Cerebral aneurysm flow diverter modeled as a thin inhomogeneous porous medium in hemodynamic simulations

Modeling and evaluation of biomechanics and hemodynamic based on patient-specific small intracranial aneurysm using fluid-structure interaction

BACKGROUND AND OBJECTIVE

Rupture of small intracranial aneurysm (IA) often leads to the development of highly fatal clinical syndromes such as subarachnoid hemorrhage. Due to the patient specificity of small IA, there are many difficulties in evaluating the rupture risk of small IA such as multiple influencing factors, high clinical experience requirements and poor reusability.

METHODS

In this study, clinical methods such as transcranial doppler (TCD) and magnetic resonance imaging (MRI) are used to obtain patient-specific parameters, and the fluid-structure interaction method (FSI) is used to model and evaluate the biomechanics and hemodynamics of patient-specific small IA.

RESULTS

The results show that a spiral vortex stably exists in the patient-specific small IA. Due to the small size of the patient-specific small IA, the blood flow velocity still maintains a high value with maximum reaching 3 m/s. The inertial impact of blood flow and vortex convection have certain influence on hemodynamic and biomechanics parameters. They cause three high value areas of WSSM on the patient-specific small IA with maximum of 180 Pa, 130 Pa and 110 Pa, respectively. They also cause two types of WSS concentration points, positive normal stress peak value areas and negative normal stress peak value areas to appear.

CONCLUSION

This paper found that the factors affecting hemodynamic parameters and biomechanical parameters are different. Unlike hemodynamic parameters, biomechanical parameters are also affected by blood pressure in addition to blood flow velocity. This study reveals the relationship between the flow field distribution and changes of patient-specific small IA, biomechanics and hemodynamics.

AneuGuide™ software-assisted vs. manual measurements in sizing for pipeline embolization device: An agreement study

Sizing of flow diverters (FDs) is a challenging task in the treatment of intracranial aneurysms due to their foreshortening behavior. The purpose of this study is to evaluate the difference between the sizing results from the AneuGuide™ software and from conventional 2D measurement. Ninety-eight consecutive patients undergoing pipeline embolization device (PED) treatment between October 2018 and April 2023 in the First Medical Center of Chinese PLA General Hospital (Beijing, China) were retrospectively analyzed. For all cases, the optimal PED dimensions were both manually determined through 2D measurements on pre-treatment 3D-DSA and computed by AneuGuide™ software. The inter-rater reliability between the two sets of sizing results for each methodology was analyzed using intraclass correlation coefficient (ICC). The degree of agreement between manual sizing and software sizing were analyzed with the Bland-Altman plot and Pearson's test. Differences between two methodologies were analyzed with Wilcoxon signed rank test. Statistical significance was defined as p < 0.05. There was better inter-rater reliability between AneuGuide™ measurements both for diameter (ICC 0.92, 95%CI 0.88-0.95) and length (ICC 0.93, 95%CI 0.89-0.96). Bland-Altman plots showed a good agreement for diameter selection between two methodologies. However, the median length proposed by software group was significantly shorter (16 mm versus 20 mm, p < 0.001). No difference was found for median diameter (4.25 mm versus 4.25 mm). We demonstrated that the AneuGuide™ software provides highly reliable results of PED sizing compared with manual measurement, with a shorter stent length. AneuGuide™ may aid neurointerventionalists in selecting optimal dimensions for FD treatment.

Hemodynamic differences of posterior communicating artery aneurysms between adult and fetal types of posterior cerebral artery

BACKGROUND

The recanalization of posterior communicating artery (PCoA) aneurysms after endovascular treatment has been analyzed by various factors. However, the differences between adult and fetal types of posterior cerebral artery (PCA) have not been fully investigated. The main aim of this study was to investigate hemodynamic differences of PCoA aneurysms between adult and fetal types using computational fluid dynamics (CFD).

METHODS

Fifty-five PCoA aneurysms were evaluated by 3D CT angiography and divided into unruptured aneurysms with adult-type or fetal-type PCAs (19 cases, UA group; 9 cases, UF group) and ruptured aneurysms with adult-type or fetal-type PCAs (17 cases, RA group; 10 cases, RF group). These native aneurysms were analyzed by CFD regarding morphological and hemodynamic characteristics. To evaluate simulated endovascular treatment of aneurysms, CFD was performed using porous media modeling.

RESULTS

Morphologically, the RA group had significantly smaller parent artery diameter (2.91 mm vs. 3.49 mm, p=0.005) and higher size ratio (2.54 vs. 1.78, p=0.023) than the RF group. CFD revealed that the UA group had significantly lower oscillatory shear index (OSI) (0.0032 vs. 0.0078, p=0.004) than the UF group and that the RA group had lower WSS (3.09 vs. 11.10, p=0.001) and higher OSI (0.014 vs. 0.006, p=0.031) than the RF group, while the RF group presented significantly higher intra-aneurysmal flow velocity (0.19 m/s vs. 0.061 m/s, p=0.002) than the RA group. Porous media modeling of simulated treatment revealed higher residual flow volume in the fetal-type groups.

CONCLUSIONS

These results suggested that PCoA aneurysms with fetal-type PCAs had different morphological features and hemodynamic characteristics compared with those with adult-type PCAs, leading to high risks of recanalization.

Numerical Study of a Thrombus Migration Risk in Aneurysm After Coil Embolization in Patient Cases: FSI Modelling

PURPOSE

There are still many challenges for modelling a thrombus migration process in aneurysms. The main novelty of the present research lies in the modelling of aneurysm clot migration process in a realistic cerebral aneurysm, and the analysis of forces suffered by clots inside an aneurysm, through transient FSI simulations.

METHODS

The blood flow has been modelled using a Womersley velocity profile, and following the Carreau viscosity model. Hyperelastic Ogden model has been used for clot and isotropic linear elastic model for the artery walls. The FSI coupled model was implemented in ANSYS® software. The hemodynamic forces suffered by the clot have been quantified using eight different clot sizes and positions inside a real aneurysm.

RESULTS

The obtained results have shown that it is almost impossible for clots adjacent to aneurysm walls, to leave the aneurysm. Nevertheless, in clots positioned in the centre of the aneurysm, there is a real risk of clot migration. The risk of migration of a typical post-coiling intervention clot in an aneurysm, in contact with the wall and occupying a significant percentage of its volume is very low in the case studied, even in the presence of abnormally intense events, associated with sneezes or impacts.

CONCLUSIONS

The proposed methodology allows evaluating the clot migration risk, vital for evaluating the progress after endovascular interventions, it is a step forward in the personalized medicine, patient follow-up, and helping the medical team deciding the optimal treatment.

Influence of stent-induced vessel deformation on hemodynamic feature of bloodstream inside ICA aneurysms

One of the effective treatment options for intracranial aneurysms is stent-assisted coiling. Though, previous works have demonstrated that stent usage would result in the deformation of the local vasculature. The effect of simple stent on the blood hemodynamics is still uncertain. In this work, hemodynamic features of the blood stream on four different ICA aneurysm with/without interventional are investigated. To estimate the relative impacts of vessel deformation, four distinctive ICA aneurysm is simulated by the one-way FSI technique. Four hemodynamic factors of aneurysm blood velocity, wall pressure and WSS are compared in the peak systolic stage to disclose the impact of defamation by the stent in two conditions. The stent usage would decrease almost all of the mentioned parameters, except for OSI. Stenting reduces neck inflow rate, while the effect of interventional was not consistent among the aneurysms. The deformation of an aneurysm has a strong influence on the hemodynamics of an aneurysm. This outcome is ignored by most of the preceding investigations, which focused on the pre-interventional state for studying the relationship between hemodynamics and stents. Present results show that the application of stent without coiling would improve most hemodynamic factors, especially when the deformation of the aneurysm is high enough.

Numerical assessment of hemodynamic perspectives of a left ventricular assist device and subsequent proposal for improvisation

Due to the unavailability of donors, the use of left ventricular assist devices has emerged to be a reliable line of alternative treatment for heart failure. However, ventricular assist devices (VAD) have been associated with several postoperative complications such as thrombosis, hemolysis, etc. Despite considerable improvements in technology, blood trauma due to high shear stress generation has been a major concern that is largely related to the geometrical feature of the VAD. This study aims to establish the design process of a centrifugal pump by considering several variations in the geometrical feature of a base design using the commercial solver ANSYS-CFX. To capture the uncertain behavior of blood as fluid, Newtonian, as well as non-Newtonian (Bird-Carreau model), models are used for flow field prediction. To assess the possibility of blood damage maximum wall shear stress and hemolysis index have been estimated for each operating point. The results of the simulations yield an optimized design of the pump based on parameters like pressure head generation, maximum shear stress, hydraulic efficiency, and hemolysis index. Further, the design methodology and the steps of development discussed in the paper can serve as a guideline for developing small centrifugal pumps handling blood.

Influence of the coiling porosity on the risk reduction of the cerebral aneurysm rupture: computational study

The formation and progress of cerebral aneurysm is highly associated with hemodynamic factors and blood flow feature. In this study, comprehensive efforts are done to investigate the blood hemodynamic effects on the creation and growth of the Internal Carotid Artery. The computational fluid dynamic method is used for the visualization of the bloodstream inside the aneurysm. Transitional, non-Newtonian and incompressible conditions are considered for solving the Navier-Stokes equation to achieve the high-risk region on the aneurysm wall. OSI and WSS of the aneurysm wall are compared within different blood flow stages. The effects of blood viscosity and coiling treatment on these factors are presented in this work. Our study shows that in male patients (HCT = 0.45), changing the porosity of coiling from 0.89 with 0.79 would decreases maximum OSI up to 75% (in maximum acceleration). However, this effect is limited to about 45% for female patients (HCT = 0.35).

[Mathematical modeling of high-flow extra-intracranial bypass in the treatment of a complex cerebral aneurysm]

BACKGROUND

Intracranial aneurysms (IAs) pose a high risk of spontaneous subarachnoid hemorrhage. In the most complex cases, the only way to exclude the aneurysm from the circulation is to perform a high-flow extracranial-to-intracranial bypass, thus creating a new bloodstream. This avoids severe ischemic complications; however, it requires careful consideration of individual anatomy and hemodynamic parameters. Computational fluid dynamics (CFD) can be of great help in planning such a surgery by creating 3D patient-specific models of cerebral circulation.

OBJECTIVE

Assessment of the perspectivity of high-flow extracranial-to-intracranial bypass planning using computational modeling.

MATERIAL AND METHODS

In this research work, we have applied the CFD methods to a patient with a giant thrombosed IA of the internal carotid artery (ICA). Preoperative CTA images and Gamma Multivox workstation were used to create a 3D model with current geometry and three additional models: Normal anatomy (no IA), Occlusion (with ligated ICA), Virtual bypass (with bypass and ligated ICA). The postoperative data were also available. Boundary conditions were based on PC-MRI measurements. Calculation of hemodynamics was conducted with a finite element package ANSYS Workbench 19.

RESULTS

The results demonstrated an increase in the blood flow on the affected side by more than 70% after the virtual surgery and uniformity of flow distribution between the affected and contralateral sides, indicating that the treatment is likely to be efficient. Later, postoperative data confirmed that.

CONCLUSION

The study showed that virtual preoperative CFD modeling could significantly simplify and improve surgical planning.

Realistic computer modelling of stent retriever thrombectomy: a hybrid finite-element analysis-smoothed particle hydrodynamics model

Stent retriever thrombectomy is a pre-eminent treatment modality for large vessel ischaemic stroke. Simulation of thrombectomy could help understand stent and clot mechanics in failed cases and provide a digital testbed for the development of new, safer devices. Here, we present a novel, in silico thrombectomy method using a hybrid finite-element analysis (FEA) and smoothed particle hydrodynamics (SPH). Inspired by its biological structure and components, the blood clot was modelled with the hybrid FEA-SPH method. The Solitaire self-expanding stent was parametrically reconstructed from micro-CT imaging and was modelled as three-dimensional finite beam elements. Our simulation encompassed all steps of mechanical thrombectomy, including stent packaging, delivery and self-expansion into the clot, and clot extraction. To test the feasibility of our method, we simulated clot extraction in simple straight vessels. This was compared against in vitro thrombectomies using the same stent, vessel geometry, and clot size and composition. Comparisons with benchtop tests indicated that our model was able to accurately simulate clot deflection and penetration of stent wires into the clot, the relative movement of the clot and stent during extraction, and clot fragmentation/embolus formation. In this study, we demonstrated that coupling FEA and SPH techniques could realistically model stent retriever thrombectomy.