Facile preparation of flower-like MnO2/reduced graphene oxide (RGO) nanocomposite and investigation of its microwave absorption performance

Facile synthesis of Fe3O4 nanoparticles/reduced graphene oxide sandwich composites for highly efficient microwave absorption

Component regulation and microstructure design are two effective strategies to adjust electromagnetic parameters and improve the microwave absorption performance of materials. In this study, a facile synthesis strategy consisting of ultrasonic dispersion, blast drying, and roasting is proposed to build a sandwich-like graphene-based absorbent, in which Fe₃O₄ nanoparticles with adjustable content are sandwiched uniformly between reduced graphene oxide nanosheets. The sandwich structure can form multiple interfaces, prevent the aggregation of nanoparticles, facilitate interface polarization, and endow the material with multiple electromagnetic loss mechanisms, which is very beneficial for impedance matching and microwave attenuation. Notably, the effective absorption bandwidth achieves 5.7 GHz, and the minimum reflection loss value is -49.9 dB. In addition, the synthesis process is simple and suitable for large-scale production and possible industrial applications. Thus, this facile route to fabricate sandwich-like graphene-based absorbents provides new ideas and approaches for designing new graphene-based nanocomposites.

Room-Temperature One-Step Synthesis of Silver/Reduced Graphene Oxide Nanocomposites as an Excellent Microwave Absorber

The present study is focused on room-temperature synthesis carried out by reduction of an aqueous silver nitrate (AgNO₃) and AgNO₃/graphene oxide (GO) dispersion using a low-cost commercial Fehling B solution in one step to form silver quantum dots (Ag QDs) and their Ag/reduced graphene oxide (Ag/RGO) nanocomposites and their characterization. The crystallinity, surface chemistry, structural, and morphological studies indicated the formation of crystalline small-sized quasispherical-functionalized Ag particles distributed uniformly on the surface of RGO. The conductivity measurements further showed an improvement in the conductivity of Ag/RGO nanocomposites as compared to neat Ag QDs. Our findings showed that Ag/RGO nanocomposites prepared by using 0.055 wt % of GO exhibited a total enhanced electromagnetic interference (EMI)-shielding efficiency (SE_T) of ∼39.2-42.3 dB (2-8 GHz) with a maximum value of ∼43.8 dB at 7. 5 GHz due to conduction loss, an interconnected conducting network, and a synergistic effect, and it followed an absorption mechanism. Furthermore, this superior absorption-dominated shielding conferred reflection loss (R_L) in the range of -79 to -82.5 dB with a R_L minima of -88 dB at 7.5 GHz, considering an effective absorption bandwidth of ∼6 GHz with 99.9% absorptivity. It is anticipated that Ag/RGO nanocomposites prepared in one step at room temperature could find potential EMI-shielding applications.

Electromagnetic Interference Shielding Effectiveness of Room Temperature Fabricated Manganese Dioxide/Carbon Dots Nanocomposites

The present work is focused on the fabrication of manganese dioxide/carbon dots (MnO₂/CDs) nanocomposites at room temperature in situ co-participation method in an aqueous medium and characterized. Our study showed that the concentration of CDs controls the morphology of MnO₂/CDs nanocomposite and also acted as a reducing agent to convert potassium permanganate (KMnO₄) to MnO₂. Subsequently, nanoflowers, quasi-spherical particles, broken, and interconnected chain type of morphology was observed by adding dispersion of 0.5, 1.0, 1.5, and 2.0 ml CDs in acetone to 1 mmol KMnO₄ aqueous solution in the corresponding MnO₂/CDs-0.5, MnO₂/CDs-1.0, MnO₂/CDs-1.5, and MnO₂/CDs-2.0 composites, respectively. A plausible mechanism on the transformation of morphology of MnO₂/CDs with CDs concentration is also provided. Further, the present work also focused for the first time on the application in the electromagnetic interference (EMI) shielding of MnO₂/CD nanocomposites due to the high dielectric and conductivity. Interestingly, MnO₂/CDs-2.0 (nanochains) exhibited the highest total EMI shielding efficiency (SE_T) of ~39.4 dB following reflection as dominant shielding mechanism due to the high aspect ratio, highest conductivity, high dielectric loss, and impendence mismatch.

Preparation of core-shell C@TiO2 composite microspheres with wrinkled morphology and its microwave absorption

In this work, we successfully synthesize the core-shell structure carbon@titanium dioxide (C@TiO₂) composite microspheres with wrinkled surface through a three-step method and build up the relationship between the TiO₂ layer thickness and the microwave absorption property. The absorbing mechanism of the novel microsphere is revealed. Interface polymerization is applied for preparation of wrinkled poly glycidyl methacrylate/divinylbenzene polymer microspheres (PGMA/PDVB); Then, TiO₂ layer is controllably coated on the surface of PGMA/PDVB microspheres by hydrolysis of tetrabutyl titanate (TBT); C@TiO₂ composite microspheres are obtained by vacuum carbonization with PGMA/PDVB@TiO₂ microspheres as the precursor. TiO₂ layer thickness on the surface of C@TiO₂ composite microspheres can be effectively adjusted by controlling the amount of TBT. When the amount of TBT is 0.75 mL, C@TiO₂ composite microspheres exhibit the outstanding electromagnetic loss performance. The maximum reflection loss value (RLmax) reaches -49.21 dB at the thickness of 2 mm, corresponding effective absorption bandwidth is 5.27 GHz. The maximum effective absorption bandwidth is 5.5 GHz at 2.2 mm. The results show that the introduction of TiO₂ can regulate electromagnetic parameters and enhance interface polarization ability. Meanwhile, the surface wrinkle structure offers more opportunities for multiple reflections of electromagnetic and introduces a large number of defective skeleton structure. The synergy of multiple advantages makes the absorbing performance of C@TiO₂ composite microspheres significantly improved. This work plays a guiding role for the composition and the structure optimization of existing microwave absorbers.

Advances of 3D graphene and its composites in the field of microwave absorption

The intensive progress of information technology increases the demand for urgent development of practical materials for microwave absorption (MA), meeting the general requirement "thin, wide, light and strong". In the past 6 years, graphene is of great interest for MA performance due to its unique properties such as high specific surface area, high electrical conductivity, strong dielectric loss, and low density. Taking in account that the structure of absorber plays a key role in MA performance, the attempts to produce an efficient microwave absorbing materials (MAMs) have led to 3D graphene - aerogels and foams - due to their extremely high porosity, large specific surface area, excellent mechanical properties with ability of compression and further maintaining the original shape, lightweight, reduced agglomeration of graphene sheets. All listed parameters enhance the impedance matching of MAMs, generate the synergistic loss effects, thereby improving the MA properties. The review describes the bases of MA theory and summarizes the recent achievements in the fabrication of pure 3D graphene networks and their composites with magnetic, ceramic nanoparticles and nanowires, polymers, MXenes, and multicomponent systems, directed to improve the impedance matching and generate loss mechanisms for the overall improvement of their performance as MAMs.