Elaboration of alumina-based materials by solution combustion synthesis: A review

Solution combustion synthesis: the relevant metrics for producing advanced and nanostructured photocatalysts

The current developments and progress in energy and environment-related areas pay special attention to the fabrication of advanced nanomaterials via green and sustainable paths to accomplish chemical circularity. The design and preparation methods of photocatalysts play a prime role in determining the structural, surface characteristics and optoelectronic properties of the final products. The solution combustion synthesis (SCS) technique is a relatively novel, cost-effective, and efficient method for the bulk production of nanostructured materials. SCS-fabricated metal oxides are of great technological importance in photocatalytic, environmental and energy applications. To date, the SCS route has been employed to produce a large variety of solid materials such as metals, sulfides, carbides, nitrides and single or complex metal oxides. This review intends to provide a holistic perspective of the different steps involved in the chemistry of SCS of advanced photocatalysts, and pursues several SCS metrics that influence their photocatalytic performances to establish a feasible approach to design advanced photocatalysts. The study highlights the fundamentals of SCS and the importance of various combustion parameters in the characteristics of the fabricated photocatalysts. Consequently, this work deals with the design of a concise framework to link the fine adjustment of SCS parameters for the development of efficient metal oxide photocatalysts for energy and environmental applications.

Reversible Mn valence state switching in submicron α-Al2O3:Mn by soft X-rays and blue light - a potential pathway towards multilevel optical data storage

The generation of Mn⁴⁺ in α-Al₂O₃:Mn³⁺ by soft X-ray exposure is demonstrated with a large dynamic range of the X-ray generated Mn⁴⁺ luminescence signal, indicating the potential use of α-Al₂O₃:Mn³⁺ for multilevel optical data storage. Samples with a range of Mn concentrations (0.05, 0.1, 0.2, 0.4, 0.6 and 1.2 atom%) were prepared via a facile combustion method and the sample with 0.4 atom% was found to display the highest luminescence intensity. The stored information can be read out via the R-lines (²E → ⁴A₂) under ∼470 nm (⁴A₂ → ⁴T₂), or ∼630 nm (⁴A₂ → ²T₁) excitation with the latter being preferred since photobleaching is minimized. Interestingly, the Mn⁴⁺ valence state can be fully switched back to Mn³⁺ by blue light exposure (e.g., 462 nm laser diode). The stored information could be repeatedly written and erased, showing no significant deterioration over five consecutive cycles, with less than 5% uncertainty.

Solution synthesis and dielectric properties of alumina thin films: understanding the role of the organic additive in film formation

Alumina thin films are synthesized by combustion synthesis of mixtures of aluminium nitrate (ALN) and methylcarbazate (MCZ). The interdependence of the ratio of oxidizer and reducing agent on composition, microstructure and electronic properties of the resulting oxide layers is investigated. The dielectric and insulating behaviour is improved by addition of different amounts of MCZ (MCZ : ALN = 0.67 or 2.5). In this way films (thickness ∼140 nm) with a dielectric constant κ of 9.7 and a dielectric loss tan δ below 0.015 can be achieved. Medium concentrations of MCZ (MCZ : ALN = 1.0 or 1.5) lead to films with lower performance, though. Our studies indicate two opposing effects of the organic additive. Removal of organic residues during film formation as combustion gases is potentially detrimental. Larger amounts of MCZ, however, cause condensation reactions in the precusor mixture, which improve the microstructure. The porosity of the films can be sucessfully analyzed by positron annihilation liftetime studies. In this way the impact of the organic ligand sphere on the resulting microstructure can be quantified. Samples prepared from ALN alone exhibit mesopores and also larger micropores. In contrast, the formation of mesopores can be inhibited by addition of MCZ.

Binary Oxides Prepared by Microwave-Assisted Solution Combustion: Synthesis, Characterization and Catalytic Activity

Three different alumina-based Ni, Cu, Co oxide catalysts with metal loading of 10 wt %, and labeled 10Ni–Al, 10Co–Al and 10Cu–Al, were prepared by microwave-assisted solution combustion. Their morphological, structural and surface properties were deeply investigated by complementary physico-chemical techniques. Finally, the three materials were tested in CO oxidation used as test reaction for comparing their catalytic performance. The 10Cu–Al catalyst was constituted of copper oxide phase, while the 10Ni–Al and 10Co–Al catalysts showed the presence of “spinels” phases on the surface. The well-crystallized copper oxide phase in the 10Cu–Al catalyst, obtained by microwave synthesis, allowed for obtaining very high catalytic activity. With a CO conversion of 100% at 225 °C, the copper containing catalyst showed a much higher activity than that usually measured for catalytic materials of similar composition, thus representing a promising alternative for oxidation processes.