Tetrahydropyrimido-Triazepine derivatives as anti-corrosion additives for acid corrosion: Chemical, electrochemical, surface and theoretical studies

Effective corrosion inhibition of mild steel using novel 1,3,4-oxadiazole-pyridine hybrids: Synthesis, electrochemical, morphological, and computational insights

An easy synthesis of two 1,3,4-oxadiazole derivatives, namely, 2-phenyl-5-(pyridin-3-yl)-1,3,4-oxadiazole (POX) and 2-(4-methoxyphenyl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (4-PMOX), and their corrosion-inhibition efficacy against mild steel corrosion in 1 N HCl, is evaluated using weight loss from 303 to 323 K, Electrochemical Impedance Spectroscopy (EIS), Potentiodynamic Polarization (PDP), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), UV-Vis spectroscopy, along with theoretical evaluation. Both POX and 4-PMOX exhibit excellent inhibition efficiency, with values reaching 97.83% and 98% at 500 ppm, respectively. The PDP analysis reveals that both derivatives act as mixed-type inhibitors. The Langmuir adsorption isotherm provides insights into the adsorption phenomena, demonstrating that 4-PMOX exhibits superior adsorption behavior on the mild steel surface compared to POX. This finding is further supported by SEM, DFT, RDF, and MSD analyses. Quantum mechanical parameters, including EHOMO, ELUMO, dipole moment (μ), energy gap (ΔE), etc., are in good agreement with the effectiveness of inhibition performance revealing ΔE values of 3.10 and 2.75 for POX and 4-PMOX, respectively. The results obtained from this study hold significant implications for researchers aiming to design more efficient organic inhibitors to combat metal corrosion.

Investigating the Inhibitory Properties of Cupressus sempervirens Extract against Copper Corrosion in 0.5 M H2SO4: Combining Quantum (Density Functional Theory Calculation-Monte Carlo Simulation) and Electrochemical-Surface Studies

The study investigates the potential of Cupressus sempervirens (EO) as a sustainable and eco-friendly inhibitor of copper corrosion in a 0.5 M sulfuric acid medium. The electrochemical impedance spectroscopy analysis shows that the effectiveness of corrosion inhibition rises with increasing inhibitor concentrations, reaching 94% with the application of 2 g/L of EO, and potentiodynamic polarization (PDP) studies reveal that EO functions as a mixed-type corrosion inhibitor. In addition, the Langmuir adsorption isotherm is an effective descriptor of its adsorption. Scanning electron microscopy/energy-dispersive X-ray spectroscopy, atomic force microscopy surface examination, and contact angle measurement indicate that EO may form a barrier layer on the metal surface. Density functional theory calculations, Monte Carlo simulation models, and the radial distribution function were also used to provide a more detailed understanding of the corrosion protection mechanism. Overall, the findings suggest that Cupressus sempervirens (EO) has the potential to serve as an effective and sustainable corrosion inhibitor for copper in a sulfuric acid medium, contributing to the development of green corrosion inhibitors for environmentally friendly industrial processes.

Evaluation of inhibitive corrosion potential of symmetrical hydrazine derivatives containing nitrophenyl moiety in 1M HCl for C38 steel: experimental and theoretical studies

The exploitation of cost-effective, sustainable, green and efficient compounds is a renewed science and a demanding mission for today's chemists and technologists. In this view, the inhibitive corrosion properties of some hydrazine derivatives named (1E,2E)-bis(1-(2-nitrophenyl)ethylidene)hydrazine (SSBO), (1E,2E)-bis(1-(3-nitrophenyl)ethylidene)hydrazine (SSBM) and (1E,2E)-bis(1-(4-nitrophenyl)ethylidene)hydrazine (SSBP) on the C38 steel corrosion in 1M HCl media has been evaluated by different techniques like electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy. The EIS results showed that SSBM is the greatest inhibitor (η>93%) among the three tested compounds. The SSBM gives considerable inhibition efficiency against corrosion of steel compared to the previous studies. The PDP curves indicated that the studied inhibitors were a mixed-type inhibitor with a predominantly cathodic control. Quantum calculations of some descriptors derived from the density functional theory (DFT), the transition state theory (TST), the quantum theory of atoms in molecules (QTAIM) and molecular dynamics simulation have delivered helpful information regarding electron transfer and mechanism during adsorption of inhibitors on C38 steel surface.

Modification of Cu(111) Surface with Alkylphosphonic Acids in Aqueous and Ethanol Solution—An Experimental and Theoretical Study

Alkylphosphonic acids are well known for their ability to form self-assembled monolayers on hydroxide surfaces. A crucial step to understanding fundamentally how these surfaces are created is the elucidation of the interaction process that leads to such interface creation. In this study, we employed electrochemical impedance spectroscopy (EIS), Monte Carlo and molecular dynamics to understand this process. The interaction with the Cu(111) surface of three different alkylphosphonic acids (hexyl-, octyl- and decylphosphonic acids) is evaluated in an aqueous acidic and in an ethanol solution by Monte Carlo and molecular dynamics simulations, while EIS measurements are used to put in evidence the impact of the layer made in ethanol on copper protection. Nyquist diagrams of copper samples modified with an alkylphosphonic monolayer showed a higher polarization resistance that mitigates the copper corrosion in an aqueous acid medium. The phase–frequency Bode plots had higher and broader phase maxima for a modified copper surface with phosphonic moieties, which confirmed the ability of this organic layer to prevent copper corrosion.

Anticorrosion effect of a green sustainable inhibitor on mild steel in hydrochloric acid

Green inhibitors are an important way to decrease the corrosion rate of different industrial metals. The present work shows the corrosion behavior of the mild steel medium (MS) in hydrochloric acid 1 M by the aqueous extract of Artemisia Herba Alba (AHA), which is an green sustainable inhibitor to reduce its corrosive action by exploiting a variety of techniques and methods namely: Weight loss, electrochemical techniques [electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP], SEM-EDX, XPS and theoretical calculations for the majority molecule. Hydrodistillation is the extraction method that has been used to prepare the aqueous extracts. Otherwise, phytochemical screening characterization of different parts of the plant was applied to show the proportions of chemical compounds that exist in the plants. The highest inhibition efficiency obtained is 92% for 0.4 g/L of AHA aqueous extract in 1 M HCl at 303 K. PDP study confirmed that the AHA extract is of mixed-kind inhibitor. A CPE, Q determined by fit and graphical methods plotted by synthetic data, was utilized. To characterize the mild steel surface, scanning electron microscopy was also used; SEM/EDX allowed the investigation of the AHA effect on the surface of mild steel specimens. To comprehend the adsorption mechanism of AHA extract for MS in the 1 M HCl, XPS technique was accomplished. Theoretical approaches based on chemical quantum calculations and molecular dynamics simulation clearly explains the mode of adsorption of the majority molecule on the iron surface.