in surfactant-free formulation buffers. As soon as an orbit-specific frequency threshold was reached, an increase in turbidity was observed for the three proteins in vertical orientation only when using a 3 mm agitation orbit, and in horizontal orientation only when using a 30 mm agitation orbit. Orthogonal analyses confirmed turbidity was linked to protein aggregation. The most turbid samples had a visually more homogeneous appearance in vertical than in horizontal orientation, in line with the predicted dispersion of air and liquid phases obtained from computational fluid dynamics agitation simulations. Both shaking orbits were used to assess the performance of nonionic surfactants. We show that the propensity of a protein to aggregate in a vial agitated in horizontal or vertical orientation depends on the shaking orbit, and confirm that Brij® 58 and FM1000 prevent proteins from agitation-induced aggregation at lower concentrations than polysorbate 80.

Determining suitable surfactant concentration ranges to avoid protein unfolding in pharmaceutical formulations using UV analysis

Protein stability is fundamental to maintain pharmaceutical efficacy in the nascent field of biologics. One particular property that is essential for therapeutic effect is retention of the folded 3-dimensional conformation, i.e. once unfolding has occurred the biologic is often rendered inactive. In this work we propose a modified form of a recently published UV spectroscopic method that identifies protein unfolding. In this study we determine concentration limits to avoid protein unfolding of two model surfactants, namely polysorbate 20 and polysorbate 80, by correlating surfactant concentration with percentage 'unfolded' for three model proteins. For each scenario two distinct regions were observed, firstly surfactant concentrations at which no unfolding had occurred, followed by a second region whereby unfolding steadily increased with surfactant concentration. In general for the combinations analysed in this study, this second region began to appear around ten times below the critical micellar concentration of each surfactant, regardless of the protein or polysorbate chosen. It is therefore proposed that this adapted method could be used by researchers in the early stages of formulation development as a convenient and simple screening tool to confirm the 'onset of unfolding' concentration for protein-surfactant formulations, thus helping to optimise surfactant concentration selection in pharmaceutical formulations to maintain the benefits of surfactants yet avoid inadvertent unfolding.

Enhancing Oil Solubility of BCS Class II Drug Phenytoin Through Hydrophobic Ion Pairing to Enable High Drug Load in Injectable Nanoemulsion to Prevent Precipitation at Physiological pH With a Potential to Prevent Phlebitis

This work investigates the micellar titration of phenytoin (a weakly acidic drug) with cetyltrimethylammonium hydroxide (CTAH) to form a hydrophobic ion-pair to enhance oil solubility of phenytoin, followed by an effort to formulate nanoemulsion that could potentially prevent precipitation of phenytoin at physiological pH. The ion-pair formulated in nanoemulsion was evaluated for in vitro precipitation during serial dilution at physiological pH. The formation of ion-pair during titration was explained in context of pH-solubility data. The mathematical model successfully integrated ionization and micellization equilibria to reflect on dominant mechanisms for solubilization. The micellar phenomenon during titration was confirmed using Dynamic Light Scattering (DLS). The phase changes of the excess undissolved solids during titration were evident from X-Ray Powder Diffraction (XRPD) and Fourier Transform Infrared Spectroscopy (FTIR). This analysis confirmed the conversion of phenytoin into ionized state and its subsequent ionic interaction with CTAH forming hydrophobic ion-pair complex (HIP). The complete ion pair formation was evident at pHmax (8.8 to 9.2), and its 1:1 stoichiometry was confirmed using HPLC (Phenytoin and CTAH) and H1 NMR, hence could also be called as a lipophilic salt. The ion-pair (salt) was insoluble in water and showed remarkably high partition coefficient (log P) in octanol/water. As characterized by Hot Stage Microscopy (HSM), the melting point of the ion-pair complex was lowered to 150.8⁰C compared to the free acid (> 300οC), this was even further lowered to 81.1 °C when evaluated in castor oil. This led to approximately eight-fold higher solubility of hydrophobic ion pair (HIP) in castor oil compared to the free acid form. The high miscibility in castor oil was suitable to formulate a high drug load injectable dispersed system. This was successfully achieved with lecithin and polysorbate as emulsifiers without leaching drug into continuous phase at pH 7.4. This nanoemulsion (<300 nm, and > +30 mV zeta potential) remain stable when evaluated over a period of one month. A serial dilution study of the nanoemulsion was performed in PBS buffer, microscopic observations suggested no birefringence despite incubation at 25°C for several hours. This result indicated that Phenytoin remained strongly partitioned within dispersed oily phase with a higher drug loading when ion-paired phenytoin was used. The higher drug load could enable a small volume slow bolus injection to meet 50 mg/min or lower delivery rate criteria for Phenytoin in the clinical set up. This provided a pathway to further explore potential injectable nano-emulsion formulations that could alleviate typical phlebitis issue associated with the injectable phenytoin solution administration at physiological pH.

Role of Bovine Serum Albumin Addition in Micellization and Gel Formation of Poloxamer 407

The combination of the thermoresponsive polymer and protein has demonstrated great promise in its applications in drug delivery and tissue engineering fields. This study described the impact of bovine serum albumin (BSA) on the micellization and sol-gel transition behaviors of poloxamer 407 (PX). The micellization of aqueous PX solutions with and without BSA was examined using isothermal titration calorimetry. In the calorimetric titration curves, the pre-micellar region, the transition concentration region, and the post-micellar region were observed. The presence of BSA had no noticeable impact on critical micellization concentration, but the inclusion of BSA caused the pre-micellar region to expand. In addition to studying the self-organization of PX at a particular temperature, the temperature-induced micellization and gelation of PX were also explored using differential scanning calorimetry and rheology. The incorporation of BSA had no discernible effect on critical micellization temperature (CMT), but it did affect gelation temperature (T_gel) and gel integrity of PX-based systems. The response surface approach illustrated the linear relation between the compositions and the CMT. The major factor affecting the CMT of the mixtures was the concentration of PX. The alteration of the T_gel and the gel integrity were discovered to be a consequence of the intricate interaction between PX and BSA. BSA mitigated the inter-micellar entanglements. Hence, the addition of BSA demonstrated a modulating influence on T_gel and a softening effect on gel integrity. Understanding the influence of serum albumin on the self-assembly and gelation of PX will enable the creation of thermoresponsive drug delivery and tissue engineering systems with controlled gelation temperatures and gel strength.

Comprehensive review of the interfacial behavior of water/oil/surfactant systems using dissipative particle dynamics simulation

A comprehensive understanding of interfacial behavior in water/oil/surfactant systems is critical to evaluating the performance of emulsions in various industries, specifically in the oil and gas industry. To gain fundamental knowledge regarding this interfacial behavior, atomistic methods, e.g., molecular dynamics (MD) simulation, can be employed; however, MD simulation cannot handle phenomena that require more than a million atoms. The coarse-grained mesoscale methods were introduced to resolve this issue. One of the most effective mesoscale coarse-grained approaches for simulating colloidal systems is dissipative particle dynamics (DPD), which bridges the gap between macroscopic time and length scales and molecular-scale simulation. This work reviews the fundamentals of DPD simulation and its progress on colloids and interface systems, especially surfactant/water/oil mixtures. The effects of temperature, salt content, a water/oil ratio, a shear rate, and a type of surfactant on the interfacial behavior in water/oil/surfactant systems using DPD simulation are evaluated. In addition, the obtained results are also investigated through the lens of the chemistry of surfactants and emulsions. The outcome of this comprehensive review demonstrates the importance of DPD simulation in various processes with a focus on the colloidal and interfacial behavior of surfactants at water-oil interfaces.

Formulation and Physicochemical and Biological Characterization of Etoposide-Loaded Submicron Emulsions with Biosurfactant of Sophorolipids

Etoposide (ETO), a traditional anticancer chemotherapeutic agent, is commercialized in oral soft gelatin capsules and non-aqueous parenteral solutions form. Novel formulation application and new excipients exploration are needed to improve the water-solubility and comfort of the drug administration. In the present study, novel etoposide-loaded submicron emulsions (ESE) with the biosurfactants of acidic sophorolipid (ASL) and lactonic sophorolipid (LSL) instead of the chemical surfactant of Tween-80 were prepared and characterized. Firstly, parameters of medium-chain triglyceride: long-chain triglyceride (MCT:LCT), lecithin concentration, homogenization pressure and cycle, and type and concentration of surfactants were investigated to optimize the formation of ESEs. Then the physicochemical properties, antitumor activity, stability, and security of ESEs were compared. The results showed that ASL performed the best properties and activities than Tween-80 and LSL in ESE formation. ASL-ESE showed higher drug loading capacity, slower release rate, and significantly increased antitumor activity against ovarian cancer cell line A2780 via apoptosis than Tween-ESE and commercial ETO injection. Besides, both ASL-ESE and Tween-ESE caused no hemolysis, and the safe dose of ASL was 2.14-fold that of Tween-80 in the hemolysis test, making ASL more reliable for drug delivery applications. Furthermore, ASL-ESE exhibited equivalent long-term and autoclaving stability to Tween-ESE. These results thus suggested the excellent competences of ASL in ESE formation, efficacy enhancement, and safety improvement.

Tween-20 Induces the Structural Remodeling of Single Lipid Vesicles

The solubilization of lipid membranes by Tween-20 is crucial for a number of biotechnological applications, but the mechanistic details remain elusive. Evidence from ensemble assays supports a solubilization model that encompasses surfactant association with the membrane and the release of mixed micelles to solution, but whether this process also involves intermediate transitions between regimes is unanswered. In search of mechanistic origins, increasing focus is placed on identifying Tween-20 interactions with controllable membrane mimetics. Here, we employed ultrasensitive biosensing approaches, including single-vesicle spectroscopy based on fluorescence and energy transfer from membrane-encapsulated molecules, to interrogate interactions between Tween-20 and submicrometer-sized vesicles below the optical diffraction limit. We discovered that Tween-20, even at concentrations below the critical micellar concentration, triggers stepwise and phase-dependent structural remodeling events, including permeabilization and swelling, in both freely diffusing and surface-tethered vesicles, highlighting the substantial impact the surfactant has on vesicle conformation and stability prior to lysis.