Identifying pulmonary nodules or masses on chest radiography using deep learning: external validation and strategies to improve clinical practice

Computer-Generated Radiographic Measurements of Distal Radius Fractures: Does It Help With Decision Making?

PURPOSE

Operative management of distal radius fractures (DRFs) has become increasingly common. Age, activity levels, and comorbid conditions are major factors influencing the treatment decision, although operative indications are still controversial. Radiographic parameters (RPs), such as radial inclination, dorsal tilt, and articular step-off, can provide objective support for effective decision making. However, manual measurement of RPs may be imprecise and subject to inconsistency. To address this problem, we developed custom software of an algorithm to automatically detect and compute 6 common RPs associated with DRF in anteroposterior and lateral radiographs. The aim in this study was to assess the effect of this software on radiographic interobserver variability among orthopedic surgeons. Our hypothesis was that precise and consistent measurement of RPs will improve radiographic interpretation variability among surgeons and, consequently, may aid in clinical decision making.

METHODS

Thirty-five radiograph series of DRFs were presented to 9 fellowship-trained hand and orthopedic trauma surgeons. Each case was presented with basic clinical information, together with plain anteroposterior and lateral radiographs. One of the 2 possible treatment options was selected: casting or open reduction with a locking plate. The survey was repeated 3 weeks later, this time with computer-generated RP measurements. Data were analyzed for interobserver and intraobserver variability for both surveys, and the interclass coefficient, kappa value, was calculated.

RESULTS

The interobserver reliability (interclass coefficient value) improved from poor to moderate, 0.35 to 0.50, with the provided RP. The average intraobserver interclass coefficient was 0.68. When participants were assessed separately according to their subspecialties (trauma and hand), improved interobserver variability was found as well.

CONCLUSIONS

Providing computed RPs to orthopedic surgeons may improve the consistency of the radiographic judgment and influence their clinical decision for the treatment of DRFs.

CLINICAL RELEVANCE

Orthopedic surgeons' consistency in the radiographic judgment of DRFs slightly improved by providing automatically calculated radiographic measurements to them.

Better performance of deep learning pulmonary nodule detection using chest radiography with pixel level labels in reference to computed tomography: data quality matters

Labeling errors can significantly impact the performance of deep learning models used for screening chest radiographs. The deep learning model for detecting pulmonary nodules is particularly vulnerable to such errors, mainly because normal chest radiographs and those with nodules obscured by ribs appear similar. Thus, high-quality datasets referred to chest computed tomography (CT) are required to prevent the misclassification of nodular chest radiographs as normal. From this perspective, a deep learning strategy employing chest radiography data with pixel-level annotations referencing chest CT scans may improve nodule detection and localization compared to image-level labels. We trained models using a National Institute of Health chest radiograph-based labeling dataset and an AI-HUB CT-based labeling dataset, employing DenseNet architecture with squeeze-and-excitation blocks. We developed four models to assess whether CT versus chest radiography and pixel-level versus image-level labeling would improve the deep learning model's performance to detect nodules. The models' performance was evaluated using two external validation datasets. The AI-HUB dataset with image-level labeling outperformed the NIH dataset (AUC 0.88 vs 0.71 and 0.78 vs. 0.73 in two external datasets, respectively; both p < 0.001). However, the AI-HUB data annotated at the pixel level produced the best model (AUC 0.91 and 0.86 in external datasets), and in terms of nodule localization, it significantly outperformed models trained with image-level annotation data, with a Dice coefficient ranging from 0.36 to 0.58. Our findings underscore the importance of accurately labeled data in developing reliable deep learning algorithms for nodule detection in chest radiography.

[The contribution of artificial intelligence (AI) subsequent to the processing of thoracic imaging]

The contribution of artificial intelligence (AI) to medical imaging is currently the object of widespread experimentation. The development of deep learning (DL) methods, particularly convolution neural networks (CNNs), has led to performance gains often superior to those achieved by conventional methods such as machine learning. Radiomics is an approach aimed at extracting quantitative data not accessible to the human eye from images expressing a disease. The data subsequently feed machine learning models and produce diagnostic or prognostic probabilities. As for the multiple applications of AI methods in thoracic imaging, they are undergoing evaluation. Chest radiography is a practically ideal field for the development of DL algorithms able to automatically interpret X-rays. Current algorithms can detect up to 14 different abnormalities present either in isolation or in combination. Chest CT is another area offering numerous AI applications. Various algorithms have been specifically formed and validated for the detection and characterization of pulmonary nodules and pulmonary embolism, as well as segmentation and quantitative analysis of the extent of diffuse lung diseases (emphysema, infectious pneumonias, interstitial lung disease). In addition, the analysis of medical images can be associated with clinical, biological, and functional data (multi-omics analysis), the objective being to construct predictive approaches regarding disease prognosis and response to treatment.

A study of machine learning models for rapid intraoperative diagnosis of thyroid nodules for clinical practice in China

BACKGROUND

In China, rapid intraoperative diagnosis of frozen sections of thyroid nodules is used to guide surgery. However, the lack of subspecialty pathologists and delayed diagnoses are challenges in clinical treatment. This study aimed to develop novel diagnostic approaches to increase diagnostic effectiveness.

METHODS

Artificial intelligence and machine learning techniques were used to automatically diagnose histopathological slides. AI-based models were trained with annotations and selected as efficientnetV2-b0 from multi-set experiments.

RESULTS

On 191 test slides, the proposed method predicted benign and malignant categories with a sensitivity of 72.65%, specificity of 100.0%, and AUC of 86.32%. For the subtype diagnosis, the best AUC was 99.46% for medullary thyroid cancer with an average of 237.6 s per slide.

CONCLUSIONS

Within our testing dataset, the proposed method accurately diagnosed the thyroid nodules during surgery.

A real-world evaluation of the diagnostic accuracy of radiologists using positive predictive values verified from deep learning and natural language processing chest algorithms deployed retrospectively

Objectives

This diagnostic study assessed the accuracy of radiologists retrospectively, using the deep learning and natural language processing chest algorithms implemented in Clinical Review version 3.2 for: pneumothorax, rib fractures in digital chest X-ray radiographs (CXR); aortic aneurysm, pulmonary nodules, emphysema, and pulmonary embolism in CT images.

Methods

The study design was double-blind (artificial intelligence [AI] algorithms and humans), retrospective, non-interventional, and at a single NHS Trust. Adult patients (≥18 years old) scheduled for CXR and CT were invited to enroll as participants through an opt-out process. Reports and images were de-identified, processed retrospectively, and AI-flagged discrepant findings were assigned to two lead radiologists, each blinded to patient identifiers and original radiologist. The radiologist's findings for each clinical condition were tallied as a verified discrepancy (true positive) or not (false positive).

Results

The missed findings were: 0.02% rib fractures, 0.51% aortic aneurysm, 0.32% pulmonary nodules, 0.92% emphysema, and 0.28% pulmonary embolism. The positive predictive values (PPVs) were: pneumothorax (0%), rib fractures (5.6%), aortic dilatation (43.2%), pulmonary emphysema (46.0%), pulmonary embolus (11.5%), and pulmonary nodules (9.2%). The PPV for pneumothorax was nil owing to lack of available studies that were analysed for outpatient activity.

Conclusions

The number of missed findings was far less than generally predicted. The chest algorithms deployed retrospectively were a useful quality tool and AI augmented the radiologists' workflow.

Advances in knowledge

The diagnostic accuracy of our radiologists generated missed findings of 0.02% for rib fractures CXR, 0.51% for aortic dilatation, 0.32% for pulmonary nodule, 0.92% for pulmonary emphysema, and 0.28% for pulmonary embolism for CT studies, all retrospectively evaluated with AI used as a quality tool to flag potential missed findings. It is important to account for prevalence of these chest conditions in clinical context and use appropriate clinical thresholds for decision-making, not relying solely on AI.

A Systematic Literature Review of 3D Deep Learning Techniques in Computed Tomography Reconstruction

Computed tomography (CT) is used in a wide range of medical imaging diagnoses. However, the reconstruction of CT images from raw projection data is inherently complex and is subject to artifacts and noise, which compromises image quality and accuracy. In order to address these challenges, deep learning developments have the potential to improve the reconstruction of computed tomography images. In this regard, our research aim is to determine the techniques that are used for 3D deep learning in CT reconstruction and to identify the training and validation datasets that are accessible. This research was performed on five databases. After a careful assessment of each record based on the objective and scope of the study, we selected 60 research articles for this review. This systematic literature review revealed that convolutional neural networks (CNNs), 3D convolutional neural networks (3D CNNs), and deep learning reconstruction (DLR) were the most suitable deep learning algorithms for CT reconstruction. Additionally, two major datasets appropriate for training and developing deep learning systems were identified: 2016 NIH-AAPM-Mayo and MSCT. These datasets are important resources for the creation and assessment of CT reconstruction models. According to the results, 3D deep learning may increase the effectiveness of CT image reconstruction, boost image quality, and lower radiation exposure. By using these deep learning approaches, CT image reconstruction may be made more precise and effective, improving patient outcomes, diagnostic accuracy, and healthcare system productivity.

Development of a novel artificial intelligence algorithm to detect pulmonary nodules on chest radiography

BACKGROUND

In this study, we aimed to develop a novel artificial intelligence (AI) algorithm to support pulmonary nodule detection, which will enable physicians to efficiently interpret chest radiographs for lung cancer diagnosis.

METHODS

We analyzed chest X-ray images obtained from a health examination center in Fukushima and the National Institutes of Health (NIH) Chest X-ray 14 dataset. We categorized these data into two types: type A included both Fukushima and NIH datasets, and type B included only the Fukushima dataset. We also demonstrated pulmonary nodules in the form of a heatmap display on each chest radiograph and calculated the positive probability score as an index value.

RESULTS

Our novel AI algorithms had a receiver operating characteristic (ROC) area under the curve (AUC) of 0.74, a sensitivity of 0.75, and a specificity of 0.60 for the type A dataset. For the type B dataset, the respective values were 0.79, 0.72, and 0.74. The algorithms in both the type A and B datasets were superior to the accuracy of radiologists and similar to previous studies.

CONCLUSIONS

The proprietary AI algorithms had a similar accuracy for interpreting chest radiographs when compared with previous studies and radiologists. Especially, we could train a high quality AI algorithm, even with our small type B data set. However, further studies are needed to improve and further validate the accuracy of our AI algorithm.

Clinical outcomes and actual consequence of lung nodules incidentally detected on chest radiographs by artificial intelligence

This study evaluated how often clinically significant lung nodules were detected unexpectedly on chest radiographs (CXR) by artificial intelligence (AI)-based detection software, and whether co-existing findings can aid in differential diagnosis of lung nodules. Patients (> 18 years old) with AI-detected lung nodules at their first visit from March 2021 to February 2022, except for those in the pulmonology or thoracic surgery departments, were retrospectively included. Three radiologists categorized nodules into malignancy, active inflammation, post-inflammatory sequelae, or "other" groups. Characteristics of the nodule and abnormality scores of co-existing lung lesions were compared. Approximately 1% of patients (152/14,563) had unexpected lung nodules. Among 73 patients with follow-up exams, 69.9% had true positive nodules. Increased abnormality scores for nodules were significantly associated with malignancy (odds ratio [OR] 1.076, P = 0.001). Increased abnormality scores for consolidation (OR 1.033, P = 0.040) and pleural effusion (OR 1.025, P = 0.041) were significantly correlated with active inflammation-type nodules. Abnormality scores for fibrosis (OR 1.036, P = 0.013) and nodules (OR 0.940, P = 0.001) were significantly associated with post-inflammatory sequelae categorization. AI-based lesion-detection software of CXRs in daily practice can help identify clinically significant incidental lung nodules, and referring accompanying lung lesions may help classify the nodule.

Generative Adversarial Network (Generative Artificial Intelligence) in Pediatric Radiology: A Systematic Review

Generative artificial intelligence, especially with regard to the generative adversarial network (GAN), is an important research area in radiology as evidenced by a number of literature reviews on the role of GAN in radiology published in the last few years. However, no review article about GAN in pediatric radiology has been published yet. The purpose of this paper is to systematically review applications of GAN in pediatric radiology, their performances, and methods for their performance evaluation. Electronic databases were used for a literature search on 6 April 2023. Thirty-seven papers met the selection criteria and were included. This review reveals that the GAN can be applied to magnetic resonance imaging, X-ray, computed tomography, ultrasound and positron emission tomography for image translation, segmentation, reconstruction, quality assessment, synthesis and data augmentation, and disease diagnosis. About 80% of the included studies compared their GAN model performances with those of other approaches and indicated that their GAN models outperformed the others by 0.1-158.6%. However, these study findings should be used with caution because of a number of methodological weaknesses. For future GAN studies, more robust methods will be essential for addressing these issues. Otherwise, this would affect the clinical adoption of the GAN-based applications in pediatric radiology and the potential advantages of GAN could not be realized widely.

ADU-Net: An Attention Dense U-Net based deep supervised DNN for automated lesion segmentation of COVID-19 from chest CT images

An automatic method for qualitative and quantitative evaluation of chest Computed Tomography (CT) images is essential for diagnosing COVID-19 patients. We aim to develop an automated COVID-19 prediction framework using deep learning. We put forth a novel Deep Neural Network (DNN) composed of an attention-based dense U-Net with deep supervision for COVID-19 lung lesion segmentation from chest CT images. We incorporate dense U-Net where convolution kernel size 5×5 is used instead of 3×3. The dense and transition blocks are introduced to implement a densely connected network on each encoder level. Also, the attention mechanism is applied between the encoder, skip connection, and decoder. These are used to keep both the high and low-level features efficiently. The deep supervision mechanism creates secondary segmentation maps from the features. Deep supervision combines secondary supervision maps from various resolution levels and produces a better final segmentation map. The trained artificial DNN model takes the test data at its input and generates a prediction output for COVID-19 lesion segmentation. The proposed model has been applied to the MedSeg COVID-19 chest CT segmentation dataset. Data pre-processing methods help the training process and improve performance. We compare the performance of the proposed DNN model with state-of-the-art models by computing the well-known metrics: dice coefficient, Jaccard coefficient, accuracy, specificity, sensitivity, and precision. As a result, the proposed model outperforms the state-of-the-art models. This new model may be considered an efficient automated screening system for COVID-19 diagnosis and can potentially improve patient health care and management system.

A systematic approach to deep learning-based nodule detection in chest radiographs

Lung cancer is a serious disease responsible for millions of deaths every year. Early stages of lung cancer can be manifested in pulmonary lung nodules. To assist radiologists in reducing the number of overseen nodules and to increase the detection accuracy in general, automatic detection algorithms have been proposed. Particularly, deep learning methods are promising. However, obtaining clinically relevant results remains challenging. While a variety of approaches have been proposed for general purpose object detection, these are typically evaluated on benchmark data sets. Achieving competitive performance for specific real-world problems like lung nodule detection typically requires careful analysis of the problem at hand and the selection and tuning of suitable deep learning models. We present a systematic comparison of state-of-the-art object detection algorithms for the task of lung nodule detection. In this regard, we address the critical aspect of class imbalance and and demonstrate a data augmentation approach as well as transfer learning to boost performance. We illustrate how this analysis and a combination of multiple architectures results in state-of-the-art performance for lung nodule detection, which is demonstrated by the proposed model winning the detection track of the Node21 competition. The code for our approach is available at https://github.com/FinnBehrendt/node21-submit.

Estimating the Volume of Nodules and Masses on Serial Chest Radiography Using a Deep-Learning-Based Automatic Detection Algorithm: A Preliminary Study

BACKGROUND

The purpose of this study was to assess the volume of the pulmonary nodules and masses on serial chest X-rays (CXRs) from deep-learning-based automatic detection algorithm (DLAD)-based parameters.

METHODS

In a retrospective single-institutional study, 72 patients, who obtained serial CXRs (n = 147) for pulmonary nodules or masses with corresponding chest CT images as the reference standards, were included. A pre-trained DLAD based on a convolutional neural network was developed to detect and localize nodules using 13,710 radiographs and to calculate a localization map and the derived parameters (e.g., the area and mean probability value of pulmonary nodules) for each CXR, including serial follow-ups. For validation, reference 3D CT volumes were measured semi-automatically. Volume prediction models for pulmonary nodules were established through univariable or multivariable, and linear or non-linear regression analyses with the parameters. A polynomial regression analysis was performed as a method of a non-linear regression model.

RESULTS

Of the 147 CXRs and 208 nodules of 72 patients, the mean volume of nodules or masses was measured as 9.37 ± 11.69 cm³ (mean ± standard deviation). The area and CT volume demonstrated a linear correlation of moderate strength (i.e., R = 0.58, RMSE: 9449.9 mm³ m³ in a linear regression analysis). The area and mean probability values exhibited a strong linear correlation (R = 0.73). The volume prediction performance based on a multivariable regression model was best with a mean probability and unit-adjusted area (i.e.

, RMSE

7975.6 mm³, the smallest among the other variable parameters).

CONCLUSIONS

The prediction model with the area and the mean probability based on the DLAD showed a rather accurate quantitative estimation of pulmonary nodule or mass volume and the change in serial CXRs.

Artificial Intelligence-Based Software with CE Mark for Chest X-ray Interpretation: Opportunities and Challenges

Chest X-ray (CXR) is the most important technique for performing chest imaging, despite its well-known limitations in terms of scope and sensitivity. These intrinsic limitations of CXR have prompted the development of several artificial intelligence (AI)-based software packages dedicated to CXR interpretation. The online database "AI for radiology" was queried to identify CE-marked AI-based software available for CXR interpretation. The returned studies were divided according to the targeted disease. AI-powered computer-aided detection software is already widely adopted in screening and triage for pulmonary tuberculosis, especially in countries with few resources and suffering from high a burden of this disease. AI-based software has also been demonstrated to be valuable for the detection of lung nodules detection, automated flagging of positive cases, and post-processing through the development of digital bone suppression software able to produce digital bone suppressed images. Finally, the majority of available CE-marked software packages for CXR are designed to recognize several findings, with potential differences in sensitivity and specificity for each of the recognized findings.

Review on chest pathogies detection systems using deep learning techniques

Chest radiography is the standard and most affordable way to diagnose, analyze, and examine different thoracic and chest diseases. Typically, the radiograph is examined by an expert radiologist or physician to decide about a particular anomaly, if exists. Moreover, computer-aided methods are used to assist radiologists and make the analysis process accurate, fast, and more automated. A tremendous improvement in automatic chest pathologies detection and analysis can be observed with the emergence of deep learning. The survey aims to review, technically evaluate, and synthesize the different computer-aided chest pathologies detection systems. The state-of-the-art of single and multi-pathologies detection systems, which are published in the last five years, are thoroughly discussed. The taxonomy of image acquisition, dataset preprocessing, feature extraction, and deep learning models are presented. The mathematical concepts related to feature extraction model architectures are discussed. Moreover, the different articles are compared based on their contributions, datasets, methods used, and the results achieved. The article ends with the main findings, current trends, challenges, and future recommendations.

Implementation of artificial intelligence in thoracic imaging-a what, how, and why guide from the European Society of Thoracic Imaging (ESTI)

This statement from the European Society of Thoracic imaging (ESTI) explains and summarises the essentials for understanding and implementing Artificial intelligence (AI) in clinical practice in thoracic radiology departments. This document discusses the current AI scientific evidence in thoracic imaging, its potential clinical utility, implementation and costs, training requirements and validation, its' effect on the training of new radiologists, post-implementation issues, and medico-legal and ethical issues. All these issues have to be addressed and overcome, for AI to become implemented clinically in thoracic radiology. KEY POINTS: • Assessing the datasets used for training and validation of the AI system is essential. • A departmental strategy and business plan which includes continuing quality assurance of AI system and a sustainable financial plan is important for successful implementation. • Awareness of the negative effect on training of new radiologists is vital.

Benign incidental cardiac findings in chest and cardiac CT imaging

With the continuous expansion of the disease scope of chest CT and cardiac CT, the number of these CT examinations has increased rapidly. In addition to their common indications, many incidental cardiac findings can be observed when carefully evaluating the coronary arteries, valves, pericardium, ventricles, and large vessels. These findings may have clinical significance or risk of complications, but they are sometimes overlooked or may not be described in the final reports. Although most of the incidental findings are benign, timely detection and treatment can improve the management of chronic diseases or reduce the possibility of severe complications. In this review, we summarized the imaging findings, incidence rate, and clinical relevance of some benign cardiac findings such as coronary artery calcification, aortic and mitral valve calcification, aortic calcification, cardiac thrombus, myocardial bridge, aortic dilation, cardiac myxoma, pericardial cyst, and coronary artery fistula. Reporting incidental cardiac findings will help reduce the risk of severe complications or disease deterioration and contribute to the recovery of patients.

Development and Validation of a Deep Learning-Based Synthetic Bone-Suppressed Model for Pulmonary Nodule Detection in Chest Radiographs

Importance

Dual-energy chest radiography exhibits better sensitivity than single-energy chest radiography, partly due to its ability to remove overlying anatomical structures.

Objectives

To develop and validate a deep learning-based synthetic bone-suppressed (DLBS) nodule-detection algorithm for pulmonary nodule detection on chest radiographs.

Design, Setting, and Participants

This decision analytical modeling study used data from 3 centers between November 2015 and July 2019 from 1449 patients. The DLBS nodule-detection algorithm was trained using single-center data (institute 1) of 998 chest radiographs. The DLBS algorithm was validated using 2 external data sets (institute 2, 246 patients; and institute 3, 205 patients). Statistical analysis was performed from March to December 2021.

Exposures

DLBS nodule-detection algorithm.

Main Outcomes and Measures

The nodule-detection performance of DLBS model was compared with the convolution neural network nodule-detection algorithm (original model). Reader performance testing was conducted by 3 thoracic radiologists assisted by the DLBS algorithm or not. Sensitivity and false-positive markings per image (FPPI) were compared.

Results

Training data consisted of 998 patients (539 men [54.0%]; mean [SD] age, 54.2 [9.82] years), and 2 external validation data sets consisted of 246 patients (133 men [54.1%]; mean [SD] age, 55.3 [8.7] years) and 205 patients (105 men [51.2%]; mean [SD] age, 51.8 [9.1] years). Using the external validation data set of institute 2, the bone-suppressed model showed higher sensitivity compared with that of the original model for nodule detection (91.5% [109 of 119] vs 79.8% [95 of 119]; P < .001). The overall mean of FPPI with the bone-suppressed model was reduced compared with the original model (0.07 [17 of 246] vs 0.09 [23 of 246]; P < .001). For the observer performance testing with the data of institute 3, the mean sensitivity of 3 radiologists was 77.5% (95% [CI], 69.9%-85.2%), whereas that of radiologists assisted by DLBS modeling was 92.1% (95% CI, 86.3%-97.3%; P < .001). The 3 radiologists had a reduced number of FPPI when assisted by the DLBS model (0.071 [95% CI, 0.041-0.111] vs 0.151 [95% CI, 0.111-0.210]; P < .001).

Conclusions and Relevance

This decision analytical modeling study found that the DLBS model was more sensitive to detecting pulmonary nodules on chest radiographs compared with the original model. These findings suggest that the DLBS model could be beneficial to radiologists in the detection of lung nodules in chest radiographs without need of the specialized equipment or increase of radiation dose.

A Survey on AI Techniques for Thoracic Diseases Diagnosis Using Medical Images

Thoracic diseases refer to disorders that affect the lungs, heart, and other parts of the rib cage, such as pneumonia, novel coronavirus disease (COVID-19), tuberculosis, cardiomegaly, and fracture. Millions of people die every year from thoracic diseases. Therefore, early detection of these diseases is essential and can save many lives. Earlier, only highly experienced radiologists examined thoracic diseases, but recent developments in image processing and deep learning techniques are opening the door for the automated detection of these diseases. In this paper, we present a comprehensive review including: types of thoracic diseases; examination types of thoracic images; image pre-processing; models of deep learning applied to the detection of thoracic diseases (e.g., pneumonia, COVID-19, edema, fibrosis, tuberculosis, chronic obstructive pulmonary disease (COPD), and lung cancer); transfer learning background knowledge; ensemble learning; and future initiatives for improving the efficacy of deep learning models in applications that detect thoracic diseases. Through this survey paper, researchers may be able to gain an overall and systematic knowledge of deep learning applications in medical thoracic images. The review investigates a performance comparison of various models and a comparison of various datasets.

An effective detection of COVID-19 using adaptive dual-stage horse herd bidirectional long short-term memory framework

COVID-19 is a quickly increasing severe viral disease that affects the human beings as well as animals. The increasing amount of infection and death due to COVID-19 needs timely detection. This work presented an innovative deep learning methodology for the prediction of COVID-19 patients with chest x-ray images. Chest x-ray is the most effective imaging technique for predicting the lung associated diseases. An effective approach with adaptive dual-stage horse herd bidirectional LSTM model is presented for the classification of images into normal, lung opacity, viral pneumonia, and COVID-19. Initially, the input images are preprocessed using modified histogram equalization approach. This is utilized to improve the contrast of the images by changing low-resolution images into high-resolution images. Subsequently, an extended dual tree complex wavelet with trigonometric transform is introduced to extract the high-density features to decrease the complexity of features. Moreover, the dimensionality of the features reduced by adaptive beetle antennae search optimization is utilized. This approach enhances the performance of disease classification by reducing the computational complexity. Finally, an adaptive dual-stage horse herd bidirectional LSTM model is utilized for the classification of images into normal, viral pneumonia, lung opacity, and COVID-19. The implementation platform used in the work is PYTHON. The performance of the presented approach is proved by comparing with the existing approaches in accuracy (99.07%), sensitivity (97.6%), F-measure (97.1%), specificity (99.36%), kappa coefficient (97.7%), precision (98.56%), and area under the receiver operating characteristic curve (99%) for COVID-19 chest x-ray database.

Diagnostic validation of a deep learning nodule detection algorithm in low-dose chest CT: determination of optimized dose thresholds in a virtual screening scenario

OBJECTIVES

This study was conducted to evaluate the effect of dose reduction on the performance of a deep learning (DL)-based computer-aided diagnosis (CAD) system regarding pulmonary nodule detection in a virtual screening scenario.

METHODS

Sixty-eight anthropomorphic chest phantoms were equipped with 329 nodules (150 ground glass, 179 solid) with four sizes (5 mm, 8 mm, 10 mm, 12 mm) and scanned with nine tube voltage/current combinations. The examinations were analyzed by a commercially available DL-based CAD system. The results were compared by a comparison of proportions. Logistic regression was performed to evaluate the impact of tube voltage, tube current, nodule size, nodule density, and nodule location.

RESULTS

The combination with the lowest effective dose (E) and unimpaired detection rate was 80 kV/50 mAs (sensitivity: 97.9%, mean false-positive rate (FPR): 1.9, mean CTDIvol: 1.2 ± 0.4 mGy, mean E: 0.66 mSv). Logistic regression revealed that tube voltage and current had the greatest impact on the detection rate, while nodule size and density had no significant influence.

CONCLUSIONS

The optimal tube voltage/current combination proposed in this study (80 kV/50 mAs) is comparable to the proposed combinations in similar studies, which mostly dealt with conventional CAD software. Modification of tube voltage and tube current has a significant impact on the performance of DL-based CAD software in pulmonary nodule detection regardless of their size and composition.

KEY POINTS

• Modification of tube voltage and tube current has a significant impact on the performance of deep learning-based CAD software. • Nodule size and composition have no significant impact on the software's performance. • The optimal tube voltage/current combination for the examined software is 80 kV/50 mAs.

Mortality Prediction of COVID-19 Patients Using Radiomic and Neural Network Features Extracted from a Wide Chest X-ray Sample Size: A Robust Approach for Different Medical Imbalanced Scenarios

Aim: The aim of this study was to develop robust prognostic models for mortality prediction of COVID-19 patients, applicable to different sets of real scenarios, using radiomic and neural network features extracted from chest X-rays (CXRs) with a certified and commercially available software. Methods: 1816 patients from 5 different hospitals in the Province of Reggio Emilia were included in the study. Overall, 201 radiomic features and 16 neural network features were extracted from each COVID-19 patient’s radiography. The initial dataset was balanced to train the classifiers with the same number of dead and survived patients, randomly selected. The pipeline had three main parts: balancing procedure; three-step feature selection; and mortality prediction with radiomic features through three machine learning (ML) classification models: AdaBoost (ADA), Quadratic Discriminant Analysis (QDA) and Random Forest (RF). Five evaluation metrics were computed on the test samples. The performance for death prediction was validated on both a balanced dataset (Case 1) and an imbalanced dataset (Case 2). Results: accuracy (ACC), area under the ROC-curve (AUC) and sensitivity (SENS) for the best classifier were, respectively, 0.72 ± 0.01, 0.82 ± 0.02 and 0.84 ± 0.04 for Case 1 and 0.70 ± 0.04, 0.79 ± 0.03 and 0.76 ± 0.06 for Case 2. These results show that the prediction of COVID-19 mortality is robust in a different set of scenarios. Conclusions: Our large and varied dataset made it possible to train ML algorithms to predict COVID-19 mortality using radiomic and neural network features of CXRs.

Hybridizing Convolutional Neural Network for Classification of Lung Diseases

Pulmonary disease is widespread worldwide. There is persistent blockage of the lungs, pneumonia, asthma, TB, etc. It is essential to diagnose the lungs promptly. For this reason, machine learning models were developed. For lung disease prediction, many deep learning technologies, including the CNN, and the capsule network, are used. The fundamental CNN has low rotating, inclined, or other irregular image orientation efficiency. Therefore by integrating the space transformer network (STN) with CNN, we propose a new hybrid deep learning architecture named STNCNN. The new model is implemented on the dataset from the Kaggle repository for an NIH chest X-ray image. STNCNN has an accuracy of 69% in respect of the entire dataset, while the accuracy values of vanilla grey, vanilla RGB, hybrid CNN are 67.8%, 69.5%, and 63.8%, respectively. When the sample data set is applied, STNCNN takes much less time to train at the cost of a slightly less reliable validation. Therefore both specialists and physicians are simplified by the proposed STNCNN System for the diagnosis of lung disease.

Automated detection of COVID-19 cases from chest X-ray images using deep neural network and XGBoost

Introduction

In late 2019 and after the COVID-19 pandemic in the world, many researchers and scholars tried to provide methods for detecting COVID-19 cases. Accordingly, this study focused on identifying patients with COVID-19 from chest X-ray images.

Methods

In this paper, a method for diagnosing coronavirus disease from X-ray images was developed. In this method, DenseNet169 Deep Neural Network (DNN) was used to extract the features of X-ray images taken from the patients’ chests. The extracted features were then given as input to the Extreme Gradient Boosting (XGBoost) algorithm to perform the classification task.

Results

Evaluation of the proposed approach and its comparison with the methods presented in recent years revealed that this method was more accurate and faster than the existing ones and had an acceptable performance for detecting COVID-19 cases from X-ray images. The experiments showed 98.23% and 89.70% accuracy, 99.78% and 100% specificity, 92.08% and 95.20% sensitivity in two and three-class problems, respectively.

Conclusion

This study aimed to detect people with COVID-19, focusing on non-clinical approaches. The developed method could be employed as an initial detection tool to assist the radiologists in more accurate and faster diagnosing the disease.

Implication for practice

The proposed method's simple implementation, along with its acceptable accuracy, allows it to be used in COVID-19 diagnosis. Moreover, the gradient-based class activation mapping (Grad-CAM) can be used to represent the deep neural network's decision area on a heatmap. Radiologists might use this heatmap to evaluate the chest area more accurately.

Diagnosis of hypercritical chronic pulmonary disorders using dense convolutional network through chest radiography

Lung-related ailments are prevalent all over the world which majorly includes asthma, chronic obstructive pulmonary disease (COPD), tuberculosis, pneumonia, fibrosis, etc. and now COVID-19 is added to this list. Infection of COVID-19 poses respirational complications with other indications like cough, high fever, and pneumonia. WHO had identified cancer in the lungs as a fatal cancer type amongst others and thus, the timely detection of such cancer is pivotal for an individual's health. Since the elementary convolutional neural networks have not performed fairly well in identifying atypical image types hence, we recommend a novel and completely automated framework with a deep learning approach for the recognition and classification of chronic pulmonary disorders (CPD) and COVID-pneumonia using Thoracic or Chest X-Ray (CXR) images. A novel three-step, completely automated, approach is presented that first extracts the region of interest from CXR images for preprocessing, and they are then used to detects infected lungs X-rays from the Normal ones. Thereafter, the infected lung images are further classified into COVID-pneumonia, pneumonia, and other chronic pulmonary disorders (OCPD), which might be utilized in the current scenario to help the radiologist in substantiating their diagnosis and in starting well in time treatment of these deadly lung diseases. And finally, highlight the regions in the CXR which are indicative of severe chronic pulmonary disorders like COVID-19 and pneumonia. A detailed investigation of various pivotal parameters based on several experimental outcomes are made here. This paper presents an approach that detects the Normal lung X-rays from infected ones and the infected lung images are further classified into COVID-pneumonia, pneumonia, and other chronic pulmonary disorders with an utmost accuracy of 96.8%. Several other collective performance measurements validate the superiority of the presented model. The proposed framework shows effective results in classifying lung images into Normal, COVID-pneumonia, pneumonia, and other chronic pulmonary disorders (OCPD). This framework can be effectively utilized in this current pandemic scenario to help the radiologist in substantiating their diagnosis and in starting well in time treatment of these deadly lung diseases.

Current and emerging artificial intelligence applications in chest imaging: a pediatric perspective

Artificial intelligence (AI) applications for chest radiography and chest CT are among the most developed applications in radiology. More than 40 certified AI products are available for chest radiography or chest CT. These AI products cover a wide range of abnormalities, including pneumonia, pneumothorax and lung cancer. Most applications are aimed at detecting disease, complemented by products that characterize or quantify tissue. At present, none of the thoracic AI products is specifically designed for the pediatric population. However, some products developed to detect tuberculosis in adults are also applicable to children. Software is under development to detect early changes of cystic fibrosis on chest CT, which could be an interesting application for pediatric radiology. In this review, we give an overview of current AI products in thoracic radiology and cover recent literature about AI in chest radiography, with a focus on pediatric radiology. We also discuss possible pediatric applications.

Assessment of the effect of a comprehensive chest radiograph deep learning model on radiologist reports and patient outcomes: a real-world observational study

OBJECTIVES

Artificial intelligence (AI) algorithms have been developed to detect imaging features on chest X-ray (CXR) with a comprehensive AI model capable of detecting 124 CXR findings being recently developed. The aim of this study was to evaluate the real-world usefulness of the model as a diagnostic assistance device for radiologists.

DESIGN

This prospective real-world multicentre study involved a group of radiologists using the model in their daily reporting workflow to report consecutive CXRs and recording their feedback on level of agreement with the model findings and whether this significantly affected their reporting.

SETTING

The study took place at radiology clinics and hospitals within a large radiology network in Australia between November and December 2020.

PARTICIPANTS

Eleven consultant diagnostic radiologists of varying levels of experience participated in this study.

PRIMARY AND SECONDARY OUTCOME MEASURES

Proportion of CXR cases where use of the AI model led to significant material changes to the radiologist report, to patient management, or to imaging recommendations. Additionally, level of agreement between radiologists and the model findings, and radiologist attitudes towards the model were assessed.

RESULTS

Of 2972 cases reviewed with the model, 92 cases (3.1%) had significant report changes, 43 cases (1.4%) had changed patient management and 29 cases (1.0%) had further imaging recommendations. In terms of agreement with the model, 2569 cases showed complete agreement (86.5%). 390 (13%) cases had one or more findings rejected by the radiologist. There were 16 findings across 13 cases (0.5%) deemed to be missed by the model. Nine out of 10 radiologists felt their accuracy was improved with the model and were more positive towards AI poststudy.

CONCLUSIONS

Use of an AI model in a real-world reporting environment significantly improved radiologist reporting and showed good agreement with radiologists, highlighting the potential for AI diagnostic support to improve clinical practice.

An Artificial Intelligence-Based Chest X-ray Model on Human Nodule Detection Accuracy From a Multicenter Study

IMPORTANCE

Most early lung cancers present as pulmonary nodules on imaging, but these can be easily missed on chest radiographs.

OBJECTIVE

To assess if a novel artificial intelligence (AI) algorithm can help detect pulmonary nodules on radiographs at different levels of detection difficulty.

DESIGN, SETTING, AND PARTICIPANTS

This diagnostic study included 100 posteroanterior chest radiograph images taken between 2000 and 2010 of adult patients from an ambulatory health care center in Germany and a lung image database in the US. Included images were selected to represent nodules with different levels of detection difficulties (from easy to difficult), and comprised both normal and nonnormal control.

EXPOSURES

All images were processed with a novel AI algorithm, the AI Rad Companion Chest X-ray. Two thoracic radiologists established the ground truth and 9 test radiologists from Germany and the US independently reviewed all images in 2 sessions (unaided and AI-aided mode) with at least a 1-month washout period.

MAIN OUTCOMES AND MEASURES

Each test radiologist recorded the presence of 5 findings (pulmonary nodules, atelectasis, consolidation, pneumothorax, and pleural effusion) and their level of confidence for detecting the individual finding on a scale of 1 to 10 (1 representing lowest confidence; 10, highest confidence). The analyzed metrics for nodules included sensitivity, specificity, accuracy, and receiver operating characteristics curve area under the curve (AUC).

RESULTS

Images from 100 patients were included, with a mean (SD) age of 55 (20) years and including 64 men and 36 women. Mean detection accuracy across the 9 radiologists improved by 6.4% (95% CI, 2.3% to 10.6%) with AI-aided interpretation compared with unaided interpretation. Partial AUCs within the effective interval range of 0 to 0.2 false positive rate improved by 5.6% (95% CI, -1.4% to 12.0%) with AI-aided interpretation. Junior radiologists saw greater improvement in sensitivity for nodule detection with AI-aided interpretation as compared with their senior counterparts (12%; 95% CI, 4% to 19% vs 9%; 95% CI, 1% to 17%) while senior radiologists experienced similar improvement in specificity (4%; 95% CI, -2% to 9%) as compared with junior radiologists (4%; 95% CI, -3% to 5%).

CONCLUSIONS AND RELEVANCE

In this diagnostic study, an AI algorithm was associated with improved detection of pulmonary nodules on chest radiographs compared with unaided interpretation for different levels of detection difficulty and for readers with different experience.

Radiography image analysis using cat swarm optimized deep belief networks

Radiography images are widely utilized in the health sector to recognize the patient health condition. The noise and irrelevant region information minimize the entire disease detection accuracy and computation complexity. Therefore, in this study, statistical Kolmogorov–Smirnov test has been integrated with wavelet transform to overcome the de-noising issues. Then the cat swarm-optimized deep belief network is applied to extract the features from the affected region. The optimized deep learning model reduces the feature training cost and time and improves the overall disease detection accuracy. The network learning process is enhanced according to the AdaDelta learning process, which replaces the learning parameter with a delta value. This process minimizes the error rate while recognizing the disease. The efficiency of the system evaluated using image retrieval in medical application dataset. This process helps to determine the various diseases such as breast, lung, and pediatric studies.

Automation of Lung Ultrasound Interpretation via Deep Learning for the Classification of Normal versus Abnormal Lung Parenchyma: A Multicenter Study

Lung ultrasound (LUS) is an accurate thoracic imaging technique distinguished by its handheld size, low-cost, and lack of radiation. User dependence and poor access to training have limited the impact and dissemination of LUS outside of acute care hospital environments. Automated interpretation of LUS using deep learning can overcome these barriers by increasing accuracy while allowing point-of-care use by non-experts. In this multicenter study, we seek to automate the clinically vital distinction between A line (normal parenchyma) and B line (abnormal parenchyma) on LUS by training a customized neural network using 272,891 labelled LUS images. After external validation on 23,393 frames, pragmatic clinical application at the clip level was performed on 1162 videos. The trained classifier demonstrated an area under the receiver operating curve (AUC) of 0.96 (±0.02) through 10-fold cross-validation on local frames and an AUC of 0.93 on the external validation dataset. Clip-level inference yielded sensitivities and specificities of 90% and 92% (local) and 83% and 82% (external), respectively, for detecting the B line pattern. This study demonstrates accurate deep-learning-enabled LUS interpretation between normal and abnormal lung parenchyma on ultrasound frames while rendering diagnostically important sensitivity and specificity at the video clip level.

Using Artificial Intelligence for High-Volume Identification of Silicosis and Tuberculosis: A Bio-Ethics Approach

Although Artificial Intelligence (AI) is being increasingly applied, considerable distrust about introducing "disruptive" technologies persists. Intrinsic and contextual factors influencing where and how such innovations are introduced therefore require careful scrutiny to ensure that health equity is promoted. To illustrate one such critical approach, we describe and appraise an AI application - the development of computer assisted diagnosis (CAD) to support more efficient adjudication of compensation claims from former gold miners with occupational lung disease in Southern Africa. In doing so, we apply a bio-ethical lens that considers the principles of beneficence, non-maleficence, autonomy and justice and add explicability as a core principle. We draw on the AI literature, our research on CAD validation and process efficiency, as well as apprehensions of users and stakeholders. Issues of concern included AI accuracy, biased training of AI systems, data privacy, impact on human skill development, transparency and accountability in AI use, as well as intellectual property ownership. We discuss ways in which each of these potential obstacles to successful use of CAD could be mitigated. We conclude that efforts to overcoming technical challenges in applying AI must be accompanied from the onset by attention to ensuring its ethical use.

Deep learning-based automated detection of pulmonary embolism on CT pulmonary angiograms: No significant effects on report communication times and patient turnaround in the emergency department nine months after technical implementation

OBJECTIVES

Rapid communication of CT exams positive for pulmonary embolism (PE) is crucial for timely initiation of anticoagulation and patient outcome. It is unknown if deep learning automated detection of PE on CT Pulmonary Angiograms (CTPA) in combination with worklist prioritization and an electronic notification system (ENS) can improve communication times and patient turnaround in the Emergency Department (ED).

METHODS

In 01/2019, an ENS allowing direct communication between radiology and ED was installed. Starting in 10/2019, CTPAs were processed by a deep learning (DL)-powered algorithm for detection of PE. CTPAs acquired between 04/2018 and 06/2020 (n = 1808) were analysed. To assess the impact of the ENS and the DL-algorithm, radiology report reading times (RRT), radiology report communication time (RCT), time to anticoagulation (TTA), and patient turnaround times (TAT) in the ED were compared for three consecutive time periods. Performance measures of the algorithm were calculated on a per exam level (sensitivity, specificity, PPV, NPV, F1-score), with written reports and exam review as ground truth.

RESULTS

Sensitivity of the algorithm was 79.6 % (95 %CI:70.8-87.2%), specificity 95.0 % (95 %CI:92.0-97.1%), PPV 82.2 % (95 %CI:73.9-88.3), and NPV 94.1 % (95 %CI:91.4-96 %). There was no statistically significant reduction of any of the observed times (RRT, RCT, TTA, TAT).

CONCLUSION

DL-assisted detection of PE in CTPAs and ENS-assisted communication of results to referring physicians technically work. However, the mere clinical introduction of these tools, even if they exhibit a good performance, is not sufficient to achieve significant effects on clinical performance measures.

Performance and educational training of radiographers in lung nodule or mass detection: Retrospective comparison with different deep learning algorithms

The aim of this investigation was to compare the diagnostic performance of radiographers and deep learning algorithms in pulmonary nodule/mass detection on chest radiograph.A test set of 100 chest radiographs containing 53 cases with no pathology (normal) and 47 abnormal cases (pulmonary nodules/masses) independently interpreted by 6 trained radiographers and deep learning algorithems in a random order. The diagnostic performances of both deep learning algorithms and trained radiographers for pulmonary nodules/masses detection were compared.QUIBIM Chest X-ray Classifier, a deep learning through mass algorithm that performs superiorly to practicing radiographers in the detection of pulmonary nodules/masses (AUCMass: 0.916 vs AUCTrained radiographer: 0.778, P < .001). In addition, heat-map algorithm could automatically detect and localize pulmonary nodules/masses in chest radiographs with high specificity.In conclusion, the deep-learning based computer-aided diagnosis system through 4 algorithms could potentially assist trained radiographers by increasing the confidence and access to chest radiograph interpretation in the age of digital age with the growing demand of medical imaging usage and radiologist burnout.

Deep learning for chest X-ray analysis: A survey

Recent advances in deep learning have led to a promising performance in many medical image analysis tasks. As the most commonly performed radiological exam, chest radiographs are a particularly important modality for which a variety of applications have been researched. The release of multiple, large, publicly available chest X-ray datasets in recent years has encouraged research interest and boosted the number of publications. In this paper, we review all studies using deep learning on chest radiographs published before March 2021, categorizing works by task: image-level prediction (classification and regression), segmentation, localization, image generation and domain adaptation. Detailed descriptions of all publicly available datasets are included and commercial systems in the field are described. A comprehensive discussion of the current state of the art is provided, including caveats on the use of public datasets, the requirements of clinically useful systems and gaps in the current literature.

Performance of an AI based CAD system in solid lung nodule detection on chest phantom radiographs compared to radiology residents and fellow radiologists

Background

Despite the decreasing relevance of chest radiography in lung cancer screening, chest radiography is still frequently applied to assess for lung nodules. The aim of the current study was to determine the accuracy of a commercial AI based CAD system for the detection of artificial lung nodules on chest radiograph phantoms and compare the performance to radiologists in training.

Methods

Sixty-one anthropomorphic lung phantoms were equipped with 140 randomly deployed artificial lung nodules (5, 8, 10, 12 mm). A random generator chose nodule size and distribution before a two-plane chest X-ray (CXR) of each phantom was performed. Seven blinded radiologists in training (2 fellows, 5 residents) with 2 to 5 years of experience in chest imaging read the CXRs on a PACS-workstation independently. Results of the software were recorded separately. McNemar test was used to compare each radiologist’s results to the AI-computer-aided-diagnostic (CAD) software in a per-nodule and a per-phantom approach and Fleiss-Kappa was applied for inter-rater and intra-observer agreements.

Results

Five out of seven readers showed a significantly higher accuracy than the AI algorithm. The pooled accuracies of the radiologists in a nodule-based and a phantom-based approach were 0.59 and 0.82 respectively, whereas the AI-CAD showed accuracies of 0.47 and 0.67, respectively. Radiologists’ average sensitivity for 10 and 12 mm nodules was 0.80 and dropped to 0.66 for 8 mm (P=0.04) and 0.14 for 5 mm nodules (P<0.001). The radiologists and the algorithm both demonstrated a significant higher sensitivity for peripheral compared to central nodules (0.66 vs. 0.48; P=0.004 and 0.64 vs. 0.094; P=0.025, respectively). Inter-rater agreements were moderate among the radiologists and between radiologists and AI-CAD software (K’=0.58±0.13 and 0.51±0.1). Intra-observer agreement was calculated for two readers and was almost perfect for the phantom-based (K’=0.85±0.05; K’=0.80±0.02); and substantial to almost perfect for the nodule-based approach (K’=0.83±0.02; K’=0.78±0.02).

Conclusions

The AI based CAD system as a primary reader acts inferior to radiologists regarding lung nodule detection in chest phantoms. Chest radiography has reasonable accuracy in lung nodule detection if read by a radiologist alone and may be further optimized by an AI based CAD system as a second reader.

Diagnostic accuracy of deep learning in medical imaging: a systematic review and meta-analysis

Deep learning (DL) has the potential to transform medical diagnostics. However, the diagnostic accuracy of DL is uncertain. Our aim was to evaluate the diagnostic accuracy of DL algorithms to identify pathology in medical imaging. Searches were conducted in Medline and EMBASE up to January 2020. We identified 11,921 studies, of which 503 were included in the systematic review. Eighty-two studies in ophthalmology, 82 in breast disease and 115 in respiratory disease were included for meta-analysis. Two hundred twenty-four studies in other specialities were included for qualitative review. Peer-reviewed studies that reported on the diagnostic accuracy of DL algorithms to identify pathology using medical imaging were included. Primary outcomes were measures of diagnostic accuracy, study design and reporting standards in the literature. Estimates were pooled using random-effects meta-analysis. In ophthalmology, AUC's ranged between 0.933 and 1 for diagnosing diabetic retinopathy, age-related macular degeneration and glaucoma on retinal fundus photographs and optical coherence tomography. In respiratory imaging, AUC's ranged between 0.864 and 0.937 for diagnosing lung nodules or lung cancer on chest X-ray or CT scan. For breast imaging, AUC's ranged between 0.868 and 0.909 for diagnosing breast cancer on mammogram, ultrasound, MRI and digital breast tomosynthesis. Heterogeneity was high between studies and extensive variation in methodology, terminology and outcome measures was noted. This can lead to an overestimation of the diagnostic accuracy of DL algorithms on medical imaging. There is an immediate need for the development of artificial intelligence-specific EQUATOR guidelines, particularly STARD, in order to provide guidance around key issues in this field.

[Artificial intelligence in oncological radiology : A (p)review]

BACKGROUND

Artificial intelligence (AI) has the potential to fundamentally change medicine within the coming decades. Radiological imaging is one of the primary fields of its clinical application.

OBJECTIVES

In this article, we summarize previous AI developments with a focus on oncological radiology. Based on selected examples, we derive scenarios for developments in the next 10 years.

MATERIALS AND METHODS

This work is based on a review of various literature and product databases, publications by regulatory authorities, reports, and press releases.

CONCLUSIONS

The clinical use of AI applications is still in an early stage of development. The large number of research publications shows the potential of the field. Several certified products have already become available to users. However, for a widespread adoption of AI applications in clinical routine, several fundamental prerequisites are still awaited. These include the generation of evidence justifying the use of algorithms through representative clinical studies, adjustments to the framework for approval processes and dedicated education and teaching resources for its users. It is expected that use of AI methods will increase, thus, creating new opportunities for improved diagnostics, therapy, and more efficient workflows.

Cascaded deep learning classifiers for computer-aided diagnosis of COVID-19 and pneumonia diseases in X-ray scans

Computer-aided diagnosis (CAD) systems are considered a powerful tool for physicians to support identification of the novel Coronavirus Disease 2019 (COVID-19) using medical imaging modalities. Therefore, this article proposes a new framework of cascaded deep learning classifiers to enhance the performance of these CAD systems for highly suspected COVID-19 and pneumonia diseases in X-ray images. Our proposed deep learning framework constitutes two major advancements as follows. First, complicated multi-label classification of X-ray images have been simplified using a series of binary classifiers for each tested case of the health status. That mimics the clinical situation to diagnose potential diseases for a patient. Second, the cascaded architecture of COVID-19 and pneumonia classifiers is flexible to use different fine-tuned deep learning models simultaneously, achieving the best performance of confirming infected cases. This study includes eleven pre-trained convolutional neural network models, such as Visual Geometry Group Network (VGG) and Residual Neural Network (ResNet). They have been successfully tested and evaluated on public X-ray image dataset for normal and three diseased cases. The results of proposed cascaded classifiers showed that VGG16, ResNet50V2, and Dense Neural Network (DenseNet169) models achieved the best detection accuracy of COVID-19, viral (Non-COVID-19) pneumonia, and bacterial pneumonia images, respectively. Furthermore, the performance of our cascaded deep learning classifiers is superior to other multi-label classification methods of COVID-19 and pneumonia diseases in previous studies. Therefore, the proposed deep learning framework presents a good option to be applied in the clinical routine to assist the diagnostic procedures of COVID-19 infection.

Hybrid deep learning for detecting lung diseases from X-ray images

Lung disease is common throughout the world. These include chronic obstructive pulmonary disease, pneumonia, asthma, tuberculosis, fibrosis, etc. Timely diagnosis of lung disease is essential. Many image processing and machine learning models have been developed for this purpose. Different forms of existing deep learning techniques including convolutional neural network (CNN), vanilla neural network, visual geometry group based neural network (VGG), and capsule network are applied for lung disease prediction. The basic CNN has poor performance for rotated, tilted, or other abnormal image orientation. Therefore, we propose a new hybrid deep learning framework by combining VGG, data augmentation and spatial transformer network (STN) with CNN. This new hybrid method is termed here as VGG Data STN with CNN (VDSNet). As implementation tools, Jupyter Notebook, Tensorflow, and Keras are used. The new model is applied to NIH chest X-ray image dataset collected from Kaggle repository. Full and sample versions of the dataset are considered. For both full and sample datasets, VDSNet outperforms existing methods in terms of a number of metrics including precision, recall, F0.5 score and validation accuracy. For the case of full dataset, VDSNet exhibits a validation accuracy of 73%, while vanilla gray, vanilla RGB, hybrid CNN and VGG, and modified capsule network have accuracy values of 67.8%, 69%, 69.5% and 63.8%, respectively. When sample dataset rather than full dataset is used, VDSNet requires much lower training time at the expense of a slightly lower validation accuracy. Hence, the proposed VDSNet framework will simplify the detection of lung disease for experts as well as for doctors.