Photodynamic inactivation of Streptococcus mutans by curcumin in combination with EDTA

Reduction of microorganisms in carious dentin by photodynamic therapy mediated by potassium iodide added to methylene blue and red laser

OBJECTIVE

To evaluate the effect of the association of potassium iodide to antimicrobial photodynamic therapy on human carious dentin produced with a microcosm biofilm model.

METHODS

A microcosm biofilm model was used to generate a caries lesion on human dentin. Pooled human saliva diluted with glycerol was used as an inoculum on specimens immersed on McBain artificial saliva enriched with 1 % sucrose (24 h at 37 °C in 5 % CO2). After refreshing culture media for 7 days, the dentin specimens were divided in 5 groups (3 specimens per group, in triplicate; n = 9): C (NaCl 0.9 %), CX (2 % chlorhexidine), PKI (0.01 % methylene blue photosensitizer+50 mM KI), L (laser at 15 J, 180 s, 22.7 J/cm2), and PKIL (methylene blue + KI + Laser). After the treatments, dentin was collected, and a 10-fold serial dilution was performed. The number of total microorganisms, total lactobacilli, total streptococci, and Streptococcus mutans was analyzed by microbial counts (CFU/mL). After normality and homoscedasticity analysis, the Welch's ANOVA and Dunnett's tests were used for CFU. All tests used a 5 % significance level.

RESULTS

CX and PKIL groups showed significant bacterial decontamination of dentin, compared to group C (p < 0.05) reaching reductions up to 3.8 log10 for CX for all microorganisms' groups and PKIL showed 0.93, 1.30, 1.45, and 1.22 log10 for total microorganisms, total lactobacilli, total streptococci, and S. mutans, respectively.

CONCLUSION

aPDT mediated by the association of KI and methylene blue with red laser reduced the viability of microorganisms from carious dentin and could be a promising option for cavity decontamination.

Prediction of microbe-drug associations based on a modified graph attention variational autoencoder and random forest

Introduction

The identification of microbe-drug associations can greatly facilitate drug research and development. Traditional methods for screening microbe-drug associations are time-consuming, manpower-intensive, and costly to conduct, so computational methods are a good alternative. However, most of them ignore the combination of abundant sequence, structural information, and microbe-drug network topology.

Methods

In this study, we developed a computational framework based on a modified graph attention variational autoencoder (MGAVAEMDA) to infer potential microbedrug associations by combining biological information with the variational autoencoder. In MGAVAEMDA, we first used multiple databases, which include microbial sequences, drug structures, and microbe-drug association databases, to establish two comprehensive feature matrices of microbes and drugs after multiple similarity computations, fusion, smoothing, and thresholding. Then, we employed a combination of variational autoencoder and graph attention to extract low-dimensional feature representations of microbes and drugs. Finally, the lowdimensional feature representation and graphical adjacency matrix were input into the random forest classifier to obtain the microbe-drug association score to identify the potential microbe-drug association. Moreover, in order to correct the model complexity and redundant calculation to improve efficiency, we introduced a modified graph convolutional neural network embedded into the variational autoencoder for computing low dimensional features.

Results

The experiment results demonstrate that the prediction performance of MGAVAEMDA is better than the five state-of-the-art methods. For the major measurements (AUC =0.9357, AUPR =0.9378), the relative improvements of MGAVAEMDA compared to the suboptimal methods are 1.76 and 1.47%, respectively.

Discussion

We conducted case studies on two drugs and found that more than 85% of the predicted associations have been reported in PubMed. The comprehensive experimental results validated the reliability of our models in accurately inferring potential microbe-drug associations.

Nanomaterial-based drug-delivery system as an aid to antimicrobial photodynamic therapy in treating oral biofilm

Diverse microorganisms live as biofilm in the mouth accounts for oral diseases and treatment failure. For decades, the prevention and treatment of oral biofilm is a global challenge. Antimicrobial photodynamic therapy (aPDT) holds promise for oral biofilm elimination due to its several traits, including broad-spectrum antimicrobial capacity, lower possibility of resistance and low cytotoxicity. However, the physicochemical properties of photosensitizers and the biological barrier of oral biofilm have limited the efficiency of aPDT. Nanomaterials has been used to fabricate nanocarriers to improve photosensitizer properties and thus enhance antimicrobial effect. In this review, we have discussed the challenges of aPDT used in dentistry, categorized the nanomaterial-delivery system and listed the possible mechanisms involved in nanomaterials when enhancing aPDT effect.

Osseointegration of photodynamic active biomaterials for bone regeneration in an animal bone model over a period of 12 months

OBJECTIVES

Previous efforts led to the development of two different polymeric biomaterials for periodontal regeneration with antibacterial photodynamic surface activity. The present study aimed to investigate osseointegration and bone formation of both materials in an ovine model.

METHODS

Both biomaterials: 1) urethane dimethacrylate-based Biomaterial 1 (BioM1) and 2) tri-armed oligoester-urethane methacrylate-based Biomaterial 2 (BioM2) are enriched with beta-tri-calcium phosphate and the photosensitizer meso-tetra(hydroxyphenyl)chlorin (mTHPC). These materials were implanted in non-critical size bone defects in the sheep femur (n = 16) and tibia (n = 8). Empty defects served as controls (n = 16). Polyfluorochrome sequential bone labeling was carried out at baseline and after 3, 6, and 12 months. Animals were sacrificed after 12 months. Bone specimens (n = 40) were fixed and subjected to microtomographic analysis (µCT) for the evaluation of the bone-volume-fraction (BV/TV), trabecular number and trabecular thickness. Subsequently, histological sections were arranged and polyfluorochrome sequential bone labeling was analyzed by confocal laser scanning microscopy (cLSM).

RESULTS

cLSM analysis revealed that highest remodeling and bone formation activity occurred during the second half of the study period (6-12 months). Bone formation in the tibia was significantly lower for the control (2.71 ± 1.26%) as compared to BioM1 (6.01 ± 2.99%) and BioM2 (6.45 ± 2.12%); (p = 0.006, p = 0004). Micro-computed tomography revealed a BV/TV volume fraction of 44.72 ± 9.01% in femur defects filled with BioM1 which was significantly higher compared to the control (32.27 ± 7.02%; p = 0.01). Bone architecture (trabecular number, trabecular thickness) did not significantly differ from the self-healed defects.

SIGNIFICANCE

Both biomaterials, especially BioM1 showed good osseointegration and bone formation characteristics and can be recommended for further examination in periodontal regeneration studies.

Antimicrobial photodynamic therapy against oral biofilm: influencing factors, mechanisms, and combined actions with other strategies

Oral biofilms are a prominent cause of a wide variety of oral infectious diseases which are still considered as growing public health problems worldwide. Oral biofilms harbor specific virulence factors that would aggravate the infectious process and present resistance to some traditional therapies. Antimicrobial photodynamic therapy (aPDT) has been proposed as a potential approach to eliminate oral biofilms via in situ-generated reactive oxygen species. Although numerous types of research have investigated the effectiveness of aPDT, few review articles have listed the antimicrobial mechanisms of aPDT on oral biofilms and new methods to improve the efficiency of aPDT. The review aims to summarize the virulence factors of oral biofilms, the progress of aPDT in various oral biofilm elimination, the mechanism mediated by aPDT, and combinatorial approaches of aPDT with other traditional agents.

Smart dental materials for antimicrobial applications

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

Identification of the antibacterial action mechanism of curcumin on Streptococcus mutans through transcriptome profiling

OBJECTIVE

The purpose of this study was to explore the effect and mechanism responsible for how curcumin affects the biofilm formation by Streptococcus mutans (S. mutans).

DESIGN

The antibacterial activity of curcumin was evaluated by measuring the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC). The mass of the biofilm was measured by crystal violet staining. Transcriptome sequencing was used to obtain all the transcript information associated with the biological activity of curcumin-treated S. mutans. Real-time quantitative PCR (qRT-PCR) was performed to examine the expression levels of related biofilm formation genes.

RESULTS

The MIC value for curcumin was 64 μM. Curcumin inhibited the formation of a biofilm by S. mutans and degraded mature biofilms. A gene ontology enrichment analysis showed that the DEGs were significantly relevant to biofilm formation. In addition, 17 significantly enriched Kyoto Encyclopedia of Genes and Genomes pathways (p ≤ 0.01) were identified and were potentially associated with the biochemical metabolic processes of S. mutans. DEGs associated with the biofilm formation of S. mutants, including gtfB, gtfC, rgpG, spaP, spxA1, spxA2, bacA, lrgB, and gshAB. The qRT-PCR results were consistent with transcriptome sequencing that the expression levels of gtfB, gtfC, rgpG, and spaP significantly decreased in the curcumin-treated group, whereas the expression levels of spx1, spx2, bacA, lrgB, and gshAB were up-regulated.

CONCLUSIONS

Curcumin showed marked inhibitory effects against the formation of biofilms by S. mutans and degradation of formed biofilms.

Quercetin mediated antimicrobial photodynamic treatment using blue light on Escherichia coli O157:H7 and Listeria monocytogenes

Interest in using an antimicrobial photodynamic treatment (aPDT) for the microbial decontamination of food has been growing. In this study, quercetin, a substance found ubiquitously in plants, was used as a novel exogenous photosensitizer with 405 nm blue light (BL) for the aPDT on foodborne pathogens, and the inactivation mechanism was elucidated. The inactivation of Escherichia coli O157:H7 and Listeria monocytogenes in PBS solution by the quercetin and BL combination treatment reached a log reduction of 6.2 and more than 7.55 at 80 J/cm² (68 min 21 s), respectively. When EDTA was added to investigate the reason for different resistance between two bacteria, the effect of aPDT was enhanced against E. coli O157:H7 but not L. monocytogenes. This result indicated that the lipopolysaccharide of Gram-negative bacteria operated as a protective barrier. It was experimentally demonstrated that quercetin generated the superoxide anion and hydrogen peroxide as the reactive oxygen species that oxidize and inactivate cell components. The damage to the bacterial cell membrane by aPDT was evaluated by propidium iodide, where the membrane integrity significantly (P < 0.05) decreased from 40 J/cm² compared to control. In addition, DNA integrity of bacteria was significantly (P < 0.05) more decreased after aPDT than BL treatment. The inactivation results could be applied in liquid food industries for decontamination of foodborne pathogens, and the mechanisms data was potentially utilized for further studies about aPDT using quercetin.

Antibacterial activity of curcumin and its essential nanoformulations against some clinically important bacterial pathogens: A comprehensive review

Multidrug-resistant bacterial infections can kill 700,000 individuals globally each year and is considered among the top 10 global health threats faced by humanity as the arsenal of antibiotics is becoming dry and alternate antibacterial molecule is in demand. Nanoparticles of curcumin exhibit appreciable broad-spectrum antibacterial activity using unique and novel mechanisms and thus the process deserves to be reviewed and further researched to clearly understand the mechanisms. Based on the antibiotic resistance, infection, and virulence potential, a list of clinically important bacteria was prepared after extensive literature survey and all recent reports on the antibacterial activity of curcumin and its nanoformulations as well as their mechanism of antibacterial action have been reviewed. Curcumin, nanocurcumin, and its nanocomposites with improved aqueous solubility and bioavailability are very potential, reliable, safe, and sustainable antibacterial molecule against clinically important bacterial species that uses multitarget mechanism such as inactivation of antioxidant enzyme, reactive oxygen species-mediated cellular damage, and inhibition of acyl-homoserine-lactone synthase necessary for quorum sensing and biofilm formation, thereby bypassing the mechanisms of bacterial antibiotic resistance. Nanoformulations of curcumin can thus be considered as a potential and sustainable antibacterial drug candidate to address the issue of antibiotic resistance.

Antimicrobial photodynamic therapy as an adjunctive treatment to ultrasound for the dentin caries-like lesion removal

OBJECTIVE

To evaluate in vitro the efficacy of ultrasound device to remove caries-like dentin and the curcumin-mediated antimicrobial photodynamic therapy (aPDT) to decontaminate the affected dentin.

METHODS

Bovine dentin specimens (n = 173) of 4 × 4 × 2 mm were first submitted to Knoop surface microhardness to standardize the specimens (29 ± 3 KHN). Artificial caries lesion was induced by Streptococcus mutans strain by biological model for 7 days. Infected dentin was removed (1 min) with the following techniques: dentin excavator, bur at low-speed rotation and ultrasound device. After that, aPDT application was performed using blue LED under 460 nm. Polarized light microscopy (PLM), removal rate (n = 10), cross-sectional microhardness (n = 10), colony forming units per milliliter (CFU) (n = 9) and confocal laser microscopy (CM) (n = 2) were performed. ANOVA with Welch correction, post-hoc Games-Howell and two-way ANOVA followed by Tukey's post-hoc tests were used.

RESULTS

PLM confirmed the caries lesion formation with a depth of ∼147.9 µm. Groups treated with ultrasound showed lower removal rate (p = 0.001). Regardless of the treatment, the microhardness values increased as function of depth (p ≤ 0.05). Carbide bur showed the highest microhardness value, followed by ultrasound and excavator. CFU and CM showed a significant reduction in S. mutans after aPDT application.

CONCLUSION

Ultrasound was efficient, since it removed infected dentin, preserving the affected dentin and aPDT can be used as a complementary therapy to decontaminate the affected dentin.

CLINICAL SIGNIFICANCE

Ultrasound device may help the clinician to remove dentin caries-like lesions since it is a conservative technique and provided the removal of infected dentin, preserving the affected dentin. aPDT application may be used as a complimentary technique to promote antibacterial effect and possibly minimize the risk of secondary caries.

Photodynamic Inactivation of Bacteria in Ionic Environments Using the Photosensitizer SAPYR and the Chelator Citrate

Many studies show that photodynamic inactivation (PDI) is a powerful tool for the fight against pathogenic, multi-resistant bacteria and the closing of hygiene gaps. However, PDI studies have been frequently performed under standardized in vitro conditions comprising artificial laboratory settings. Under real life conditions, however, PDI encounters substances like ions, proteins, amino acids, and fatty acids, potentially hampering the efficacy PDI to an unpredictable extent. Thus, we investigated PDI with the phenalene-1-one based photosensitizer SAPYR against Escherichia coli and Staphylococcus aureus in the presence of calcium or magnesium ions, which are ubiquitous in potential fields of PDI applications like in tap water or on tissue surfaces. The addition of citrate should elucidate the potential as a chelator. The results indicate that PDI is clearly affected by such ubiquitous ions depending on its concentration and the type of bacteria. The application of citrate enhanced PDI especially for Gram-negative bacteria at certain ionic concentrations (e.g. CaCl₂ or MgCl₂ : 7.5 to 75 mmol l^-1 ). Citrate also improved PDI efficacy in tap water (especially for Gram-negative bacteria) and synthetic sweat solution (especially for Gram-positive bacteria). In conclusion, the use of chelating agents like citrate may facilitate the application of PDI under real life conditions.

The Natural Product Curcumin as an Antibacterial Agent: Current Achievements and Problems

The rapid spread of antibiotic resistance and lack of effective drugs for treating infections caused by multi-drug resistant bacteria in animal and human medicine have forced us to find new antibacterial strategies. Natural products have served as powerful therapeutics against bacterial infection and are still an important source for the discovery of novel antibacterial drugs. Curcumin, an important constituent of turmeric, is considered safe for oral consumption to treat bacterial infections. Many studies showed that curcumin exhibited antibacterial activities against Gram-negative and Gram-positive bacteria. The antibacterial action of curcumin involves the disruption of the bacterial membrane, inhibition of the production of bacterial virulence factors and biofilm formation, and the induction of oxidative stress. These characteristics also contribute to explain how curcumin acts a broad-spectrum antibacterial adjuvant, which was evidenced by the markedly additive or synergistical effects with various types of conventional antibiotics or non-antibiotic compounds. In this review, we summarize the antibacterial properties, underlying molecular mechanism of curcumin, and discuss its combination use, nano-formulations, safety, and current challenges towards development as an antibacterial agent. We hope that this review provides valuable insight, stimulates broader discussions, and spurs further developments around this promising natural product.

Hydrogen peroxide potentiates antimicrobial photodynamic therapy in eliminating Candida albicans and Streptococcus mutans dual-species biofilm from denture base

BACKGROUND

Candida albicans (C.albicans) is the primary pathogen of denture biofilm. Moreover, it could establish a cross-kingdom relationship with bacteria to enhance its virulence and resistance to antifungal drugs. This study aimed to investigate the efficacy of antimicrobial photodynamic therapy (aPDT) in combination with hydrogen peroxide (H₂O₂) against C.albicans and Streptococcus mutans (S.mutans) dual-species biofilm formed on polymethyl methacrylate (PMMA) disk, and explore its involved mechanisms.

METHODS

C.albicans and S.mutans were grown on PMMA disk for 48 h to form biofilm and received different treatments. The treatments included:1) phosphate-buffered saline (PBS) group,2) 100 mM H₂O₂ group,3) aPDT group,4) aPDT+ H₂O₂ and 5) H₂O₂+aPDT group. Colony forming units (CFU), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), and scanning electron microscope (SEM) were used to evaluate the antimicrobial effects. Extracellular polysaccharide substance (EPS) production and observation, cell permeability of biofilm, and uptake of toluidine blue O (TBO) by biofilm were assessed to investigate the involved mechanism.

RESULTS

There was no significant difference between PBS group and H₂O₂ group in viable microorganisms and metabolic activity of biofilm. The treatment protocols containing aPDT group reduced microorganism numbers and metabolic activity when compared to PBS group or H₂O₂ group (P<0.05). H₂O₂+aPDT treatment showed the highest antimicrobial efficacy in comparison with other treatments (P<0.05). Pretreatment with H₂O₂ could decrease EPS production and enhance cell permeability, leading to increased TBO uptake in biofilm.

CONCLUSION

Pretreatment with H₂O₂ improved aPDT efficiency in eliminating dual-species biofilm from PMMA disk by reducing EPS amount, enhancing cell permeability, and increasing TBO uptake.

Enhancement of photodynamic bactericidal activity of curcumin against Pseudomonas Aeruginosa using polymyxin B

BACKGROUND

Pseudomonas aeruginosa (P. aeruginosa) is an emerging opportunistic pathogen, which can cause bacterial skin diseases such as green nail syndrome, interdigital infections and folliculitis. Curcumin-mediated antimicrobial photodynamic therapy (aPDT) has been demonstrated as a promising therapeutic option for the treatment of skin infection though its inactivation of gram-negative bacteria such as P. aeruginosa.

MATERIALS AND METHODS

In the present study, we examined the adjuvant effect of polymyxin B on the antibacterial activity of curcumin-mediated aPDT against P. aeruginosa. P. aeruginosa was treated with curcumin in the presence of 0.1-0.5 mg/L polymyxin B and irradiated by blue LED light (10 J/cm²). Bacterial cultures treated with curcumin alone served as controls. Colony forming units (CFU) were counted and the viability of P. aeruginosa was calculated after aPDT treatment. The possible underlying mechanisms for the enhanced killing effects were also explored.

RESULTS

The killing effects of curcumin-mediated aPDT against P. aeruginosa was significantly enhanced by polymyxin B (over 2-log reductions). Moreover, it was also observed that addition of polymyxin B in the curcumin-mediated aPDT led to the apparent bacterial membrane damage with increased leakage of cytoplasmic contents and extensive DNA and protein degradation.

DISCUSSION

The photodynamic action of curcumin against P. aeruginosa could be significantly enhanced by the FDA-approved drug polymyxin B. Our results highlight the potential of introducing polymyxin B to enhance the effects of aPDT treatment against gram-negative skin infections, in particular, P. aeruginosa.

Photo-enhanced antibacterial activity of polydopamine-curcumin nanocomposites with excellent photodynamic and photothermal abilities

Background and objective Photodynamic therapy (PDT) and photothermal therapy (PTT) have gradually become options for select anti-tumor and antibacterial treatment . The combination of PDT and PTT show great research value, which may greatly improve the curative effect. The aim of the present study was to prepare a compound system of polydopamine and curcumin (PDA-Cur nanocomposites) with excellent antibacterial effect towards Gram-positive and Gram-negative bacteria. Methods Dopamine hydrochloride was oxidized and self polymerized in alkaline condition to form PDA-Cur nanocomposites. The structure and morphology of PDA-Cur were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), laser scattering microscopy (LSM), ultraviolet spectrophotometer (UV-vis), infrared spectroscopy (IR) and fluorescence emission spectrometer. Using 1,1-diphenyl-2-picrylhydrazyl radical (DPPH), 1,3-diphenylbenzofuran (DPBF) and 2',7'-Dichlorodihydrofluorescein diacetate (DCFH-DA) were used to detect the production of reactive oxygen species (ROS). The thermal stability of PDA-Cur nanocomposites was investigated by temperature rising test. The antibacterial effect of PDA-Cur was determined by plate counting technique using Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) as models. In addition, the stability and antibacterial mechanism of PDA-Cur were investigated. Finally, the biocompatibility was evaluated by cytotoxicity and hemolysis tests. Results The compound system of polydopamine and curcumin was successfully prepared, which showed improved stability compared with Cur. The consumption of DPBF by the singlet oxygen produced by PDA-Cur was as high as 80%. In the heating test, the highest temperature increased to 59 °C, which contributed to the photodynamic and photothermal inactivation of bacteria. PDA-Cur nanocomposites showed good antibacterial activity against S. aureus and E. coli. Under 405 nm light, the bactericidal rate of PDA-Cur against S. aureus can reach 100% at a low concentration of 10^-4 nM, and that against E. coli was 100% at 1 nM. Under 405 + 808 nm light, the bactericidal rate of PDA-Cur against E. coli enhanced to 100% at 0.1 nM. In addition, PDA-Cur had low cytotoxicity and negligible hemolytic activity, showing good biocompatibility. Conclusion PDA-Cur nanocomposites had good photodynamic effect, photo thermal conversion ability and biocompatibility. Compared with free Cur, the antibacterial activity of PDA-Cur was significantly improved, and the antibacterial effect with combined light was stronger than that of free Cur. Therefore, the construction of PDA-Cur nanocomposites have confirmed that the combination of PDT and PTT can greatly improve the antibacterial effect and reach bactericidal effect at low concentration, which provides a strategy for the design of next generation antimicrobial agents.

Curcumin: Modern Applications for a Versatile Additive

The recent development of several methods for extracting curcumin from the root of the plant Curcuma longa has led to intensified research on the properties of curcumin and its fields of application. Following the studies and the accreditation of curcumin as a natural compound with antifungal, antiviral, and antibacterial properties, new fields of application have been developed in two main directions—food and medical, respectively. This review paper aims to synthesize the fields of application of curcumin as an additive for the prevention of spoilage, safety, and quality of food. Simultaneously, it aims to present curcumin as an additive in products for the prevention of bacterial infections and health care. In both cases, the types of curcumin formulations in the form of (nano)emulsions, (nano)particles, or (nano)composites are presented, depending on the field and conditions of exploitation or their properties to be used. The diversity of composite materials that can be designed, depending on the purpose of use, leaves open the field of research on the conditioning of curcumin. Various biomaterials active from the antibacterial and antibiofilm point of view can be intuited in which curcumin acts as an additive that potentiates the activities of other compounds or has a synergistic activity with them.