Determination of heat transfer coefficients in plastic French straws plunged in liquid nitrogen

Applying a heat transfer mathematical model for the cryopreservation of rainbow trout (Oncorhynchus mykiss) sperm: How straw location over liquid nitrogen level affects freezing rate and fertilization yield

Cryopreservation of rainbow trout semen under field conditions was analyzed. Straw location over liquid nitrogen level is a crucial variable that affects freezing rate and fertilization yield due to changes in nitrogen vapor external temperature. The objectives were: to analyze cryopreservation protocols by experimentally measuring the cooling rates and fertilization yield of 0.5 ml plastic straws located in nitrogen vapor at different heights corresponding to different external temperatures; to numerically simulate the freezing process, by solving the heat transfer partial differential equations with the corresponding thermo-physical properties of the biological system and the plastic straw; to evaluate and analyze the surface heat transfer coefficient (h) during the freezing process of the straws; to introduce a new variable, the characteristic freezing time (tc), that enables comparison between protocols; this variable was defined as the elapsed period between the initial freezing temperature and a final reference temperature of -40 °C (temperature in which more than 80 % of the water is in a frozen state). The mathematical model predicted the temperature distribution inside the straw, showing a low effect of straw plastic materials (polyethylene-terephthalate glycol, polyvinyl-chloride, and polypropylene) on freezing rates. The average h value obtained from numerical simulations was 25.5 W/m2 K, close to that obtained from the analytical Nusselt correlation for natural convection. An improvement on fertilization trials was observed when the average external nitrogen temperature was -129.6 °C (temperature range: -94 to -171 °C) with an average tc of 56.8 s (ranging between 47 and 72 s). These results corresponded to a height above the level of liquid nitrogen of 2 cm. Comparison with literature reported data showed satisfactory results. Applying mathematical models in the cryobiology field achieved results that are relevant for cryopreservation activities.

Vitrifying multiple embryos in different arrangements does not alter the cooling rate

Vitrification is the most common method of cryopreservation of gametes in fertility clinics due to its improved survival rates compared to slow freezing techniques. For the Open Cryotop® vitrification device, the number of oocytes, or embryos, mounted onto a single device can vary. In this work, a mathematical model is developed for the cooling of oocytes and embryos (samples). The model is solved computationally, to investigate whether varying the number of samples mounted onto the Open Cryotop® affects the cooling rates, and consequently the survival rates, of vitrified samples. Several realistic spatial arrangements of samples are examined, determining their temperature over time. In this way we quantify the effect of spatial arrangement on the cooling rate. Our results indicate that neither the spatial arrangement nor the number of mounted samples has a large effect on cooling rates, so long as the volume of the cryoprotectant remains minimal. The time taken for cooling is found to be on the order of half a second, or less, regardless of the spatial arrangement or number of mounted samples. Hence, rapid cooling can be achieved for any number or arrangement of samples, as long as device manufacturer guidelines are adhered to.

Comparison of Different Materials for Self-Pressurized Vitrification of Feline Oocytes-First Results

Cryobanking is a crucial part on species conservation. Nowadays, there is no suitable protocol for vitrification of feline oocytes. Self-pressurized rapid freezing of different cell types proved to mimic the advantages of high pressure freezing. As this method could also be applied for gamete rescue under field conditions, the aim here was to analyse the impact of self-pressurized vitrification on feline cumulus-oocyte-complexes (COCs) and to determine the appropriate material. Therefore, COCs of domestic cat were randomly vitrified (n = 189) in metal tubes of different materials: Aluminium, silver, and titanium. No significant differences were found on oocytes' competence after thawing. On average, 44% of the COCs presented normal morphology and 48.2% of them showed a polar body after in vitro maturation (IVM) and were subsequently fertilised. Aluminium tubes were positive on toxicity tests, producing the lowest cleavage rates. Silver tubes showed no toxic effect, but the cleavage rate was lower than with titanium tubes, and a previous association with embryotoxicity and biological alterations makes us aware of its indiscriminate use. Titanium seems to be the only inert material of them, presenting a slightly higher maturation (55.6%) and cleavage (20%) rates. Nevertheless, more studies should follow to increase embryo competence after warming.

Effect of the desiccation tolerance and cryopreservation methods on the viability of Citrus limon L. Burm cv. Eureka seeds

Cryopreservation of the germplasm for long-term periods is of great importance to maintain the genetic resource. Argentina is one of the world's highest lemon producing country. The performance of different cooling/warming rates in the cryopreservation method of Citrus limon L. Burm cv. Eureka seeds and their influence on the interval of optimal moisture content in the desiccation stage were analyzed. Water sorption isotherm was determined and modeled using D'Arcy & Watt equation; it provided important information concerning the amounts of water associated to strong, weak and multimolecular binding sites along the sorption isotherm. Seeds tolerated a wide range of desiccation conditions (0.1<a_w<0.85) showing a high viability (>80%), however desiccation to 0.0526 g H₂O g^-1 d.b. (a_w = 0.0901) produced a significant loss of viability. Differential Scanning Calorimetry was used to identify the thermal transitions of lipids and water in the seed; enthalpies were used to calculate the unfrozen water fraction (0.19 g H₂O g^-1 d.b. corresponding to a_w = 0.64). Two cooling/warming rates were tested on desiccated seeds (0.11<a_w<0.85): i) 200 °C min^-1 (reached with seeds placed inside a closed cryogenic vial); ii) 1000 °C min^-1 (reached with aluminum-foiled seeds placed in a perforated cryogenic vial). For both methods, viability was maximum (83.3%) at a_w = 0.64. Lethal ice formation was responsible for the loss of viability at a_w>0.64 corresponding to the unfrozen water fraction. The use of higher cooling/warming rates enables a wider range of desiccation conditions (0.33<a_w<0.76) in cryopreservation procedures. This work contributes to the optimization of cryopreservation methods of economically important germplasm.

Convective heat transfer coefficients of open and closed Cryotop® systems under different warming conditions

The warming of cryopreserved samples supported by small volume devices is governed by heat transfer phenomena which are mathematically described by the solution of the transient heat conduction partial differential equations; the convective heat transfer coefficient (h) is an important parameter involved in the boundary condition which is related to the fluid dynamic behavior at the interface device-warming fluid (water, sucrose solution or air). Unfortunately, h values for small volume devices (i.e. Cryotop^®) have not been experimentally determined. Moreover, heat transfer coefficients during warming of Cryotop^® cannot be obtained through classical dimensionless correlations expressed in terms of Nusselt vs. Reynolds and Prandtl numbers that are available for regular geometries and single materials. It is the purpose of present work to determine the convective heat transfer coefficients (h) by numerically solving the heat transfer equation applying the finite element method. Numerical simulations allowed to predict time-temperature histories and warming rates under different protocols in Cryotop^® system which were compared with literature warming rates reported for this device. The h values were calculated considering the heterogeneous structure of the domain (microdrop, plastic-support) and the irregular three-dimensional geometry. The warming conditions analyzed were: a) open system in contact with air and sucrose solution at 23 °C) and b) closed system in contact with air and water at 23 °C. The h values of the Cryotop^® open system immersed in sucrose solution (23 °C), that according to literature achieved a survival in the order of 80%, are in the range of 1800-2200 W/m²K. The h values obtained in this work for warming conditions are critical parameters for cryobiologists when studying heat transfer rate in this small volume device.

Near-infrared laser mediated modulation of ice crystallization by two-dimensional nanosheets enables high-survival recovery of biological cells from cryogenic temperatures

Two-dimensional (2D) graphene oxide (GO) and molybdenum disulfide (MoS2) nanosheets (NSs) have been widely used as photothermal agents and as potential carriers of antitumor drugs. Their spatial thermal effects have been extensively explored for use at physiological and hyperthermic temperatures (37 to 46 °C). Furthermore, the modulation of the spatial thermal distributions with these NSs may have even more profound applications in the microstructural control of biomaterials at cryogenic temperatures (-196 to 37 °C). These applications include bioinspired microfabrication via freezing, food and drug freeze-drying, and biomaterial cryopreservation. However, such thermal effects of NSs and their applications at cryogenic temperatures had never been fully explored. Therefore, in this study, we have utilized the near-infrared laser induced photothermal effects of GO and MoS2 NSs to suppress the ice nucleation and ice crystal growth during warming of the biosamples. Using this approach, biological cells subjected to fast cooling to a deeply frozen state (-196 °C) were successfully recovered with high survival rates and full biological functionality. Thus, we provide a NS based effective approach to control the crystallization behaviors of water during warming at cryogenic temperatures, as NSs may have wide applications in both materials science and bioengineering.

Self-Pressurized Rapid Freezing as Cryo-Fixation Method for Electron Microscopy and Cryopreservation of Living Cells

Reduction or complete prevention of ice crystal formation during freezing of biological specimens is mandatory for two important biological applications: (1) cryopreservation of living cells or tissues for long-term storage, and (2) cryo-fixation for ultrastructural investigations by electron microscopy. Here, a protocol that is fast, easy-to-use, and suitable for both cryo-fixation and cryopreservation is described. Samples are rapidly cooled in tightly sealed metal tubes of high thermal diffusivity and then plunged into a liquid cryogen. Due to the fast cooling speed and high-pressure buildup internally in the confined volume of the metal tubes, ice crystal formation is reduced or completely prevented, resulting in vitrification of the sample. For cryopreservation, however, a similar principle applies to prevent ice crystal formation during re-warming. A detailed description of procedures for cooling (and re-warming) of biological samples using this technique is provided. © 2018 by John Wiley & Sons, Inc.

Modeling and experimental studies of enhanced cooling by medical gauze for cell cryopreservation by vitrification

Vitrification is considered as an important alternative approach to traditional slow freezing method for cryopreservation of cells. A typical cell vitrification procedure involves a non-equilibrium cooling process commonly accomplished in liquid nitrogen, while in which film boiling is believed to greatly hinder heat transfer surrounding the sample, resulting in incomplete vitrification or a much higher critical concentration. In this study, we developed a simple while effective approach, wrapping traditional French-type straw with medical gauze, to greatly enhance convective heat transfer during cooling by suppress film boiling. We further established a coupled heat transfer model for cooling and warming of cell suspensions to investigate the inherent thermodynamic mechanism in this approach. The model describes both the macroscale thermal distributions in extracellular solution and the microscale ice crystallization inside the cells. The simulation indicated that straws wrapped with medical gauze would increase cell survival subject to vitrification cryopreservation by significantly increasing the cooling rate to inhibit intracellular ice formation (IIF). Our experiments on human umbilical vein endothelial cells (HUVECs) further confirmed the predictions in that the cell survival rate was significantly increased by wrapping straws with medical gauze.

Reversible Cryopreservation of Living Cells Using an Electron Microscopy Cryo-Fixation Method

Rapid cooling of aqueous solutions is a useful approach for two important biological applications: (I) cryopreservation of cells and tissues for long-term storage, and (II) cryofixation for ultrastructural investigations by electron and cryo-electron microscopy. Usually, both approaches are very different in methodology. Here we show that a novel, fast and easy to use cryofixation technique called self-pressurized rapid freezing (SPRF) is–after some adaptations–also a useful and versatile technique for cryopreservation. Sealed metal tubes with high thermal diffusivity containing the samples are plunged into liquid cryogen. Internal pressure builds up reducing ice crystal formation and therefore supporting reversible cryopreservation through vitrification of cells. After rapid rewarming of pressurized samples, viability rates of > 90% can be reached, comparable to best-performing of the established rapid cooling devices tested. In addition, the small SPRF tubes allow for space-saving sample storage and the sealed containers prevent contamination from or into the cryogen during freezing, storage, or thawing.

Cryoprotectant redistribution along the frozen straw probed by Raman spectroscopy

The distribution of cryoprotectant (10% glycerol) and ice along the frozen plastic straw (the most useful container for freezing mammalian semen, oocytes and embryos) was studied by Raman scattering technique. Raman spectroscopy being a contactless, non-invasive tool was applied for the straws filled with the cryoprotectant solution and frozen by controlled rate programs commonly used for mammalian embryos freezing. Analysis of Raman spectra measured at different points along the straw reveals a non-uniform distribution of the cryoprotectant. The ratio between non-crystalline solution and ice was found to be increased by several times at the bottom side of the solution column frozen by the standard freezing program. The increase of the cryoprotectant fraction occurs in the area where embryos or oocytes are normally placed during their freezing. Possible effects of the cooling rate and the ice nucleation temperature on the cryoprotectant fraction at the bottom side of the solution column were considered. Our findings highlight that the ice fraction around cryopreserved embryos or oocytes can differ significantly from the averaged one in the frozen plastic straws.