Thirteen-year randomized controlled clinical trial of a two-step self-etch adhesive in non-carious cervical lesions

Impact of functional monomers, bioactive particles, and HEMA, on the adhesive performance of self-etch adhesive systems applied to simulated altered dentin

OBJECTIVES

This study aimed to evaluate how self-etching/universal dental adhesive systems (DASs) with differing compositions interact with sound (S), post-radiotherapy (irradiated; I), and artificially eroded (E) dentin in terms of bonding properties.

METHODS

The DASs tested were Adper Scotchbond Multipurpose (MP; control), Clearfil SE Bond (SE), FL Bond II (FL), Adper Single Bond Universal (SU) and BeautiBond Xtreme (BX). They were analyzed for initial and 6-month microtensile bond strength (µTBS, n = 12), mode of failure (40 x), scanning electron microscopy (SEM), surface wettability (W, n = 10), and degree of conversion (DC, n = 3) via Fourier-transform infrared spectroscopy (FTIR). Normal and homogeneous distribution of the data allowed their analyses through ANOVA and Tukey tests (p < 0.05).

RESULTS

All DASs except BX exhibited higher µTBS for S decreasing for I and E. BX demonstrated the greatest stability among the altered substrates. FL showed the most hydrophobic properties, likely due to its bioactive components. Universal DASs achieved higher DC, regardless of composition.

CONCLUSIONS

HEMA-free formulation combined with carboxylic and phosphoric acids in BX, achieved the most stable performance for altered substrates.

CLINICAL SIGNIFICANCE

Since radiotherapy and erosion affect dentin, their characteristics compromise adhesive performance and impair the achievement of durable and satisfactory restorations. The use of universal adhesives less dependent on calcium seems less susceptible to hydrolytic degradation and may be a promising option for maintaining adhesive stability over time.

New adhesive rehabilitation technique with indexed occlusal tabletops made by 3D printing technology

OBJECTIVE

In oral rehabilitation, a full mouth minimal invasive treatment can represent a major challenge for the patient and the dentist. The purpose of this article is to present a new technique to restore eroded teeth and recover the vertical dimension with a simple and predictable technique.

CLINICAL CONSIDERATIONS

Occlusal tabletop restorations are a suitable conservative option to restore anatomy and vertical dimension augmentation but highly sensitive. The cementation of those restorations without stable landmarks, the cement excess removal, the insertion path, or the time needed are some of the difficulties can be faced. Now a days with the new CAD-CAM techniques is possible to develop a new occlusal tabletop manufacturing alternative utilizing 3D-printed technology by unifying the restorations with a customized connector that allows us to print several onlays at same time, as a single object, also being cemented at once.

CONCLUSIONS

This protocol reduces the technique sensitivity of a vertical dimension oral rehabilitation process, reduce the chair time, enhancing the patient-comfort and delivers a unique way to restore dental lost anatomy as a definitive or temporary way with printing materials.

CLINICAL SIGNIFICANCE

With the advent of new CAD-CAM 3D printing materials, which are increasingly versatile and gaining favor among clinicians, it is now possible to address complex clinical situations with greater predictability. This technology enables the development of treatment solutions that are both effective and efficient, consequently reducing clinical time for the patient.

High-Performance Bioinspired Microspheres for Boosting Dental Adhesion

Dental adhesives are widely used in daily practice for minimally invasive restorative dentistry but suffer from bond degradation and biofilm attack. Bio-inspired by marine mussels having excellent surface-adhesion capability and high chemical affinity of polydopamine (PDA) to metal ions, herein, experimental zinc (Zn)-containing polydopamine-based adhesive formulation, further being referred to as "Zn-PDA@SiO2"-incorporated adhesive is proposed as a novel dental adhesive. Different Zn contents (5 and 10 mm) of Zn-PDA@SiO2 are prepared. Considering the synergistic effect of Zn and PDA, Zn-PDA@SiO2 not only presents excellent antibacterial potential and notably inhibits enzymatic activity (soluble and matrix-bound proteases), but also exhibits superior biocompatibility and biosafety in vitro/vivo. The long-term bond stability is substantially improved by adding 5 wt% 5 mm Zn-PDA@SiO2 to the primer. The aged bond strength of the experimentally formulated dental adhesives applied in self-etch (SE) bonding mode is 1.9 times higher than that of the SE gold-standard adhesive. Molecular dynamics calculations indicate the stable formation of covalent bonds, Zn-assisted coordinative bonds, and hydrogen bonds between PDA and collagen. Overall, this bioinspired dental adhesive provides an avenue technology for innovative biomedical applications and has already revealed promising perspectives for dental restorative dentistry.

A 2-Year Randomized Clinical Trial of Three Bonding Techniques in Non-Carious Cervical Lesions

Background and objective: The aim of this randomized split-mouth study-controlled clinical trial was to compare the 2-year clinical performance of resin composite restorations placed at non-caries cervical lesions (NCCL) with one-step self-etch, total-etch, and selective enamel etch and self-etch adhesive techniques. Materials and methods: Thirty-two patients received three resin composite restorations each at NCCLs (Tetric EvoCeram/Ivoclar/Vivadent), bonded with a total-etch adhesive agent (ExciTE F/Ivoclar/Vivadent) and a self-etch (AdheSE One F/Ivoclar/Vivadent) without and with selective enamel etching. All restorations were evaluated by two examiners at baseline, 6-, 12-, 18-, and 24-months with FDI clinical criteria (post-operation regarding retention, caries occurrence, marginal adaptation, and marginal staining). A logistic regression analysis, a Cohen's kappa statistic, a multifactorial analysis, and X2 were performed with generalized estimating equations. Results: After 2 years, the retention rate was 86.8% for total etch, 92.26% for self-etch, and 93.63% for selective enamel etching and self-etch. No caries was detected on the restorations. Concerning marginal adaptation, the clinically perfect restorations were 26.9% for the total-etch technique, 16% for self-etch, and 25.9% for selective enamel etch and self-etch. The logistic regression model revealed that only time reduced the probability of perfect marginal adaptation. Conclusions: All three adhesive strategies provided restorations with no significant differences in the retention rate or marginal adaptation, whereas the total etch yielded better performance for marginal staining. All restorations were assessed as clinically acceptable after 2 years.

Warm Air Delivery in Adhesive Application: Effect on Bonding Performance and Morphological Outcomes

Solvent evaporation within an adhesive layer is a crucial step during a bonding process. The aim of this current research was to test whether the use of different air temperatures (20 °C, 40 °C, and 60 °C) for solvent evaporation improves the performance of four adhesive systems to dentin. Sixty non-carious human molar teeth were randomly prepared for micro-tensile bond strength (μTBS) tests. Four different adhesive systems, Prime&Bond Universal (PBU), OptiBond Universal (OBU), OptiBond FL (OBFL), and Clearfil SE (CSE), were applied following the manufacturer's instructions. Three groups based on the air-drying temperature were used: solvent evaporation was performed with either of warm (40 °C), (60 °C), and cold air as control group (20 °C) for 10 s at a distance of 5 cm. In all bonded surfaces, three resin composite (Reflectys, Itena Clinical, Paris, France) layers of 2 mm thickness were built up. The resin-dentin samples were kept in distilled water at 37 °C for 24 h and 6 months, respectively, before μTBS testing. Failure analysis, scanning electron microscopy of resin-dentin bonded interface, and solvent evaporation rate were tested as secondary variables. All analyses were conducted using a significance level of α = 0.05. Bond strength (BS) values were similar among all the adhesive systems used (p > 0.05). Also, the aging factor did not affect the BS (p > 0.05). Only the factor of temperature used for solvent evaporation resulted in a statistically significant effect (p < 0.05), with the temperature of 60 °C being the highest value (p < 0.05). A failure mode evaluation revealed mostly adhesive or mixed modes of failures in all the different temperatures of air used for the solvent evaporation of each adhesive system. The thickness of the adhesive layer and the creation of resin tags varied amongst the temperatures evaluated. For all adhesive systems tested, the use of 40 °C or 60 °C air for solvent evaporation led to an increased mass loss. Warmer temperatures for solvent evaporation contributed positively to bonding performance, enhancing both the quality of the adhesive layer and its interaction with the dentin tissue. Optimizing solvent evaporation with warmer air temperatures (40 °C and 60 °C) significantly improved µTBS, offering a practical means to enhance the quality and longevity of adhesive restorations in esthetic dentistry.

Endodontic Treatment of a Maxillary Incisor Tooth in a Chimpanzee (Pan troglodytes)

Chimpanzees (Pan troglodytes) with teeth severely damaged by dental caries and/or periodontal disease are often managed with medication and/or tooth extraction. A common endodontic treatment for severely decayed teeth in a 26-year-old female chimpanzee is reported. The left maxillary central incisor tooth had lost its crown, probably due to trauma that was not recent, and it had a fistula most likely due to chronic apical periodontitis. The diagnosis was confirmed radiographically before treatment. To treat the infected root canal, endodontic treatment used in humans was adapted for a chimpanzee. After the treatment, the tooth was sealed using an adhesive resin composite. At 11-years post-treatment, there were no signs of recurrence of the lesion or of failure of the tooth seal. The results of this case report suggest that common endodontic treatments used in humans are also effective in chimpanzees.

Influence of Application Modes on Increasing Bond Strength Longevity of Self-etching and Universal Adhesive Systems to Enamel

The present study aimed to evaluate the influence of application mode on the short-term microshear bond strength longevity of self-etching and universal adhesive systems to enamel, the failure mode, and the resulting enamel surface micromorphology. Ninety enamel surfaces were obtained from sound third molars, planed, and randomly assigned to nine groups, according to the application mode and the adhesive system (n=10). There were three primer application modes: according to the manufacturer's recommended application time (control), using double the application time recommended for the primer and selective enamel etching. The adhesive systems used were: Clearfil SE Bond (Kuraray), FL-Bond II (SHOFU), and Futurabond U (Voco). At least two resin-bonded composite cylinders (Grandioso Light Flow, Voco) were placed on each enamel surface, and then evaluated for microshear bond strength at 24 hours and 180 days of storage in solution body fluid (SBF) at pH 7.4. Failure modes were evaluated with a stereoscopic microscope at 20× magnification. A micromorphological analysis of the enamel surface was performed under a scanning electron microscope at 5000× magnification before and after the treatments. Mixed models for repeated measures over time showed significant interaction among application modes, adhesive systems, and time periods (p=0.0331). The bond strength of FL-Bond II adhesive to enamel observed after performing selective enamel etching was significantly higher than that observed after applying the control treatment (p=0.0010) at both 24 hours and 180 days. However, no significant difference was observed between the application of this same adhesive at double the time recommended by the manufacturer and the other two application modes (p>0.05). There was also no significant difference in the microshear bond strength for the enamel treatments applied using Clearfil SE Bond and Futurabond U (p>0.05). A significant reduction in bond strength to enamel was observed at the 180-day storage time for all the adhesive systems when selective enamel etching was performed (p<0.0001). No significant association was observed between the adhesive system failure mode and the enamel treatments (p=0.1402 and p=0.7590 for 24 hours and 180 days, respectively). The most prevalent failure was the adhesive type.

Clinical performance of non-carious cervical lesions restored with using self-etch mode of adhesives according to the FDI criteria

AIM

The purpose of this study was to evaluate the 18-month retrospective study of self-etch adhesive (Prime&Bond One Select) and self-etch mode of universal adhesives (Single Bond Universal, Gluma Bond Universal) applied to non-carious cervical lesions according to the World Dental Federation criteria.

MATERIALS AND METHODS

Thirty patients without any systemic disease, good oral hygiene, having at least 20 teeth and six non-carious cervical lesions treated using a self-etch mode of adhesives operated between January and March 2017. Accordingly, 335 restorations were evaluated according to the World Dental Federation criteria at 3, 6, 12 and 18 months. Pillai's Trace test was used to determine the interaction of criteria with time and adhesive systems. IBM SPSS Statistics 21.0 program was used in the analysis. Value of P < 0.05 was accepted as a criterion for statistical significance.

RESULTS

At the end of 18 months, participation was 100%. There was a statistically significant difference P < 0.05 between Prime&Bond One Select and Single Bond Universal, Prime&Bond One Select and Gluma Bond Universal in the 18-month period. In terms of marginal staining, fracture of material and retention, recurrence of caries, erosion and abfraction, tooth integrity criteria at the end of the 18 months, Prime&Bond One Select performed clinically very good, Single Bond Universal and Gluma Bond Universal performed clinically good according to World Dental Federation criteria. Marginal adaptation criteria, Prime&Bond One Select, Single Bond Universal and Gluma Bond Universal performed clinically good. Retention loss rate was found to be the lowest in Prime&Bond One Select and the highest in Gluma Bond Universal.

CONCLUSION

Accordingly, 18-month evaluation of all adhesives used in the study showed clinically acceptable results in all of the World Dental Federation criteria.

The clinical performance of bulk-fill versus the incremental layered application of direct resin composite restorations: a systematic review

OBJECTIVES

To systematically review the scientific evidence comparing the clinical effectiveness of bulk-fill versus incrementally layered conventional resin composites and to evaluate if one method offers clear merits with specific clinical outcomes.

MATERIALS AND METHODS

Using relevant mesh terms and pre-established eligibility criteria in PubMed, Embase, Scopus and Web of Science, a thorough scientific search was conducted with an end-date of 30.04.2023. Randomized controlled clinical trials that involved the direct comparison of Class I and Class II resin composite restorations applied using incremental layering techniques versus bulk-filled in permanent teeth with an observation period of at least six months were considered. To evaluate the bias risk of the finalized records, a revised version of the Cochrane risk-of-bias tool for randomized trials was implemented.

RESULTS

Out of the 1445 records determined, 18 eligible reports were chosen for qualitative analysis. Data obtained was categorized as per, the cavity design, the intervention, the comparator(s), the methods of success/failure assessment, the outcomes, and follow-up. Two studies demonstrated an overall low-risk of bias, fourteen studies raised some concerns, and two studies exhibited high-risk.

CONCLUSION

Bulk filled resin composite restorations demonstrated clinical outcomes similar to those of incrementally layered resin composite restorations within a review interval of 6 months to 10 years.

Noninvasive diagnostic method using optical coherence tomography detected a vulnerable dentin enamel junction created by phosphoric acid etching

To investigate the influence of phosphoric acid etching on the dentin enamel junction (DEJ) using optical coherence tomography (OCT). Human teeth were assigned to four groups: 1. control, no additional treatment (CT); 2. The primer of "SE Bond2" was applied (SE), 3. "Enamel Conditioner" was applied (EC), 4. "K-etchant syringe" was applied (KE). After treatment, the DEJ was observed using a laser microscope (CLSM), OCT, and scanning electron microscopy (SEM). Additionally, an ultimate tensile strength (UTS) test at the DEJ was performed. No cracks were observed by CLSM. In contrast, cracks were observed all samples by SEM. Additionally, OCT revealed a white line along the DEJ in all KE specimens and some EC specimens. The UTS test showed a significant difference between CT and KE. This study found that phosphoric acid etching may cause excessive demineralization and weaken the DEJ. This fragility was observed using a non-invasive diagnostic method using OCT.

Bonding performance of experimental HEMA-free two-step universal adhesives to low C-factor flat dentin

OBJECTIVES

Experimental two-step universal adhesives (2-UAs) providing a particle-filled hydrophobic adhesive resin with a significant film thickness to hydrophobically seal the adhesive interface were designed and synthesized. This study aimed to characterize their interfacial interaction with dentin, to determine whether the 2-UA formulations achieve durable bonding to low C-factor flat dentin and to measure their water sorption.

METHODS

Bonding effectiveness of 2-UAs that combine a 10-MDP-based primer with hydrophobic adhesive resins differing only for filler (BZF-21, BZF-29, and BZF-29_hv) were comparatively investigated with the commercial adhesive Clearfil SE Bond 2 (C-SE2, Kuraray Noritake). Adhesive-dentin interfaces were characterized with TEM. Adhesive-resin disks were immersed in distilled water at 37 °C for 1 week, 6 months and 1 year to measure water sorption and solubility. 'Immediate' and 'aged' micro-tensile bond strength (μTBS) of the adhesives applied in etch-and-rinse (E&R) and self-etch (SE) bonding mode to low C-factor flat dentin were measured. Statistical analyses involved linear mixed-effects (LME) modelling and Kruskal-Wallis testing (p < 0.05).

RESULTS

TEM revealed that E&R hybrid layers were more sensitive to aging than SE hybrid layers. Lower water sorption was recorded for all UAs compared with C-SE2. The immediate μTBS of BZF-21 and BZF-29 was not significantly different from that of C-SE2. The 1-year aged μTBS of all 2-UAs was significantly lower than that of C-SE2, except for BZF-29 applied in E&R mode. A significant reduction in μTBS upon 1-year aging was recorded for BZF-21 and BZF-29 applied in E&R mode. A significant difference in μTBS between E&R and SE bonding modes was recorded for all adhesives except BZF-21.

SIGNIFICANCE

Experimental 2-UAs with a hydrophobic adhesive-resin design produced± 20-μm thick adhesive-resin layers, absorbed less water and resulted in bonding performance that was more aging-resistant when applied in SE than in E&R bonding mode. The silica-filled BZF-29 2-UA revealed the most comparable bonding performance with C-SE2 in a low C-factor condition (flat dentin).

Biofabrication of engineered dento-alveolar tissue

Oral health is essential for a good overall health. Dento-alveolar conditions have a high prevalence, ranging from tooth decay periodontitis to alveolar bone resorption. However, oral tissues exhibit a limited regenerative capacity, and full recovery is challenging. Therefore, regenerative therapies for dento-alveolar tissue (e.g., alveolar bone, periodontal membrane, dentin-pulp complex) have gained much attention, and novel approaches have been proposed in recent decades. This review focuses on the cells, biomaterials and the biofabrication methods used to develop therapies for tooth root bioengineering. Examples of the techniques covered are the multitude of additive manufacturing techniques and bioprinting approaches used to create scaffolds or tissue constructs. Furthermore, biomaterials and stem cells utilized during biofabrication will also be described for different target tissues. As these new therapies gradually become a reality in the lab, the translation to the clinic is still minute, with a further need to overcome multiple challenges and broaden the clinical application of these alternatives.

Some Myths in Dentin Bonding: An Evidence-Based Perspective

Laboratory investigations are essential models responsible for science development. However, laboratory discoveries must be confirmed in a clinical environment where many known and unknown variables and complex mechanisms are involved. Using conclusions from laboratory studies to make clinical recommendations can lead to widespread "unreliable truths" or so-called myths in any field of knowledge. These myths may increase the costs (financial and time) or even cause harm (side effects) that would be unnecessary, given that the current protocol or conduct was previously evaluated in a more complex and complete clinical setting. This article will discuss certain myths in dentin bonding that may influence clinical decision-making, bringing some principles of evidence-based practice to allow a more critical evaluation of the literature findings.

Influence of different tooth etchants on bur-cut and uncut enamel

This study aimed to evaluate the effect of pre-etching for two-step self-etch adhesive bonding to bur-cut and uncut enamel. Bur-cut and uncut enamel surfaces were assigned to surface treatments of no etchant (CT), Enamel Conditioner (EC; Shofu, Kyoto, Japan), or K-etchant syringe (KE; Kuraray Noritake Dental, Tokyo, Japan). The bonded samples were thermal cycled and evaluated by microshear bond strength (μSBS). The adhesive interface after acid-base challenge and the conditioned enamel surfaces were morphologically analyzed using scanning electron microscopy (SEM). For bur-cut enamel, EC and KE pre-etching significantly improved μSBS. For uncut enamel, KE showed higher μSBS than EC. SEM observation revealed that only KE removed the prismless layer of the uncut enamel surface. EC could improve enamel bonding and appears to be a substitute for phosphoric acid, especially for bur-cut enamel. However, uncut enamel could not be effectively conditioned by EC with a lower bond strength than KE.

Sixty-month follow up of three different universal adhesives used with a highly-filled flowable resin composite in the restoration of non-carious cervical lesion

OBJECTIVE

The purpose of this clinical trial was to evaluate and compare the performances of three different universal adhesives used with a highly filled flowable universal resin composite in the restoration of non-carious cervical lesions (NCCLs) over a 60-month period.

MATERIAL AND METHODS

Ninety-nine NCCLs were restored at 18 participants. NCCLs were divided into three different universal adhesive groups: Clearfil Universal Bond (CU) (n = 31), iBOND Universal (IU) (n = 33), and G-Premio Bond (GP) (n = 35). Prior to the adhesive procedures, selective enamel etching was performed with 37% phosphoric acid in all experimental groups. Adhesive systems were applied following the manufacturers' instructions, and the lesions were restored with a highly filled flowable resin composite (G-ænial Universal Flo). Restorations were finished and polished immediately after placement. All restorations were scored with regard to retention, marginal discoloration, marginal adaptation, sensitivity, surface texture, and color match using modified United States Public Health Service (USPHS) criteria after 1 week (baseline) and 6, 12, 18, 24, 36, and 60 months. Statistical analyses were performed using chi-square and McNemar's and Kaplan Meier tests. The level of significance was set at p < 0.05.

RESULTS

After 60 months, the recall rate was 72.2%. Survival rates of CU, IU, and GP restorations were 87%, 85.2%, and 96.5%, respectively. Five CU (25%), 8 IU (34.8%), and 12 GP (42.9%) restorations exhibit bravo scores for marginal adaptation. However, no differences were seen among them. CU showed lower bravo score than IU and GP for marginal discoloration (CU, 0%; IU, 26.1%; GP, 32.1%). Two CU, 7 IU, and 6 GP restorations showed bravo scores for surface texture, and 2 (9.1%) CU and 1 (3.3%) GP restorations were scored as bravo score for color match (p > 0.05).

CONCLUSION

The tested universal adhesives showed similar success rates during the 60-month follow-up. However, CU showed better clinical performance than IU and GP in terms of marginal adaptation and discoloration.

TRIAL REGISTRATION

ClinicalTrials.gov Identifier: NCT03415412 CLINICAL RELEVANCE: The long-term clinical performances of the three universal adhesives in the restoration of NCCLs using selective enamel etching mode were successful after 60 months.

A Retrospective Clinical Study on Factors Influencing the Failure of NCCL Restorations

Objectives

This retrospective study evaluated the factors influencing the clinical failure of noncarious cervical lesion (NCCL) restorations.

Methods

Patients were routinely treated by undergraduate or postgraduate students and randomly received a clinical recall evaluation. A retrospective study was performed with two experienced calibrated examiners to evaluate NCCL restorations, including the critical parameters of retention, caries, marginal discoloration, and marginal integrity. The factors related to the restoration included gender, age, arch site, tooth position, the presence of occlusal wear facets, caries risk, operator, adhesive strategy, and composite. The clinical failure comparison between the parameters and factors was performed using the binary logistic regression analysis.

Results

A total of 460 cervical restorations from 96 patients were evaluated. The adhesive strategy and the presence of occlusal wear facets were the most important factors influencing the parameter failure. Therefore, the highest failure was marginal integrity, in which the gingival marginal integrity failure was 50.7%, and the occlusal marginal integrity failure was 42.4%.

Conclusions

The main factors influencing clinical failure for partial loss, marginal discoloration, and marginal integrity were the adhesive strategy and the presence of occlusal wear facets. Therefore, marginal integrity was the most frequent failure parameter.

Influence of Acidic Environment on Hydrolytic Stability of MDP-Ca Salts with Nanolayered and Amorphous Structures

Purpose

This study aimed to investigate the hydrolytic stability of 10-methacryloyloxydecyl dihydrogen phosphate calcium (MDP-Ca) salts with nanolayered and amorphous structures in different pH environments.

Methods

The MDP-Ca salts were synthesized from MDP and calcium chloride and characterized by X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and transmission electron microscopy (TEM). Inductively coupled plasma-mass spectrometry (ICP-MS) was used to quantify the release of calcium from the synthesized MDP-Ca salt, MDP-treated hydroxyapatite (MDP-HAp), and untreated HAp after soaking in acidic and neutral solutions for 1, 7, and 30 days. To study the hydrolytic process, we carried out molecular dynamics (MD) simulations of the nanolayered MCS-MD (monocalcium salt of the MDP dimer) and DCS-MD (dicalcium salt of the MDP dimer) structures, as well as of the amorphous-phase MCS-MM (monocalcium salt of the MDP monomer).

Results

The TEM images showed that the nanolayered structures were partially degraded by acid attack. Based on the ICP-MS results, the hydrolysis rate of the MDP-Ca salt in acidic and neutral environments followed the order HAp > MDP-HAp > MDP-Ca salt. The MD simulations showed that, in acidic environments, clusters of MDP remained aggregated and all Ca²⁺ ions separated from the MDP monomer to interact with water molecules in aqueous solution. In neutral environments, Ca²⁺ ions always interacted with phosphate groups, OH⁻ ions, and water molecules to form clusters centered on Ca²⁺ ions.

Conclusion

MDP-Ca presented higher hydrolysis rates in acidic than neutral environments. Nanolayered MCS-MD possessed the highest resistance to acidic hydrolysis, followed by amorphous MCS-MM and DCS-MD.

Riboflavin and Its Effect on Dentin Bond Strength: Considerations for Clinical Applicability-An In Vitro Study

Bioactive collagen crosslinkers propose to render the dentin hybrid layer less perceptive to hydrolytic challenge. This study aims to evaluate whether bond strength of dental resin composite to dentin benefits from riboflavin (RB)-sensitized crosslinking when used in a clinically applicable protocol. A total of 300 human dentin specimens were prepared consistent with the requirements for a macro-shear bond test. RB was applied on dentin, either incorporated in the primer (RBp) of a two-step self-etch adhesive or as an aqueous solution (RBs) before applying the adhesive, and blue light from a commercial polymerization device was used for RB photoactivation. Bonding protocol executed according to the manufacturer's information served as control. Groups (n = 20) were tested after 1 week, 1 month, 3 months, 6 months or 1 year immersion times (37 °C, distilled water). The different application methods of RB significantly influenced bond strength (p < 0.001) with a medium impact (η2p = 0.119). After 1 year immersion, post hoc analysis identified a significant advantage for RB groups compared to RBp (p = 0.018), which is attributed to a pH-/solvent-dependent efficiency of RB-sensitized crosslinking, stressing the importance of formulation adjustments. We developed an application protocol for RB-sensitized crosslinking with emphasis on clinical applicability to test its performance against a gold-standard adhesive, and are confident that, with a few adjustments to the application solution, RB-sensitized crosslinking can improve the longevity of adhesive restorations in clinics.

Challenging the Concept that OptiBond FL and Clearfil SE Bond in NCCLs Are Gold Standard Adhesives: A Systematic Review and Meta-analysis

PURPOSE

The following PICO (Patient/Population, Intervention, Comparison, and Outcomes) question was proposed: "Are retention rates of composite resin restorations in noncarious cervical lesions (NCCLs) when using adhesives considered "gold standard" (OptiBond FL and Clearfil SE Bond) higher than those obtained with other adhesives brands"?

METHODS

A search was performed in February 2019 (updated in November 2019) in the PubMed/MEDLINE, EMBASE, LILACS, BBO, Web of Science, Cochrane Library, Grey Literature, and IADR abstracts (1990-2018); unpublished and ongoing trial registries, dissertations, and theses were also searched. Only randomized clinical trials (RCTs) conducted in NCCLs that compared either OptiBond FL or Clearfil SE Bond adhesive with other commercially available adhesives were included. The risk of bias (RoB) was applied by using the Cochrane Collaboration tool. A meta-analysis was performed for retention rates at different follow-up times using a random effects model for both the adhesives. Heterogeneity was assessed with the Cochran Q test and I2 statistics. Grading of Recommendations: Assessment, Development and Evaluation (GRADE) assessed the quality of evidence.

RESULTS

After removal of duplicates and noneligible articles, 25 studies remained for qualitative synthesis, as one study was common to the two adhesives, of which 9 studies were used for the OptiBond FL meta-analysis and 14 for the Clearfil SE Bond meta-analysis. No significant differences were observed for retention rates in follow-up periods of 12-24 months (p=0.97), 36-48 months (p=0.72), or 108-156 months (p=0.73) for OptiBond FL; and for 12-24 months (p=0.10) and 36-48 months (p=0.17) for Clearfil SE Bond. A significant difference was only found for OptiBond FL at 60-96 months (p=0.02), but only three studies were included in this meta-analysis.

CONCLUSIONS

The evidence from available RCTs conducted in NCCLs that compared OptiBond FL or Clearfil SE Bond does not support the widespread concept that these adhesives are better than any other competitive brands available in the dental market.

Single gingival recession associated with non-carious cervical lesion treated by partial restoration and coronally advanced flap with or without xenogenous collagen matrix: A randomized clinical trial evaluating the coverage procedures and restorative protocol

BACKGROUND

Evaluate the use of collagen matrix (CM) as adjunctive to coronally advanced flap (CAF versus CAF + CM) to treat gingival recession (GR) associated with non-carious cervical lesion-combined defects (CDs).

METHODS

Sixty-two patients presenting 62 CDs (RT1 GR and non-carious cervical lesion (NCCLs) were randomly allocated to either CAF group (n = 31): partial restoration of the NCCL and CAF; or to CAF + CM group (n = 31): partial restoration of the NCCL and CAF associated with CM. Clinical, esthetic, patient-centered outcomes, and restorative parameters were assessed.

RESULTS

After 12 months, CD coverage were 55.2% for CAF and 54.4% for CAF + CM (P = 0.8). Recession reduction were 1.9 ± 0.8 mm for CAF and 2.0 ± 0.7 mm for CAF + CM (P = 0.6). CAF+CM resulted in higher increase in keratinized tissue (KT) width (CAF: 0.3 ± 0.7 mm; CAF + CM: 0.9 ± 0.8 mm; P = 0.004) and KT thickness gain (CAF: 0.1 ± 0.3 mm; CAF + CM: 0.7 ± 0.2 mm; P = 0.001). Both treatments presented low postoperative pain and resulted in esthetics improvements. In addition, no restoration was lost, 27.4% showed a reduction of the superficial polishing, and 8% showed marginal staining, but still clinically acceptable.

CONCLUSION

Partial resin composite restoration (with the apical limit up to 1 mm of the estimated CEJ) and CAF alone or combined with CM are suitable for treating CDs. The use of CM provided additional benefits in terms of KT width and thickness gain. (NCT03341598).

A three-year randomized clinical trial evaluating direct posterior composite restorations placed with three self-etch adhesives

Aim

To compare the clinical performance of composite restorations placed with a universal adhesive, one-step and two-step self-etch adhesives in class I and II posterior cavities.

Materials and methods

In this in vivo study, 46 volunteers presenting with at least three carious lesions were included. Each participant received the three restorative systems: universal adhesive/nanofilled composite (Scotchbond Universal/Filtek Z350 XT: SBU/FZXT), one-step self-etch adhesive/microhybrid composite (G-aenial bond/G-aenial Posterior: GB/GP) and the two-step self-etch adhesive/nanohybrid composite (OptiBond XTR/Herculite Ultra: OBX/HU). The adhesives were all placed in self-etch mode. In total, 138 restorations were evaluated at baseline and at 6,12 and 36 months using the modified United States Public Health Service criteria. Data were analysed using Kruskal-Wallis, Mann-Whitney U, Friedman and Wilcoxon non-parametric tests (p < .05). Ninety-one restorations were evaluated at 36 months.

Results

Seven restorations, three SBU/FZXT, three GB/GP and one OBX/HU failed during this study. The reasons for failure were marginal fracture and secondary caries. SBU/FZXT restorations showed significant marginal deterioration in all parameters. Overall success rates were: 93.5% (SBU/FZXT), 96.6% (GB/GP) and 96.8% (OBX/HU).

Conclusions

After three years, the three restorative systems have comparable clinical effectiveness and success rates, except for the marginal integrity, that was suboptimal for both the SBU/FZXT and GB/GP restorations in comparison to the OBX/HU restorations.

Update on Enamel Bonding Strategies

Optimal strategies for the application of an adhesive differ between enamel and dentin because of the differences in their composition. The development of adhesive systems has mainly focused on the bonding of dentin, rather than on the enamel, by etching with phosphoric acid (PA). Dental adhesive technologies continue to rapidly advance, and various adhesive systems have been developed since the study of Buonocore in 1955. He introduced the enamel acid-etch technique. Then, the etch-and-rinse (ER) system was developed, and subsequently, the self-etch (SE) system. Universal adhesives are a new generation of one-bottle SE adhesives that can be applied with either ER mode or SE mode, or a combined system involving selective enamel etching mode. Since the combination of PA etching and the SE system differs from conventional ER systems, the enamel bonding strategy should be carefully considered. This concise review of the literature on reliable enamel bonding strategies should prove helpful to clinicians to choose an appropriate adhesive system to achieve optimal clinical outcomes.

Clinical effectiveness of direct resin composite restorations bonded using one-step or two-step self-etch adhesive systems: A three-year multicenter study

The purpose of this multicenter clinical study was to compare the mid-term clinical effectiveness of direct resin composite restorations using one-step or two-step self-etch adhesives (1-SEAs or 2-SEAs). In total, 352 restorations of class I-V cavities and non-carious cervical lesions in vital teeth (1-SEAs; 52 cases, 2-SEAs; 300 cases) were placed at nine university hospitals and evaluated according to the modified USPHS criteria at baseline, and after 1, 2, and 3 years. The recall rates were 86.6% (1 year), 80.1% (2 years), and 62.2% (3 years). Two restorations failed due to fracture during the follow-up, and there was no significant difference in survival rates between 1-SEAs (97.6%) and 2-SEAs (99.4%). However, 2-SEAs exhibited significantly lower occurrences of discoloration, marginal discoloration, fracture, and plaque retention. Moreover, the subjects reported a significantly lower postoperative hypersensitivity and higher overall satisfaction at all evaluation periods if 2-SEAs were used.

Clinical Performance of Filled/Nanofilled Versus Nonfilled Adhesive Systems in Noncarious Cervical Lesions: A Systematic Review and Meta-analysis

CLINICAL RELEVANCE

The use of filled adhesive systems does not influence the clinical performance of the adhesive restoration in noncarious cervical lesions.

SUMMARY

Influence of primer contamination on the bonding interface of enamel pre-etched with phosphoric acid

In this study, the influence of primer contamination on enamel bonding was analyzed. Adper Scotchbond Multi-Purpose (SMP), CLEARFIL SE Bond 2 (SE2), Scotchbond Universal (SBU) Adhesive, and Scotchbond Etchant (35% phosphoric acid; PA) were used. Ground bovine enamels were divided into eight groups based on the bonding protocols. The bonding interfaces after an acid-base challenge were observed via scanning electron microscopy to determine the acid-base resistant zone (ABRZ). Moreover, the bonding interfaces after the nanoleakage challenge were analyzed via energy-dispersive X-ray spectroscopy. ABRZ was observed in all the samples except PA_ONLY (applied PA etching, No primer and No adhesive resin). The funnel-shaped erosion was detected only in X_SBU (applied SBU without PA etching). The nanoleakage test revealed silver patterns in some groups. The nanoleakage, i.e., the penetration of the silver ions, was detected in the groups wherein primer was applied on PA-pre-etched enamel.

Randomized controlled clinical trial of a highly filled flowable composite in non-carious cervical lesions: 3-year results

OBJECTIVES

This prospective, randomized, split-mouth clinical trial assessed the 3-year clinical performance of a highly filled flowable composite and a conventional paste-type composite in non-carious cervical lesions (NCCLs).

MATERIALS AND METHODS

A total of 84 NCCLs in 27 subjects were included in this split-mouth design study and randomly divided into two groups: a highly filled flowable composite Clearfil Majesty ES Flow group (ES, n = 42) and a conventional paste-type composite Majesty group (MJ, n = 42). Clearfil SE Bond was used following the manufacturer's instructions. The restorations were evaluated at baseline (BL) and 1, 2, and 3 years using FDI (World Dental Federation) criteria. Data were analysed by a paired chi-squared test for intergroup comparisons and the Friedman test for intragroup comparisons (α = 0.05).

RESULTS

Both groups had a 97.3% retention rate at the 3-year evaluation. The acceptable scores (FDI scores 1-3) for each criterion exhibited no significant difference between the MJ and ES groups at any time point (p = 1.00). The marginal adaptation performance of ES was significantly better than that of MJ at every evaluation point (p < 0.05).

CONCLUSIONS

The 3-year clinical performance of ES in NCCLs was similar to that of MJ. When the restorations were clinically acceptable, ES showed better marginal adaptation than MJ.

CLINICAL RELEVANCE

Compared with conventional paste-type composites, highly filled flowable composites showed similar clinical performance and better marginal adaptation for restoring NCCLs after 3 years.

TRIAL REGISTRATION

TRN: ChiCTR1900028484 . Date of registration: December 22, 2019, retrospectively registered.

Bond durability of universal adhesives to intact enamel surface in different etching modes

This study aimed at determining the enamel bond durability of universal adhesives to intact enamel (IE) and ground enamel (GE) in different etching modes under thermal cycling (TC) and fatigue stresses. Two universal adhesives and a two-step self-etch adhesive were used. Enamel specimens were divided into four groups by treatment: (i) GE in etch-and-rinse, (ii) IE in etch-and-rinse, (iii) GE in self-etch, and (iv) IE in self-etch. Bonded specimens were subjected to TC, and then shear bond strengths (SBS) were conducted. SBS tests were also conducted after storage in 37°C water for 24 h (baseline). For shear fatigue strength (SFS) testing, bonded specimens were subjected to fatigue stress at a frequency of 10 Hz for 50,000 cycles. At baseline, all adhesives showed significantly higher SBS values with GE than IE in self-etch mode in contrast to in etch-and-rinse mode. After TC, the universal adhesives with IE showed lower SBS values than the baseline, regardless of the etching mode. Universal adhesives showed significantly lower SFS values with IE in etch-and-rinse, but not in self-etch mode. Phosphoric acid pre-etching or grinding of the aprismatic enamel may be helpful in establishing reliable initial and long-term bonds to enamel when using universal adhesives in self-etch mode.

Modelling ATR-FTIR Spectra of Dental Bonding Systems to Investigate Composition and Polymerisation Kinetics

Component ratios and kinetics are key to understanding and optimising novel formulations. This warrants investigation of valid methods. Attenuated Total Reflectance Fourier Transform Infra-Red (ATR)-FTIR spectra of separate primers/adhesives were modelled using summed spectra of solvents (water, ethanol), methacrylate monomers (HEMA (hydroxyethyl methacrylate), Bis-GMA (bisphenol A glycidyl methacrylate), and 10-MDP (10-methacryloyloxydecyl dihydrogen phosphate)), and fillers, multiplied by varying fractions. Filler loads were obtained following their separation from the adhesives, by analysing three repetitions (n = 3). Spectral changes during light exposure at 37 °C (20 s, LED 1100-1330 mW/cm2) were used to determine polymerisation kinetics (n = 3). Independent samples T-test was used for statistical analysis (significance level of 5%). FTIR modelling suggested a primer solvent percentage of OBFL (Optibond FL) (30%) was half that of CFSE (Clearfil SE 2) (60%). OBFL included ethanol and water, while CFSE included only water. Monomer peaks were largely those of HEMA with lower levels of phosphate monomers. OBFL/CFSE adhesive model spectra suggested that both contained equal volumes of Bis-GMA/HEMA, with CFSE having 10-MDP. Filler levels and spectra from OBFL (48 wt.%) and CFSE (5 wt.%) were different. Both systems reached a 50% conversion rate within seconds of light exposure. The final conversion for OBFL (74 ± 1%) was lower compared to CFSE (79 ± 2%) (p < 0.05). ATR-FTIR is a useful method to investigate relative levels of main components in bonding systems and their polymerisation kinetics. Such information is valuable to understanding such behaviour.

Adhesive dentistry: Current concepts and clinical considerations

OBJECTIVES

To address contemporary concepts in adhesive dental materials with emphasis on the evidence behind their clinical use.

OVERVIEW

Adhesive dentistry has undergone major transformations within the last 20 years. New dental adhesives and composite resins have been launched with special focus on their user-friendliness by reducing the number of components and/or clinical steps. The latest examples are universal adhesives and universal composite resins. While clinicians prefer multipurpose materials with shorter application times, the simplification of clinical procedures does not always result in the best clinical outcomes. This review summarizes the current evidence on adhesive restorative materials with focus on universal adhesives and universal composite resins.

CONCLUSIONS

(a) Although the clinical behavior of universal adhesives has exceeded expectations, dentists still need to etch enamel to achieve durable restorations; (b) there is no clinical evidence to back some of the popular adjunct techniques used with dental adhesives, including glutaraldehyde-based desensitizers and matrix metalloproteinase inhibitors; and (c) the color adaptation potential of new universal composite resins has simplified their clinical application by combining multiple shades without using different translucencies of the same shade.

CLINICAL SIGNIFICANCE

New adhesive restorative materials are easier to use than their predecessors, while providing excellent clinical outcomes without compromising the esthetic quality of the restorations.

Does Q-MIX pretreatment improve the dentin bond durability of a two-step self-etch adhesive?

This study aims to analyze and assess the effects of three particular dentin pretreatment solutions on the bond durability of a two-step self-etch adhesive (Optibond XTR) applied to dentin after ageing for 2 years. Thirty-five third molars which were extracted (n = 5 for μTBS, n = 2 for nanoleakage) were divided into five groups: Group 1:Control (no pretreatment), Group 2:17% EDTA, Group 3:2% CHX, Group 4:17% EDTA plus 2% CHX, Group 5: Q-Mix. After the pretreatments of dentin, the dentin adhesive was applied as per the guidelines provided by the manufacturer. Half of the specimens were subjected to μTBS tests for 24 hr, while the remaining half were subjected to the tests after being kept for 2 years in water storage. Also, nanoleakage was evaluated with FE-SEM by examining silver nitrate deposits. The data obtained were evaluated using a two-way analysis of variance and Tukey Post Hoc test. The dentin pretreatments did not affect the 24 hr and 2 years μTBS values for OptiBond XTR. At 24 hr, the EDTA + CHX group (50.3 ± 4.9) showed that the highest μTBS value was obtained. Water ageing significantly reduced the μTBS results and after 2 years the highest μTBS value was obtained from the Q-Mix group (37.7 ± 5.2). Different dentin pretreatments do not alter the 24-hr μTBS and were not able to preserve the bond strength after 2 years of ageing. Q-Mix was able to slow down the regression in the strength of the dentin bond as well as nanoleakage over time.

Current perspectives on dental adhesion: (1) Dentin adhesion - not there yet

The essential goal of any adhesive restoration is to achieve a tight and long-lasting adaptation of the restorative material to enamel and dentin. The key challenge for new dental adhesives is to be simultaneously effective on two dental substrates of conflicting nature. Some barriers must be overcome to accomplish this objective. While bonding to enamel by micromechanical interlocking of resin tags within the array of microporosities in acid-etched enamel can be reliably achieved and can effectively seal the restoration margins against leakage, bonding effectively and durably to organic and humid dentin is the most puzzling task in adhesive dentistry.

Much of the research and development of dental adhesives has focused on making the clinical procedure more user-friendly by reducing the number of bottles and/or steps. Although clinicians certainly prefer less complicated and more versatile adhesive materials, there is a trade-off between simplification of dental adhesives and clinical outcomes. Likewise, new materials are launched with claims of being novel and having special properties without much supporting evidence.

This review article discusses dental adhesion acknowledging pioneer work in the field, highlights the substrate as a major challenge to obtain durable adhesive restorations, as well as analyzes the three adhesion strategies and their shortcomings. It also reviews the potential of chemical/ionic dental adhesion, discusses the issue of extensively published laboratory research that does not translate to clinical relevance, and leaves a few thoughts in regard to recent research that may have implications for future adhesive materials.

Composite restorations placed in non-carious cervical lesions-Which cavity preparation is clinically reliable?

The purpose of this in-vivo study was to evaluate the clinical performance of restorations placed in non-carious cervical lesions (NCCLs), using different cavity preparation designs, after 7.7 years. A total of 85 NCCLs with coronal margins in enamel and cervical margins in dentin were randomly assigned to the following treatment protocols: dentin surface cleaning, dentin surface roughening with round bur plus flowable composite, dentin surface roughening/cervical groove preparation with round bur, dentin surface roughening/cervical groove preparation with round bur plus flowable composite. After enamel beveling and selective enamel etching, the defects were restored with composite. The restorations were assessed by two independent, calibrated and blinded investigators, using modified USPHS criteria. At 7 years (7.7 (± 0.35)), a total of 64 restorations (75.3%) were available for follow-up examination. The total retention rate, irrespective of the test groups, was 82.8%. Restorations placed without any preparation showed the highest loss rate (27.8%). Esthetic appearance, marginal adaptation, anatomic form and marginal discoloration did not differ significantly between the groups. Composites are long-term stable materials for restoring NCCLs. Restorations placed without any dentin preparation (cavity cleaning only) showed the highest loss rate.

Clinical Evaluation of Noncarious Cervical Lesions of Different Extensions Restored With Bulk-fill or Conventional Resin Composite: Preliminary Results of a Randomized Clinical Trial

PURPOSE

This randomized clinical trial evaluated the influence of the occlusogingival distance (OGD) of noncarious cervical lesions (NCCLs) on the clinical performance of a regular bulk-fill resin composite and a regular nanofilled resin composite.

METHODS AND MATERIALS

A total of 140 restorations were randomly placed in 77 participants by one operator. NCCLs were divided into four groups (n=35) according to OGD (1.5 mm±10% or 3 mm±10%) and resin composites (Filtek Bulk Fill Posterior [B] or Filtek Z350 XT [C]) used: 1.5 mm-B, 1.5 mm-C, 3 mm-B, and 3 mm-C. A two-step self-etch adhesive (Clearfil SE Bond) was applied following manufacturer instructions in all restorative procedures. Restorations were polished 1 week after placement. Clinical evaluation was performed at baseline (7 days), 6 months, and 1 year by two calibrated examiners, according to the modified US Public Health Service criteria evaluating fractures/retention, marginal staining, marginal adaptation, recurrence of caries, anatomic form, postoperative sensitivity, and surface texture. The Kruskal-Wallis test was used for intergroup comparison in each follow-up; the Friedman analysis of variance, followed by the least significant difference test (multiple comparisons) was used for intragroup comparison between baseline and follow-up times (α=0.05).

RESULTS

Two restorations were lost at 12 months (1 for 1.5 mm-B and 1 for 3 mm-B). The retention rates at 12 months were 100% for 1.5 mm-C, 97% for 1.5 mm-B, 100% for 3 mm-C; and 97% for 3 mm-B, with no statistical difference among the groups (p=0.570). At 12 months, a statistically significant difference was found among the follow-up times for the same group (1.5 mm-B, 1.5 mm-C, and 3 mm-B) regarding the marginal staining criterion; moreover, the 3 mm-C group showed a significant difference from 6 months. No significant difference was found for the other parameters.

CONCLUSION

Both resin composites showed acceptable clinical performance, and the OGD of NCCLs did not influence the clinical performance of resin composite restorations after 12 months.

Multi-Mode adhesives performance and success/retention rates in NCCLs restorations: randomised clinical trial one-year report

Aim: Compare clinical performance and success/retention rates of two multi-mode (MM) adhesives, applied in self-etch (SE) or etch-and-rinse (ER) modes, with SE-all-in-one adhesive (SE/SE with enamel etching) in NCCL restorations at one-year follow-up.

Material and methods: Prospective, double-blind RCT approved by the University Fernando Pessoa and the National-Clinical-Research-Ethics Committees (CEIC-20150305), ClinicalTrials.gov registered (NCT02698371), in 38 participants with 210 restorations (AdmiraFusion^®) randomly allocated to six groups (Adhesives_Adhesion mode), each with 35 restorations: G1-Control Futurabond^®DC_SE; G2-Control Futurabond^®DC_SE with enamel etching; G3-Futurabond^®U_ER; G4-Futurabond^®U_SE; G5-Adhese^®Universal_ER; G6-Adhese^®Universal_SE. Restorations evaluated at baseline and one-year by three calibrated examiners (ICC ≥0.952) using FDI criteria and statistical analysis with nonparametric tests (alpha = 0.05).

Results: At one-year recall 36 participants, 199 restorations were available for examination; five (2.5%) restorations (G1 n = 2; G2, G3, G4 n = 1) were lost due to retention (p > .05); G1 showed less satisfying marginal adaptation (p < .05) than G2 and MM adhesives groups, particularly G6. Overall success rates (p > .05) were: 93.9% (G1), 97.0% (G2; G3; G4) and 100.0% (G5; G6).

Conclusions: MM adhesives (Futurabond^®U and Adhese^®Universal) showed similar and acceptable performance/success rates but also better clinical outputs than the SE-all-in-one adhesive (Futurabond^®DC), particularly in SE mode. Success and retention rates were similar and not dependent on materials or adhesion modes.

Atomic level observation and structural analysis of phosphoric-acid ester interaction at dentin

The functional monomer 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP), used in many dental adhesives, self-assembles in nano-layers at adhesive-tooth interfaces. Recently, several states of the POH groups of 10-MDP_Ca salts were suggested, while their actual status has not been elucidated yet. We mechanistically investigated 10-MDP_Ca-salt nano-layering at adhesive-dentin interfaces, correlatively using scanning transmission electron microscopy with energy-dispersive X-ray spectrometry (STEM-EDS), X-ray diffraction (XRD) and solid state nuclear magnetic resonance (NMR). STEM-EDS confirmed the presence of Ca and P in each nano-layer. Both XRD and NMR revealed that the two terminal POH groups of 10-MDP reacted with Ca. This twofold POH interaction of 10-MDP with Ca was stable in water and is therefore expected to contribute to durable nano-layering of 10-MDP_Ca salts in the hybrid and adhesive layer. STATEMENT OF SIGNIFICANCE: The functional monomer 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP), commonly used in dental adhesives with favorable long-term clinical outcome, has been documented to self-assemble into nano-layers at adhesive-tooth interfaces. Characterizing ultra-morphologically (STEM) and chemically (STEM-EDS, XRD, NMR) the mechanisms of interaction of 10-MDP with bulk dentin in a similar manner as what occurs clinically, it was found that the water stable 10-MDP_Ca salts consist of CaRPO₄, meaning that the two OH groups of the phosphate group of 10-MDP ionically reacted with Ca. This stable structure is expected to contribute to durable nano-layering of 10-MDP_Ca salts in the hybrid and adhesive layer and hence to clinical longevity of the adhesively bonded tooth restoration.

HF etching of CAD/CAM materials: influence of HF concentration and etching time on shear bond strength

Background

The required pretreatment of CAD/CAM ceramic materials before resin composite cement application varies among studies. The aim of the present study was to evaluate the effect of hydrofluoric acid concentration and etching time on the shear bond strength (SBS) of two adhesive and two self-adhesive resin composite cements to different CAD/CAM ceramic materials.

Methods

SBS of two adhesive (Panavia V5, Kuraray, [PV5]; Vita Adiva F-Cem, Vita Zahnfabrik, [VAF]) and two self-adhesive (RelyX Unicem 2 Automix, 3 M Espe, [RUN]; Vita Adiva S-Cem, Vita, [VAS]) cements to four different CAD/CAM materials (Vitablocs Mark II, Vita, [VM]; Vita Enamic, Vita, [VE]; e.max CAD, Ivoclar Vivadent, [EC]; Vita Suprinity PC, Vita, [VS]) was measured. The effect of the surface pretreatment by using two different hydrofluoric acid products (HF5% Vita Ceramics Etch, Vita and HF9% buffered, Ultradent Porcelain Etch, Ultradent Products) were assessed at etching times of 0 s, 5 s, 15 s, 30s and 60s for each cement and restorative material combination (n = 10 per group, total n = 1440).

Results

Significant effects were found for the etching time and cement for all materials with highest shear bond strength for etching times of 60s = 30s = 15 s ≥ 5 s > 0 s and for RUN>PV5 = VAF > VAS (p < 0.05). Etching with HF5% for 5 s to 15 s resulted in higher SBS values, while no differences were observed between HF5% and HF9% buffered when the substrates were etched for 30s to 60s (p < 0.05).

Conclusions

Within the limitations of this study the recommended surface pretreatment of silicate ceramics is HF etching with concentrations of 5% or 9% for 15 s to 60s to achieve highest shear bond strength while the glassy matrix is sufficiently dissolved. The tested resin composite cements can be applied with all tested materials and suggested for clinical application.

Twenty-four-month clinical performance of different universal adhesives in etch-and-rinse, selective etching and self-etch application modes in NCCL - a randomized controlled clinical trial

Objective

The aim of this randomized, controlled, prospective clinical trial was to evaluate the performances of two different universal adhesives and one etch-rinse adhesive for restoration of non-carious cervical lesions (NCCLs).

Material and Methods

Twenty patients with at least seven NCCLs were enrolled. Lesions were divided into seven groups according to adhesive systems and application modes: GSE: GLUMA Universal-self-etch, GSL: GLUMA Universal-selective etching, GER: GLUMA Universal-etch-and-rinse, ASE: All-Bond Universal-self-etch, ASL: All-Bond Universal-selective etching, AER: All-Bond Universal-etch-and-rinse, SBE (Control): Single Bond2-etch-and-rinse. A total of 155 NCCLs were restored with a nano hybrid composite (Tetric N-Ceram). Restorations were scored with regard to retention, marginal discoloration, marginal adaptation, recurrent caries and post-operative sensitivity using modified United States Public Health Service (USPHS) criteria after one week, 6, 12 and 24 months. Statistical evaluations were performed using Chi-square tests (p=0.05).

Results

The recall rate was 81.9% after the 24-month follow-up. The cumulative retention rates for self-etch groups (GSE: 72.2%, ASE:75%) were significantly lower than other experimental groups (GSL: 93.7%, GER: 100%, ASL: 94.1%, AER: 100%, SBE: 100%) at the 24-month follow-up (p<0.05). Regarding marginal adaptation and marginal discoloration, GSE and ASE groups demonstrated more bravo scores after 6 and 12-month observations but differences were not significant (p>0.05). Only one restoration from ASL group demonstrated post-operative sensitivity at 6 and 12-month observations. No secondary caries was observed on the restorations at any recall. At the end of 24-month observations, no significant differences were detected among groups regarding any of the criteria assessed, except retention.

Conclusion

GLUMA Universal and All-Bond Universal showed better results in etch-and-rinse and selective etching mode compared to the self-etch mode regarding retention. Etch-and-rinse and selective etching application modes of the current universal adhesives tended to provide better clinical outcomes considering the criteria evaluated at the end of 24-month evaluation.

Gradual dehydration affects the mechanical properties and bonding outcome of adhesives to dentin

This study evaluated the effects of dehydration on the mechanical properties of adhesive resins and dentin, and on the microtensile bond strength (µTBS) of adhesives. Third molars were randomly bonded with Clearfil Mega Bond (MB) or Clearfil SE Bond 2 (SE). After water-storage (37°C; 24 h), µTBS was obtained in 'wet' (tested after 5 min of removal from storage) and 'dehydrated' (tested after 10, 15 min and 24 h) conditions by a universal tester (crosshead speed: 1 mm/min). Data were analyzed by two-way ANOVA and Duncan's test. Hardness (H), Elastic modulus (E) and weight-loss of dentin beams and adhesive-resin discs were also monitored over time and analyzed by one-way repeated measures ANOVA and Bonferroni's test (α=0.05). Significant differences in bond strength were observed for adhesives and for conditions. Except for dentin's E, dehydration caused significant gradual changes in the H, E and weight of adhesive resins and dentin (p<0.05).

The effect of five different universal adhesives on the clinical success of class I restorations: 24-month clinical follow-up

OBJECTIVES

The aim of this study was to evaluate the 24-month clinical performance of universal adhesives on the restoration success of Class I carious lesions.

MATERIALS AND METHODS

Five different universal adhesives (Gluma Bond Universal (GU), Clearfil Universal (CU), Prime&Bond Elect Universal (PU), All bond Universal (AU), and Single Bond Universal (SU)) were used in the self-etch and etch-and-rinse modes in 42 patients. The study was conducted with 10 groups, with 20 restorations in each group. The restorations were evaluated at baseline and during a 24-month recall using World Dental Federation (FDI) and the US Public Health Service (USPHS) criteria. The changes in the parameters were analyzed using the chi-square test.

RESULTS

At the end of 24 months, there was no loss of restoration in any group. According to the USPHS, there was no difference in the baseline and 24-month clinical behavior of the restorations (P ˃ 0.05). However, according to the FDI, when adhesives were used in the self-etch mode, three adhesives (GU, SU, PU) showed marginal incompatibility, and one adhesive showed (GU) marginal discoloration between baseline and the 24-month follow-up evaluation (P < 0.05). There was no significant difference after 24 months between etch-and-rinse and self-etch groups according to the results based on both the USPHS and FDI criteria (P ˃ 0.05).

CONCLUSIONS

The 24-month clinical performance of the evaluated universal adhesives depends on the adhesive strategy.

CLINICAL RELEVANCE

This study helps clinicians to decide in which mode (etch-and-rinse or self-etch) universal adhesives can be safely used.

Do universal adhesives promote bonding to dentin? A systematic review and meta-analysis

Objectives

The aims of this study were to conduct a systematic review of the microtensile bond strength (µTBS) of multi-mode adhesives to dentin and to perform a meta-analysis to assess the significance of differences in the µTBS of one of the most commonly used universal adhesives (Scotchbond Universal, 3M ESPE) depending on whether the etch-and-rinse or self-etch mode was used.

Materials and Methods

An electronic search was performed of MEDLINE/PubMed, ScienceDirect, and EBSCOhost. Laboratory studies that evaluated the µTBS of multi-mode adhesives to dentin using either the etch-and-rinse or self-etch mode were selected. A meta-analysis was conducted of the reviewed studies to quantify the differences in the µTBS of Scotchbond Universal adhesive.

Results

Only 10 studies fulfilled the inclusion criteria for the systematic review. Extensive variation was found in the restorative materials, testing methodologies, and failure mode in the reviewed articles. Furthermore, variation was also observed in the dimensions of the microtensile testing beams. The meta-analysis showed no statistically significant difference between the etch-and-rinse and self-etch modes for Scotchbond Universal adhesive (p > 0.05).

Conclusions

Multi-mode ‘universal’ adhesives can achieve substantial bonding to dentin, regardless of the used modes (either etch-and-rinse or self-etch).

One-year clinical evaluation of bulk-fill flowable vs. regular nanofilled composite in non-carious cervical lesions

OBJECTIVE

The aim of this double-blind, randomized trial was to evaluate the 1-year clinical performance of a bulk-fill flowable and a regular nanofilled composite in non-carious cervical lesions (NCCLs).

METHODS

Twenty-two subjects with at least two NCCLs were enrolled in the study. A total of 89 restorations were performed by a single operator using Filtek Supreme (FS) Ultra Universal or Filtek Bulk (FB) Fill Flowable. A universal adhesive (Scotchbond™ Universal Adhesive) was used with a self-etching approach in dentin. The restorations were evaluated by two independent and previously calibrated examiners at baseline (7 days), 6 months and 1 year, according to the USPHS modified criteria. Mann-Whitney U test was used to analyze the differences between composites and Wilcoxon signed rank test for comparisons between the baseline and follow-ups (α = 5%).

RESULTS

One restoration was considered clinically unacceptable due to loss of retention after 6 months in the FS group. FS presented statistically high scores for surface roughness when compared to FB after 1 year (p < 0.05), but both were considered clinically acceptable. After 1 year, the frequency of clinically unacceptable rates was 3.3% for anatomical form in the FB group, 1.1% for retention in the FS group, and 2.2% for marginal adaptation in both groups. All restorations, in both groups, presented score 0 over the 1-year period for marginal staining, postoperative sensitivity, and secondary caries.

CONCLUSION

Both composite resins showed acceptable clinical performances for the restoration of NCCLs after 1 year.

CLINICAL RELEVANCE

Both bulk-fill flowable and regular nanofilled composites showed good clinical performances for the restoration of NCCLs after 1 year.