CO adsorption on Fe-doped vacancy-defected CNTs – A DFT study

Hydrogen storage efficiency of Fe doped carbon nanotubes: molecular simulation study

Given that adsorption is widely regarded as a favorable technique for hydrogen storage, it is appropriate to pursue the development of suitable adsorbent materials for industrial storage. This study aimed to assess the potential of Fe-doped carbon nanotubes (FeCNT) as a remarkable material for hydrogen storage. The structures of pure and Fe-doped CNTs were optimized based on quantum mechanical calculations using density functional theory (DFT) with the Perdew-Burke-Ernzerhof (PBE) method. To gain a comprehensive understanding of the adsorption behavior, Monte Carlo simulation was employed to investigate the adsorption of hydrogen molecules on FeCNT. The study specifically examined the impact of temperature, pressure, and hydrogen mole percentage on the adsorption capacity of FeCNT. The findings indicated that the uptake of hydrogen increased as the pressure increased, and when the pressure exceeded 5 MPa, FeCNT reached a state of near saturation. At room temperature and pressures of 1 and 5 MPa, the hydrogen capacities of FeCNT were determined to be 1.53 and 6.92 wt%, respectively. The radial distribution function diagrams confirmed the formation of a one-layer adsorption phase at pressures below 5 MPa. A comparison of the temperature dependence of hydrogen adsorption between FeCNT and pure CNT confirmed the effectiveness of Fe doping in hydrogen storage up to room temperature. FeCNT exhibited a greater reduction in initial hydrogen capacity at temperatures above room temperature. To evaluate the safety of the system, the use of N2 as a dilution agent was investigated by examining the hydrogen uptake of FeCNT from pure and H2/N2 mixtures at 300 K. The results showed that the addition of N2 to the environment had no significant effect on FeCNT hydrogen storage at pressures below 4 MPa. Furthermore, the study of H2 selectivity from the H2/N2 mixture indicated that FeCNT demonstrated a preference for adsorbing H2 over a wide range of bulk mole fractions at pressures of 4 and 5 MPa, suggesting that these pressures could be considered optimal. Under these conditions, Fe doping can offer an efficient and selective adsorption surface for hydrogen storage.

Fe-doped carbon nanotubes: towards the molecular design of new catalysts for the oxygen reduction reaction

Using DFT computational methods, single-walled carbon nanotubes (CNT) are explored in different geometric configurations (armchair, chiral and zigzag) doped with Fe. Geometry, electronic structure and magnetic properties are investigated for all systems, in order to evaluate a potential application of these structures as electrocatalysts in efficient and low-cost fuel cells. In search for a better electrode material, we turn our attention on nature for help. Oxygen molecules are well-known to reveal a remarkable affinity to the heme group. Therefore, we model the adsorption/dissociative behavior of oxygen molecules on carbon nanotubes doped with Fe atoms. We analyze in detail the effect of the chiral nature of carbon nanotubes that governs their electric, magnetic and chemical behavior. Our results indicate that the dissociation phenomenon involving the armchair (5,5) Fe@CNT is more favored than other chiralities and other doped CNT systems, leading to the lowest activation barrier.

Adsorption characteristics of sulfonamide antibiotic molecules on carbon nanotube and the effects of environment

CONTEXT

In this paper, the adsorption characteristics of five sulfonamide antibiotic molecules on carbon nanotubes were investigated using density functional theory (DFT) calculations. The adsorption configurations of different adsorption sites were optimized, and the most stable adsorption configuration of each sulfonamide molecule was determined by adsorption energy comparison, and the relative adsorption stability of five sulfonamide molecules on carbon nanotubes was determined by comparing their adsorption energies, i.e., sulfamethazine > sulfadiazine > sulfamerazine > sulfamethoxazole > sulfanilamide. The electron densities of the adsorption configurations were then calculated to confirm that the adsorption of five sulfonamide drug molecules on carbon nanotubes should be physical adsorption. Moreover, the adsorption energy of five sulfonamide molecules on carbon nanotubes in the aqueous environment was larger than that in the vacuum even though the adsorption process remain to be physical adsorption. The adsorption characteristics of the five sulfonamide molecules in various acid-base environments were finally investigated. In contrast, the adsorption energies of the five drug molecules in acid-base environments were significantly reduced, indicating that carbon nanotubes may need to have a suitable pH range to achieve the optimal adsorption effect when they are used for the treatment of sulfonamide antibiotics.

METHODS

In this paper, we use density functional theory (DFT) with PBE functional to study the adsorption properties of five sulfonamides on carbon nanotubes. The structural optimization and the calculation of electronic structural properties are carried out by CP2K package (version 7.1), adopting the DZVP-MOLOPT-SR-GTH basis set and Goedeck-Teter-Hutter (GTH) pseudo potential. Grimme's D3 correction is used to during all the calculations to correctly capture the influence of the van der Waals interactions.

Role of Defect Engineering and Surface Functionalization in the Design of Carbon Nanotube-Based Nitrogen Oxide Sensors

Nitrogen oxides (NOx) are among the main atmospheric pollutants; therefore, it is important to monitor and detect their presence in the atmosphere. To this end, low-dimensional carbon structures have been widely used as NOx sensors for their outstanding properties. In particular, carbon nanotubes (CNTs) have been widely used as toxic-gas sensors owing to their high specific surface area and excellent mechanical properties. Although pristine CNTs have shown promising performance for NOx detection, several strategies have been developed such as surface functionalization and defect engineering to improve the NOx sensing of pristine CNT-based sensors. Through these strategies, the sensing properties of modified CNTs toward NOx gases have been substantially improved. Therefore, in this review, we have analyzed the defect engineering and surface functionalization strategies used in the last decade to modify the sensitivity and the selectivity of CNTs to NOx. First, the different types of surface functionalization and defect engineering were reviewed. Thereafter, we analyzed experimental, theoretical, and coupled experimental-theoretical studies on CNTs modified through surface functionalization and defect engineering to improve the sensitivity and selectivity to NOx. Finally, we presented the conclusions and the future directions of modified CNTs as NOx sensors.

A DFT-based analysis of adsorption properties of fluoride anion on intrinsic, B-doped, and Al-doped graphene

Fluorine emission from domestic wastewater is a major cause of severe environmental issues. In this paper, the density functional theory has been used to reveal the adsorption properties of F^- ions and HF molecules on intrinsic graphene, B-doped graphene, and Al-doped graphene. Throughout the analysis of band structure, geometric structure, adsorption energy, charge transfer, charge density, density of states, and frontier orbital, we can find that the adsorption of F^- ions and HF molecules on intrinsic graphene and HF molecules on B-doped graphene is weak, and it is only physical adsorption. When F^- ions and HF molecules are adsorbed on Al-doped graphene and F^- ions adsorbed on B-doped graphene, the adsorption energy, charge transfer, and charge density greatly increase, and the adsorption distance significantly decreases, and there exist obvious hybridizations by analyzing the charge density and density of states. We can also find that Al-doped graphene is more sensitive to F^- ions after comparing the variation of band gap. The work conducted in this research provides a theoretical guidance for the application of fluorine sensors based on graphene.

Interaction investigation of single and multiple carbon monoxide molecules with Fe-, Ru-, and Os-doped single-walled carbon nanotubes by DFT study: applications to gas adsorption and detection nanomaterials

Due to the large surface area and unique electronic property, single-wall carbon nanotube (SWCNT) is being used for adsorption and detection nanomaterials, which can be used to reduce the CO pollution effect on the environment. In the present work, the adsorptions of single and multiple CO molecules on pristine and transition metal (TM = Fe-, Ru-, and Os)-doped SWCNT were investigated in terms of geometric, energetic, and electronic properties using density functional theory calculation. Calculated results display that the adsorption of CO molecule on the SWCNTs is energetically favorable. The TM-doped SWCNT are more highly interactive to CO adsorption than that of pristine SWCNT. An Os-doped SWCNT displays the strongest interaction with single and multiple CO molecules comparing with the Fe- and Ru-doped SWCNT. The TM doping on SWCNT can induce the charge transfer between CO molecule and the SWCNT. The energy gap and density of state are clearly changed when CO molecule interacts with TM-doped SWCNT, resulting in dramatic changes of their electronic properties. Therefore, TM-doped SWCNT are possibly used as potential CO storages/absorbents or sensor material for CO detection in the environment. Graphical abstract.