Transgene integration in plants: poking or patching holes in promiscuous genomes?

Identification of T-DNA structure and insertion site in transgenic crops using targeted capture sequencing

The commercialization of GE crops requires a rigorous safety assessment, which includes a precise DNA level characterization of inserted T-DNA. In the past, several strategies have been developed for identifying T-DNA insertion sites including, Southern blot and different PCR-based methods. However, these methods are often challenging to scale up for screening of dozens of transgenic events and for crops with complex genomes, like potato. Here, we report using target capture sequencing (TCS) to characterize the T-DNA structure and insertion sites of 34 transgenic events in potato. This T-DNA is an 18 kb fragment between left and right borders and carries three resistance (R) genes (RB, Rpi-blb2 and Rpi-vnt1.1 genes) that result in complete resistance to late blight disease. Using TCS, we obtained a high sequence read coverage within the T-DNA and junction regions. We identified the T-DNA breakpoints on either ends for 85% of the transgenic events. About 74% of the transgenic events had their T-DNA with 3R gene sequences intact. The flanking sequences of the T-DNA were from the potato genome for half of the transgenic events, and about a third (11) of the transgenic events have a single T-DNA insertion mapped into the potato genome, of which five events do not interrupt an existing potato gene. The TCS results were confirmed using PCR and Sanger sequencing for 6 of the best transgenic events representing 20% of the transgenic events suitable for regulatory approval. These results demonstrate the wide applicability of TCS for the precise T-DNA insertion characterization in transgenic crops.

Plant DNA Repair and Agrobacterium T-DNA Integration

Agrobacterium species transfer DNA (T-DNA) to plant cells where it may integrate into plant chromosomes. The process of integration is thought to involve invasion and ligation of T-DNA, or its copying, into nicks or breaks in the host genome. Integrated T-DNA often contains, at its junctions with plant DNA, deletions of T-DNA or plant DNA, filler DNA, and/or microhomology between T-DNA and plant DNA pre-integration sites. T-DNA integration is also often associated with major plant genome rearrangements, including inversions and translocations. These characteristics are similar to those often found after repair of DNA breaks, and thus DNA repair mechanisms have frequently been invoked to explain the mechanism of T-DNA integration. However, the involvement of specific plant DNA repair proteins and Agrobacterium proteins in integration remains controversial, with numerous contradictory results reported in the literature. In this review I discuss this literature and comment on many of these studies. I conclude that either multiple known DNA repair pathways can be used for integration, or that some yet unknown pathway must exist to facilitate T-DNA integration into the plant genome.

Recombinase-mediated integration of a multigene cassette in rice leads to stable expression and inheritance of the stacked locus

Efficient methods for multigene transformation are important for developing novel crop varieties. Methods based on random integrations of multiple genes have been successfully used for metabolic engineering in plants. However, efficiency of co-integration and co-expression of the genes could present a bottleneck. Recombinase-mediated integration into the engineered target sites is arguably a more efficient method of targeted integration that leads to the generation of stable transgenic lines at a high rate. This method has the potential to streamline multigene transformation for metabolic engineering and trait stacking in plants. Therefore, empirical testing of transgene(s) stability from the multigene site-specific integration locus is needed. Here, the recombinase technology based on Cre-lox recombination was evaluated for developing multigenic lines harboring constitutively-expressed and inducible genes. Targeted integration of a five genes cassette in the rice genome generated a precise full-length integration of the cassette at a high rate, and the resulting multigenic lines expressed each gene reliably as defined by their promoter activity. The stable constitutive or inducible expression was faithfully transmitted to the progeny, indicating inheritance-stability of the multigene locus. Co-localization of two distinctly inducible genes by heat or cold with the strongly constitutive genes did not appear to interfere with each other's expression pattern. In summary, high rate of co-integration and co-expression of the multigene cassette installed by the recombinase technology in rice shows that this approach is appropriate for multigene transformation and introduction of co-segregating traits.

SIGNIFICANCE STATEMENT

Recombinase-mediated site-specific integration approach was found to be highly efficacious in multigene transformation of rice showing proper regulation of each gene driven by constitutive or inducible promoter. This approach holds promise for streamlining gene stacking in crops and expressing complex multigenic traits.

A Short History and Perspectives on Plant Genetic Transformation

Plant genetic transformation is an important technological advancement in modern science, which has not only facilitated gaining fundamental insights into plant biology but also started a new era in crop improvement and commercial farming. However, for many crop plants, efficient transformation and regeneration still remain a challenge even after more than 30 years of technical developments in this field. Recently, FokI endonuclease-based genome editing applications in plants offered an exciting avenue for augmenting crop productivity but it is mainly dependent on efficient genetic transformation and regeneration, which is a major roadblock for implementing genome editing technology in plants. In this chapter, we have outlined the major historical developments in plant genetic transformation for developing biotech crops. Overall, this field needs innovations in plant tissue culture methods for simplification of operational steps for enhancing the transformation efficiency. Similarly, discovering genes controlling developmental reprogramming and homologous recombination need considerable attention, followed by understanding their role in enhancing genetic transformation efficiency in plants. Further, there is an urgent need for exploring new and low-cost universal delivery systems for DNA/RNA and protein into plants. The advancements in synthetic biology, novel vector systems for precision genome editing and gene integration could potentially bring revolution in crop-genetic potential enhancement for a sustainable future. Therefore, efficient plant transformation system standardization across species holds the key for translating advances in plant molecular biology to crop improvement.

Integration, abundance, and transmission of mutations and transgenes in a series of CRISPR/Cas9 soybean lines

BACKGROUND

As with many plant species, current genome editing strategies in soybean are initiated by stably transforming a gene that encodes an engineered nuclease into the genome. Expression of the transgene results in a double-stranded break and repair at the targeted locus, oftentimes resulting in mutation(s) at the intended site. As soybean is a self-pollinating species with 20 chromosome pairs, the transgene(s) in the T0 plant are generally expected to be unlinked to the targeted mutation(s), and the transgene(s)/mutation(s) should independently assort into the T1 generation, resulting in Mendellian combinations of transgene presence/absence and allelic states within the segregating family. This prediction, however, is not always consistent with observed results.

RESULTS

In this study, we investigated inheritance patterns among three different CRISPR/Cas9 transgenes and their respective induced mutations in segregating soybean families. Next-generation resequencing of four T0 plants and four T1 progeny plants, followed by broader assessments of the segregating families, revealed both expected and unexpected patterns of inheritance among the different lineages. These unexpected patterns included: (1) A family in which T0 transgenes and mutations were not transmitted to progeny; (2) A family with four unlinked transgene insertions, including two respectively located at paralogous CRISPR target break sites; (3) A family in which mutations were observed and transmitted, but without evidence of transgene integration nor transmission.

CONCLUSIONS

Genome resequencing provides high-resolution of transgene integration structures and gene editing events. Segregation patterns of these events can be complicated by several potential mechanisms. This includes, but is not limited to, plant chimeras, multiple unlinked transgene integrations, editing of intended and paralogous targets, linkage between the transgene integration and target site, and transient expression of the editing reagents without transgene integration into the host genome.

Sugarcane Water Stress Tolerance Mechanisms and Its Implications on Developing Biotechnology Solutions

Sugarcane is a unique crop with the ability to accumulate high levels of sugar and is a commercially viable source of biomass for bioelectricity and second-generation bioethanol. Water deficit is the single largest abiotic stress affecting sugarcane productivity and the development of water use efficient and drought tolerant cultivars is an imperative for all major sugarcane producing countries. This review summarizes the physiological and molecular studies on water deficit stress in sugarcane, with the aim to help formulate more effective research strategies for advancing our knowledge on genes and mechanisms underpinning plant response to water stress. We also overview transgenic studies in sugarcane, with an emphasis on the potential strategies to develop superior sugarcane varieties that improve crop productivity in drought-prone environments.

Sugarcane Water Stress Tolerance Mechanisms and Its Implications on Developing Biotechnology Solutions

Sugarcane is a unique crop with the ability to accumulate high levels of sugar and is a commercially viable source of biomass for bioelectricity and second-generation bioethanol. Water deficit is the single largest abiotic stress affecting sugarcane productivity and the development of water use efficient and drought tolerant cultivars is an imperative for all major sugarcane producing countries. This review summarizes the physiological and molecular studies on water deficit stress in sugarcane, with the aim to help formulate more effective research strategies for advancing our knowledge on genes and mechanisms underpinning plant response to water stress. We also overview transgenic studies in sugarcane, with an emphasis on the potential strategies to develop superior sugarcane varieties that improve crop productivity in drought-prone environments.

A comparative analysis of insertional effects in genetically engineered plants: considerations for pre-market assessments

During genetic engineering, DNA is inserted into a plant’s genome, and such insertions are often accompanied by the insertion of additional DNA, deletions and/or rearrangements. These genetic changes are collectively known as insertional effects, and they have the potential to give rise to unintended traits in plants. In addition, there are many other genetic changes that occur in plants both spontaneously and as a result of conventional breeding practices. Genetic changes similar to insertional effects occur in plants, namely as a result of the movement of transposable elements, the repair of double-strand breaks by non-homologous end-joining, and the intracellular transfer of organelle DNA. Based on this similarity, insertional effects should present a similar level of risk as these other genetic changes in plants, and it is within the context of these genetic changes that insertional effects must be considered. Increased familiarity with genetic engineering techniques and advances in molecular analysis techniques have provided us with a greater understanding of the nature and impact of genetic changes in plants, and this can be used to refine pre-market assessments of genetically engineered plants and food and feeds derived from genetically engineered plants.

Mechanism of random integration of foreign DNA in transgenic mice

Little is known about how foreign DNA is randomly integrated into chromosomes in transgenic animals. In the current study, the insertion sites of 36 transgenic mice were mapped by thermal asymmetric interlaced PCR, and 38 junction sequences were obtained from 30 samples. Analysis of the 38 sequences revealed that 44.7 % of integration events occurred within host gene regions, including 13.2 % (5/38) in exonic regions and 31.6 % (12/38) in intronic regions. The results also revealed that all non-end side integrations of foreign DNA were mediated by short sequence homologies (microhomologies) and that the end side integrations occurred in the presence or absence of microhomologies. In addition, microhomology-mediated mechanisms were also confirmed in four transgenic Arabidopsis thaliana lines. The results indicate that foreign DNA is easily integrated into host gene regions. These results also suggest that the integration of both ends of foreign DNA follows the above-mentioned mechanism in many transgenic/transformed organisms.

Evolutionary force of AT-rich repeats to trap genomic and episomal DNAs into the rice genome: lessons from endogenous pararetrovirus

In plant genomes, the incorporation of DNA segments is not a common method of artificial gene transfer. Nevertheless, various segments of pararetroviruses have been found in plant genomes in recent decades. The rice genome contains a number of segments of endogenous rice tungro bacilliform virus-like sequences (ERTBVs), many of which are present between AT dinucleotide repeats (ATrs). Comparison of genomic sequences between two closely related rice subspecies, japonica and indica, allowed us to verify the preferential insertion of ERTBVs into ATrs. In addition to ERTBVs, the comparative analyses showed that ATrs occasionally incorporate repeat sequences including transposable elements, and a wide range of other sequences. Besides the known genomic sequences, the insertion sequences also represented DNAs of unclear origins together with ERTBVs, suggesting that ATrs have integrated episomal DNAs that would have been suspended in the nucleus. Such insertion DNAs might be trapped by ATrs in the genome in a host-dependent manner. Conversely, other simple mono- and dinucleotide sequence repeats (SSR) were less frequently involved in insertion events relative to ATrs. Therefore, ATrs could be regarded as hot spots of double-strand breaks that induce non-homologous end joining. The insertions within ATrs occasionally generated new gene-related sequences or involved structural modifications of existing genes. Likewise, in a comparison between Arabidopsis thaliana and Arabidopsis lyrata, the insertions preferred ATrs to other SSRs. Therefore ATrs in plant genomes could be considered as genomic dumping sites that have trapped various DNA molecules and may have exerted a powerful evolutionary force.

Mass spectrometry in the proteome analysis of mature cereal kernels

In the last decade, the improved performance and versatility of the mass spectrometers together with the increasing availability of gene and genomic sequence database, led the mass spectrometry to become an indispensable tool for either protein and proteome analyses in cereals. Mass spectrometric works on prolamins have rapidly evolved from the determination of the molecular masses of proteins to the proteomic approaches aimed to a large-scale protein identification and study of functional and regulatory aspects of proteins. Mass spectrometry coupled with electrophoresis, chromatographic methods, and bioinformatics tools is currently making significant contributions to a better knowledge of the composition and structure of the cereal proteins and their structure-function relationships. Results obtained using mass spectrometry, including characterization of prolamins, investigation of the gluten toxicity for coeliac patients, identification of proteins responsible of cereal allergies, determination of the protein pattern and its modification under environmental or stress effects, investigation of genetically modified varieties by proteomic approaches, are summarized here, to illustrate current trends, analytical troubles and challenges, and suggest possible future perspectives.

Genetic approaches for studying transgene inheritance and genetic recombination in three successive generations of transformed tobacco

Transgene integration into plant genomes is a complex process accompanied by molecular rearrangements. Classic methods that are normally used to study transgenic population genetics are generally inadequate for assessing such integration. Two major characteristics of transgenic populations are that a transgenic genome may harbor many copies of the transgene and that molecular rearrangements can create an unstable transgenic locus. In this work, we examined the segregation of T1, T2 and T3 transgenic tobacco progenies. Since transfer DNA (T-DNA) contains the NptII selectable marker gene that confers resistance to kanamycin, we used this characteristic in developing a method to estimate the number of functional inserts integrated into the genome. This approach was based on calculation of the theoretical segregation ratios in successive generations. Mendelian ratios of 3:1, 15:1 and 63:1 were confirmed for five transformation events whereas six transformation events yielded non-segregating progenies, a finding that raised questions about causal factors. A second approach based on a maximum likelihood method was performed to estimate recombination frequencies between linked inserts. Recombination estimates varied among transformation events and over generations. Some transgenic loci were unstable and evolved continuously to segregate independently in the T3 generation. Recombination and amplification of the transgene and filler DNA yielded additional transformed genotypes.

Repairing breaks in the plant genome: the importance of keeping it together

DNA damage threatens the integrity of the genome and has potentially lethal consequences for the organism. Plant DNA is under continuous assault from endogenous and environmental factors and effective detection and repair of DNA damage are essential to ensure the stability of the genome. One of the most cytotoxic forms of DNA damage are DNA double-strand breaks (DSBs) which fragment chromosomes. Failure to repair DSBs results in loss of large amounts of genetic information which, following cell division, severely compromises daughter cells that receive fragmented chromosomes. This review will survey recent advances in our understanding of plant responses to chromosomal breaks, including the sources of DNA damage, the detection and signalling of DSBs, mechanisms of DSB repair, the role of chromatin structure in repair, DNA damage signalling and the link between plant recombination pathways and transgene integration. These mechanisms are of critical importance for maintenance of plant genome stability and integrity under stress conditions and provide potential targets for the improvement of crop plants both for stress resistance and for increased precision in the generation of genetically improved varieties.

An affinity-based genome walking method to find transgene integration loci in transgenic genome

Identifying a good transgenic event from the pool of putative transgenics is crucial for further characterization. In transgenic plants, the transgene can integrate in either single or multiple locations by disrupting the endogenes and/or in heterochromatin regions causing the positional effect. Apart from this, to protect the unauthorized use of transgenic plants, the signature of transgene integration for every commercial transgenic event needs to be characterized. Here we show an affinity-based genome walking method, named locus-finding (LF) PCR (polymerase chain reaction), to determine the transgene flanking sequences of rice plants transformed by Agrobacterium tumefaciens. LF PCR includes a primary PCR by a degenerated primer and transfer DNA (T-DNA)-specific primer, a nested PCR, and a method of enriching the desired amplicons by using a biotin-tagged primer that is complementary to the T-DNA. This enrichment technique separates the single strands of desired amplicons from the off-target amplicons, reducing the template complexity by several orders of magnitude. We analyzed eight transgenic rice plants and found the transgene integration loci in three different chromosomes. The characteristic illegitimate recombination of the Agrobacterium sp. was also observed from the sequenced integration loci. We believe that the LF PCR should be an indispensable technique in transgenic analysis.

Are apparent negative effects of feeding GM MON810 maize to Atlantic salmon, Salmo salar, caused by confounding factors?

The present study was conducted to follow up on apparent differences in growth, relative organ sizes, cellular stress and immune function in Atlantic salmon fed feed containing GM Bacillus thuringiensis maize compared with feed containing the non-modified parental maize line. Gene expression profiling on the distal intestinal segment and liver was performed by microarray, and selected genes were followed up by quantitative PCR (qPCR). In the liver, qPCR revealed some differentially regulated genes, including up-regulation of gelsolin precursor, down-regulation of ferritin heavy subunit and a tendency towards down-regulation of metallothionein (MT)-B. This, combined with the up-regulation of anti-apoptotic protein NR13 and similar tendencies for ferritin heavy chain and MT-A and -B in the distal intestine, suggests changes in cellular stress/antioxidant status. This corresponds well with and strengthens previous findings in these fish. To exclude possible confounding factors, the maize ingredients were analysed for mycotoxins and metabolites. The GM maize contained 90 μg/kg of deoxynivalenol (DON), while the non-GM maize was below the detection limit. Differences were also observed in the metabolite profiles of the two maize varieties, some of which seemed connected to the mycotoxin level. The effects on salmon observed in the present and previous studies correspond relatively well with the effects of DON as reported in the literature for other production animals, but knowledge regarding effects and harmful dose levels in fish is scarce. Thus, it is difficult to conclude whether the observed effects are caused by the DON level or by some other aspect of the GM maize ingredient.

The mutational consequences of plant transformation

Plant transformation is a genetic engineering tool for introducing transgenes into plant genomes. It is now being used for the breeding of commercial crops. A central feature of transformation is insertion of the transgene into plant chromosomal DNA. Transgene insertion is infrequently, if ever, a precise event. Mutations found at transgene insertion sites include deletions and rearrangements of host chromosomal DNA and introduction of superfluous DNA. Insertion sites introduced using Agrobacterium tumefaciens tend to have simpler structures but can be associated with extensive chromosomal rearrangements, while those of particle bombardment appear invariably to be associated with deletion and extensive scrambling of inserted and chromosomal DNA. Ancillary procedures associated with plant transformation, including tissue culture and infection with A tumefaciens, can also introduce mutations. These genome-wide mutations can number from hundreds to many thousands per diploid genome. Despite the fact that confidence in the safety and dependability of crop species rests significantly on their genetic integrity, the frequency of transformation-induced mutations and their importance as potential biosafety hazards are poorly understood.

NMR metabolic profiling of transgenic maize with the Cry1Ab gene

The metabolic profiles of seeds from the transgenic maize variety 33P67 and of the corresponding traditional variety were investigated using one- and two-dimensional NMR techniques. The transgenic variety carries a functional Cry1A(b) gene, which confers to the plant the ability to produce Bt insect toxin. About 40 water-soluble metabolites in the maize seed extracts were identified, providing a more complete (1)H and (13)C NMR assignment with respect to the assignment reported in the literature. In particular ethanol, lactic acid, citric acid, lysine, arginine, glycine-betaine, raffinose, trehalose, alpha-galactose, and adenine were identified for the first time in the (1)H NMR spectrum of maize seeds extracts. The (1)H spectra of transgenic and nontransgenic seed maize samples turned out to be conservative, showing the same signals and therefore the same metabolites. However, a higher concentration of ethanol, citric acid, glycine-betaine, trehalose, as well as of another compound not yet completely identified, was observed in the transgenic extracts than in nontransgenic samples. So, it was possible to discriminate between transgenic and nontransgenic metabolic profilings through the use of an appropriate statistical analysis.

Agrobacterium-mediated transformation of tomato elicits unexpected flower phenotypes with similar gene expression profiles

Background

Genetic transformation mediated by Agrobacterium tumefaciens is known to cause unexpected phenotypes. Mutations of a specific set of homeotic genes can result in alterred floral structure.

Methodology/Principal Findings

Previously we identified two genes (LeTGA1 and SOLly GLB1) induced by nutrient availability in tomato. To further elucidate their function, we sought to knock out the genes using antisense RNAi. When antisense constructs for the two different tomato genes were each transformed into Micro-Tina tomato plants, one primary transformant with similar mutant flower phenotypes was identified from transformation of each construct. Microarray analysis shows that a similar set of genes were up- or downregulated in both mutants. Sequencing of insertion sites indicates that each is inserted into a repetitive region which could impact expression of affected genes but direct alteration of floral homeotic gene sequences was not detected.

Conclusion

This is the first report that dominant flower mutations could be caused by genetic transformation designed to knock out two nutrient stress related genes.

Characterisation of 3' transgene insertion site and derived mRNAs in MON810 YieldGard maize

The construct inserted in YieldGard MON810 maize, produced by Monsanto, contains the CaMV 35S promoter, the hsp70 intron of maize, the cryI(A)b gene for resistance to lepidopterans and the NOS terminator. In a previous work a truncation event at the 3' end of the cryI(A)b gene leading to the complete loss of the NOS terminator was demonstrated. The 3' maize genome junction region was isolated in the same experiment not showing any homology with known sequences. The aim of the experiments here reported was therefore to isolate and characterize a larger portion of the 3' integration junction from genomic DNA of two commercial MON810 maize lines. Specific primers were designed on the 3' integration junction sequence for the amplification of a 476 bp fragment downstream of the sequence previously detected. In silico analysis identified the whole isolated 3' genomic region as a gene putatively coding for the HECT E3 ubiquitin ligase. RT-PCR performed in this region produced cDNA variants of different length. In silico translation of these transcripts identified 2 and 18 putative additional aminoacids in different variants, all derived from the adjacent host genomic sequences, added to the truncated CRY1A protein. These putative recombinant proteins did not show homology with any known protein domains. Our data gave new insights on the genomic organization of MON810 in the YieldGard maize and confirmed the previous suggestion that the integration in the genome of maize caused a complex recombination event without, apparently, interfering with the activity of the partial CRY1A endotoxin and both the vigor and yield of the YieldGard maize.

Proteomics as a complementary tool for identifying unintended side effects occurring in transgenic maize seeds as a result of genetic modifications

To improve the probability of detecting unintended side effects during maize gene manipulations by bombardment, proteomics was used as an analytical tool complementary to the existing safety assessment techniques. Since seed proteome is highly dynamic, depending on the species variability and environmental influence, we analyzed the proteomic profiles of one transgenic maize variety (event MON 810) in two subsequent generations (T05 and T06) with their respective isogenic controls (WT05 and WT06). Thus, by comparing the proteomic profiles of WT05 with WT06 we could determine the environmental effects, while the comparison between WT06 and T06 seeds from plants grown under controlled conditions enabled us to investigate the effects of DNA manipulation. Finally, by comparison of T05 with T06 seed proteomes, it was possible to get some indications about similarities and differences between the adaptations of transgenic and isogenic plants to the same strictly controlled growth environment. Approximately 100 total proteins resulted differentially modulated in the expression level as a consequence of the environmental influence (WT06 vs WT05), whereas 43 proteins resulted up- or down-regulated in transgenic seeds with respect to their controls (T06 vs WT06), which could be specifically related to the insertion of a single gene into a maize genome by particle bombardment. Transgenic seeds responded differentially to the same environment as compared to their respective isogenic controls, as a result of the genome rearrangement derived from gene insertion. To conclude, an exhaustive differential proteomic analysis allows to determine similarities and differences between traditional food and new products (substantial equivalence), and a case-by-case assessment of the new food should be carried out in order to have a wide knowledge of its features.

Extrachromosomal circular DNA derived from tandemly repeated genomic sequences in plants

Extrachromosomal circular DNA (eccDNA) is one characteristic of the plasticity of the eukaryotic genome. It was found in various non-plant organisms from yeast to humans. EccDNA is heterogeneous in size and contains sequences derived primarily from repetitive chromosomal DNA. Here, we report the occurrence of eccDNA in small and large genome plant species, as identified using two-dimensional gel electrophoresis. We show that eccDNA is readily detected in both Arabidopsis thaliana and Brachycome dichromosomatica, reflecting a normal phenomenon that occurs in wild-type plants. The size of plant eccDNA ranges from > 2 kb to < 20 kb, which is similar to the sizes found in other organisms. These DNA molecules correspond to 5S ribosomal DNA (rDNA), non-coding chromosomal high-copy tandem repeats and telomeric DNA of both species. Circular multimers of the repeating unit of 5S rDNA were identified in both species. In addition, similar multimers were also demonstrated with the B. dichromosomatica repetitive element Bdm29. Such circular multimers of tandem repeats were found in animal models, suggesting a common mechanism for eccDNA formation among eukaryotes. This mechanism may involve looping-out via intrachromosomal homologous recombination. The implications of these results on genome plasticity and evolutionary processes are discussed.

The nitrate reductase gene-switch: a system for regulated expression in transformed cells of Dunaliella salina

The control of promoter activity by nitrogen source has recently emerged as an intriguing system for regulated expression of the heterologous genes. The purpose of this work was to investigate whether heterologous gene expression in transgenic Dunaliella salina would be controlled by an inducible promoter. Here we identify that the nitrate reductase (NR) transcripts of D. salina are induced by nitrate but repressed by ammonium. The bar gene integrated into the genome of D. salina is transcribed by a promoter of the NR gene from D. salina and the bar transcripts are induced by nitrate but repressed by ammonium. PPT-resistance of transformants disappears when they are transferred from nitrate-containing medium to ammonium-containing medium. The findings of this study demonstrate that the promoter of the D. salina NR gene can be used to control expression of the heterologous genes in transgenic D. salina.

Gene targeting by homologous recombination as a biotechnological tool for rice functional genomics

The modification of an endogenous gene into a designed sequence by homologous recombination, termed gene targeting (GT), has broad implications for basic and applied research. Rice (Oryza sativa), with a sequenced genome of 389 Mb, is one of the most important crops and a model plant for cereals, and the single-copy gene Waxy on chromosome 6 has been modified with a frequency of 1% per surviving callus by GT using a strong positive-negative selection. Because the strategy is independent of gene-specific selection or screening, it is in principle applicable to any gene. However, a gene in the multigene family or a gene carrying repetitive sequences may preclude efficient homologous recombination-promoted GT due to the occurrence of ectopic recombination. Here, we describe an improved GT procedure whereby we obtained nine independent transformed calli having the alcohol dehydrogenase2 (Adh2) gene modified with a frequency of approximately 2% per surviving callus and subsequently isolated eight fertile transgenic plants without the concomitant occurrence of undesirable ectopic events, even though the rice genome carries four Adh genes, including a newly characterized Adh3 gene, and a copy of highly repetitive retroelements is present adjacent to the Adh2 gene. The results indicate that GT using a strong positive-negative selection can be widely applicable to functional genomics in rice and presumably in other higher plants.

Optimization of human papillomavirus type 16 (HPV-16) L1 expression in plants: comparison of the suitability of different HPV-16 L1 gene variants and different cell-compartment localization

Virus-like particle-based vaccines for high-risk human papillomaviruses (HPVs) appear to have great promise; however, cell culture-derived vaccines will probably be very expensive. The optimization of expression of different codon-optimized versions of the HPV-16 L1 capsid protein gene in plants has been explored by means of transient expression from a novel suite of Agrobacterium tumefaciens binary expression vectors, which allow targeting of recombinant protein to the cytoplasm, endoplasmic reticulum (ER) or chloroplasts. A gene resynthesized to reflect human codon usage expresses better than the native gene, which expresses better than a plant-optimized gene. Moreover, chloroplast localization allows significantly higher levels of accumulation of L1 protein than does cytoplasmic localization, whilst ER retention was least successful. High levels of L1 (>17% total soluble protein) could be produced via transient expression: the protein assembled into higher-order structures visible by electron microscopy, and a concentrated extract was highly immunogenic in mice after subcutaneous injection and elicited high-titre neutralizing antibodies. Transgenic tobacco plants expressing a human codon-optimized gene linked to a chloroplast-targeting signal expressed L1 at levels up to 11% of the total soluble protein. These are the highest levels of HPV L1 expression reported for plants: these results, and the excellent immunogenicity of the product, significantly improve the prospects of making a conventional HPV vaccine by this means.

Environment arrays: a possible approach for predicting changes in waterborne bacterial disease potential

Current molecular techniques for identifying bacteria in water have proven useful, but they are not reliably predictive of impending disease outbreaks. Genomics-based approaches will help to detect the presence of pathogens quickly and well before they grow into a population that poses a risk to public health. We suggest that genomics is only one component of the toolbox that will be needed to identify emerging waterborne threats. We propose a methodology beyond genomics, based on activity in the mobile genome. This approach makes use of a new device called an environment array. The array will depend upon the same research necessary for genomics-based detection, but will not require an a priori knowledge of virulence genes. Environment arrays are assembled from molecular profiles of the infectious elements that transfer between bacteria. The advantage of the array is that it monitors the activity of the mobile genome, rather than the presence of particular DNA sequences. Environmental arrays should thus be many times more sensitive than traditional hybridization or PCR-based techniques that target already-known DNA sequences. Mobile elements are known to respond to new environmental conditions that may correlate with a chemical contamination or the bloom of bacterial pathogens, potentially allowing for a much broader application in detecting unknown or unanticipated biological and chemical contaminants.

Association of Arabidopsis topoisomerase IIA cleavage sites with functional genomic elements and T-DNA loci

Topoisomerase IIA (Topo IIA) is an essential ubiquitous enzyme involved in controlling DNA topology during multiple processes of genome function, and has been implicated in the generation of double-stranded breaks (DSB) in genomic DNA prior to DNA integration in plant genomes. Despite extensive characterization of type II topoisomerases from bacteria, viruses and animals, no studies on the specificity of plant Topo IIA-mediated DNA cleavage have been reported. We mapped and characterized Arabidopsis thaliana Topo IIA (AtTopoIIA) cleavage sites and demonstrated that they were cleaved in vivo. The consensus for the AtTopoIIA cleavage sites (ANNNRN downward arrowGTACNTNNNY) was significantly different from recognition sequences reported for Topo IIA from other organisms. The mapped cleavage sites were abundant in the Arabidopsis genome, exhibited a weak consensus, and were cleaved with relatively low efficiency. Use of the systematic evolution of ligands by exponential enrichment (SELEX) protocol identified a single, efficiently cleaved sequence TATATATATGTATATATATA that was over-represented in the genome. The mapped AtTopoIIA cleavage sites and the SELEX sites differed in their genomic distribution and associations with gene regulatory elements, matrix attachment regions, stress-induced DNA duplex destabilization sequences and T-DNA loci, suggesting different genome functions. Mapped AtTopoIIA sites but not SELEX sites were strongly associated with T-DNA integration sites, providing evidence for the involvement of AtTopoIIA-mediated DSB formation in T-DNA integration.

In situ methods to localize transgenes and transcripts in interphase nuclei: a tool for transgenic plant research

Genetic engineering of commercially important crops has become routine in many laboratories. However, the inability to predict where a transgene will integrate and to efficiently select plants with stable levels of transgenic expression remains a limitation of this technology. Fluorescence in situ hybridization (FISH) is a powerful technique that can be used to visualize transgene integration sites and provide a better understanding of transgene behavior. Studies using FISH to characterize transgene integration have focused primarily on metaphase chromosomes, because the number and position of integration sites on the chromosomes are more easily determined at this stage. However gene (and transgene) expression occurs mainly during interphase. In order to accurately predict the activity of a transgene, it is critical to understand its location and dynamics in the three-dimensional interphase nucleus. We and others have developed in situ methods to visualize transgenes (including single copy genes) and their transcripts during interphase from different tissues and plant species. These techniques reduce the time necessary for characterization of transgene integration by eliminating the need for time-consuming segregation analysis, and extend characterization to the interphase nucleus, thus increasing the likelihood of accurate prediction of transgene activity. Furthermore, this approach is useful for studying nuclear organization and the dynamics of genes and chromatin.

Enhancing gene targeting efficiency in higher plants: rice is on the move

Meeting the challenge of routine gene targeting (GT) in higher plants is of crucial interest to researchers and plant breeders who are currently in need of a powerful tool to specifically modify a given locus in a genome. Higher plants have long been considered the last lineage resistant to targeting technology. However, a recent report described an efficient method of T-DNA-mediated targeted disruption of a non-selectable locus in rice [Terada et al., Nat Biotechnol 20: 1030-1034 (2002)]. Though this study was an obvious breakthrough, further improvement of GT frequencies may derive from a better understanding of the natural mechanisms that control homologous recombination (HR) processes. In this review, we will focus on what is known about HR and the factors which may hamper the development of routine GT by HR in higher plants. We will also present the current strategies envisaged to overcome these limitations, such as expression of recombination proteins and refinements in the design of the transformation vector.

Recent advances in rice biotechnology--towards genetically superior transgenic rice

Rice biotechnology has made rapid advances since the first transgenic rice plants were produced 15 years ago. Over the past decade, this progress has resulted in the development of high frequency, routine and reproducible genetic transformation protocols for rice. This technology has been applied to produce rice plants that withstand several abiotic stresses, as well as to gain tolerance against various pests and diseases. In addition, quality improving and increased nutritional value traits have also been introduced into rice. Most of these gains were not possible through conventional breeding technologies. Transgenic rice system has been used to understand the process of transformation itself, the integration pattern of transgene as well as to modulate gene expression. Field trials of transgenic rice, especially insect-resistant rice, have recently been performed and several other studies that are prerequisite for safe release of transgenic crops have been initiated. New molecular improvisations such as inducible expression of transgene and selectable marker-free technology will help in producing superior transgenic product. It is also a step towards alleviating public concerns relating to issues of transgenic technology and to gain regulatory approval. Knowledge gained from rice can also be applied to improve other cereals. The completion of the rice genome sequencing together with a rich collection of full-length cDNA resources has opened up a plethora of opportunities, paving the way to integrate data from the large-scale projects to solve specific biological problems.

Plant protoplasts: status and biotechnological perspectives

Plant protoplasts ("naked" cells) provide a unique single cell system to underpin several aspects of modern biotechnology. Major advances in genomics, proteomics, and metabolomics have stimulated renewed interest in these osmotically fragile wall-less cells. Reliable procedures are available to isolate and culture protoplasts from a range of plants, including both monocotyledonous and dicotyledonous crops. Several parameters, particularly the source tissue, culture medium, and environmental factors, influence the ability of protoplasts and protoplast-derived cells to express their totipotency and to develop into fertile plants. Importantly, novel approaches to maximise the efficiency of protoplast-to-plant systems include techniques already well established for animal and microbial cells, such as electrostimulation and exposure of protoplasts to surfactants and respiratory gas carriers, especially perfluorochemicals and hemoglobin. However, despite at least four decades of concerted effort and technology transfer between laboratories worldwide, many species still remain recalcitrant in culture. Nevertheless, isolated protoplasts are unique to a range of experimental procedures. In the context of plant genetic manipulation, somatic hybridisation by protoplast fusion enables nuclear and cytoplasmic genomes to be combined, fully or partially, at the interspecific and intergeneric levels to circumvent naturally occurring sexual incompatibility barriers. Uptake of isolated DNA into protoplasts provides the basis for transient and stable nuclear transformation, and also organelle transformation to generate transplastomic plants. Isolated protoplasts are also exploited in numerous miscellaneous studies involving membrane function, cell structure, synthesis of pharmaceutical products, and toxicological assessments. This review focuses upon the most recent developments in protoplast-based technologies.