Efficient removal of cadmium and 2-chlorophenol in aqueous systems by natural clay: Adsorption and photo-Fenton degradation processes

Aluminosilicates-based nanosorbents for heavy metal removal - A review

Contamination of water bodies with heavy metals poses a significant threat to human health and the environment, requiring the development of effective treatment techniques. In this context, aluminosilicates emerge as promising sorbents due to their cost-effectiveness and natural abundance. This review provides a clear, in-depth, and comprehensive description of the structure, properties, and characteristics of aluminosilicates, supporting their application as adsorbents and highlighting their diversity and adaptability to different matrices and analytes. Furthermore, the functionalization of these materials is thoroughly addressed, detailing the techniques currently used, exposing the advantages and disadvantages of each approach, and establishing comparisons and evaluations of the performances of various functionalized aluminosilicates in the extraction of heavy metals in aqueous matrices. This work aims not only to comprehensively review numerous studies from recent years but also to identify trends in the study of such materials and inspire future research and applications in the field of contaminant removal using aluminosilicates.

Biosorption of p-chloro meta xylenol (PCMX) by bacterium-encapsulated calcium alginate beads in a novel plug flow process

P-Chloro-Meta-Xylenol (PCMX) is a widely used disinfectant. In the current pandemic scenario, its consumption has increased largely, and as a result, wastewater is loaded heavily with PCMX as a contaminant. Remediation of this ecologically toxic phenolic compound is therefore a burning issue. This study proposes an eco-friendly biosorption-based remediation technique to remove PCMX. A novel isolated phenol-resistant gram-negative bacterium, Pandoraea sp. strain BT102, is first encapsulated in biopolymeric calcium alginate beads. These beads are packed in a long adsorption tube and the contaminated water was passed through this packed tube resembling a plug flow reactor. This unique plug-flow set-up is capable of reducing PCMX concentration from 100 mg L^-1 to 2.85 μg L^-1 within 4 h using only 30 g of adsorbent, resulting in 99.99% removal efficiency. Adsorption isotherms and kinetics are studied using batch experimental data. A PCMX loading capacity of the encapsulated calcium alginate beads is found to be 961.7 mg g^-1, and the Freundlich isotherm results suggested the phenomenon of cooperative adsorption. A good agreement of the pseudo-second-order kinetic model along with the intra-particle diffusion model suggests a multilayer diffusion-controlled adsorption process. Biosorption of PCMX by the bacterium-modified beads was confirmed by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and Fourier-Transform Infrared spectroscopy (FT-IR) analyses. The application of multivariate model-based Response Surface Methodology (RSM) reveals flow rate to be the most important factor controlling the rate of bioremediation.

Photocatalytic removal of 2-chlorophenol from water by using waste eggshell-derived calcium ferrite

A new approach to recycling low-value eggshell food waste was to produce a CaFe₂O₄ semiconductor with a narrow band gap (E_g = 2.81 eV) via hydrothermal treatments of powdered eggshell suspended in aqueous ferric salt (Fe³⁺) solutions at varying Fe loadings. It was possible to obtain a single phase of CaFe₂O₄ without any Ca(OH)₂ and CaO impurities using an optimal Fe loading (30 wt% of Fe³⁺ by eggshell weight). The CaFe₂O₄ material was used as a photocatalyst for the breakdown of 2-chlorophenol (2-CP, a herbicide model chemical) as a pollutant in water. The CaFe₂O₄ with a Fe loading of 7.1 wt% exhibited a high 2-CP removal efficiency of 86.1% after 180 min of UV-visible light irradiation. Additionally, the eggshell-derived CaFe₂O₄ photocatalyst can be effectively reused, giving a high removal efficiency of 70.5% after the third cycle, without the requirement of regeneration processes (washing or re-calcination). Although radical trapping experiments confirmed that hydroxyl radicals were generated in the photocatalytic reactions, photogenerated holes play a significant role in the high 2-CP degradation efficiencies. The performance of the bioderived CaFe₂O₄ photocatalysts in the removal of pesticides from water demonstrated the benefits of resource recycling in the area of materials science and in environmental remediation and protection.

Advancements in Clay Materials for Trace Level Determination and Remediation of Phenols from Wastewater: A Review

The wide spread of phenols and their toxicity in the environment pose a severe threat to the existence and sustainability of living organisms. Rapid detection of these pollutants in wastewaters has attracted the attention of researchers from various fields of environmental science and engineering. Discoveries regarding materials and method developments are deemed necessary for the effective detection and remediation of wastewater. Although various advanced materials such as organic and inorganic materials have been developed, secondary pollution due to material leaching has become a major concern. Therefore, a natural-based material is preferable. Clay is one of the potential natural-based sorbents for the detection and remediation of phenols. It has a high porosity and polarity, good mechanical strength, moisture resistance, chemical and thermal stability, and cation exchange capacity, which will benefit the detection and adsorptive removal of phenols. Several attempts have been made to improve the capabilities of natural clay as sorbent. This manuscript will discuss the potential of clays as sorbents for the remediation of phenols. The activation, modification, and application of clays have been discussed. The achievements, challenges, and concluding remarks were provided.

Enhanced adsorption of aqueous chlorinated aromatic compounds by nitrogen auto-doped biochar produced through pyrolysis of rubber-seed shell

The adsorption of chlorinated aromatic compounds (CACs) on pristine biochar was often limited. Surface modification can greatly improve the adsorption capacity of biochar. In this work, by pyrolysis activation of rubber-seed shell wastes, nitrogen auto-doped biochar (RSS-NBC) was synthesized and used for purifying CACs-containing wastewater. Systematic characterization results showed that after proper treatment, the as-prepared RSS-NBC had high specific surface area, abundant surface oxygen- and nitrogen-containing functional groups, and nano-scale pore structure. Batch adsorption experiments were conducted with using three typical CACs probing pollutants, i.e. 1,2-dichlorobenzene (1,2-DCB), 2,4-dichlorophenol (2,4-DCP) and 2,4-dichlorobenzoic acid (2,4-DCBA). The adsorption experiments results showed that the maximum adsorption amounts of 1, 2-DCB, 2,4-DCP, and 2,4-DCBA could reach 2284, 1921, and 1142 mg/g at 298.15 K. Moreover, 90% of the equilibrium adsorption amount can be reached within 0.5 h. The adsorption kinetic results showed that the adsorption processes of the three CACs followed the pseudo-second-order rate model and were dominated by chemisorption. Also, the adsorption isotherms of 1, 2-DCB and 2, 4-DCP belonged to the Freundlich model and were valid for multilayer adsorption, while the adsorption of 2,4-DCBA followed Langmuir model and single-layer adsorption. The thermodynamics data indicated that the spontaneous adsorption process of 1, 2-DCB and 2, 4-DCP was endothermic while that of 2,4-DCBA was exothermic. After 5 cycles of adsorption-regeneration, the removal efficiency of RSS-NBC particles still remained more than 80% for the three typical CACs, indicating that it could be reused as an effective and retrievable adsorbent in the treatment of CACs-containing effluents.

Novel magnetic nickel ferrite nanoparticles modified with poly(aniline-co-o-toluidine) for the removal of hazardous 2,4-dichlorophenol pollutant from aqueous solutions

Chlorinated organic and phenolic compounds are still purely studied by many researchers because of their severe damage to the aquatic environment and their carcinogenic effect on many living organisms. Therefore, there is a great interest in removing these environmental pollutants from aqueous mediums by easy and inexpensive methods. Herein, novel nickel ferrite (NiFe2O4) nano composite modified with poly(aniline-co-o-toluidine) (PAOT) is prepared, characterized, and used for the removal of 2,4-dichlorophenol (2,4-DCP) as an organic chlorinated environmental pollutant. The morphological properties of the composite are characterized by Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and Brunauer-Emmett-Teller (BET) methods. The prepared composite is tested for the removal of the hazardous dichlorophenol pollutant from aqueous solutions. Under optimized conditions and with effective control of parameters including, contact time, pH of the test solution, adsorbent dose, and temperature, over 83% of the pollutant is adsorbed and removed. The adsorption capacity is 162 mg g-1. Adsorption kinetics, adsorption isotherm and some physicochemical parameters of the reaction are evaluated. The Redlich-Peterson isothermal model is the appropriate model for describing the adsorption process. These results indicate that NiFe2O4/PAOT nanocomposites are promising adsorbents for the removal of persistent organic pollutants (e.g., DCP) from aqueous solutions. The results also reveal that modification of NiFe2O4 particles with poly(aniline-co-o-toluidine) (PAOT) significantly enhances the adsorption capacity of the adsorbent. This is probably due to the electrostatic attraction and non-covalent interactions (e.g. π-π) between the aromatic rings in both dichlorophenol and poly(aniline-co-o-toluidine) copolymer. Advantages offered by using NiFe2O4/PAOT nanocomposites are the high stability, reasonable efficiency, reusability for at least five adsorption-desorption cycles and the ability to remove the adsorbent from aqueous solutions for reuse using an external magnetic field.

Austenitic Stainless Steel as a Catalyst Material for Photo-Fenton Degradation of Organic Dyes

In this paper, a typical austenitic stainless steel was used as a catalyst in the visible photo-Fenton degradation process of two model dyes, methylene blue and methylorange, in the presence of hydrogen peroxide and potassium persulfate as free radical-generating species. The concentration intervals for both peroxide and persulfate were in the range of 333–1667 μg/L. Very high photodecoloration efficiencies have been achieved using peroxide (>93%), while moderate ones have been achieved using persulfate (>75%) at a pH value of 6.5. For methylene blue, the maximum mineralization yield of 74.5% was achieved using 1665 μg/L of hydrogen peroxide, while methylorange was better mineralized using 999 μg/L of persulfate. The photodegradation of the dye occurred in two distinct steps, which were successfully modeled by the Langmuir–Hinshelwood pseudo-first-order kinetic model. Reaction rate constants k between 0.1 and 4.05 h−1 were observed, comparable to those presented in the reference literature at lower pH values and higher concentrations of total iron from the aqueous media.

S-doped NiFe-based catalyst for fast degradation of methylene blue by heterogeneous photo-Fenton reaction

S-doped NiFe-based particles were prepared by a solvothermal method and used to degrade methylene blue (MB) aqueous solutions with visible light in a heterogeneous Fenton reaction. The obtained solid samples were characterized by XRD, SEM, TEM, and XPS. It was found that 0.2 g L-1 NiFe2S4 can degrade 99.8% MB solution within 6 min in the presence of 5 mM H2O2 and natural pH. The recycle experiments results indicate that the NiFe2S4 catalyst possessed better stability than NiFe2O4. Furthermore, NiFe2S4 particles can be easily separated from contaminant solution by using a magnet due to their excellent ferromagnetism. COD analysis experiments indicated that the COD removal rate of NiFe2S4 is 73.1% in 30 min. A possible mechanism was proposed, and the degradation products were measured by LC-MS.

Natural clay minerals and fly ash waste as green catalysts for heterogeneous photo-Fenton reactions

This review highlights recent advances in the use of natural clay minerals and fly ash waste as efficient catalysts for the heterogeneous photo-Fenton degradation of emerging contaminants.

Geochemical and Physicochemical Characteristics of Clay Materials from Congo with Photocatalytic Activity on 4-Nitrophenol in Aqueous Solutions

This study investigated the geochemical and physicochemical characteristics of natural clay collected in the Democratic Republic of Congo. The optical properties of the sample collected in Golf (GOL) were tested in the removal of 4-nitrophenol in aqueous solution. The geochemical analysis depicted that all the samples are plotted within the shale quadrant. Furthermore, the Chemical Index of Alteration (CIA) indicated that the samples are extremely weathered. The particle size distribution ranged from 0.41 to 418.6 μm, while the pore diameters for all the samples were under 100 Å. A flake-like surface morphology was observed in all the samples. SiO₂, Al₂O₃, Fe₂O₃, K₂O, and TiO₂ were the major chemical compounds found in all the samples, while the XRD analysis showed the presence of quartz, kaolinite, magnetite, and illite. The presence of metal oxides (i.e., TiO₂ and Fe₂O₃) indicated that these natural clays can be used for photocatalytic oxidation of pollutants. The sample collected in Katuba (KAT) displayed the higher reflectance percentages for the selected wavelengths except at 200 nm. Interestingly, the GOL sample exhibited lower energy band gaps (2.68 and 3.94 eV) necessary for photocatalysis. The untreated GOL clay sample removed 99.13% of 4-nitrophenol from aqueous solution through the photodegradation process. The usage of the untreated GOL clay could be a cost-effective solution in the removal of 4-nitrophenol in wastewater.

A strategy for the efficient removal of chlorophenols in petrochemical wastewater by organophilic and aminated silica@alginate microbeads: Taguchi optimization and isotherm modeling based on partition coefficient

Through in situ encapsulation of cetyltrimethylammonium bromide (CTAB) and urea-functionalized SiO₂ nanoparticles in alginate hydrogel, two types of new functionalized microbeads, CTAB-SiO₂@alginate (organophilic) and urea-SiO₂@alginate (aminated), were produced. Their adsorption behavior toward multiple chlorophenols (CPs: e.g., 4-chlorophenol (MCP), 2,4-dichlorophenol (DCP), and 2,4,6-trichlorophenol (TCP)) in petrochemical wastewater was assessed with the aid of Taguchi's L9 orthogonal array at three levels. In terms of the partition coefficient (PC: μmol/g·μM (or L/g)), the use of three-parameter models (hybrid Langmuir-Freundlich and Redlich-Peterson) yielded the best fit (R² ≈ 1). Furthermore, the performance evaluation in terms of PC metric indicated that CTAB-SiO₂@alginate (7.85 L/g) was better to treat total CPs than urea-modified SiO₂@alginate microbeads (3.83 L/g). The enhanced performance of the former reflects the significant contribution of CTAB functionality (sp² carbon tail and quaternary amine (N⁺) cationic head sites) for accelerating uptake of molecular (or suspended) and ionizable CPs molecules (e.g., with the aid of salting-out effect at a high initial CPs concentration and salinity) via hydrophobic/electrostatic interactions. The high performance of the CTAB-SiO₂@alginate was demonstrated against petroleum hydrocarbons, CPs, and phenol contaminants using real petrochemical wastewater (up to three reusable cycles).

Fabrication of an ultra-sensitive para-nitrophenol sensor based on facile Zn-doped Er2O3 nanocomposites via an electrochemical approach

In this study, a semiconductor-doped nanocomposite material (Zn-doped Er2O3 nano-composites) was prepared via a single-step wet-chemical technique at alkaline pH. Fourier-transform infrared spectroscopy (FT-IR), UV/Vis spectroscopy, photoluminescence spectroscopy (PL), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (XEDS), and X-ray powder diffractometry (XRD) were applied to determine the structural and morphological properties of the Zn-doped Er2O3 nanocomposite. A thin layer of aggregated Zn-doped Er2O3 nanocomposite was fabricated on the flat surface of a glassy carbon electrode (GCE) with 5% ethanolic Nafion as conducting coating binder for the development of a selective and sensitive p-nitrophenol (para-NP) capturing electrochemical probe for environmental remediation. After the fabrication of the sensor, a novel current-potential (I-V) electrochemical approach was applied to determine its selectivity and sensitivity together with all the necessary analytical parameters against para-NP. Moreover, the calibration plot was found to be linear with the linear dynamic range (LDR) of para-NP concentration. The limit of detection (LOD) at a signal-to-noise ratio of 3 (S/N ∼ 3) and sensitivity were also calculated to be 0.033 ± 0.002 pM and 28.481 × 10-2 μA μM-1 cm-2, respectively, based on the gradient of the calibration plot, and the limit of quantification (LOQ) was determined to be 0.11 ± 0.02 pM. This work demonstrates a well-known approach for the first time that can be used for the development of efficient electrochemical sensors. These sensors based on semiconductor doped nanomaterials embedded onto the GCE for the detection of toxic chemicals in an aqueous system as an environmental remediation. It can be further applied for the analysis of real environmental samples and in the healthcare field.

Preparation of Magnetic Porous Aromatic Framework for Rapid and Efficient Removal of Organic Pollutants from Water

In this study, efforts were made to prepare a porous aromatic framework (PAF) with build-in magnetic nanoparticles (Fe₃O₄-PAF) for use as an efficient adsorbent for the removal of organic pollutants from water. The Fe₃O₄-PAF showed good handleability and could be recovered easily by magnetic separation. As a proof of concept, the adsorption properties of Fe₃O₄-PAF were investigated to remove 2,4-dichlorophenol (2,4-DCP) and bisphenol A (BPA) from water. The Fe₃O₄-PAF showed a fast adsorption rate, high adsorption efficiency and high adsorption capacities. It adsorbed 2,4-DCP (0.1 mmol L^-1) and BPA (0.1 mmol L^-1) with pseudo-second-order rate constant (k₂) of 2.1 and 3.54 g mg^-1 min^-1, respectively. According to the Langmuir isotherm model, the maximum adsorption capacities of 2,4-DCP and BPA onto Fe₃O₄-PAF were calculated to be 234.74 and 233.65 mg g^-1, respectively. The Fe₃O₄-PAF also featured good tolerance to harsh conditions, facilitating its application in a real water environment. It could be regenerated easily and reused multiple times without obvious loss of efficiency. In summary, this study provides a general and effective way to improve the handleability of PAFs and expands the practical application of PAF-based materials.

Heterogeneous photo-Fenton process using iron-modified regional clays as catalysts: photonic and quantum efficiencies

A regional raw clay was used as the starting material to prepare iron-pillared clays with different iron contents. The catalytic activity of these materials was tested in the heterogeneous photo-Fenton process, applied to the degradation of 2-chlorophenol chosen as the model pollutant. Different catalyst loads between 0.2 and 1.0 g L^-1 and pH values between 3.0 and 7.0 were studied. The local volumetric rate of photon absorption (LVRPA) in the reactor was evaluated solving the radiative transfer equation applying the discrete ordinate method and using the optical properties of the catalyst suspensions. The photonic and quantum efficiencies of the 2-chlorophenol degradation depend on both the catalyst load and the iron content of the catalyst. The higher values for these parameters, 0.080 mol Einstein^-1 and 0.152 mol Einstein^-1, respectively, were obtained with 1.0 g L^-1 of the catalyst with the higher iron content (17.6%). For the mineralization process, photonic and quantum efficiencies depend mainly on the catalyst load. Therefore, it was possible to employ a natural and cheap resource from the region to obtain pillared clay-based catalysts to degrade organic pollutants in water.

One-step preparation of polyimide-inlaid amine-rich porous organic block copolymer for efficient removal of chlorophenols from aqueous solution

A novel polyimide-inlaid amine-rich porous organic block copolymer (PI-b-ARPOP) was prepared via one-step polymerization by using different molar ratios of melamine (MA)/terephthalaldehyde (TA)/pyromellitic dianhydride (PMDA), at molar ratios of 4/3/1, 4/2/2 and 4/1/3. The copolymer contained both aminal groups belonging to ARPOP and imide groups belonging to PI, and the bonding styles of the monomers and growth orientations of the polymeric chains were diversiform, forming an excellent porous structure. Notably, MA/TA/PMDA (4/2/2) had a surface area and pore volume of 487.27 m²/g and 1.169 cm³/g, respectively. The adsorption performance of the materials towards 2,4-dichlorophenol (2,4-DCP) in ultra-pure water was systematically studied. The pH value of 7 was optimal in aqueous solution. Na⁺ and Cl^- ions did not negatively affect the adsorption process, while humic acid (HA) slightly decreased the capacity. The equilibrium time was 40 sec, and the maximum adsorption capacity reached 282.49 mg/g at 298 K. The removal process was endothermic and spontaneous, and the copolymer could maintain its porous structure and consistent performance after regeneration by treatment with alkali. Moreover, to further assess the practical applicability of the material, the adsorption performance towards 2,4-DCP in river water was also investigated. This paper demonstrated that the PI-b-ARPOP can be an efficient and practical adsorbent to remove chlorophenols from aqueous solution.

MnO2-loaded microorganism-derived carbon for U(VI) adsorption from aqueous solution

A low-cost industrial microorganism, Saccharomyces cerevisiae, was employed as a precursor to synthesize carbon/MnO₂ composites (MMCs) via an oxidation-reduction reaction and one-step carbonization method for U(VI) adsorption. Scanning electron microscopy and nitrogen adsorption measurement indicated that the microorganism's carbonization could form surface porous structure and increase the specific surface area. Batch experiments showed that the maximum U(VI) adsorption capacity of MMCs reached 207 mg g^-1 at [U(VI)]_initial = 25 mg L^-1 and pH_initial = 4.5. The obtained thermodynamic and kinetic parameters suggested that the process is endothermic, spontaneous, and chemisorption. FTIR and X-ray photoelectron spectroscopy demonstrated that the surface hydroxyl groups of composites might be the reactive adsorption sites for U(VI). Additionally, 0.5 mol L^-1 HNO₃ solution could desorb ~ 95% uranium from U(VI)-loaded MMCs, and materials exhibited good regenerated availability. This study suggests that MMCs can be a potential adsorbent for U(VI) preconcentration and removal from radioactive wastewater.

Improved waste-sourced biocomposite for simultaneous removal of crude oil and heavy metals from synthetic and real oilfield-produced water

Oil- and gas-produced water (PW) which contains various pollutants is an enormous threat to the environment. In this study, a novel low-cost bio-adsorbent was prepared from shrimp shell and acid-activated montmorillonite. The results of FT-IR spectroscopy, energy dispersive X-ray (EDX) analysis, and SEM-EDX technique indicated that the chitosan-activated montmorillonite (CTS-A-MMT) was prepared successfully. The synthesized CTS-A-MMT was applied to remove simultaneously five cationic and anionic metal species and crude oil from synthetic and real oilfield PW. The adsorption data indicated that crude oil and all studied metals (except As) were adsorbed to CTS-A-MMT in a monolayer model (best fitted by Langmuir model), while As adsorption fits well with Freundlich model. Kinetic models' evaluation demonstrated that the adsorption kinetics of metals on CTS-A-MMT are initially controlled by the chemical reaction (film diffusion) followed by intra-particle diffusion. Application of the prepared CTS-A-MMT in real oilfield PW indicated removal efficiency of 65 to 93% for metals and 87% for crude oil in simultaneous removal experiments. Presence of additional ions in PW decreased the removal of studied metals and crude oil considerably; however, the concentration of the investigated pollutants in treated PW is less than the ocean discharge criteria. It is concluded that the prepared CTS-A-MMT composite is a low-cost and effective adsorbent for treating wastewater contaminated with crude oil and heavy metals (i.e., PW).

Sensitive 3-chlorophenol sensor development based on facile Er2O3/CuO nanomaterials for environmental safety

Low-dimensional Er₂O₃/CuO nanomaterials were synthesized by wet-chemical process and totally characterized with various conventional methods. The electrochemical approach could be a pioneer development in selective 3-CP sensor development using doped nano-structural materials by an electrochemical method for the various phenolic sensor applications for environmental safety in broad scales.