Incidence of Complications During Initial Experience with Revision of the Agility and Agility LP Total Ankle Replacement Systems: A Single Surgeon's Learning Curve Experience

The INVISION Talar Component in Revision Total Ankle Arthroplasty: Analysis of Early Outcomes

INTRODUCTION

Launched in 2018 for revision total ankle arthroplasty (rTAA), the INVISION talar component addresses subsidence when poor talar bone stock is present. Due to the recency of the market-availability of the INVISION, studies evaluating its efficacy are lacking. This study presents the first analysis of early-term outcomes of patients undergoing rTAA with the INVISION talar component.

METHODS

This was a single-center, retrospective review of 28 patients undergoing rTAA with the INVISION talar component and INBONE II tibial component performed between 2018 and 2022. Data on preoperative characteristics, postoperative complications, secondary procedures, and survivorship were collected. The primary outcome measures were rates of major complications, re-operation, and implant failure. Secondary outcomes included post-operative changes in varus and valgus alignment of the tibia and talus.

RESULTS

The most common secondary procedures performed with rTAA were medial malleolus fixation (n = 22, 78.6%) and gastrocnemius recession (n = 14, 50%). Overall, 10.7% (n = 3) of patients underwent reoperation and 14.3% (n = 4) suffered major complications. Incidence of implant failure was 10.7% (n = 3). All reoperations were caused by infection. Mean varus alignment of the tibia and talus improved from 4.07 degrees and 4.83 degrees to 1.67 degrees and 1.23 degrees, respectively. Mean valgus alignment of the tibia and talus improved from 3.67 degrees and 4.22 degrees to 2.00 degrees and 2.32 degrees, respectively.

CONCLUSIONS

In a series of 28 patients undergoing rTAA with the INVISION talar component, we discovered comparatively low rates of reoperation, major complication, and implant failure (10.7%, 14.3%, and 10.7%). The INVISION system appears to have a reasonable safety profile, but further studies evaluating long-term outcomes are required to assess the efficacy of the INVISION system.

Outcomes of Revision Total Ankle Replacement

The objective of this study is to provide an up-to-date review of the outcomes of revision total ankle arthroplasty (TAA). Relevant studies published over the last decade were reviewed. Twelve studies were included. At a median follow-up of 4 years, the median survival and reoperation rates were 86% and 16%, respectively. Significant postoperative improvements in patient-reported outcome measures were recorded in 6 studies. Significant improvement in alignment was documented in 1 study only. Revision TAA is a safe procedure that can produce good outcomes. Nevertheless, data relating to long-term outcome are still limited in quantity and duration.

Learning curve associated with minimally invasive surgery for hallux valgus: A systematic review

BACKGROUND

The purpose of this systematic review is to examine the learning curve associated with minimally invasive surgery (MIS) for the treatment of hallux valgus (HV).

METHODS

A systematic review was performed using PubMed, ScienceDirect, Web of Science, CINAHL and MEDLINE databases from database inception to February 16th, 2023. Inclusion criteria was articles with level of evidence I-III, any outcomes associated with learning curve, minimally invasive surgery, and diagnosis of hallux valgus' in adult patients.

RESULTS

Six articles out of 165 articles meet inclusion criteria. For all six articles, 368 total patients (422 total feet) were included in the study with an average age of 55.69 years. Three studies reported the number of surgeries needed to reach the plateau phase of the learning curve of MIS for HV, with a frequency weighted mean of 35.5 surgeries (range 27 - 40). In the selected articles, significant results were found for increased operating room (OR) time and fluoroscopy shots in the learning phase. There was no significant increase in complications in the learning phase. There was no significant decrease in patient outcomes, or the quality of correction performed during the learning phase.

CONCLUSION

An average of 35.5 surgeries (range 27 - 40) are needed to reach the plateau phase for MIS for HV. The learning phase of the learning curve of MIS for HV has a significant increase in OR time and fluoroscopy usage. However, the learning phase of the learning curve of MIS for HV is not associated with decreased outcomes or higher complication rates based on the small sample size in this study.

LEVEL OF EVIDENCE

Level III, Systematic Review.

Is debridement really the best we can do for periprosthetic joint infections following total ankle replacements? A systematic review and meta-analysis

BACKGROUND

Ankle periprosthetic joint infections are rising in number, but an evidence-based gold standard treatment has not been defined yet.

METHODS

We made a systematic review about the operative treatment of infections following total ankle arthroplasty. Proportional meta-analysis was used to summarize effects of the surgical techniques included. Primary outcome of this study was infection eradication, followed by complications, re-interventions, amputation rates and functions.

RESULTS

We included six studies(113 patients) reporting 6 types of surgical interventions, mostly irrigation and debridement (35.4%) and two-stage revisions (24.8%). No differences among all analyzed techniques were found in the infection eradication outcome as well as in the secondary outcomes. Patients receiving a permanent spacer are most likely to end up with amputation.

CONCLUSIONS

Literature dealing with infections after total ankle replacement is currently composed by few low-quality articles. The overlapping of confidence intervals related to all analyzed interventions showed no superiority of either technique.

LEVEL OF EVIDENCE

III.

The outcomes of revision surgery for a failed ankle arthroplasty

Aims

Revision rates for ankle arthroplasties are higher than hip or knee arthroplasties. When a total ankle arthroplasty (TAA) fails, it can either undergo revision to another ankle replacement, revision of the TAA to ankle arthrodesis (fusion), or amputation. Currently there is a paucity of literature on the outcomes of these revisions. The aim of this meta-analysis is to assess the outcomes of revision TAA with respect to surgery type, functional outcomes, and reoperations.

Methods

A systematic review was conducted using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. PubMed, Medline, Embase, Cinahl, and Cochrane reviews were searched for relevant papers. Papers analyzing surgical treatment for failed ankle arthroplasties were included. All papers were reviewed by two authors. Overall, 34 papers met the inclusion criteria. A meta-analysis of proportions was performed.

Results

Six papers analyzed all-cause reoperations of revision ankle arthroplasties, and 14 papers analyzed failures of conversion of a TAA to fusion. It was found that 26.9% (95% confidence interval (CI) 15.4% to 40.1%) of revision ankle arthroplasties required further surgical intervention and 13.0% (95% CI 4.9% to 23.4%) of conversion to fusions; 14.4% (95% CI 8.4% to 21.4%) of revision ankle arthroplasties failed and 8% (95% CI 4% to 13%) of conversion to fusions failed.

Conclusion

Revision of primary TAA can be an effective procedure with improved functional outcomes, but has considerable risks of failure and reoperation, especially in those with periprosthetic joint infection. In those who undergo conversion of TAA to fusion, there are high rates of nonunion. Further comparative studies are required to compare both operative techniques. Cite this article: Bone Jt Open 2022;3(7):596–606.

Learning curve assessment for total ankle replacement using the transfibular approach

BACKGROUND

Total ankle arthroplasty is an increasingly effective option for the treatment of end-stage arthritis. One recent innovation utilizes a transfibular, lateral approach. Like any new system, there is likely a learning curve associated with its use. We analyzed a series of patients who received a total ankle arthroplasty via a transfibular approach to state if it is possible to identify and to evaluate effects of a learning curve in the use of this novel total ankle replacement system.

METHODS

76 consecutive patients meeting inclusion and exclusion criteria were retrospectively analyzed. All patients had a minimum of 24 months of follow-up. Intraoperative parameters, preoperative and postoperative subjective outcome scores, radiographic parameters, and complications were recorded and evaluated.

RESULTS

There were significant learning curve effects on various surgical and postoperative parameters. Surgical time decreased with the curve stabilizing after the 16th patient. With regard to patient outcomes, a learning curve was identified for the VAS, AOFAS, and SF-12 MCS scores. The number of patients required to stabilize these curves were 21, 13, and 16, respectively. Alignment as measured by alpha and gamma angles also improved with experience, with the curves stabilizing at 18 and 15 patients, respectively. There was a larger number cases required for complication rates, with the curve stabilizing after the 39th patient. No significant learning curve was found for ankle ROM, SF-12 PCS, beta angle, tibio-talar ratio (TTR), or tibio-talar surface angle (TTS).

CONCLUSIONS

This study demonstrates a significant learning curve with respect to operative time, patient outcomes, and radiographic parameters. Extrapolating this information, we urge surgeons to adequately familiarize themselves with any new implant through a training program in a high-volume center.

LEVEL OF EVIDENCE

IV, case series.

Sagittal Ankle and Midfoot Range of Motion Before and After Revision Total Ankle Replacement: A Retrospective Comparative Analysis

The most common reason for a revision total ankle replacement procedure is a painful, stiff ankle even after the initial surgery. Limited and conflicting data are available regarding the change in sagittal foot and ankle range of motion after revision total ankle replacement surgery. We sought to determine whether revision total ankle replacements would reduce compensatory midfoot range of motion. In determining this, a novel radiographic measurement system with stable osseous landmarks is used. A retrospective medical record review of patients who had undergone revision total ankle replacement from January 2009 to June 2016 was performed. Thirty-three patients (33 ankles) underwent revision total ankle replacement surgery and met the inclusion criteria with a mean follow-up period of 28.39 ± 14.68 (range 2 to 59) months. Investigation of preoperative and postoperative weightbearing lateral radiographic images was performed to determine the global foot and ankle, isolated ankle, and isolated midfoot sagittal ranges of motion. Statistical analysis revealed a significant increase in ankle range of motion (p = .046) and a significant decrease in midfoot range of motion (p < .001) from preoperatively to postoperatively. The change in global foot and ankle range of motion was not significant (p = .53). For this patient population, the increased ankle range of motion effectively resulted in less compensatory midfoot range of motion.

Effect of Obesity on Total Ankle Arthroplasty: A Systematic Review of Postoperative Complications Requiring Surgical Revision

Total ankle arthroplasty has become an increasingly used alternative to ankle arthrodesis for the treatment of end-stage ankle arthritis. However, despite progressive technological advances and the advent of multiple commercial implant systems, some concern remains for the relatively high complication and failure rates. The objective of the present investigation was to perform a systematic review of the incidence of complications in obese patients undergoing total ankle arthroplasty. We performed a review of electronic databases with the inclusion criteria of retrospective case series, retrospective clinical cohort analyses, and prospective clinical trials with ≥15 total participants, a mean follow-up period of ≥12 months, ≥1 defined cohort with a body mass index of ≥30 kg/m², and a reported incidence rate of complications requiring revisional surgery at the final follow-up point. Four studies met our inclusion criteria, with a total of 400 implants analyzed. Of these, ≥71 (17.8%) developed a complication requiring a revisional surgical procedure. The most commonly reported surgeries were revision of the metallic components and ankle gutter debridement. It is our hope that our investigation will allow foot and ankle surgeons to more effectively communicate the perioperative risk to their patients during the education and consent process.

Finite Element Study of Implant Subsidence and Medial Tilt in Agility Ankle Replacement

Background

Clinical studies indicate that in total ankle arthroplasty, postoperative implant subsidence and medial tilt become two significant concerns of the ankle replacement system, and which are associated with the contact between the bones and the talar component. Up to now, little attention has focused on the contact between the bones and the talar component.

Material/Methods

In order to address implant subsidence and medial tilt, one three-dimensional finite element model of contact between the bone and the talar components was built with the material properties of the cancellous bone interpolated from the experimental data, which represents variation of material properties through the cancellous bones. The finite element model was used to study the following: variation of the Young’s modulus of the bones, stiffness of the talar component, loading direction, and loading magnitude with the implant subsidence.

Results

The computational results reveal that a variety of Young’s modulus of the cancellous bones causes the medial tilting of the talar component and that big plastic strains are associated with tilting. The implant subsidence increases from 0.169 mm to 0.269 mm when the loading changes from 272 kg to 408 kg. However, to the contrary, the implant subsidence decreases from 0.2676 mm to 0.1783 mm when Young’s modulus of the bones increases 50%. However, the implant subsidence shows little change with a different Young’s modulus of the talar component from 88 GPa to 132 GPa.

Conclusions

Our study indicates that a variety of different Young’s modulus of the cancellous bones cause the medial tilting of the talar component. To solve subsidence and tilting, both the contact area and the variation of material properties should be taken into account.

The Salto Talaris XT Revision Ankle Prosthesis

The Salto Talaris XT Revision Ankle Prosthesis is an anatomically designed fixed-bearing prosthesis available in the United States based on the design of previous Salto systems. The Salto Talaris XT Revision Ankle Prosthesis design optimizes surface area, cortical contact, and ultrahigh-molecular-weight polyethylene conformity. Two tibial component designs, both with the same base plate dimensions, are available, the standard conical fixation plug affixed to a short keel and a long-stemmed version. The author presents an overview of the Salto Talaris XT Revision Ankle Prosthesis surgical technique and pearls for successful application.