Enhanced photocatalytic degradation of tetracycline hydrochloride by Al-doped BiOCl microspheres under simulated sunlight irradiation

Photocatalytic Degradation of Tetracycline Hydrochloride Based on the Structure-Property Exploration of BiOCl

The correlation between structure and properties in the photodegradation reaction of bismuth oxychloride (BiOCl) was explored in this work. Three BiOCl samples with different sizes, morphological structures, and defects were prepared through a hydrothermal method with experimental manipulation. Their structural properties were comprehensively characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, electron spin resonance, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, and photoluminescence. Taking the photodegradation of tetracycline hydrochloride (TC-HCl) as the probe reaction, we found that high activity could be achieved by decreasing their crystal size and thickness, introducing proper defects in the structure, and assembling the nanosheets to get microball structure. Combined with radical-scavenge experiments and electron spin resonance (ESR) spin-trap spectra, we conclude that ̇O2- was the dominant reactive oxygen species for the degradation reaction. The degradation detailed pathway of TC-HCl was further analyzed using liquid chromatography-mass spectrometry. This work explores the structure-property correlation of BiOCl and provides strategies for the rational design of active photocatalysts for water remediation.

Enhancing the photodegradation of tetracycline in aquaculture wastewater via iron(III)-alginate: Degradation pathway transformation and toxicity reduction

Tetracycline's (TC) incomplete self-photolysis by light irradiation generally produces toxic intermediate products, which posing serious harm to the aqueous environment. In order to diminish the environmental risks of TC self-photolysis, an iron(III)-alginate (Fe-SA) hydrogel assisted photocatalytic method was developed and the underlying mechanisms was also analyzed in this work. Under simulated sunlight, the photo-degradation efficiency of TC was 61.1% at pH 7.0 within 2 h. Importantly, four of the seven intermediate products that identified during the self-photolysis of TC were found toxic based on QSAR analysis. In contrast, the removal efficiency of TC could be improved to 87.4% by adding Fe-SA under the same conditions. Moreover, only two relatively weakly toxic intermediate products were detected after exposing to the Fe-SA photocatalytic system, indicating a significant reduction of the potential ecological risks caused by TC self-photolysis. Furthermore, the determination of reactive oxidation species (ROS) demonstrated that the addition of Fe-SA primarily facilitated the degradation of TC and the related toxic intermediate products through assisting the free radical (∙OH and ∙O2-) photocatalytic degradation pathway. Additionally, the photocatalytic application under actual sunlight conditions and the reusability experiments of Fe-SA further confirmed its effectiveness and low cost in removing TC. This study revealed the photodegradation mechanisms of TC from the perspective of the self-photolysis process, and also offering new insights into the removal of TC pollution in the environment.

Bismuth-based nanostructured photocatalysts for the remediation of antibiotics and organic dyes

A serious threat to human health and the environment worldwide, in addition to the global energy crisis, is the increasing water pollution caused by micropollutants such as antibiotics and persistent organic dyes. Nanostructured semiconductors in advanced oxidation processes using photocatalysis have recently attracted a lot of interest as a promising green and sustainable wastewater treatment method for a cleaner environment. Due to their narrow bandgaps, distinctive layered structures, plasmonic, piezoelectric and ferroelectric properties, and desirable physicochemical features, bismuth-based nanostructure photocatalysts have emerged as one of the most prominent study topics compared to the commonly used semiconductors (TiO₂ and ZnO). In this review, the most recent developments in the use of photocatalysts based on bismuth (e.g., BiFeO₃, Bi₂MoO₆, BiVO₄, Bi₂WO₆, Bi₂S₃) to remove dyes and antibiotics from wastewater are thoroughly covered. The creation of Z-schemes, Schottky junctions, and heterojunctions, as well as morphological modifications, doping, and other processes are highlighted regarding the fabrication of bismuth-based photocatalysts with improved photocatalytic capabilities. A discussion of general photocatalytic mechanisms is included, along with potential antibiotic and dye degradation pathways in wastewater. Finally, areas that require additional study and attention regarding the usage of photocatalysts based on bismuth for removing pharmaceuticals and textile dyes from wastewater, particularly for real-world applications, are addressed.

Di-functional Cu2+-doped BiOCl photocatalyst for degradation of organic pollutant and inhibition of cyanobacterial growth

Photocatalytic oxidation of contaminants in water has recently gained extensive attentions. In this study, Cu²⁺-doped BiOCl microsphere photocatalysts were prepared using solvothermal method. The effects of Cu²⁺ doping ratio on the morphological structures and photoelectric and photocatalytic properties of BiOCl were studied in detail. Results showed that Cu²⁺ doping affected the particle size of BiOCl microspheres. The introduction of Cu²⁺ ions gradually increased the light absorption range and decreased the electron recombination rate of photocatalysts as shown by ultraviolet-visible diffuse reflection and photoluminescence spectra. The best doping ratio was 0.25 Cu²⁺-BiOCl, showing the highest photocatalytic activity for rhodamine B (14.25 time higher than BiOCl) and a good inhibition of algal growth. The main reactants in the photocatalytic system were·OH and h⁺ (electron holes). Density functional theory (DFT) calculations further demonstrated that the doping of Cu²⁺ ions made the photogenerated carriers in BiOCl easier to generate and ensured the charge was transferred more rapidly. In conclusion, a novel high-efficiency multifunctional photocatalyst is proposed for the efficient organic pollutants removal and algae growth inhibition from water.

Recent advances in bismuth oxyhalide photocatalysts for degradation of organic pollutants in wastewater

Photocatalysis has been considered as an environmental-friendly strategy for degradation of organic pollutants to the nontoxic products of H₂O and CO₂. Compared to metal oxide semiconductors, BiOX (X = Cl, Br and I) photocatalysts exhibit some advantages, such as, unique layered structure, good chemical stability and superior photocatalytic activity. This review provides an overview on the controllable synthesis of BiOX-based photocatalysts and their application in photodegradation of organic pollutants. Firstly, the controllable synthesis of BiOX is introduced, including hydrothermal, solvothermal, hydrolysis, precipitation, two-phase methods, ultrasonic/microwave-assisted methods, and physical methods. Then, the doping and surface modification of BiOX are summarized, including non-metal doping, metal doping, dual doping, and the modification by introducing surface terminations or carriers. In addition, the heterojunctions of BiOX/BiOY and BiOX/Bi_mO_nX_z are introduced. At last, the promising research trends of BiOX-based photocatalysts are put forward. The main purpose is providing practical guidelines for developing high-performance BiOX photocatalysts.

Advances in BiOX photocatalysts for degradation of organic pollutants are introduced, including the controllable synthesis, heteroatom doping & surface modification, BiOX/BiOY and BiOX/Bi_mO_nX_z heterojunctions.

Bismuth oxychloride-based materials for the removal of organic pollutants in wastewater

Various kind of organics are toxic and detrimental, resulting in eutrophication, black, odorous water and so on. Photocatalysis has been deemed to be a promising technology which can decompose different kinds of organic pollutants under visible light irradiation, finally achieving non-poisonous, harmless CO2, water and other inorganic materials. Bismuth oxychloride (BiOCl) is considered as a promising photocatalyst for the efficient degradation of organic pollutants due to its high chemical stability, unique layered structure, resistance to corrosion and favorable photocatalytic property. However, BiOCl can only absorb UV irradiation because of its wide band gap of 3.2 eV-3.5 eV that limits its photocatalytic performance. Herein, a lot of methods have been reviewed to improve its photocatalytic activity. We introduced the unique and special layered structure of BiOCl, the typical and common synthesis methods that can control the morphology, and the most important part is varies of modification routes of BiOCl and the application of BiOCl-based materials for photocatalytic degradation of organic pollutants. Besides, we summarized the crucial issues and perspectives about the application of BiOCl in pollution management.