Osteoblast differentiation of mesenchymal stem cells on modified PES-PEG electrospun fibrous composites loaded with Zn2SiO4 bioceramic nanoparticles

Mesenchymal stem cells osteogenic differentiation by ZnO nanoparticles and polyurethane bimodal foam nanocomposites

Mesenchymal stem cells with tissue repair capacity involve in regenerative medicine. MSCs can promote bone repair when employed with nano scaffolds/particles. Here, the MTT and Acridine Orange assay enabled the cytotoxic concentration of Zinc oxide nanoparticles and Polyurethane evaluation. Following culturing adipose tissue-derived MSCs, ADSCs' proliferation, growth, and osteogenic differentiation in the presence of PU with and without ZnO NPs is tracked by a series of biological assays, including Alkaline Phosphatase activity, Calcium deposition, alizarin red staining, RT-PCR, scanning electron microscope, and immunohistochemistry. The results showed boosted osteogenic differentiation of ADSCs in the presence of 1% PU scaffold and ZnO NPS and can thus apply as a new bone tissue engineering matrix. The expression level of Osteonectin, Osteocalcin, and Col1 increased in PU-ZnO 1% on the 7th and 14th days. There was an increase in the Runx2 gene expression on the 7th day of differentiation in PU-ZnO 1%, while it decreased on day 14th. In conclusion, Polyurethane nano scaffolds supported the MSCs' growth and rapid osteogenic differentiation. The PU-ZnO helps not only with cellular adhesion and proliferation but also with osteogenic differentiation.

Enhancing the effectiveness of Alkaline Phosphatase and bone matrix proteins by tunable metal-organic composite for accelerated mineralization

The irregular expression of bone matrix proteins occurring during the mineralization of bone regeneration results in various deformities which poses a major concern of orthopedic reconstruction. The limitations of the existing reconstruction practice paved a way for the development of a metal-organic composite [TQ-Sr-Fe] with Metal ions strontium [Sr] and iron [Fe] and a biomolecule Thymoquinone [TQ] in an attempt to enhance the bone mineralization due to their positive significance in osteoblast differentiation, proliferation and maturation. TQ-Sr-Fe was synthesized by in-situ coprecipitation and subjected to various characterization to determine their nature, compatibility and osteogenic efficiency. The crystallographic and electron microscopy analysis reveals sheet like structure of the composite. The negative cytotoxicity of TQ-Sr-Fe in the MG 63 cell line signified their biocompatibility. Cell adhesion and proliferation rate affirmed osteoconductive and osteoinductive nature of the composites and it was further supported by the gene expression of osteoblastic differentiation. The sequential expression of bone matrix proteins such as OCN, SPARC, COL 1, and Alkaline Phosphatase elevate the calcium deposition of MG-63 osteoblast like cells and initiates mineralization compared to control. Thus, the metal-organic composite TQ-Sr-Fe would make a suitable composite for accelerating mineralization process which would leads to faster bone regeneration.

Biodegradable and Non-Biodegradable Biomaterials and Their Effect on Cell Differentiation

Biomaterials for tissue scaffolds are key components in modern tissue engineering and regenerative medicine. Targeted reconstructive therapies require a proper choice of biomaterial and an adequate choice of cells to be seeded on it. The introduction of stem cells, and the transdifferentiation procedures, into regenerative medicine opened a new era and created new challenges for modern biomaterials. They must not only fulfill the mechanical functions of a scaffold for implanted cells and represent the expected mechanical strength of the artificial tissue, but furthermore, they should also assure their survival and, if possible, affect their desired way of differentiation. This paper aims to review how modern biomaterials, including synthetic (i.e., polylactic acid, polyurethane, polyvinyl alcohol, polyethylene terephthalate, ceramics) and natural (i.e., silk fibroin, decellularized scaffolds), both non-biodegradable and biodegradable, could influence (tissue) stem cells fate, regulate and direct their differentiation into desired target somatic cells.

Synthetic electrospun nanofibers as a supportive matrix in osteogenic differentiation of induced pluripotent stem cells

Continuous remodeling is not able to repair large bone defects. Bone tissue engineering is aimed to repair these defects by creating bone grafts. To do this, several technologies and biomaterials have been employed to fabricate an in vivo-like supportive matrix. Electrospinning is a versatile technique to fabricate porous matrices with interconnected pores and high surface area, replicating in vivo microenvironment. Electrospun scaffolds have been used in a large number of studies to provide a matrix for bone regeneration and osteogenic differentiation of stem cells such as induced pluripotent stem cells (iPSCs). Electrospinning uses both natural and synthetic polymers, either alone or in combination, to fabricate scaffolds. Among them, synthetic polymers have had a great promise in bone regeneration and repair. They allow the fabrication of biocompatible and biodegradable scaffolds with high mechanical properties, suitable for bone engineering. Furthermore, several attempts have done to increase the osteogenic properties of these scaffolds. This paper reviewed the potential of synthetic electrospun scaffolds in osteogenic differentiation of iPSCs. In addition, the approaches to improve the osteogenic differentiation of these scaffolds are addressed.

Osteogenic differentiation of adipose-derived stem cells on dihydroartemisinin electrospun nanofibers

Background

Adipose tissue-derived stem cells (ASCs) are promising candidate in stem cell therapies, and maintaining their stemness potential is vital to achieve effective treatment. Natural-based scaffolds have been recently attracted increasing attention in nanomedicine and drug delivery. In this study, Dihydroartemisinin (DHART)-loaded polycaprolactone collagen nanofibers (PCL/Col NFs) were constructed as effective biocompatible scaffolds through adjusting the proportions of hydrophobic/ hydrophilic polymers for enhanced osteoblastic differentiation of human adipose-derived stem cells (hADSCs).

Results

The designed NFs were characterized through FTIR, XRD, TGA, FE-SEM, and tensile testing. DHART-loaded PCL/Col electrospun NFs provide an ideal solution, with the potential of sustained drug release as well as inhibition of drug re-crystallization. Interestingly, inhibiting DHART re-crystallization can improve its bioavailability and provide a more effective therapeutic efficacy. Besides, the data set found through FE-SEM, MTT, PicoGreen, qPCR, and alkaline phosphatase (ALP) assays revealed the improved adhesion and proliferation rate of hADSCs cultured on PCL/Col/DHART (5%) NFs after 14 and 21 days of incubation.

Conclusions

These findings confirmed the potential of the designed NF scaffolds for sustained/controlled release of DHART therapeutic molecules toward bone tissue regeneration and engineering.

Graphical Abstract

The Role of Zinc in Bone Mesenchymal Stem Cell Differentiation

Zinc is an essential trace element for bone growth and bone homeostasis in the human body. Bone mesenchymal stem cells (BMSCs) are multipotent progenitors existing in the bone marrow stroma with the capability of differentiating along multiple lineage pathways. Zinc plays a paramount role in BMSCs, which can be spurred differentiating into osteoblasts, chondrocytes, or adipocytes, and modulates the formation and activity of osteoclasts. The expression of related genes also changed during the differentiation of various cell phenotypes. Based on the important role of zinc in BMSC differentiation, using zinc as a therapeutic approach for bone remodeling will be a promising method. This review explores the role of zinc ion in the differentiation of BMSCs into various cell phenotypes and outlines the existing research on their molecular mechanism.

The Use of Fibers in Bone Tissue Engineering

Bone tissue engineering aims to restore and maintain the function of bone by means of biomaterial-based scaffolds. This review specifically focuses on the use of fibers in biomaterials used for bone tissue engineering as suitable environment for bone tissue repair and regeneration. We present a bioinspired rationale behind the use of fibers in bone tissue engineering and provide an overview of the most common fiber fabrication methods, including solution, melt, and microfluidic spinning. Subsequently, we provide a brief overview of the composition of fibers that are used in bone tissue engineering, including fibers composed of (i) natural polymers (e.g., cellulose, collagen, gelatin, alginate, chitosan, and silk, (ii) synthetic polymers (e.g., polylactic acid [PLA], polycaprolactone, polyglycolic acid [PGA], polyethylene glycol, and polymer blends of PLA and PGA), (iii) ceramic fibers (e.g., aluminium oxide, titanium oxide, and zinc oxide), (iv) metallic fibers (e.g., titanium and its alloys, copper and magnesium), and (v) composite fibers. In addition, we review the most relevant fiber modification strategies that are used to enhance the (bio)functionality of these fibers. Finally, we provide an overview of the applicability of fibers in biomaterials for bone tissue engineering, with a specific focus on mechanical, pharmaceutical, and biological properties of fiber-functionalized biomaterials for bone tissue engineering. Impact statement Natural bone is a complex composite material composed of an extracellular matrix of mineralized fibers containing living cells and bioactive molecules. Consequently, the use of fibers in biomaterial-based scaffolds offers a wide variety of opportunities to replicate the functional performance of bone. This review provides an overview of the use of fibers in biomaterials for bone tissue engineering, thereby contributing to the design of novel fiber-functionalized bone-substituting biomaterials of improved functionality regarding their mechanical, pharmaceutical, and biological properties.

3D Printed SiOC(N) Ceramic Scaffolds for Bone Tissue Regeneration: Improved Osteogenic Differentiation of Human Bone Marrow-Derived Mesenchymal Stem Cells

Bone tissue engineering has developed significantly in recent years as there has been increasing demand for bone substitutes due to trauma, cancer, arthritis, and infections. The scaffolds for bone regeneration need to be mechanically stable and have a 3D architecture with interconnected pores. With the advances in additive manufacturing technology, these requirements can be fulfilled by 3D printing scaffolds with controlled geometry and porosity using a low-cost multistep process. The scaffolds, however, must also be bioactive to promote the environment for the cells to regenerate into bone tissue. To determine if a low-cost 3D printing method for bespoke SiOC(N) porous structures can regenerate bone, these structures were tested for osteointegration potential by using human mesenchymal stem cells (hMSCs). This includes checking the general biocompatibilities under the osteogenic differentiation environment (cell proliferation and metabolism). Moreover, cell morphology was observed by confocal microscopy, and gene expressions on typical osteogenic markers at different stages for bone formation were determined by real-time PCR. The results of the study showed the pore size of the scaffolds had a significant impact on differentiation. A certain range of pore size could stimulate osteogenic differentiation, thus promoting bone regrowth and regeneration.

Composite Materials Based on Iron Oxide Nanoparticles and Polyurethane for Improving the Quality of MRI

Polyether urethane (PU)-based magnetic composite materials, containing different types and concentrations of iron oxide nanostructures (Fe₂O₃ and Fe₃O₄), were prepared and investigated as a novel composite platform that could be explored in different applications, especially for the improvement of the image quality of MRI investigations. Firstly, the PU structure was synthetized by means of a polyaddition reaction and then hematite (Fe₂O₃) and magnetite (Fe₃O₄) nanoparticles were added to the PU matrices to prepare magnetic nanocomposites. The type and amount of iron oxide nanoparticles influenced its structural, morphological, mechanical, dielectric, and magnetic properties. Thus, the morphology and wettability of the PU nanocomposites surfaces presented different behaviours depending on the amount of the iron oxide nanoparticles embedded in the matrices. Mechanical, dielectric, and magnetic properties were enhanced in the composites’ samples when compared with pristine PU matrix. In addition, the investigation of in vitro cytocompatibility of prepared PU nanocomposites showed that these samples are good candidates for biomedical applications, with cell viability levels in the range of 80–90%. Considering all the investigations, we can conclude that the addition of magnetic particles introduced additional properties to the composite, which could significantly expand the functionality of the materials developed in this work.

Enhanced neural differentiation of human-induced pluripotent stem cells on aligned laminin-functionalized polyethersulfone nanofibers; a comparison between aligned and random fibers on neurogenesis

Despite the numerous attempts in nerve tissue engineering, no ideal strategy has been translated into effective therapy for neuronal regeneration yet. Here, we designed a novel nerve regeneration scaffold combining aligned laminin-immobilized polyethersulfone (PES) nanofibers and human-induced pluripotent stem cells (hiPSCs) for transplantation strategies. Aligned and random PES nanofibers were fabricated by electrospinning method with a diameter of 95-500 nm and were then modified with covalent laminin bounding subsequent to O₂ plasma treatment. PES-functionalized fibers found to induce a remarkable higher rate of neuronal genes expression as compared to nontreated group. In addition, hiPSCs cultured on aligned pure fibers exhibited the extension of neurites along with fibers direction and an exponentially elevated expression of neuron specific enolase (early neuroectoderm marker), Tuj-1 (axonal marker), and microtubule-associated protein 2 (dendritic marker) in comparison with random pure fibers. The concomitant of increased hydrophilicity and biocompatibility along with exploiting topographical cues and directional guidance make aligned PES-plasma-laminin a versatile scaffold for adhesion, proliferation, spreading, and differentiation of hiPSCs into nerve cells.

Regeneration of Bone Defects in a Rabbit Femoral Osteonecrosis Model Using 3D-Printed Poly (Epsilon-Caprolactone)/Nanoparticulate Willemite Composite Scaffolds

Steroid-associated osteonecrosis (SAON) is a chronic disease that leads to the destruction and collapse of bone near the joint that is subjected to weight bearing, ultimately resulting in a loss of hip and knee function. Zn2+ ions, as an essential trace element, have functional roles in improving the immunophysiological cellular environment, accelerating bone regeneration, and inhibiting biofilm formation. In this study, we reconstruct SAON lesions with a three-dimensional (3D)-a printed composite made of poly (epsilon-caprolactone) (PCL) and nanoparticulate Willemite (npW). Rabbit bone marrow stem cells were used to evaluate the cytocompatibility and osteogenic differentiation capability of the PCL/npW composite scaffolds. The 2-month bone regeneration was assessed by a Micro-computed tomography (micro-CT) scan and the expression of bone regeneration proteins by Western blot. Compared with the neat PCL group, PCL/npW scaffolds exhibited significantly increased cytocompatibility and osteogenic activity. This finding reveals a new concept for the design of a 3D-printed PCL/npW composite-based bone substitute for the early treatment of osteonecrosis defects.

Donepezil hydrochloride as a novel inducer for osteogenic differentiation of mesenchymal stem cells on PLLA scaffolds in vitro

Over the past decades, bone defects caused by illness or trauma have been the most common traumatic injuries in humans and treatment of orthopedic infections has always been a serious challenge to experts in the world. In this project, poly L-lactic acid (PLLA) nanofibrous scaffolds were synthesized as a nontoxic, eco-friendly, and cost-effective scaffold by the electrospinning technique. Then, the impact of PLLA on the cell proliferation and osteogenic differentiation of human mesenchymal stem cells (hMSCs) was assayed in the presence and absence of donepezil hydrochloride (DH) which was prescribed in patients with Alzheimer's disease. Also, hMSCs were seeded on PLLA scaffold in the presence (PLLA-DH) and absence of 1 μg mL^-1 of DH under osteogenic induction media. Osteogenic differentiation of hMSCs was assessed by specific bone-related tests including alkaline phosphatase (ALP) activity, Alizarin red and von Kossa staining, calcium content assay. Also, Osteocalcin and osteopontin were evaluated as osteogenic proteins as well as ALP, osteonectin, osteocalcin, collagen type I (Col-I) and Runx2 as osteogenic genes via immunocytochemistry (ICC) and Real-time PCR analyses. The obtained data showed the higher ALP enzyme activity and biomineralization, more intensity during von Kossa staining as well as the increase in the expression rate of osteogenic related gene and protein markers in differentiated hMSCs on PLLA-DH. In conclusion, the present study revealed that the combination of PLLA scaffold with DH provides a scope to develop a suitable matrix in bone tissue engineering applications.

Doxycycline-doped membranes induced osteogenic gene expression on osteoblastic cells

OBJECTIVES

To analyze how novel developed silicon dioxide composite membranes, functionalized with zinc or doxycycline, can modulate the expression of genes related to the osteogenic functional capacity of osteoblastic cells.

METHODS

The composite nanofibers membranes were manufactured by using a novel polymeric blend and 20 nm silicon dioxide nanoparticles (SiO₂-NPs). To manufacture the membranes, 20 nm SiO₂-NPs were added to the polymer solution and the resulting suspension was processed by electrospinning. In a second step, the membranes were functionalized with zinc or doxycycline. Then, they were subjected to MG63 osteoblast-like cells culturing for 48 h. After this time, real-time quantitative polymerase chain reaction (RT-qPCR) was carried out to study the expression of Runx-2, OSX, ALP, OSC, OPG, RANKL, Col-I, BMP-2, BMP-7, TGF-β1, VEGF, TGF-βR1, TGF- βR2, and TGF-βR3. Mean comparisons were conducted by One-way ANOVA and Tukey tests (p < 0.05).

RESULTS

In general, the blending of SiO₂-NPs in the tested non-resorbable polymeric scaffold improves the expression of osteogenic genes over the control membranes. Doxycycline doping of experimental scaffolds attained the best results, encountering up-regulation of BMP-2, ALP, OPG, TGFβ-1 and TGFβ-R1. Membranes with zinc induced a significant increase in the expression of Col-I, ALP and TGF β1. Both, zinc and doxycycline functionalized membranes enormously down-regulated the expression of RANKL.

CONCLUSIONS

Zinc and doxycycline doped membranes are bioactive inducing overexpression of several osteogenic gene markers.

CLINICAL SIGNIFICANCE

Doxycycline doped membranes may be a potential candidate for use in GBR procedures in several challenging pathologies, including periodontal diseases.

Tailoring Nano-Porous Surface of Aligned Electrospun Poly (L-Lactic Acid) Fibers for Nerve Tissue Engineering

Despite the existence of many attempts at nerve tissue engineering, there is no ideal strategy to date for effectively treating defective peripheral nerve tissue. In the present study, well-aligned poly (L-lactic acid) (PLLA) nanofibers with varied nano-porous surface structures were designed within different ambient humidity levels using the stable jet electrospinning (SJES) technique. Nanofibers have the capacity to inhibit bacterial adhesion, especially with respect to Staphylococcus aureus (S. aureus). It was noteworthy to find that the large nano-porous fibers were less detrimentally affected by S. aureus than smaller fibers. Large nano-pores furthermore proved more conducive to the proliferation and differentiation of neural stem cells (NSCs), while small nano-pores were more beneficial to NSC migration. Thus, this study concluded that well-aligned fibers with varied nano-porous surface structures could reduce bacterial colonization and enhance cellular responses, which could be used as promising material in tissue engineering, especially for neuro-regeneration.

Scaffold Pore Geometry Guides Gene Regulation and Bone-like Tissue Formation in Dynamic Cultures

Cells sense and respond to scaffold pore geometry and mechanical stimuli. Many fabrication methods used in bone tissue engineering render structures with poorly controlled pore geometries. Given that cell-scaffold interactions are complex, drawing a conclusion on how cells sense and respond to uncontrolled scaffold features under mechanical loading is difficult. In this study, monodisperse templated scaffolds (MTSC) were fabricated and used as well-defined porous scaffolds to study the effect of dynamic culture conditions on bone-like tissue formation. Human bone marrow-derived stromal cells were cultured on MTSC or conventional salt-leached scaffolds (SLSC) for up to 7 weeks, either under static or dynamic conditions (wall shear stress [WSS] using spinner flask bioreactors). The influence of controlled spherical pore geometry of MTSC subjected to static or dynamic conditions on osteoblast cell differentiation, bone-like tissue formation, structure, and distribution was investigated. WSS generated within the two idealized geometrical scaffold features was assessed. Distinct response to fluid flow in osteoblast cell differentiation were shown to be dependent on scaffold pore geometry. As revealed by collagen staining and microcomputed tomography images, dynamic conditions promoted a more regular extracellular matrix (ECM) formation and mineral distribution in both scaffold types compared with static conditions. The results showed that regulation of bone-related genes and the amount and the structure of mineralized ECM were dependent on scaffold pore geometry and the mechanical cues provided by the two different culture conditions. Under dynamic conditions, SLSC favored osteoblast cell differentiation and ECM formation, whereas MTSC enhanced ECM mineralization. The spherical pore shape in MTSC supported a more trabecular bone-like structure under dynamic conditions compared with MTSC statically cultured or to SLSC under either static or dynamic conditions. These results suggest that cell activity and bone-like tissue formation is driven not only by the pore geometry but also by the mechanical environment. This should be taken into account in the future design of complex scaffolds, which should favor cell differentiation while guiding the formation, structure, and distribution of the engineered bone tissue. This could help to mimic the anatomical complexity of the bone tissue structure and to adapt to each bone defect needs. Impact statement Aging of the human population leads to an increasing need for medical implants with high success rate. We provide evidence that cell activity and the amount and structure of bone-like tissue formation is dependent on the scaffold pore geometry and on the mechanical environment. Fabrication of complex scaffolds comprising concave and planar pore geometries might represent a promising direction toward the tunability and mimicry the structural complexity of the bone tissue. Moreover, the use of fabrication methods that allow a systematic fabrication of reproducible and geometrically controlled structures would simplify scaffold design optimization.

The impact of Zn-doped synthetic polymer materials on bone regeneration: a systematic review

Introduction

To repair bone defects, a variety of bone substitution materials have been used, such as ceramics, metals, natural and synthetic polymers, and combinations thereof. In recent decades, a wide range of synthetic polymers have been used for bone regeneration. These polymers have the advantages of biocompatibility, biodegradability, good mechanical properties, low toxicity, and ease of processing. However, when used alone, they are unable to achieve ideal bone formation. Incorporating zinc (Zn) into synthetic polymers has been considered, as previous studies have shown that Zn²⁺ promotes stem cell osteogenesis and mineral deposition. The purpose of this systematic review was to provide an overview of the application and effectiveness of Zn in synthetic polymers for bone regeneration, whether used alone or in combination with other biomaterials. This study was performed according to the PRISMA guidelines.

Materials and methods

A search of the PubMed, Embase, and the Cochrane Library databases for articles published up to June 2020 revealed 153 relevant studies. After screening the titles, abstracts, and full texts, 13 articles were included in the review; 9 of these were in vitro, 3 were in vivo, and 1 included both in vitro and in vivo experiments.

Results

At low concentrations, Zn²⁺ promoted cell proliferation and osteogenic differentiation, while high-dose Zn²⁺ resulted in cytotoxicity and inhibition of osteogenic differentiation. Additionally, one study showed that Zn²⁺ reduced apatite formation in simulated body fluid. In all of the in vivo experiments, Zn-containing materials enhanced bone formation.

Conclusions

At appropriate concentrations, Zn-doped synthetic polymer materials are better able to promote bone regeneration than materials without Zn.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13287-021-02195-y.

Nanocomposite scaffolds composed of Apacite (apatite-calcite) nanostructures, poly (ε-caprolactone) and poly (2-hydroxyethylmethacrylate): The effect of nanostructures on physico-mechanical properties and osteogenic differentiation of human bone marrow mesenchymal stem cells in vitro

Nanocomposite scaffolds were fabricated from poly (ε-caprolactone) (PCL), Poly (2-hydroxyethylmethacrylate) (PHEMA), and Apacite (Apatite-calcite) nanostructures (15 and 25 wt%). The nanoscale structure, physical and chemical properties, mechanical properties, hydrophilic behavior, degradability and osteogenic properties of the fabricated scaffolds were evaluated. The results showed that the mechanical strength, degradation, wetting ability, and mechanical strength of PCL-PHEMA scaffolds significantly increases upon inclusion of Apacite nanoparticles up to 25 wt%. Accordingly, the best mechanical values (E ~ 7.109 MPa and σ ~ 0.414 MPa) and highest degradability (32% within 96 h) were recorded for PCL-PHEMA scaffolds containing 25 wt% of Apacite. Furthermore, highest porosity and roughness were observed in the PCL-PHEMA/25% Apacite as a result of the Apacite nanoparticles inclusion. There was no cytotoxicity recorded for the fabricated scaffolds based on the results obtained from MTT assay and acridine orange staining. Alkaline phosphatase activity, calcium content quantification, Van Kossa staining, FESEM and real time PCR tests confirmed the biomineralization, and the differentiation potential of the nanocomposite scaffolds. Overall, the 3D structure, optimum porosity and balanced dissolution rate of PCL-PHEMA/25% Apacite providing a balanced microenvironment resulted in improved cell adhesion, cell behavior, and replication, as well as osteogenic induction of human bone-marrow-derived mesenchymal stem cells (hBM-MSCs).

A comparative study of hBM-MSCs' differentiation toward osteogenic lineage in the presence of progesterone and estrogen hormones separately and concurrently in vitro

Promising cell sources for tissue engineering comprise bone marrow derived-mesenchymal stem cells (BM-MSCs) that have multiple differentiation potentials. Also, sex hormones act as important elements in bone development and maintenance, and the roles of two female sex steroid hormones known as estrogen (17-β estradiol) and progesterone in osteogenic differentiation of human BM-MSCs (hBM-MSCs) are studied. For this purpose, hBM-MSCs were treated with a 1 × 10^-6  M concentration of 17-β estradiol and progesterone separately and simultaneously while the optimum concentrations were obtained by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Osteogenic differentiation tests including measurement of alkaline phosphatase (ALP) enzyme activity, the content of total mineral calcium, mineralized matrix staining by Alizarin Red and Von Kossa solutions, real-time reverse transcription polymerase chain reaction (RT-PCR), and immunofluorescence staining were carried out on Days 7 and 14 of differentiation. To exhibit the morphology of the cells, the BM-MSCs were stained with acridine orange (AO) solution. In this study, the results of ALP activity assay, calcium content and real-time RT-PCR assay and also all tests of differentiation staining have shown that 17-β estradiol has been recognized as an enhancing factor of osteogenic differentiation. Furthermore, MTT assay and AO staining revealed progesterone as a factor that seriously improved the proliferation of hBM-MSCs. Generally, the 17-β estradiol individually or in the presence of progesterone has more effects on BM-MSCs' osteogenic differentiation compared to progesterone alone. In this study, it is indicated that the effect of the 17-β estradiol and progesterone concurrently was the same as individual 17-β estradiol on the differentiation of hBM-MSCs.

The effect of female sex steroid hormones on osteogenic differentiation of endometrial stem cells

Bone regeneration is a significant and crucial health issue worldwide. Tissue bioengineering has shown itself to be the best substitute for common clinical treatment of bone loss. The suitable cell source is human endometrial stem cells (hEnSCs) which have several suitable characteristics for this approach. Since sex steroid hormones are involved in expansion and conservation of the skeleton, the effect of two sex steroid hormones known as estrogen (17-β estradiol) and progesterone on osteogenic differentiation of hEnSCs were examined. For this purpose, hEnSCs were treated with 17-β estradiol and progesterone separately (1 × 10^-6 M) and simultaneously (1 × 10^-7 M). Osteogenic differentiation tests including measurement of total mineral calcium content, Alizarin Red staining, the quantitative expression levels of some osteogenic markers by Real-time RT-PCR, and immunofluorescence staining were performed at 7 and 14 days of differentiation. To exhibit the morphology of the cells in osteogenic and culture medium, the hEnSCs were stained with Acridine Orange (AO) solution. In this research, MTT assay and AO staining revealed progesterone and 17-β estradiol increase the proliferation of hEnSCs in a dose-dependent manner. Furthermore, the results of calcium content analysis, Real-time RT-PCR assay, and all tests of differentiation staining have shown that 17-β estradiol and progesterone cannot induce hEnSCs' osteogenic differentiation. In conclusion, it is indicated that 17-β estradiol and progesterone do not have positive effects on hEnSCs' osteogenic differentiation in vitro.

Preparation and characterization of semi-IPNs of polycaprolactone/poly (acrylic acid)/cellulosic nanowhisker as artificial articular cartilage

Cartilage is a semi-solid resilient and smooth elastic connective tissue and upon damage, its repair is almost impossible or occurs with a very slow recovery process. Polycaprolactone (PCL), used as a biocompatible polymer, withholds all required mechanical properties, except suitable cell adhesion due to its hydrophobicity. In order to resolve this issue, we sought to introduce appropriate semi-IPNs into the system to regain its hydrophilicity base on increasing of the hydrophilic polymer. PCL and Cellulose nanowhiskers (CNWs) were entrapped in a network of poly (acrylic acid) that had been crosslinked via a novel acrylic-urethane crosslinker. The influential synthetic parameters on the preparation of artificial articular cartilages were investigated based on the Taguchi test design. The prepared CNW, acrylic-urethane crosslinker and semi-IPNs were studied via ¹H NMR, FTIR, SEM, TEM, TGA, water swelling, water contact angle, tensile, and MTT analyses. According to the results, the optimal amount of monomer was about 46%. Incorporation of an optimized amount of CNW, which was 0.5%, improved the mechanical properties of artificial cartilage. After a 30 h time period, semi-IPNs showed the water absorption of about 30%. MTT on days 1, 3 and 5, as well as cell attachment, confirmed the biocompatibility of the semi-IPNs.

Osteogenic differentiation of hMSCs on semi-interpenetrating polymer networks of polyurethane/poly(2‑hydroxyethyl methacrylate)/cellulose nanowhisker scaffolds

Poly (2‑hydroxyethyl methacrylate) (PHEMA) was crosslinked in the presence of biocompatible and biodegradable poly(caprolactone) (PCL) based polyurethanes (PUs) and cellulose nanowhiskers (CNWs). The CNWs were obtained from wastepaper. In order to crosslink PHEMA (10 wt%), a novel acrylic-urethane cross-linker was produced by a condensation reaction of PHEMA and hexamethylene diisocyanate (HDI). The PU-PHEMA-CNWs scaffolds were prepared by solvent casting/particulate leaching method in different weight percentages of CNWs (i.e., 0, 0.1, 0.5, and 1 wt%). The structural, mechanical, and in vitro biological properties of bio-nanocomposites were evaluated via FTIR, SEM, tensile, and MTT assay. The tensile strength of PU-PHEMA-0, PU-PHEMA-0.1, PU-PHEMA-0.5, and PU-PHEMA-1 were 76.2, 95.8, 98.1, and 89.8 kPa, respectively. Incorporation of CNWs also resulted in improved cell proliferation on PU-PHEMA-CNWs scaffolds. The bone marrow derived human mesenchymal stem cells (hMSCs) were seeded on the prepared porous scaffolds and incubated in osteogenic medium. Based on the results including calcium content assay, alkaline phosphatase assay, and mineralization staining, PU-PHEMA-CNW scaffolds were introduced as a suitable election for imitating the behavior of cellular niche. Bone mineralization and osteogenesis differentiation of hMSCs on PU-PHEMA-CNW scaffolds were significantly more than control after 14 days.

Baghdadite nanoparticle-coated poly l-lactic acid (PLLA) ceramics scaffold improved osteogenic differentiation of adipose tissue-derived mesenchymal stem cells

Bone repair has been a new approach in regenerative medicine especially by application of stem cells. Discovering a suitable combination of scaffolds to stimulate osteogenesis is one of the major concerns in this issue. Porous polymeric scaffolds such as poly l-lactic acid (PLLA) have been attracted a lot of attention because of their biodegradability. In the present study, we have been coated Baghdadite on the plasma-treated surface of PLLA and evaluated osteogenic potential of mesenchymal stem cells (MSCs). Adipose tissue-derived mesenchymal stem cells (AD-MSCs) were cultured on PLLA and PLLA-Baghdadite scaffolds, and cell properties were characterized by MTT assay, scanning electron microscope, and FTIR analysis. Then, osteogenic differentiation potential of AD-MSCs has been investigated, such as alkaline phosphatase (ALP) activity, calcium mineral deposition, and the expression of bone-related genes (RUNX2, ALP, and OCN). The results have been indicated that calcium content and ALP activity of cells cultured on PLLA-Baghdadite nanofibers were higher than that of tissue culture polystyrenes (TCPs). Gene expression analysis showed that PLLA-Baghdadite had effectively induced osteogenesis-related genes. Taken together, these results suggest that porous nanofiber scaffolds which coated with Baghdadite can enhance osteogenic differentiation of AD-MSC, and PLLA-Baghdadite can be used as a new biodegradable scaffold for bone regeneration. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1284-1293, 2019.

Enhancement of osteogenic differentiation of adipose-derived stem cells by PRP modified nanofibrous scaffold

Recent developments in bone tissue engineering have paved the way for more efficient and cost-effective strategies. Additionally, utilization of autologous sources has been considered very desirable and is increasingly growing. Recently, activated platelet rich plasma (PRP) has been widely used in the field of bone tissue engineering, since it harbours a huge number of growth factors that can enhance osteogenesis and bone regeneration. In the present study, the osteogenic effects of PRP coated nanofibrous PES/PVA scaffolds on adipose-derived mesenchymal stem cells have been investigated. Common osteogenic markers were assayed by real time PCR. Alkaline phosphate activity, calcium deposition and Alizarin red staining assays were performed as well. The results revealed that the highest osteogenic differentiation occurred when cells were cultured on PRP coated PES/PVA scaffolds. Interestingly, direct application of PRP to culture media had no additive effects on osteogenesis of cells cultured on PRP coated PES/PVA scaffolds or those receiving typical osteogenic factors. The highest osteogenic effects were achieved by the simplest and most cost-effective method, i.e. merely by using PRP coated scaffolds. PRP coated PES/PVA scaffolds can maximally induce osteogenesis with no need for extrinsic factors. The major contribution of this paper to the current researches on bone regeneration is to suggest an easy, cost-effective approach to enhance osteogenesis via PRP coated scaffolds, with no additional external growth factors.

The Impact of Metallic Nanoparticles on Stem Cell Proliferation and Differentiation

Nanotechnology has a wide range of medical and industrial applications. The impact of metallic nanoparticles (NPs) on the proliferation and differentiation of normal, cancer, and stem cells is well-studied. The preparation of NPs, along with their physicochemical properties, is related to their biological function. Interestingly, various mechanisms are implicated in metallic NP-induced cellular proliferation and differentiation, such as modulation of signaling pathways, generation of reactive oxygen species, and regulation of various transcription factors. In this review, we will shed light on the biomedical application of metallic NPs and the interaction between NPs and the cellular components. The in vitro and in vivo influence of metallic NPs on stem cell differentiation and proliferation, as well as the mechanisms behind potential toxicity, will be explored. A better understanding of the limitations related to the application of metallic NPs on stem cell proliferation and differentiation will afford clues for optimal design and preparation of metallic NPs for the modulation of stem cell functions and for clinical application in regenerative medicine.

Bioactive glass ceramic nanoparticles-coated poly(l-lactic acid) scaffold improved osteogenic differentiation of adipose stem cells in equine

Horses with big bone fractures have low chance to live mainly due to the lake of a proper treatment strategy. We believe that further attempts in equine bone tissue engineering will probably be required to meet all the needs for the lesion therapies. Therefore in this study we aimed to investigate the osteogenic differentiation capacity of equine adipose-derived stem cells (e-ASCs) on nano-bioactive glass (nBGs) coated poly(l-lactic acid) (PLLA) nanofibers scaffold (nBG-PLLA). Using electrospinning technique, PLLA scaffold was prepared successfully and coated with nBGs. Fabricated nanofibers were characterized by MTT, SEM, and FTIR analyses, and then osteogenic differentiation potential of isolated e-ASCs was investigated by the most key osteogenic markers, namely Alizarin red-S, ALP, calcium content and bone related (RUNX2, Collagen I, Osteonectin, and ALP) gene markers. Our results indicated that nBGs was successfully coated on PLLA scaffold and this scaffold had no negative (p>0.05) effect on cell growth rate as indicated by MTT assay. Moreover, e-ASCs that differentiated on nBGs-PLLA scaffold showed a higher (p<0.05) ALP activity, more (p<0.05) calcium content, and higher (p<0.05) expression of bone-related genes than that on uncoated PLLA scaffold and TCPS. According to the results, a combination of bioceramics and biopolymeric nanofibers hold valuable promising potentials to use for bone tissue engineering application and regenerative medicine.

In vitro proliferation and differentiation of human bone marrow mesenchymal stem cells into osteoblasts on nanocomposite scaffolds based on bioactive glass (64SiO2-31CaO-5P2O5)-poly-l-lactic acid nanofibers fabricated by electrospinning method

Electrospinning method was employed for fabrication of SiO₂-CaO-P₂O₅ bioactive glass (BG) nanofibers, poly-l-lactic acid (PLLA) nanofibers and nanocomposite scaffolds fabricated from as-prepared nanofibers. Characterization of the prepared nanofibers and scaffolds by XRD, FTIR, and SEM techniques revealed the formation of nanofibers with mean diameter of about 500nm and fully fibrous scaffolds with porous structure and interconnected pores. The growth, viability and proliferation of cultured human bone marrow mesenchymal stem cells in the fabricated nanofibers and bioactive glass-poly-l-lactic acid (BG-PLLA) nanocomposite scaffolds were studied using various biological assays including MTT, ALP activity, calcium deposit content, Alizarin red staining, and RT-PCR test. Based on the obtained results, incorporation of BG nanofibers in the nanocomposite scaffolds causes the better biological behavior of the scaffolds. In addition, three-dimensional and fibrous-porous structure of the scaffolds further contributes to their improved cell behavior compared to the components.