Structural integrity of collagen and elastin in SynerGraft® decellularized-cryopreserved human heart valves

Functional acellular matrix for tissue repair

In view of their low immunogenicity, biomimetic internal environment, tissue- and organ-like physicochemical properties, and functionalization potential, decellularized extracellular matrix (dECM) materials attract considerable attention and are widely used in tissue engineering. This review describes the composition of extracellular matrices and their role in stem-cell differentiation, discusses the advantages and disadvantages of existing decellularization techniques, and presents methods for the functionalization and characterization of decellularized scaffolds. In addition, we discuss progress in the use of dECMs for cartilage, skin, nerve, and muscle repair and the transplantation or regeneration of different whole organs (e.g., kidneys, liver, uterus, lungs, and heart), summarize the shortcomings of using dECMs for tissue and organ repair after refunctionalization, and examine the corresponding future prospects. Thus, the present review helps to further systematize the application of functionalized dECMs in tissue/organ transplantation and keep researchers up to date on recent progress in dECM usage.

Optical coherence tomography and multiphoton microscopy offer new options for the quantification of fibrotic aortic valve disease in ApoE-/- mice

Aortic valve sclerosis is characterized as the thickening of the aortic valve without obstruction of the left ventricular outflow. It has a prevalence of 30% in people over 65 years old. Aortic valve sclerosis represents a cardiovascular risk marker because it may progress to moderate or severe aortic valve stenosis. Thus, the early recognition and management of aortic valve sclerosis are of cardinal importance. We examined the aortic valve geometry and structure from healthy C57Bl6 wild type and age-matched hyperlipidemic ApoE-/- mice with aortic valve sclerosis using optical coherence tomography (OCT) and multiphoton microscopy (MPM) and compared results with histological analyses. Early fibrotic thickening, especially in the tip region of the native aortic valve leaflets from the ApoE-/- mice, was detectable in a precise spatial resolution using OCT. Evaluation of the second harmonic generation signal using MPM demonstrated that collagen content decreased in all aortic valve leaflet regions in the ApoE-/- mice. Lipid droplets and cholesterol crystals were detected using coherent anti-Stokes Raman scattering in the tissue from the ApoE-/- mice. Here, we demonstrated that OCT and MPM, which are fast and precise contactless imaging approaches, are suitable for defining early morphological and structural alterations of sclerotic murine aortic valves.

Rapid porcine corneal decellularization through the use of sodium N-lauroyl glutamate and supernuclease

Corneal decellularization represents a promising alternative source of human donor with global shortage. Multiple methods have been developed for the preparation of decellularized porcine corneal stroma. However, most strategies relied on long-time treatment to facilitate the entry of detergents or nucleases, which may cause irreversible ultrastructural damage. Here, we developed a rapid decellularization method for porcine corneal stroma through the combined mild detergent sodium N-lauroyl glutamate (SLG) and supernuclease. Compared with traditional methods, the novel decellularization method allowed the efficient removal of xenoantigen DNA within 3 h, while retaining the ultrastructure, transparency, and mechanical properties of porcine corneas. When transplanted in rabbit model for 1 month, the decellularized porcine corneal grafts presented favorable transparency and biocompatibility without immune rejection. Therefore, the combined use of detergent SLG and supernuclease may serve as a promising method for the clinical use of decellularized porcine cornea.

The role of biomaterials in stem cell-based regenerative medicine

Stem cell therapy is a promising alternative approach to the treatment of a number of incurable degenerative diseases. However, low cell retention and survival after transplantation limit the therapeutic efficacy of stem cells for clinical translational applications. The utilization of biomaterials has been progressively successful in controlling the fate of transplanted cells by imitating the cellular microenvironment for optimal tissue repair and regeneration. This review mainly focuses on the engineered microenvironments with synthetic biomaterials in modification of stem cell behaviors. Moreover, the possible advancements in translational therapy by using biomaterials with stem cells are prospected and the challenges of the current restriction in clinical applications are highlighted.

Scaffolding Strategies for Tissue Engineering and Regenerative Medicine Applications

During the past two decades, tissue engineering and the regenerative medicine field have invested in the regeneration and reconstruction of pathologically altered tissues, such as cartilage, bone, skin, heart valves, nerves and tendons, and many others. The 3D structured scaffolds and hydrogels alone or combined with bioactive molecules or genes and cells are able to guide the development of functional engineered tissues, and provide mechanical support during in vivo implantation. Naturally derived and synthetic polymers, bioresorbable inorganic materials, and respective hybrids, and decellularized tissue have been considered as scaffolding biomaterials, owing to their boosted structural, mechanical, and biological properties. A diversity of biomaterials, current treatment strategies, and emergent technologies used for 3D scaffolds and hydrogel processing, and the tissue-specific considerations for scaffolding for Tissue engineering (TE) purposes are herein highlighted and discussed in depth. The newest procedures focusing on the 3D behavior and multi-cellular interactions of native tissues for further use for in vitro model processing are also outlined. Completed and ongoing preclinical research trials for TE applications using scaffolds and hydrogels, challenges, and future prospects of research in the regenerative medicine field are also presented.

In Vivo Response of Acellular Porcine Pericardial for Tissue Engineered Transcatheter Aortic Valves

Current heart valve prostheses have limitations that include durability, inability to grow in pediatric patients, and lifelong anticoagulation. Transcatheter aortic valve replacements are minimally invasive procedures, and therefore have emerged as an alternative to traditional valve prostheses. In this experiment, the regenerative capacity of potential tissue engineered transcatheter valve scaffolds (1) acellular porcine pericardium and (2) mesenchymal stem cell-seeded acellular porcine pericardium were compared to native porcine aortic valve cusps in a rat subcutaneous model for up to 8 weeks. Immunohistochemistry, extracellular matrix evaluation, and tissue biomechanics were evaluated on the explanted tissue. Acellular valve scaffolds expressed CD163, CD31, alpha smooth muscle actin, and vimentin at each time point indicating host cell recellularization; however, MSC-seeded tissue showed greater recellularization. Inflammatory cells were observed with CD3 biomarker in native porcine pericardial tissue throughout the study. No inflammation was observed in either acellular or MSC-seeded scaffolds. There was no mechanical advantage observed in MSC-seeded tissue; however after the first week post-explant, there was a decrease in mechanical properties in all groups (p < 0.05). MSC-seeded and acellular porcine pericardium expressed decreased inflammatory response and better host-cell recellularization compared to the native porcine aortic valve cusps.

Preservation strategies for decellularized pericardial scaffolds for off-the-shelf availability

Decellularized biological scaffolds hold great promise in cardiovascular surgery. In order to ensure off-the-shelf availability, routine use of decellularized scaffolds requires tissue banking. In this study, the suitability of cryopreservation, vitrification and freeze-drying for the preservation of decellularized bovine pericardial (DBP) scaffolds was evaluated. Cryopreservation was conducted using 10% DMSO and slow-rate freezing. Vitrification was performed using vitrification solution (VS83) and rapid cooling. Freeze-drying was done using a programmable freeze-dryer and sucrose as lyoprotectant. The impact of the preservation methods on the DBP extracellular matrix structure, integrity and composition was assessed using histology, biomechanical testing, spectroscopic and thermal analysis, and biochemistry. In addition, the cytocompatibility of the preserved scaffolds was also assessed. All preservation methods were found to be suitable to preserve the extracellular matrix structure and its components, with no apparent signs of collagen deterioration or denaturation, or loss of elastin and glycosaminoglycans. Biomechanical testing, however, showed that the cryopreserved DBP displayed a loss of extensibility compared to vitrified or freeze-dried scaffolds, which both displayed similar biomechanical behavior compared to non-preserved control scaffolds. In conclusion, cryopreservation altered the biomechanical behavior of the DBP scaffolds, which might lead to graft dysfunction in vivo. In contrast to cryopreservation and vitrification, freeze-drying is performed with non-toxic protective agents and does not require storage at ultra-low temperatures, thus allowing for a cost-effective and easy storage and transport. Due to these advantages, freeze-drying is a preferable method for the preservation of decellularized pericardium. STATEMENT OF SIGNIFICANCE: Clinical use of DBP scaffolds for surgical reconstructions or substitutions requires development of a preservation technology that does not alter scaffold properties during long-term storage. Conclusive investigation on adverse impacts of the preservation methods on DBP matrix integrity is still missing. This work is aiming to close this gap by studying three potential preservation technologies, cryopreservation, vitrification and freeze-drying, in order to achieve the off-the-shelf availability of DBP patches for clinical application. Furthermore, it provides novel insights for dry-preservation of decellularized xenogeneic scaffolds that can be used in the routine clinical cardiovascular practice, allowing the surgeon the opportunity to choose an ideal implant matching with the needs of each patient.

Tissue-Engineered Grafts from Human Decellularized Extracellular Matrices: A Systematic Review and Future Perspectives

Tissue engineering and regenerative medicine involve many different artificial and biologic materials, frequently integrated in composite scaffolds, which can be repopulated with various cell types. One of the most promising scaffolds is decellularized allogeneic extracellular matrix (ECM) then recellularized by autologous or stem cells, in order to develop fully personalized clinical approaches. Decellularization protocols have to efficiently remove immunogenic cellular materials, maintaining the nonimmunogenic ECM, which is endowed with specific inductive/differentiating actions due to its architecture and bioactive factors. In the present paper, we review the available literature about the development of grafts from decellularized human tissues/organs. Human tissues may be obtained not only from surgery but also from cadavers, suggesting possible development of Human Tissue BioBanks from body donation programs. Many human tissues/organs have been decellularized for tissue engineering purposes, such as cartilage, bone, skeletal muscle, tendons, adipose tissue, heart, vessels, lung, dental pulp, intestine, liver, pancreas, kidney, gonads, uterus, childbirth products, cornea, and peripheral nerves. In vitro recellularizations have been reported with various cell types and procedures (seeding, injection, and perfusion). Conversely, studies about in vivo behaviour are poorly represented. Actually, the future challenge will be the development of human grafts to be implanted fully restored in all their structural/functional aspects.

Functional tissue-engineered microtissue derived from cartilage extracellular matrix for articular cartilage regeneration

We developed a promising cell carrier prepared from articular cartilage slices, designated cartilage extracellular matrix (ECM)-derived particles (CEDPs), through processes involving physical pulverization, size screening, and chemical decellularization. Rabbit articular chondrocytes (ACs) or adipose-derived stem cells (ASCs) rapidly attached to the surface of the CEDPs and proliferated with high cell viability under microgravity (MG) condition in a rotary cell culture system (RCCS) or static condition. Gene profiling results demonstrated that ACs expanded on CEDPs exhibited significantly enhanced chondrogenic phenotypes compared with monolayer culture, and that ASCs differentiated into a chondrogenic phenotype without the use of exogenous growth factors. Moreover, MG culture conditions in a RCCS bioreactor were superior to static culture conditions in terms of maintaining the chondrogenic phenotype of ACs and inducing ACS chondrogenesis. With prolonged expansion, functional microtissue aggregates of AC- or ASC-laden CEDPs were formed. Further, AC- or ASC-based microtissues were directly implanted in vivo to repair articular osteochondral defects in a rabbit model. Histological results, biomechanical evaluations, and radiographic assessments indicated that AC- and ASC-based microtissues displayed equal levels of superior hyaline cartilage repair, whereas the other two treatment groups, in which osteochondral defects were treated with CEDPs alone or fibrin glue, exhibited primarily fibrous tissue repair. These findings provide an alternative method for cell culture and stem cell differentiation and a promising strategy for constructing tissue-engineered cartilage microtissues for cartilage regeneration.

STATEMENT OF SIGNIFICANCE

Despite the remarkable progress in cartilage tissue engineering, cartilage repair still remains elusive. In the present study, we developed a cell carrier, namely cartilage extracellular matrix-derived particles (CEDPs), for cell proliferation of articular chondrocytes (ACs) and adipose-derived stem cells (ASCs), which improved the maintenance of chondrogenic phenotype of ACs, and induced chondrogenesis of ASCs. Moreover, the functional microtissue aggregates of AC- or ASC-laden CEDPs induced equal levels of superior hyaline cartilage repair in a rabbit model. Therefore, our study demonstrated an alternative method for chondrocyte culture and stem cell differentiation, and a promising strategy for constructing tissue-engineered cartilage microtissues for in vivo articular cartilage repair and regeneration.

Decellularized matrices in regenerative medicine

Of all biologic matrices, decellularized extracellular matrix (dECM) has emerged as a promising tool used either alone or when combined with other biologics in the fields of tissue engineering or regenerative medicine - both preclinically and clinically. dECM provides a native cellular environment that combines its unique composition and architecture. It can be widely obtained from native organs of different species after being decellularized and is entitled to provide necessary cues to cells homing. In this review, the superiority of the macro- and micro-architecture of dECM is described as are methods by which these unique characteristics are being harnessed to aid in the repair and regeneration of organs and tissues. Finally, an overview of the state of research regarding the clinical use of different matrices and the common challenges faced in using dECM are provided, with possible solutions to help translate naturally derived dECM matrices into more robust clinical use.

STATEMENT OF SIGNIFICANCE

Ideal scaffolds mimic nature and provide an environment recognized by cells as proper. Biologically derived matrices can provide biological cues, such as sites for cell adhesion, in addition to the mechanical support provided by synthetic matrices. Decellularized extracellular matrix is the closest scaffold to nature, combining unique micro- and macro-architectural characteristics with an equally unique complex composition. The decellularization process preserves structural integrity, ensuring an intact vasculature. As this multifunctional structure can also induce cell differentiation and maturation, it could become the gold standard for scaffolds.

The choice of cryopreservation method affects immune compatibility of human cardiovascular matrices

Conventional frozen cryopreservation (CFC) is currently the gold standard for cardiovascular allograft preservation. However, inflammation and structural deterioration limit transplant durability. Ice-free cryopreservation (IFC) already demonstrated matrix structure preservation combined with attenuated immune responses. In this study, we aim to explore the mechanisms of this diminished immunogenicity in vitro. First, we characterized factors released by human aortic tissue after CFC and IFC. Secondly, we analyzed co-cultures with human peripheral blood mononuclear cells, purified monocytes, T cells and monocyte-derived macrophages to examine functional immune effects triggered by the tissue or released cues. IFC tissue exhibited significantly lower metabolic activity and release of pro-inflammatory cytokines than CFC tissue, but surprisingly, more active transforming growth factor β. Due to reduced cytokine release by IFC tissue, less monocyte and T cell migration was detected in a chemotaxis system. Moreover, only cues from CFC tissue but not from IFC tissue amplified αCD3 triggered T cell proliferation. In a specifically designed macrophage-tissue assay, we could show that macrophages did not upregulate M1 polarization markers (CD80 or HLA-DR) on either tissue type. In conclusion, IFC selectively modulates tissue characteristics and thereby attenuates immune cell attraction and activation. Therefore, IFC treatment creates improved opportunities for cardiovascular graft preservation.

Decellularization of human donor aortic and pulmonary valved conduits using low concentration sodium dodecyl sulfate

The clinical use of decellularized cardiac valve allografts is increasing. Long‐term data will be required to determine whether they outperform conventional cryopreserved allografts. Valves decellularized using different processes may show varied long‐term outcomes. It is therefore important to understand the effects of specific decellularization technologies on the characteristics of donor heart valves. Human cryopreserved aortic and pulmonary valved conduits were decellularized using hypotonic buffer, 0.1% (w/v) sodium dodecyl sulfate and nuclease digestion. The decellularized tissues were compared to cellular cryopreserved valve tissues using histology, immunohistochemistry, quantitation of total deoxyribose nucleic acid, collagen and glycosaminoglycan content, in vitro cytotoxicity assays, uniaxial tensile testing and subcutaneous implantation in mice. The decellularized tissues showed no histological evidence of cells or cell remnants and >97% deoxyribose nucleic acid removal in all regions (arterial wall, muscle, leaflet and junction). The decellularized tissues retained collagen IV and von Willebrand factor staining with some loss of fibronectin, laminin and chondroitin sulfate staining. There was an absence of major histocompatibility complex Class I staining in decellularized pulmonary valve tissues, with only residual staining in isolated areas of decellularized aortic valve tissues. The collagen content of the tissues was not decreased following decellularization however the glycosaminoglycan content was reduced. Only moderate changes in the maximum load to failure of the tissues were recorded postdecellularization. The decellularized tissues were noncytotoxic in vitro, and were biocompatible in vivo in a mouse subcutaneous implant model. The decellularization process will now be translated into a good manufacturing practices‐compatible process for donor cryopreserved valves with a view to future clinical use. Copyright © 2016 The Authors Tissue Engineering and Regenerative Medicine published by John Wiley & Sons, Ltd.

Cryopreserved human aortic root allografts arterial wall: Structural changes occurring during thawing

Background

The aim of our experimental work was to assess morphological changes of arterial wall that arise during different thawing protocols of a cryopreserved human aortic root allograft (CHARA) arterial wall.

Methods

The experiment was performed on CHARAs. Two thawing protocols were tested: 1, CHARAs were thawed at a room temperature at +23°C; 2, CHARAs were placed directly into a water bath at +37°C.

Microscopic samples preparation

After fixation, all samples were washed in distilled water for 5 min, and dehydrated in a graded ethanol series (70, 85, 95, and 100%) for 5 min at each level. The tissue samples were then immersed in 100% hexamethyldisilazane for 10 minutes and air dried in an exhaust hood at room temperature. Processed samples were mounted on stainless steel stubs, coated with gold.

Results

Thawing protocol 1: All 6 (100%) samples showed loss of the endothelium and damage to the subendothelial layers with randomly dispersed circular defects and micro-fractures without smooth muscle cells contractions in the tunica media.

Thawing protocol 2: All 6 (100%) samples showed loss of endothelium from the luminal surface, longitudinal corrugations in the direction of blood flow caused by smooth muscle cells contractions in the tunica media with frequent fractures in the subendothelial layer

Conclusion

All the samples thawed at the room temperature showed smaller structural damage to the CHARA arterial wall with no smooth muscle cell contraction in tunica media when compared to the samples thawed in a water bath.

Inverted orientation improves decellularization of whole porcine hearts

In structurally heterogeneous organs, such as heart, it is challenging to retain extracellular matrix integrity in the thinnest regions (eg, valves) during perfusion decellularization and completely remove cellular debris from thicker areas. The high inflow rates necessary to maintain physiologic pressure can distend or damage thin tissues, but lower pressures prolong the process and increase the likelihood of contamination. We examined two novel retrograde decellularization methods for porcine hearts: inverting the heart or venting the apex to decrease inflow rate. We measured flow dynamics through the aorta (Ao) and pulmonary artery (PA) at different Ao pressures and assessed the heart's appearance, turbidity of the outflow solutions, and coronary perfusion efficiency. We used rectangle image fitting of decellularized heart images to obtain a heart shape index. Using nonlinear optical microscopy, we determined the microstructure of collagen and elastin fibers of the aortic valve cusps. DNA, glycosaminoglycan, and residual detergent levels were compared. The inverted method was superior to the vented method, as shown by a higher coronary perfusion efficiency, more cell debris outflow, higher collagen and elastin content inside the aortic valve, lower DNA content, and better retention of the heart shape after decellularization. To our knowledge, this is the first study to use flow dynamics in a whole heart throughout the decellularization procedure to provide real-time information about the success of the process and the integrity of the vulnerable regions of the matrix. Heart orientation was important in optimizing decellularization efficiency and maintaining extracellular matrix integrity.

STATEMENT OF SIGNIFICANCE

The use of decellularized tissue as a suitable scaffold for engineered tissue has emerged over the past decade as one of the most promising biofabrication platforms. The decellularization process removes all native cells, leaving the natural biopolymers, extracellular matrix materials and native architecture intact. This manuscript describes heart orientation as important in optimizing decellularization efficiency and maintaining extracellular matrix integrity. To our knowledge, this is the first study to assess flow dynamics in a whole heart throughout the decellularization procedure. Our findings compared to currently published methods demonstrate that continuous complex real-time measurements and analyses are required to produce an optimal scaffold for cardiac regeneration.

Nucleotide Catabolism on the Surface of Aortic Valve Xenografts; Effects of Different Decellularization Strategies

Extracellular nucleotide metabolism controls thrombosis and inflammation and may affect degeneration and calcification of aortic valve prostheses. We evaluated the effect of different decellularization strategies on enzyme activities involved in extracellular nucleotide metabolism. Porcine valves were tested intact or decellularized either by detergent treatment or hypotonic lysis and nuclease digestion. The rates of ATP hydrolysis, AMP hydrolysis, and adenosine deamination were estimated by incubation of aorta or valve leaflet sections with substrates followed by HPLC analysis. We demonstrated relatively high activities of ecto-enzymes on porcine valve as compared to the aortic wall. Hypotonic lysis/nuclease digestion preserved >80 % of ATP and AMP hydrolytic activity but reduced adenosine deamination to <10 %. Detergent decellularization completely removed (<5 %) all these activities. These results demonstrate high intensity of extracellular nucleotide metabolism on valve surface and indicate that various valve decellularization techniques differently affect ecto-enzyme activities that could be important in the development of improved valve prostheses.

Guided tissue regeneration in heart valve replacement: from preclinical research to first-in-human trials

Heart valve tissue-guided regeneration aims to offer a functional and viable alternative to current prosthetic replacements. Not requiring previous cell seeding and conditioning in bioreactors, such exceptional tissue engineering approach is a very fascinating translational regenerative strategy. After in vivo implantation, decellularized heart valve scaffolds drive their same repopulation by recipient's cells for a prospective autologous-like tissue reconstruction, remodeling, and adaptation to the somatic growth of the patient. With such a viability, tissue-guided regenerated conduits can be delivered as off-the-shelf biodevices and possess all the potentialities for a long-lasting resolution of the dramatic inconvenience of heart valve diseases, both in children and in the elderly. A review on preclinical and clinical investigations of this therapeutic concept is provided with evaluation of the issues still to be well deliberated for an effective and safe in-human application.

Engineering patient-specific valves using stem cells generated from skin biopsy specimens

BACKGROUND

Pediatric patients requiring valve replacement will likely require reoperations due to a progressive deterioration of valve durability and limited repair and growth potential. To address these concerns, we sought to generate a biologically active pulmonary valve using patient-specific valvular cells and decellularized human pulmonary valves.

METHODS

We generated induced pluripotent stem cells (iPSCs) by reprogramming skin fibroblast cells. We then differentiated iPSCs to mesenchymal stem cells (iPCSs-MSCs) using culture conditions that favored an epithelial-to-mesenchymal transition. Next, decellularized human pulmonary heart valves were seeded with iPCS-MSCs using a combination of static and dynamic culture conditions and cultured up to 30 days.

RESULTS

The iPSCs-MSCs displayed cluster of differentiation CD105 and CD90 expression exceeding 90% after four passages and could differentiate into osteocytes, chondrocytes, and adipocytes (n = 4). Consistent with an MSC phenotype, iPSCs-MSCs lacked expression of CD45 and CD34. Compared with bone marrow MSCs, iPSCs-MSC proliferated more readily by twofold but maintained a gene expression profile exceeding 80% identical to bone marrow MSCs. In repopulated pulmonary valves compared with decellularized pulmonary valves, immunohistochemistry demonstrated increased cellularity, α-smooth muscle actin expression, and increased presence of extracellular matrix components, such as proteoglycans and glycosaminoglycans, suggesting sustained cell function and maturation.

CONCLUSIONS

Our results demonstrate the feasibility of constructing a biologically active human pulmonary valve using a sustainable and proliferative cell source. The bioactive pulmonary valve is expected to have advantages over existing valvular replacements, which will require further validation.

Combined decellularisation and dehydration improves the mechanical properties of tissue-engineered sinews

Novel sources of replacement sinews are needed to repair damaged tissue after injury. The current methods of repair ultilise autografts, allografts or xenografts, although each method has distinct disadvantages that limit their success. Decellularisation of harvested tissues has been previously investigated for sinew repair with the long-term aim of repopulating the structure with autologous cells. Although this procedure shows promise, the demand for donor scaffolds will always outweigh supply. Here, we report the fabrication of fibrin-based tissue-engineered sinews, which can be decellularised, dehydrated and stored. The sinews may then be rehydrated and repopulated with an autologous cell population. In addition to enabling production of patient-specific implants, interestingly, the process of combined decellularisation, dehydration and rehydration enhanced the mechanical properties of the sinew. The treated sinews exhibited a 2.6-fold increase in maximum load and 8-fold increase in ultimate tensile strength when compared with the control group (p < 0.05 in both cases).

Future prospects for tissue engineered lung transplantation: decellularization and recellularization-based whole lung regeneration

The shortage of donor lungs for transplantation causes a significant number of patient deaths. The availability of laboratory engineered, functional organs would be a major advance in meeting the demand for organs for transplantation. The accumulation of information on biological scaffolds and an increased understanding of stem/progenitor cell behavior has led to the idea of generating transplantable organs by decellularizing an organ and recellularizing using appropriate cells. Recellularized solid organs can perform organ-specific functions for short periods of time, which indicates the potential for the clinical use of engineered solid organs in the future.   The present review provides an overview of progress and recent knowledge about decellularization and recellularization-based approaches for generating tissue engineered lungs. Methods to improve decellularization, maturation of recellularized lung, candidate species for transplantation and future prospects of lung bioengineering are also discussed.

Early systemic cellular immune response in children and young adults receiving decellularized fresh allografts for pulmonary valve replacement

OBJECTIVES

The longevity of homografts is determined by the activation of the recipients' immune system resulting from allogenic antigen exposition. Fresh decellularized pulmonary homografts (DPH) have shown promising early results in pulmonary valve replacement in children and young adults and could potentially avoid significant activation of the immune system, as more than 99% of the donor DNA is removed during the decellularization process. While the humoral immune response to decellularized allografts has been studied, detailed information on the more significant cellular immune response is currently lacking.

METHODS AND RESULTS

Peripheral blood samples were obtained from patients undergoing pulmonary valve replacement with DPH before, after, and for approximately 3 years after implantation. Absolute counts and percentages of mature T- (CD3(+)), B- (CD19(+)), and natural killer- (CD16(+)/CD56(+)) cells, as well as T helper- (CD4(+)) and cytotoxic T-cell- (CD8(+)) subsets, were determined by fluorescence-activated cell sorting (FACS). Between May 2009 and September 2013, 199 blood samples taken from 47 patients with a mean age at DPH implantation of 16.6±10.8 years were analyzed. The hemodynamic performance of DPH was excellent in all but one patient, and no valve-related deaths or conduit explantations were observed. The short-term follow up revealed a significant postoperative decrease in cell counts of most subtypes with reconstitution after 3 months. Continued assessment did not show any significant deviations in cell counts from their baseline values.

CONCLUSION

The absence of cellular immune response in patients receiving DPH supports the concept that decellularization can provide a basis for autologous regeneration.

Tissue engineering of autologous heart valves: a focused update

The prevalence of valvular heart disease is expected to increase in the coming decades, with an associated rise in valve-related surgeries. Current options for valve prostheses remain limited, essentially confined to mechanical or biological valves. Neither selection provides an optimal balance between structural integrity and associated morbidity. Mechanical valves offer exceptional durability coupled with a considerable risk of thrombogenesis. Conversely, a biological prosthesis affords freedom from anticoagulation, but with a truncated valve lifespan. Tissue-engineered heart valves have been touted as a solution to this dilemma, by offering an immunopriviledged prosthesis combined with resistance from degeneration and the potential to grow. Although the reality of commercially available tissue-engineered heart valves remains distant, this article will highlight the cellular and clinical advancements in recent years.

Measurement of spatiotemporal intracellular deformation of cells adhered to collagen matrix during freezing of biomaterials

Preservation of structural integrity inside cells and at cell-extracellular matrix (ECM) interfaces is a key challenge during freezing of biomaterials. Since the post-thaw functionality of cells depends on the extent of change in the cytoskeletal structure caused by complex cell-ECM adhesion, spatiotemporal deformation inside the cell was measured using a newly developed microbead-mediated particle tracking deformetry (PTD) technique using fibroblast-seeded dermal equivalents as a model tissue. Fibronectin-coated 500 nm diameter microbeads were internalized in cells, and the microbead-labeled cells were used to prepare engineered tissue with type I collagen matrices. After a 24 h incubation the engineered tissues were directionally frozen, and the cells were imaged during the process. The microbeads were tracked, and spatiotemporal deformation inside the cells was computed from the tracking data using the PTD method. Effects of particle size on the deformation measurement method were tested, and it was found that microbeads represent cell deformation to acceptable accuracy. The results showed complex spatiotemporal deformation patterns in the cells. Large deformation in the cells and detachments of cells from the ECM were observed. At the cellular scale, variable directionality of the deformation was found in contrast to the one-dimensional deformation pattern observed at the tissue scale, as found from earlier studies. In summary, this method can quantify the spatiotemporal deformation in cells and can be correlated to the freezing-induced change in the structure of cytosplasm and of the cell-ECM interface. As a broader application, this method may be used to compute deformation of cells in the ECM environment for physiological processes, namely cell migration, stem cell differentiation, vasculogenesis, and cancer metastasis, which have relevance to quantify mechanotransduction.

Embryological origin of the endocardium and derived valve progenitor cells: from developmental biology to stem cell-based valve repair

The cardiac valves are targets of both congenital and acquired diseases. The formation of valves during embryogenesis (i.e., valvulogenesis) originates from endocardial cells lining the myocardium. These cells undergo an endothelial-mesenchymal transition, proliferate and migrate within an extracellular matrix. This leads to the formation of bilateral cardiac cushions in both the atrioventricular canal and the outflow tract. The embryonic origin of both the endocardium and prospective valve cells is still elusive. Endocardial and myocardial lineages are segregated early during embryogenesis and such a cell fate decision can be recapitulated in vitro by embryonic stem cells (ESC). Besides genetically modified mice and ex vivo heart explants, ESCs provide a cellular model to study the early steps of valve development and might constitute a human therapeutic cell source for decellularized tissue-engineered valves. This article is part of a Special Issue entitled: Cardiomyocyte Biology: Cardiac Pathways of Differentiation, Metabolism and Contraction.

Effects of cryopreservation, decellularization and novel extracellular matrix conditioning on the quasi-static and time-dependent properties of the pulmonary valve leaflet

Decellularized allografts offer potential as heart valve substitutes and scaffolds for cell seeding. The effects of decellularization on the quasi-static and time-dependent mechanical behavior of the pulmonary valve leaflet under biaxial loading conditions have not previously been reported in the literature. In the current study, the stress-strain, relaxation and creep behaviors of the ovine pulmonary valve leaflet were investigated under planar-biaxial loading conditions to determine the effects of decellularization and a novel post-decellularization extracellular matrix (ECM) conditioning process. As expected, decellularization resulted in increased stretch along the loading axes. A reduction in relaxation was observed following decellularization. This was accompanied by a reduction in glycosaminoglycan (GAG) content. Based on previous implant studies, these changes may be of little functional consequence in the short term; however, the long term effects of decreased relaxation and GAG content remain unknown. Some restoration of relaxation was observed following ECM conditioning, especially in the circumferential specimen direction, which may help mitigate any detrimental effects due to decellularization. Regardless of processing, creep under biaxial loading was negligible.