Temperature responsive smart polymer for enabling affinity enrichment of current coronavirus (SARS-CoV-2) to improve its diagnostic sensitivity

A Comparative Study of "Grafting to" and "Grafting from" Conjugation Methods for the Preparation of Antibody-Temperature-Responsive Polymer Conjugates

Early diagnosis of infectious diseases is still challenging particularly in a nonlaboratory environment or limited resources areas. Thus, sensitive, inexpensive, and easily handled diagnostic approaches are required. The lateral flow immunoassay (LFIA) is commonly used in the screening of infectious diseases despite its poor sensitivity, especially with low pathogenic loads (early stages of infection). This article introduces a novel polymeric material that might help in the enrichment and concentration of pathogens to overcome the LFIA misdiagnosis. To achieve this, we evaluated the efficiency of introducing poly(N-isopropylacrylamide) (PNIPAAm) into immunoglobulin G (IgG) as a model antibody using two different conjugation methods: grafting to (GT) and grafting from (GF). The IgG-PNIPAAm conjugates were characterized using SDS-PAGE, DLS, and temperature-responsive phase transition behavior. SDS-PAGE analysis revealed that the GF method was more efficient in introducing the polymer than the GT method, with calculated polymer introduction ratios of 61% and 34%, respectively. The GF method proved to be less susceptible to steric hindrance and more efficient in introducing high-molecular-weight polymers into proteins. These results are consistent with previous studies comparing the GT and GF methods in similar systems. This study represents an important step toward understanding how the choice of polymer incorporation method affects the properties of IgG-PNIPAAm conjugates. The synthesized polymer allowed binding and enrichment of mouse IgG that was used as a model antigen with a clear LFIA band. On the basis of our findings, this system might help in improving the sensitivity of simple diagnostics.

Development of Apoptotic-Cell-Inspired Antibody-Drug Conjugate for Effective Immune Modulation

BACKGROUND

Apoptotic cells' phosphoserine (PS) groups have a significant immunosuppressive effect. They inhibit proinflammatory signals by interacting with various immune cells, including macrophages, dendritic cells, and CD4+ cells. Previously, we synthesized PS-group-immobilized polymers and verified their immunomodulatory effects. Despite its confirmed immunomodulatory potential, the PS group has not been considered as a payload for antibody-drug conjugates (ADCs) in a targeted anti-inflammatory approach.

AIM

We conducted this research to introduce an apoptotic-cell-inspired antibody-drug conjugate for effective immunomodulation.

METHOD

Poly(2-hydroxyethyl methacrylate-co-2-methacryloyloxyethyl phosphorylserine) (p(HEMA-co-MPS)) was synthesized as a payload using RAFT polymerization, and goat anti-mouse IgG was selected as a model antibody, which was conjugated with the synthesized p(HEMA-co-MPS) via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-Hydroxysuccinimide (EDC/NHS) reaction. The antibody-binding affinity, anti-inflammatory potential, and cytotoxicity measurements were evaluated.

RESULTS

We successfully synthesized ADCs with a significant anti-inflammatory effect and optimized the antibody-polymer ratio to achieve the highest antibody-binding affinity.

CONCLUSION

We successfully introduced p(HEMA-co-MPS) to IgG without decreasing the anti-inflammatory potential of the polymer while maintaining its targeting ability. We suggest that the antibody-polymer ratio be appropriately adjusted for effective therapy. In the future, this technology can be applied to therapeutic antibodies, such as Tocilizumab or Abatacept.

Smart stimuli-responsive drug delivery systems in spotlight of COVID-19

The world has been dealing with a novel severe acute respiratory syndrome (SARS-CoV-2) since the end of 2019, which threatens the lives of many people worldwide. COVID-19 causes respiratory infection with different symptoms, from sneezing and coughing to pneumonia and sometimes gastric symptoms. Researchers worldwide are actively developing novel drug delivery systems (DDSs), such as stimuli-responsive DDSs. The ability of these carriers to respond to external/internal and even multiple stimuli is essential in creating "smart" DDS that can effectively control dosage, sustained release, individual variations, and targeted delivery. To conduct a comprehensive literature survey for this article, the terms "Stimuli-responsive", "COVID-19″ and "Drug delivery" were searched on databases/search engines like "Google Scholar", "NCBI", "PubMed", and "Science Direct". Many different types of DDSs have been proposed, including those responsive to various exogenous (light, heat, ultrasound and magnetic field) or endogenous (microenvironmental changes in pH, ROS and enzymes) stimuli. Despite significant progress in DDS research, several challenging issues must be addressed to fill the gaps in the literature. Therefore, this study reviews the drug release mechanisms and applications of endogenous/exogenous stimuli-responsive DDSs while also exploring their potential with respect to COVID-19.

Preparation of Temperature-Responsive Antibody–Nanoparticles by RAFT-Mediated Grafting from Polymerization

Herein, we report the preparation of temperature-responsive antibody–nanoparticles by the direct polymerization of N-isopropylacrylamide (NIPAAm) from immunoglobulin G (IgG). To this end, a chain transfer agent (CTA) was introduced into IgG, followed by the precipitation polymerization of NIPAAm in an aqueous medium via reversible addition–fragmentation chain transfer polymerization above the lower critical solution temperature (LCST). Consequently, antibody–polymer particles with diameters of approximately 100–200 nm were formed. Owing to the entanglement of the grafted polymers via partial chemical crosslinking, the antibody–nanoparticles maintained their stability even at temperatures below the LCST. Further, the dispersed nanoparticles could be collected by thermal precipitation above the LCST. Additionally, the antibody–nanoparticles formulation could maintain its binding constant and exhibited a good resistance against enzymatic treatment. Thus, the proposed antibody–nanoparticles can be useful for maximizing the therapeutic potential of antibody–drug conjugates or efficacies of immunoassays and antibody recovery and recycling.

Trend of Polymer Research Related to COVID-19 Pandemic: Bibliometric Analysis

Polymeric materials are used for personal protective equipment (PPE), which is mandatory for clinicians to use when handling coronavirus disease 2019 (COVID-19) patients. The development of diagnostic tools and vaccines for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is also dependent on polymer technology. This current report aims to provide readers with the trend of polymer research regarding the COVID-19 pandemic, by employing bibliometric analysis. A literature search on the Scopus database (31 January 2022) was carried out using predetermined terms. Using Scopus database features, the publications were filtered based on the year of publication (2020-2022), types of articles (original research and review), and language (English). The metadata were extracted in a CSV (.csv) file, to be later used in VOSviewer software. The data were presented in a table, graph, and network visualization. As many as 512 publications were included, consisting of 66.4% original research articles and 33.6% review articles. Most of the publications were written by authors whose affiliation was in the United States (n = 118, 23%) and covering the Materials Science subject area (n = 142, 27.7%). The Ministry of Education of China was the most productive organization, publishing 11 articles. The National Science Foundation of China was the top funding source, supporting 45 publications. Heinz C. Schröder was the most prolific author, publishing nine articles. Science of the Total Environment was the leading journal publishing the included studies. The trend of polymer technology related to COVID-19 mostly covers PPE and waste-management themes. The use of polymer technology as a delivery system for the anti-SARS-CoV-2 and COVID-19 vaccine is also among the frequently researched areas. We encourage more research in the field of polymer technology be carried out, to overcome the global pandemic.

Fluorescent bioassay for SARS-CoV-2 detection using polypyrene-g-poly(ε-caprolactone) prepared by simultaneous photoinduced step-growth and ring-opening polymerizations

The construction of a rapid and easy immunofluorescence bioassay for SARS-CoV-2 detection is described. We report for the first time a novel one-pot synthetic approach for simultaneous photoinduced step-growth polymerization of pyrene (Py) and ring-opening polymerization of ε-caprolactone (PCL) to produce a graft fluorescent copolymer PPy-g-PCL that was conjugated to SARS-CoV-2-specific antibodies using EDC/NHS chemistry. The synthesis steps and conjugation products were fully characterized using standard spectral analysis. Next, the PPy-g-PCL was used for the construction of a dot-blot assay which was calibrated for applications to human nasopharyngeal samples. The analytical features of the proposed sensor showed a detection range of 6.03–8.7 LOG viral copy mL⁻¹ (Ct Scores: 8–25), the limit of detection (LOD), and quantification (LOQ) of 1.84 and 6.16 LOG viral copy mL⁻¹, respectively. The repeatability and reproducibility of the platform had a coefficient of variation (CV) ranging between 1.2 and 5.9%. The fluorescence-based dot-blot assay was tested with human samples. Significant differences were observed between the fluorescence intensity of the negative and positive samples, with an overall correct response of 93.33%. The assay demonstrated a high correlation with RT-PCR data. This strategy opens new insights into simplified synthesis procedures of the reporter molecules and their high potential sensing and diagnosis applications.

Temperature Responsive Polymer Conjugate Prepared by "Grafting from" Proteins toward the Adsorption and Removal of Uremic Toxin

In this study, temperature-responsive polymer-protein conjugate was synthesized using a “grafting from” concept by introducing a chain transfer agent (CTA) into bovine serum albumin (BSA). The BSA-CTA was used as a starting point for poly(N-isopropylacrylamide) (PNIPAAm) through reversible addition-fragmentation chain transfer polymerization. The research investigations suggest that the thermally responsive behavior of PNIPAAm was controlled by the monomer ratio to CTA, as well as the amount of CTA introduced to BSA. The study further synthesized the human serum albumin (HSA)-PNIPAAm conjugate, taking the advantage that HSA can specifically adsorb indoxyl sulfate (IS) as a uremic toxin. The HSA-PNIPAAm conjugate could capture IS and decreased the concentration by about 40% by thermal precipitation. It was also revealed that the protein activity was not impaired by the conjugation with PNIPAAm. The proposed strategy is promising in not only removal of uremic toxins but also enrichment of biomarkers for early diagnostic applications.