Progress in miniaturization of protein arrays--a step closer to high-density nanoarrays

Protein nanoarrays using the annexin A5 two-dimensional crystal on supported lipid bilayers

Protein nanoarrays are regularly ordered patterns of proteins fixed on a solid surface with a periodicity on the order of nanometers. They have significant potential applications as highly sensitive bioassays and biosensors. While several researchers have demonstrated the fabrication of protein nanoarrays with lithographic techniques and programmed DNA nanostructures, it has been difficult to fabricate a protein nanoarray containing a massive number of proteins on the surface. We now report the fabrication of nanoarrays of streptavidin molecules using a two-dimensional (2D) crystal of annexin A5 as a template on supported lipid bilayers that are widely used as cell membranes. The 2D crystal of annexin A5 has a six-fold symmetry with a period of about 18 nm. There is a hollow of a diameter of about 10 nm in the unit cell, surrounded by six trimers of annexin A5. We found that a hollow accommodates up to three streptavidin molecules with their orientation controlled, and confirmed that the molecules in the hollow maintain their specific binding capability to biotinylated molecules, which demonstrates that the fabricated nanoarray serves as an effective biosensing platform. This methodology can be directly applied to the fabrication of nanoarrays containing a massive number of any other protein molecules.

Microcontact Printing of Biomolecules on Various Polymeric Substrates: Limitations and Applicability for Fluorescence Microscopy and Subcellular Micropatterning Assays

Polymeric materials play an emerging role in biosensing interfaces. Within this regard, polymers can serve as a superior surface for binding and printing of biomolecules. In this study, we characterized 11 different polymer foils [cyclic olefin polymer (COP), cyclic olefin copolymer (COC), polymethylmethacrylate (PMMA), DI-Acetate, Lumirror 4001, Melinex 506, Melinex ST 504, polyamide 6, polyethersulfone, polyether ether ketone, and polyimide] to test for the applicability for surface functionalization, biomolecule micropatterning, and fluorescence microscopy approaches. Pristine polymer foils were characterized via UV-vis spectroscopy. Functional groups were introduced by plasma activation and epoxysilane-coating. Polymer modification was evaluated by water contact angle measurement and X-ray photoelectron spectroscopy. Protein micropatterns were fabricated using microcontact printing. Functionalized substrates were characterized via fluorescence contrast measurements using epifluorescence and total internal reflection fluorescence microscopy. Results showed that all polymer substrates could be chemically modified with epoxide functional groups, as indicated by reduced water contact angles compared to untreated surfaces. However, transmission and refractive index measurements revealed differences in important optical parameters, which was further proved by fluorescence contrast measurements of printed biomolecules. COC, COP, and PMMA were identified as the most promising alternatives to commonly used glass coverslips, which also showed superior applicability in subcellular micropatterning experiments.

Nanoscale Biocompatible Structures Generated from Fluorinated Tripodal Phenylenes on Gold Nanoprisms

Modification of gold substrates with a stable, uniform and ultrathin layer of biocompatible materials is of tremendous interest for the development of bio-devices. We present the fabrication of hybrid systems consisting of triangular prism gold nanoparticles (Au@NTPs) covalently covered with tripod-shaped oligo(p-phenylenes) featuring trifluoromethyl groups. Their synthesis is accomplished using a biphenyl boronic ester as the key compound. Au@NTPs were prepared through a seedless procedure using 3-butenoic acid and benzyldimethyl ammonium chloride, and modified with aminothiol groups. Coverage of this amine-modified gold substrate with a self-assembled monolayer (SAM) of tripod-shaped molecules is carried out in ethanolic solution. The hybrid system avoids up to 70 % of protein corona formation, and allows unspecific attachment for bulky adsorbates, providing an optimal biosensing platform. Chemical composition and morphology are analyzed by transmission electron microscopy (TEM), UV-visible spectroscopy and field emission scanning electron microscopy (FESEM).

A Simplified and Robust Activation Procedure of Glass Surfaces for Printing Proteins and Subcellular Micropatterning Experiments

Depositing biomolecule micropatterns on solid substrates via microcontact printing (µCP) usually requires complex chemical substrate modifications to initially create reactive surface groups. Here, we present a simplified activation procedure for untreated solid substrates based on a commercial polymer metal ion coating (AnteoBind^TM Biosensor reagent) that allows for direct µCP and the strong attachment of proteins via avidity binding. In proof-of-concept experiments, we identified the optimum working concentrations of the surface coating, characterized the specificity of protein binding and demonstrated the suitability of this approach by subcellular micropatterning experiments in living cells. Altogether, this method represents a significant enhancement and simplification of existing µCP procedures and further increases the accessibility of protein micropatterning for cell biological research questions.

A Fast and Simple Contact Printing Approach to Generate 2D Protein Nanopatterns

Protein micropatterning has become an important tool for many biomedical applications as well as in academic research. Current techniques that allow to reduce the feature size of patterns below 1 μm are, however, often costly and require sophisticated equipment. We present here a straightforward and convenient method to generate highly condensed nanopatterns of proteins without the need for clean room facilities or expensive equipment. Our approach is based on nanocontact printing and allows for the fabrication of protein patterns with feature sizes of 80 nm and periodicities down to 140 nm. This was made possible by the use of the material X-poly(dimethylsiloxane) (X-PDMS) in a two-layer stamp layout for protein printing. In a proof of principle, different proteins at various scales were printed and the pattern quality was evaluated by atomic force microscopy (AFM) and super-resolution fluorescence microscopy.

Spatial Control of Biological Ligands on Surfaces Applied to T Cell Activation

In this chapter, we present techniques, based on molecular-scale nanofabrication and selective self-assembly, for the presentation of biomolecules of interest (ligands, receptors, etc.) on a surface with precise spatial control and arbitrary geometry at the single-molecule level. Metallic nanodot arrays are created on glass coverslips and are then used as anchors for the immobilization of biological ligands via thiol linking chemistry. The nanodot size is controlled by both lithography and metallization. The reagent concentration in self-assembly can be adjusted to ensure single-molecule occupancy for a given dot size. The surrounding glass is backfilled by a protein-repellent layer to prevent nonspecific adsorption. Moreover, bifunctional surfaces are created, whereby a second ligand is presented on the background, which is frequently a requirement for simulating complex cellular functions involving more than one key ligand. This platform serves as a novel and powerful tool for molecular and cellular biology, e.g., to study the fundamental mechanisms of receptor-mediated signaling.

Polarization-resolved mechanistic investigation of fluorescence signal intensification on zinc oxide nanorod ends

The superior optical properties of zinc oxide nanorods (ZnO NRs) have continued to promote their broad use in photonic, photoelectric, light detecting, and biosensing applications. One particularly important property pertinent to biodetection is fluorescence intensification on nanorod ends (FINE), a phenomenon in which a highly spatially localized and strongly intensified fluorescence signal with its extended photostability at the NR ends is seen from the emission profiles of fluorophore-coupled biomolecules on ZnO NRs. Therefore, understanding key parameters affecting the FINE phenomenon and the degree of FINE (DoF) is critical for their applications in biosensors. In this study, we describe in detail the outcomes of polarization-resolved measurements by systematically considering the polarization effects on FINE and DoF as a function of NR tilt angle and position along the NR. Specifically, we elucidate the exact roles of the different states of light polarization in FINE and quantitatively determine the explicit contributions arising from distinctive polarization states to the DoF. We confirm that the presence of the FINE phenomenon is ubiquitous from the fluorophore-coupled ZnO NR systems, regardless of the polarization setting. We subsequently show that DoF is significantly affected by the light-matter interaction geometry. We reveal the specific polarization conditions that contribute dominantly to the FINE effect. The highest DoF from a NR and the greatest NR end intensity can be achieved when both the excitation and collection polarization states are perpendicular to the NR main axis. Insights from this study provide valuable design principles for selecting the polarization state and light-matter interaction geometry to attain maximum FINE as well as DoF on ZnO NRs. The precise understanding of polarization-derived consequences on FINE and DoF manifested differently as a function of the position on individual NRs can also be important for warranting accurate interpretation and quantification of the position-dependent, fluorophore-emitted signals on single ZnO NRs. Hence, our findings from this study can be extremely beneficial in fluorescence-based sensing and detection settings utilizing polarization.

Analytical Protein Microarrays: Advancements Towards Clinical Applications

Protein microarrays represent a powerful technology with the potential to serve as tools for the detection of a broad range of analytes in numerous applications such as diagnostics, drug development, food safety, and environmental monitoring. Key features of analytical protein microarrays include high throughput and relatively low costs due to minimal reagent consumption, multiplexing, fast kinetics and hence measurements, and the possibility of functional integration. So far, especially fundamental studies in molecular and cell biology have been conducted using protein microarrays, while the potential for clinical, notably point-of-care applications is not yet fully utilized. The question arises what features have to be implemented and what improvements have to be made in order to fully exploit the technology. In the past we have identified various obstacles that have to be overcome in order to promote protein microarray technology in the diagnostic field. Issues that need significant improvement to make the technology more attractive for the diagnostic market are for instance: too low sensitivity and deficiency in reproducibility, inadequate analysis time, lack of high-quality antibodies and validated reagents, lack of automation and portable instruments, and cost of instruments necessary for chip production and read-out. The scope of the paper at hand is to review approaches to solve these problems.

Microcontact printing with aminosilanes: creating biomolecule micro- and nanoarrays for multiplexed microfluidic bioassays

Aqueous based microcontact printing (μCP) to create micro- and nanoarrays of (3-aminopropyl)triethoxysilane (APTES) on glass substrates of microfluidic devices for covalent immobilization of DNA aptamers and antibodies.

Molecular Occupancy of Nanodot Arrays

Single-molecule nanodot arrays, in which a biomolecule of choice (protein, nucleic acid, etc.) is bound to a metallic nanoparticle on a solid substrate, are becoming an increasingly important tool in the study of biomolecular and cellular interactions. We have developed an on-chip measurement protocol to monitor and control the molecular occupancy of nanodots. Arrays of widely spaced nanodots and nanodot clusters were fabricated on glass surfaces by nanolithography and functionalized with fluorescently labeled proteins. The molecular occupancy was determined by monitoring individual fluorophore bleaching events, while accounting for fluorescence quenching effects. We found that the occupancy can be interpreted as a packing problem, and depends on nanodot size and binding ligand concentration, where the latter is easily adjusted to compensate the flexibility of dimension control in nanofabrication. The results are scalable with nanodot cluster size, extending to large area close packed arrays. As an example, the nanoarray platform was used to probe the geometric requirement of T-cell activation at the single-molecule level.

Genetic fusion of single-chain variable fragments to partial spider silk improves target detection in micro- and nanoarrays

Immobilizing biomolecules with retained functionality and stability on solid supports is crucial for generation of sensitive immunoassays. However, upon use of conventional immobilization strategies, a major portion of the biomolecules (e.g. antibodies) frequently tends to lose their bioactivity. In this study, we describe a procedure to immobilize human single-chain variable fragment (scFv) via genetic fusion to partial spider silk, which have a high tendency to adhere to solid supports. Two scFvs, directed towards serum proteins, were genetically fused to partial spider silk proteins and expressed as silk fusion proteins in E. coli. Antigen binding ability of scFvs attached to a partial silk protein denoted RC was investigated using microarray analysis, whereas scFvs fused to the NC silk variant were examined using nanoarrays. Results from micro- and nanoarrays confirmed the functionality of scFvs attached to both RC and NC silk, and also for binding of targets in crude serum. Furthermore, the same amount of added scFv gives higher signal intensity when immobilized via partial spider silk compared to when immobilized alone. Together, the results suggest that usage of scFv-silk fusion proteins in immunoassays could improve target detection, in the long run enabling novel biomarkers to be detected in crude serum proteomes.

Miniaturization of multiplexed planar recombinant antibody arrays for serum protein profiling

BACKGROUND

Antibody-based microarrays are a developing tool for high-throughput proteomics in health and disease. However, in order to enable global proteome profiling, novel miniaturized high-density antibody array formats must be developed.

RESULTS

In this proof-of-concept study, we have designed a miniaturized planar recombinant (single-chain Fragment variable). antibody array technology platform for multiplexed profiling of non-fractionated, directly labelled serum samples. The size of the individual spot features was reduced 225-times (78.5 μm(2)/spot) and the array density was increased 19-times (38,000 spots/cm(2)). These miniaturized, multiplexed arrays were produced, using a desktop nanofabrication system based on dip-pen nanolithography technology, and interfaced with a high-resolution fluorescent-based scanner. The reproducibility, sensitivity, specificity, and applicability of the set-up were demonstrated by profiling a set of well-characterized serum samples.

CONCLUSION

The designed antibody array platform opens up new possibilities for large-scale, multiplex profiling of crude proteomes in a miniaturized fashion.

Insight into factors affecting the presence, degree, and temporal stability of fluorescence intensification on ZnO nanorod ends

We have carried out a combined experimental and simulation study identifying the key physical and optical parameters affecting the presence and degree of fluorescence intensification measured on zinc oxide nanorod (ZnO NR) ends. Previously, we reported on the highly localized, intensified, and prolonged fluorescence signal measured on the NR ends, termed fluorescence intensification on NR ends (FINE). As a step towards understanding the mechanism of FINE, the present study aims to provide insight into the unique optical phenomenon of FINE through experimental and simulation approaches and to elucidate the key factors affecting the occurrence, degree, and temporal stability of FINE. Specifically, we examined the effect of the length, width, and growth orientation of single ZnO NRs on the NR-enhanced biomolecular emission profile after decorating the NR surfaces with different amounts and types of fluorophore-coupled protein molecules. We quantitatively and qualitatively profiled the biomolecular fluorescence signal from individual ZnO NRs as a function of both position along the NR long axis and time. Regardless of the physical dimensions and growth orientations of the NRs, we confirmed the presence of FINE in all ZnO NRs tested by using a range of protein concentrations. We also showed that the manifestation of FINE is not dependent on the spectroscopic signatures of the fluorophores employed. We further observed that the degree of FINE is dependent on the length of the NR with longer NRs showing increased levels of FINE. We also demonstrated that vertically oriented NRs exhibit much stronger fluorescence intensity at the NR ends and a higher level of FINE than the laterally oriented NRs. Additionally, we employed finite-difference time-domain (FDTD) methods to understand the experimental outcomes and to promote our understanding of the mechanism of FINE. Particularly, we utilized the electrodynamic simulations to examine both near-field and far-field emission characteristics when considering various scenarios of fluorophore locations, polarizations, spectroscopic characteristics, and NR dimensions. Our efforts may provide deeper insight into the unique optical phenomenon of FINE and further be beneficial to highly miniaturized biodetection favoring the use of single ZnO NRs in low-volume and high-throughput protein assays.

Array-based proteomic approaches to study signal transduction pathways: prospects, merits and challenges

Very often dysfunctional aspects of various signalling networks are found to be associated with human diseases and disorders. The major characteristics of signal transduction pathways are specificity, amplification of the signal, desensitisation and integration, which is accomplished not solely, but majorly by proteins. Array-based profiling of protein-protein and other biomolecular interactions is a versatile approach, which holds immense potential for multiplex interactome mapping and provides an inclusive representation of the signal transduction pathways and networks. Protein microarrays such as analytical protein microarrays (antigen-antibody interactions, autoantibody screening), RP microarrays (interaction of a particular ligand with all the possible targets in cell), functional protein microarrays (protein-protein or protein-ligand interactions) are implemented for various applications, including analysis of protein interactions and their significance in signalling cascades. Additionally, successful amalgamation of the array-based approaches with different label-free detection techniques allows real-time analysis of interaction kinetics of multiple interaction events simultaneously. This review discusses the prospects, merits and limitations of different variants of array-based techniques and their promising applications for studying the modifications and interactions of biomolecules, and highlights the studies associated with signal transduction pathways and their impact on disease pathobiology.

Amphipols for each season

Amphipols (APols) are short amphipathic polymers that can substitute for detergents at the transmembrane surface of membrane proteins (MPs) and, thereby, keep them soluble in detergent free aqueous solutions. APol-trapped MPs are, as a rule, more stable biochemically than their detergent-solubilized counterparts. APols have proven useful to produce MPs, most noticeably by assisting their folding from the denatured state obtained after solubilizing MP inclusion bodies in either SDS or urea. They facilitate the handling in aqueous solution of fragile MPs for the purpose of proteomics, structural and functional studies, and therapeutics. Because APols can be chemically labeled or functionalized, and they form very stable complexes with MPs, they can also be used to functionalize those indirectly, which opens onto many novel applications. Following a brief recall of the properties of APols and MP/APol complexes, an update is provided of recent progress in these various fields.

Generation of miniaturized planar ecombinant antibody arrays using a microcantilever-based printer

Miniaturized (Ø 10 μm), multiplexed (>5-plex), and high-density (>100 000 spots cm(-2)) antibody arrays will play a key role in generating protein expression profiles in health and disease. However, producing such antibody arrays is challenging, and it is the type and range of available spotters which set the stage. This pilot study explored the use of a novel microspotting tool, Bioplume(TM)-consisting of an array of micromachined silicon cantilevers with integrated microfluidic channels-to produce miniaturized, multiplexed, and high-density planar recombinant antibody arrays for protein expression profiling which targets crude, directly labelled serum. The results demonstrated that 16-plex recombinant antibody arrays could be produced-based on miniaturized spot features (78.5 um(2), Ø 10 μm) at a 7-125-times increased spot density (250 000 spots cm(-2)), interfaced with a fluorescent-based read-out. This prototype platform was found to display adequate reproducibility (spot-to-spot) and an assay sensitivity in the pM range. The feasibility of the array platform for serum protein profiling was outlined.

Multiplexing of miniaturized planar antibody arrays for serum protein profiling--a biomarker discovery in SLE nephritis

In the quest to decipher disease-associated biomarkers, miniaturized and multiplexed antibody arrays may play a central role in generating protein expression profiles, or protein maps, of crude serum samples. In this conceptual study, we explored a novel, 4-times larger pen design, enabling us to, in a unique manner, simultaneously print 48 different reagents (antibodies) as individual 78.5 μm(2) (10 μm in diameter) sized spots at a density of 38,000 spots cm(-2) using dip-pen nanolithography technology. The antibody array set-up was interfaced with a high-resolution fluorescent-based scanner for sensitive sensing. The performance and applicability of this novel 48-plex recombinant antibody array platform design was demonstrated in a first clinical application targeting SLE nephritis, a severe chronic autoimmune connective tissue disorder, as the model disease. To this end, crude, directly biotinylated serum samples were targeted. The results showed that the miniaturized and multiplexed array platform displayed adequate performance, and that SLE-associated serum biomarker panels reflecting the disease process could be deciphered, outlining the use of miniaturized antibody arrays for disease proteomics and biomarker discovery.

A step closer to membrane protein multiplexed nanoarrays using biotin-doped polypyrrole

Whether for fundamental biological research or for diagnostic and drug discovery applications, protein micro- and nanoarrays are attractive technologies because of their low sample consumption, high-throughput, and multiplexing capabilities. However, the arraying platforms developed so far are still not able to handle membrane proteins, and specific methods to selectively immobilize these hydrophobic and fragile molecules are needed to understand their function and structural complexity. Here we integrate two technologies, electropolymerization and amphipols, to demonstrate the electrically addressable functionalization of micro- and nanosurfaces with membrane proteins. Gold surfaces are selectively modified by electrogeneration of a polymeric film in the presence of biotin, where avidin conjugates can then be selectively immobilized. The method is successfully applied to the preparation of protein-multiplexed arrays by sequential electropolymerization and biomolecular functionalization steps. The surface density of the proteins bound to the electrodes can be easily tuned by adjusting the amount of biotin deposited during electropolymerization. Amphipols are specially designed amphipathic polymers that provide a straightforward method to stabilize and add functionalities to membrane proteins. Exploiting the strong affinity of biotin for streptavidin, we anchor distinct membrane proteins onto different electrodes via a biotin-tagged amphipol. Antibody-recognition events demonstrate that the proteins are stably immobilized and that the electrodeposition of polypyrrole films bearing biotin units is compatible with the protein-binding activity. Since polypyrrole films show good conductivity properties, the platform described here is particularly well suited to prepare electronically transduced bionanosensors.

Unique temporal and spatial biomolecular emission profile on individual zinc oxide nanorods

Zinc oxide nanorods (ZnO NRs) have emerged in recent years as extremely useful, optical signal-enhancing platforms in DNA and protein detection. Although the use of ZnO NRs in biodetection has been demonstrated so far in systems involving many ZnO NRs per detection element, their future applications will likely take place in a miniaturized setting while exploiting single ZnO NRs in a low-volume, high-throughput bioanalysis. In this paper, we investigate temporal and spatial characteristics of the biomolecular fluorescence on individual ZnO NR systems. Quantitative and qualitative examinations of the biomolecular intensity and photostability are carried out as a function of two important criteria, the time and position along the long axis (length) of NRs. Photostability profiles are also measured with respect to the position on NRs and compared to those characteristics of biomolecules on polymeric control platforms. Unlike the uniformly distributed signal observed on the control platforms, both the fluorescence intensity and photostability are position-dependent on individual ZnO NRs. We have identified a unique phenomenon of highly localized, fluorescence intensification on the nanorod ends (FINE) of well-characterized, individual ZnO nanostructures. When compared to the polymeric controls, the biomolecular fluorescence intensity and photostability are determined to be higher on individual ZnO NRs regardless of the position on NRs. We have also carried out finite-difference time-domain simulations the results of which are in good agreement with the observed FINE. The outcomes of our investigation will offer a much needed basis for signal interpretation for biodetection devices and platforms consisting of single ZnO NRs and, at the same time, contribute significantly to provide insight in understanding the biomolecular fluorescence observed from ZnO NR ensemble-based systems.

Antibody array generation and use

Affinity proteomics, represented by antibody arrays, is a multiplex technology for high-throughput protein expression profiling of crude proteomes in a highly specific, sensitive, and miniaturized manner. The antibodies are individually deposited in an ordered pattern, an array, onto a solid support. Next, the sample is added, and any specifically bound proteins are detected and quantified using mainly fluorescence as the mode of detection. The binding pattern is then converted into a relative protein expression map, or protein atlas, delineating the composition of the sample at the molecular level. The technology provides unique opportunities for various applications, such as protein expression profiling, biomarker discovery, disease diagnostics, prognostics, evidence-based therapy selection, and disease monitoring. Here, we describe the generation and use of planar antibody arrays for serum protein profiling.

Recombinant antibody microarray for profiling the serum proteome of SLE

Systemic lupus erythematosus (SLE) is a severe autoimmune connective tissue disease. Our current knowledge about the serum proteome, or serum biomarker panels, reflecting disease and disease status is still very limited. Affinity proteomics, represented by recombinant antibody arrays, is a novel, multiplex technology for high-throughput protein expression profiling of crude serum proteomes in a highly specific, sensitive, and miniaturized manner. The antibodies are deposited one by one in an ordered pattern, an array, onto a solid support. Next, the sample is added, and any specifically bound proteins are detected and quantified. The binding pattern is then converted into a relative protein expression map, or protein map, deciphering the composition of the sample at the molecular level. The methodology provides unique opportunities for delineating serum biomarkers reflecting SLE, thus paving the way for improved diagnosis, classification, and prognosis.

Vertical nanowire arrays as a versatile platform for protein detection and analysis

Protein microarrays are valuable tools for protein assays. Reducing spot sizes from micro- to nano-scale facilitates miniaturization of platforms and consequently decreased material consumption, but faces inherent challenges in the reduction of fluorescent signals and compatibility with complex solutions. Here we show that vertical arrays of nanowires (NWs) can overcome several bottlenecks of using nanoarrays for extraction and analysis of proteins. The high aspect ratio of the NWs results in a large surface area available for protein immobilization and renders passivation of the surface between the NWs unnecessary. Fluorescence detection of proteins allows quantitative measurements and spatial resolution, enabling us to track individual NWs through several analytical steps, thereby allowing multiplexed detection of different proteins immobilized on different regions of the NW array. We use NW arrays for on-chip extraction, detection and functional analysis of proteins on a nano-scale platform that holds great promise for performing protein analysis on minute amounts of material. The demonstration made here on highly ordered arrays of indium arsenide (InAs) NWs is generic and can be extended to many high aspect ratio nanostructures.

Nano-anchors with single protein capacity produced with STED lithography

Acrylate nanoanchors of subdiffraction-limited diameter are written with optical stimulated emission depletion (STED) lithography. After incubation, 98% of all nanoanchors are loaded quickly with fluorescently labeled antibodies. Controlling the size of the nanoanchors allows for limiting the number of the antibodies. Direct stochastic optical reconstruction microscopy (dSTORM) imaging, statistical distribution of fluorescence, quantitative fluorescence readout, and single molecule blinking consistently prove that 80% of the nanoanchors with a 65 nm diameter are carrying only one antibody each, which are functional as confirmed with live erythrocytes.

Nanosphere lithography-based platform for developing rapid and high sensitivity microarray systems

A novel gold nanoarray (NA)-based platform was developed for microarray applications. This novel approach is based upon the principle of nanosphere lithography and can be used for one-step antibody immobilization. The developed platform was checked by functionalizing with cysteine followed by capturing biotinylated antibody and detecting it with dye-conjugated steptravidin. An immunoassay was performed with spiked samples containing human fetuin A antigen. The minimum limits of detection (LOD) of human fetuin A for NA-based and conventional microarray platforms were 50 pg/mL and 50 ng/mL, respectively. The developed approach was highly reproducible and unlike conventional microarray approaches the use of a spotting system was omitted because immobilization was controlled and directed on the predefined arrays. This approach could be an ideal alternative for developing microarrays. And, the ease of the strategy also allows the high throughput production of the microarrays.

Selected reaction monitoring-based proteomics: workflows, potential, pitfalls and future directions

Selected reaction monitoring (SRM) is a targeted mass spectrometry technique that is emerging in the field of proteomics as a complement to untargeted shotgun methods. SRM is particularly useful when predetermined sets of proteins, such as those constituting cellular networks or sets of candidate biomarkers, need to be measured across multiple samples in a consistent, reproducible and quantitatively precise manner. Here we describe how SRM is applied in proteomics, review recent advances, present selected applications and provide a perspective on the future of this powerful technology.

Single-molecule protein arrays enabled by scanning probe block copolymer lithography

The ability to control the placement of individual protein molecules on surfaces could enable advances in a wide range of areas, from the development of nanoscale biomolecular devices to fundamental studies in cell biology. Such control, however, remains a challenge in nanobiotechnology due to the limitations of current lithographic techniques. Herein we report an approach that combines scanning probe block copolymer lithography with site-selective immobilization strategies to create arrays of proteins down to the single-molecule level with arbitrary pattern control. Scanning probe block copolymer lithography was used to synthesize individual sub-10-nm single crystal gold nanoparticles that can act as scaffolds for the adsorption of functionalized alkylthiol monolayers, which facilitate the immobilization of specific proteins. The number of protein molecules that adsorb onto the nanoparticles is dependent upon particle size; when the particle size approaches the dimensions of a protein molecule, each particle can support a single protein. This was demonstrated with both gold nanoparticle and quantum dot labeling coupled with transmission electron microscopy imaging experiments. The immobilized proteins remain bioactive, as evidenced by enzymatic assays and antigen-antibody binding experiments. Importantly, this approach to generate single-biomolecule arrays is, in principle, applicable to many parallelized cantilever and cantilever-free scanning probe molecular printing methods.

Recent advances in molecular technologies and their application in pathogen detection in foods with particular reference to yersinia

Yersinia enterocolitica is an important zoonotic pathogen that can cause yersiniosis in humans and animals. Food has been suggested to be the main source of yersiniosis. It is critical for the researchers to be able to detect Yersinia or any other foodborne pathogen with increased sensitivity and specificity, as well as in real-time, in the case of a foodborne disease outbreak. Conventional detection methods are known to be labor intensive, time consuming, or expensive. On the other hand, more sensitive molecular-based detection methods like next generation sequencing, microarray, and many others are capable of providing faster results. DNA testing is now possible on a single molecule, and high-throughput analysis allows multiple detection reactions to be performed at once, thus allowing a range of characteristics to be rapidly and simultaneously determined. Despite better detection efficiencies, results derived using molecular biology methods can be affected by the various food matrixes. With the improvements in sample preparation, data analysis, and testing procedures, molecular detection techniques will likely continue to simplify and increase the speed of detection while simultaneously improving the sensitivity and specificity for tracking pathogens in food matrices.

A simple and sensitive assay for measuring very small volumes of microprinted solutions

This study describes an extremely sensitive and simple assay to measure small volumes of solutions, <1 nL. The assay takes advantage of the Sandell-Kolthoff reaction in which yellow cerium(IV) is reduced to colorless cerium(III) in the presence of arsenic(III) and catalytic quantities of iodide ion. The reaction is linear with respect to the rate of Ce(IV) reduction and the quantity of I⁻ present. Typical assays can measure 10–100 picomoles of iodide in a sample. When I⁻ is substituted for chloride ion in standard biological buffers, such as Tris-buffered saline, the assay can be used to determine the volume of solution printed in a microarray.

Fabricating protein immunoassay arrays on nitrocellulose using dip-pen lithography techniques

Advancements in lithography methods for printing biomolecules on surfaces are proving to be potentially beneficial for disease screening and biological research. Dip-pen nanolithography (DPN) is a versatile micro and nanofabrication technique that has the ability to produce functional biomolecule arrays. The greatest advantage, with respect to the printing mechanism, is that DPN adheres to the sensitive mild conditions required for biomolecules such as proteins. We have developed an optimised, high-throughput printing technique for fabricating protein arrays using DPN. This study highlights the fabrication of a prostate specific antigen (PSA) immunoassay detectable by fluorescence. Spot sizes are typically no larger than 8 μm in diameter and limits of detection for PSA are comparable with a commercially available ELISA kit. Furthermore, atomic force microscopy (AFM) analysis of the array surface gives great insight into how the nitrocellulose substrate functions to retain protein integrity. This is the first report of protein arrays being printed on nitrocellulose using the DPN technique and the smallest feature size yet to be achieved on this type of surface. This method offers a significant advance in the ability to produce dense protein arrays on nitrocellulose which are suitable for disease screening using standard fluorescence detection.

Serum protein profiling of systemic lupus erythematosus and systemic sclerosis using recombinant antibody microarrays

Systemic lupus erythematosus (SLE) and systemic sclerosis (SSc) are two severe autoimmune connective tissue diseases. The fundamental knowledge about their etiology is limited and the conditions display complex pathogenesis, multifaceted presentations, and unpredictable courses. Despite significant efforts, the lack of fully validated biomarkers enabling diagnosis, classification, and monitoring of disease activity represents significant unmet clinical needs. In this discovery study, we have for the first time used recombinant antibody microarrays for miniaturized, multiplexed serum protein profiling of SLE and SSc, targeting mainly immunoregulatory proteins. The data showed that several candidate SLE-associated multiplexed serum biomarker signatures were delineated, reflecting disease (diagnosis), disease severity (phenotypic subsets), and disease activity. Selected differentially expressed markers were validated using orthogonal assays and a second, independent patient cohort. Further, biomarker signatures differentiating SLE versus SSc were demonstrated, and the observed differences increased with severity of SLE. In contrast, the data showed that the serum profiles of SSc versus healthy controls were more similar. Hence, we have shown that affinity proteomics could be used to de-convolute crude, nonfractionated serum proteomes, extracting molecular portraits of SLE and SSc, further enhancing our fundamental understanding of these complex autoimmune conditions.

Recombinant antibodies for the generation of antibody arrays

Affinity proteomics, mainly represented by antibody microarrays, has in recent years been established as a powerful tool for high-throughput (disease) proteomics. The technology can be used to generate detailed protein expression profiles, or protein maps, of focused set of proteins in crude proteomes and potentially even high-resolution portraits of entire proteomes. The technology provides unique opportunities, for example biomarker discovery, disease diagnostics, patient stratification and monitoring of disease, and taking the next steps toward personalized medicine. However, the process of designing high-performing, high-density antibody micro- and nanoarrays has proven to be challenging, requiring truly cross-disciplinary efforts to be adopted. In this mini-review, we address one of these key technological issues, namely, the choice of probe format, and focus on the use of recombinant antibodies vs. polyclonal and monoclonal antibodies for the generation of antibody arrays.

Oriented immobilization of prion protein demonstrated via precise interfacial nanostructure measurements

Nanopatterning of biomolecules on functionalized surfaces offers an excellent route for ultrasensitive protein immobilization, for interaction measurements, and for the fabrication of devices such as protein nanoarrays. An improved understanding of the physics and chemistry underlying the device properties and the recognition process is necessary for performance optimization. This is especially important for the recognition and immobilization of intrinsically disordered proteins (IDPs), like the prion protein (PrP), a partial IDP, whose folding and stability may be influenced by local environment and confinement. Atomic force microscopy allows for both highly controllable nanolithography and for sensitive and accurate direct detection, via precise topographic measurements on ultraflat surfaces, of protein interactions in a liquid environment, thus different environmental parameters affecting the biorecognition phenomenon can be investigated in situ. Using nanografting, a tip-induced lithographic technique, and an affinity immobilization strategy based on two different histidine tagged antibodies, with high nM affinity for two different regions of PrP, we successfully demonstrated the immobilization of recombinant mouse PrP onto nanostructured surfaces, in two different orientations. Clear discrimination of the two molecular orientations was shown by differential height (i.e., topographic) measurements, allowing for the estimation of binding parameters and the full characterization of the nanoscale biorecognition process. Our work opens the way to several high sensitivity diagnostic applications and, by controlling PrP orientation, allows for the investigation of unconventional interactions with partially folded proteins, and may serve as a platform for protein misfolding and refolding studies on PrP and other thermodynamically unstable, fibril forming, proteins.

Selective and direct immobilization of cysteinyl biomolecules by electrochemical cleavage of azo linkage

Controlled orientation and reserved activity of biomolecules, when site-selectively immobilized in a highly integrated manner on a minimal time scale, are crucial in designing biosensors for the multiplex detection. Here, we describe a novel method for the orientation-controlled immobilization of biomolecules based on site-selective electrochemical activation of p-hydroxyazobenzene self-assembled monolayer (SAM) followed by one-step coupling of cysteinyl biomolecules. The p-aminophenol, a product of reductive cleavage of p-hydroxyazobenzene, was subsequently oxidized to yield p-quinoneimine which then conjugated with cysteinyl biomolecules through 1,4-Michael addition, thus obviating additional linker agents and the related time consumption. Using this method, we selectively activated the electrode surface and immobilized laminin peptide IKVAV, a neurite promoting motif. When we cultured hippocampal neurons on the electrode, the extended neurites were found only within the electrochemically activated area. Hence, the proposed method represents a new promising platform for the patterning of functional peptides, active proteins, and live cells.

Label-free detection techniques for protein microarrays: prospects, merits and challenges

Protein microarrays, on which thousands of discrete proteins are printed, provide a valuable platform for functional analysis of the proteome. They have been widely used for biomarker discovery and to study protein–protein interactions. The accomplishments of DNA microarray technology, which had enabled massive parallel studies of gene expression, sparked great interest for the development of protein microarrays to achieve similar success at the protein level. Protein microarray detection techniques are often classified as being label‐based and label‐free. Most of the microarray applications have employed labelled detection such as fluorescent, chemiluminescent and radioactive labelling. These labelling strategies have synthetic challenges, multiple label issues and may exhibit interference with the binding site. Therefore, development of sensitive, reliable, high‐throughput, label‐free detection techniques are now attracting significant attention. Label‐free detection techniques monitor biomolecular interactions and simplify the bioassays by eliminating the need for secondary reactants. Moreover, they provide quantitative information for the binding kinetics. In this article, we will review several label‐free techniques, which offer promising applications for the protein microarrays, and discuss their prospects, merits and challenges.

FRET detection of Octamer-4 on a protein nanoarray made by size-dependent self-assembly

An alternative approach for fabricating a protein array at nanoscale is suggested with a capability of characterization and/or localization of multiple components on a nanoarray. Fluorescent micro- and nanobeads each conjugated with different antibodies are assembled by size-dependent self-assembly (SDSA) onto nanometer wells that were created on a polymethyl methacrylate (PMMA) substrate by electron beam lithography (EBL). Antibody-conjugated beads of different diameters are added serially and electrostatically attached to corresponding wells through electrostatic attraction between the charged beads (confirmed by zeta potential analysis) and exposed p-doped silicon substrate underneath the PMMA layer. This SDSA method is enhanced by vibrated-wire-guide manipulation of droplets on the PMMA surface containing nanometer wells. Saturation rates of antibody-conjugated beads to the nanometer patterns are up to 97% under one component and 58-70% under two components nanoarrays. High-density arrays (up to 40,000 wells) could be fabricated, which can also be multi-component. Target detection utilizes fluorescence resonance energy transfer (FRET) from fluorescent beads to fluorescent-tagged secondary antibodies to Octamer-4 (Oct4), which eliminates the need for multiple steps of rinsing. The 100 nm green beads are covalently conjugated with anti-Oct4 to capture Oct4 peptides (39 kDa); where the secondary anti-Oct4 and F(ab)(2) fragment of anti-gIgG tagged with phycoerythrin are then added to function as an indicator of Oct4 detection. FRET signals are detected through confocal microscopes, and further confirmed by Fluorolog3 spectrofluorometer. The success rates of detecting Oct4 are 32% and 14% of the beads in right place under one and two component nanoarrays, respectively. Ratiometric FRET is used to quantify the amount of Oct4 peptides per each bead, which is estimated about 2 molecules per bead.

[The future of antibody fragments, made of a single immunoglobulin domain]

Monoclonal antibodies are now established as key therapeutics for a range of diseases including cancer and auto-immunity. However, despite important improvements, these molecules still face several serious limitations including production costs and tumor penetration. A new class of antibody fragments, made of a single immunoglobulin domain, is emerging as an exciting alternative. This review describes the outstanding properties and the first achievements of these domain antibodies.

An immunoassay method for quantitative detection of proteins using single antibodies

A new immunoassay method called specific analyte labeling and recapture assay (SALRA) to quantitatively measure protein abundance was developed, and the assay conditions were optimized. The key features of this method include labeling the antigen bound to the capture antibody, eluting the labeled antigen, and recapturing it by the same capture antibody on the detection plate. The reporter molecules on the labeled antigen provide a convenient and reliable means for signal detection. We demonstrated that the dose-response curve of SALRA was comparable to that of sandwich enzyme-linked immunosorbent assay (ELISA) and better than that of the antigen direct labeling method. In addition, multiple proteins can be measured simultaneously by SALRA. Using the SALRA method, the detection limit for most of the cytokines tested was approximately 0.01ng/ml. Further SALRA tests on interleukin 6 (IL-6) showed the linear dose-response was 3.3 to 0.01ng/ml, the accuracy of the test was 71 to 91%, the intraassay variation was 3.6 to 7.4%, and the interassay variation was 3.8 to 10.0%. The applications of SALRA include quantitatively measuring proteins for which there are no ELISA tools available and providing a new platform for protein microarrays.

Attovial-based antibody nanoarrays

Antibody array-based technology is a powerful emerging tool in proteomics, but to enable global proteome analysis, antibody array layouts with even higher density has to be developed. To this end, we have further developed the first generation of a nanoarray platform, based on attoliter-sized vials, attovials, which we have characterized and used for the detection of complement factor C1q in human serum samples. Finally, we demonstrated proof-of-concept for individual functionalization of the attovials with a recombinant antibody.