Drug delivery from the oral cavity: focus on a novel mechatronic delivery device

Intraoral medical devices for sustained drug delivery

OBJECTIVES

The oral cavity constitutes an attractive organ for the local and systemic application of drug substances. Oromucosal tablets, gels, or sprays are examples of the formulations applied. Due to the elution through the saliva, the residence time of the formulation at the application site is relatively short. Medical devices placed in the oral cavity, with a reservoir for an active substance, play an important role in solving this problem.

MATERIALS AND METHODS

In this review, we discuss the devices described in the literature that are designed to be used in the oral cavity, highlighting the advantages, disadvantages, and clinical applications of each of them.

RESULTS

Among the intraoral medical devices, special types are personalized 3D-printed devices, iontophoretic devices, and microneedle patches.

CONCLUSION

We anticipate that with the development of 3D printing and new polymers, the technology of flexible and comfortable devices for prolonged drug delivery in the oral cavity will develop intensively.

CLINICAL RELEVANCE

The presented review is therefore a useful summary of the current technological state, when in fact none of the existing devices has been widely accepted clinically.

Current and Future Nano-Carrier-Based Approaches in the Treatment of Alzheimer's Disease

It is a very alarming situation for the globe because 55 million humans are estimated to be affected by Alzheimer's disease (AD) worldwide, and still it is increasing at the rapid speed of 10 million cases per year worldwide. This is an urgent reminder for better research and treatment due to the unavailability of a permanent medication for neurodegenerative disorders like AD. The lack of drugs for neurodegenerative disorder treatment is due to the complexity of the structure of the brain, mainly due to blood-brain barrier, because blood-brain drug molecules must enter the brain compartment. There are several novel and conventional formulation approaches that can be employed for the transportation of drug molecules to the target site in the brain, such as oral, intravenous, gene delivery, surgically implanted intraventricular catheter, nasal and liposomal hydrogels, and repurposing old drugs. A drug's lipophilicity influences metabolic activity in addition to membrane permeability because lipophilic substances have a higher affinity for metabolic enzymes. As a result, the higher a drug's lipophilicity is, the higher its permeability and metabolic clearance. AD is currently incurable, and the medicines available merely cure the symptoms or slow the illness's progression. In the next 20 years, the World Health Organization (WHO) predicts that neurodegenerative illnesses affecting motor function will become the second-leading cause of mortality. The current article provides a brief overview of recent advances in brain drug delivery for AD therapy.

Amalgamation of Nanoparticles within Drug Carriers: A Synergistic Approach or a Futile Attempt?

In recent years, nanotechnology has gained much attention from scientists and significant advances in therapeutic potential. Nano-delivery systems have emerged as an effective way in order to improve the therapeutic properties of drugs including solubility, stability, prolongation of half-life as well as promoting the accumulation of drug at the target site. The nanoparticles have also been incorporated into various conventional drug delivery systems. This review study aims to introduce the amalgamation of nanoparticles into drug carriers. To overcome the limitations of single nanoparticles such as toxicity, high instability, rapid drug release as well as limited drug loading capacity, a multi-component system is developed. Liposomes, microparticles, nanofibers, dendrimers etc., are promising drug carriers, having some limitations that can be minimized, and the compilation of nanoparticles synergizes the properties. The amalgamated nanocarriers are used for the diagnostic purpose as well as treatment of various chronic diseases. It also increases the solubility of hydrophobic drugs. However, each system has its advantages and disadvantages based on its physicochemical properties, efficacy, and other parameters. This review details the past and present state of development for the fusion of nanoparticles within drug carriers and from which we identify future research works needed for the same.

Biocompatible and Biomaterials Application in Drug Delivery System in Oral Cavity

Biomaterials applications have rapidly expanded into different fields of sciences. One of the important fields of using biomaterials is dentistry, which can facilitate implantation, surgery, and treatment of oral diseases such as peri-implantitis, periodontitis, and other dental problems. Drug delivery systems based on biocompatible materials play a vital role in the release of drugs into aim tissues of the oral cavity with minimum side effects. Therefore, scientists have studied various delivery systems to improve the efficacy and acceptability of therapeutic approaches in dental problems and oral diseases. Also, biomaterials could be utilized as carriers in biocompatible drug delivery systems. For instance, natural polymeric substances, such as gelatin, chitosan, calcium phosphate, alginate, and xanthan gum are used to prepare different forms of delivery systems. In addition, some alloys are conducted in drug complexes for the better in transportation. Delivery systems based on biomaterials are provided with different strategies, although individual biomaterial has advantages and disadvantages which have a significant influence on transportation of complex such as solubility in physiological environments or distribution in tissues. Biomaterials have antibacterial and anti-inflammatory effects and prolonged time contact and even enhance antibiotic activities in oral infections. Moreover, these biomaterials are commonly prepared in some forms such as particulate complex, fibers, microspheres, gels, hydrogels, and injectable systems. In this review, we examined the application of biocompatible materials in drug delivery systems of oral and dental diseases or problems.

Pharmaceutical Perspective in Wearable Drug Delivery Systems

Humans have been dealing with health problems for millions of years. Normal health services need well-trained personnel and high-cost diagnostic tests, which forces patients to go to hospitals if medical treatment is required. To address this, prototype testing has been carried out into the wearable drug delivery health care perspectives. Researchers have devised a wide variety of formulations for the treatment of various diseases at home by performing real-time monitoring of different routes of drug administration such as ocular, transdermal, intraoral, intracochlear, and several more. A comprehensive review of the different types of wearable drug delivery systems with respect to their manufacturing, mechanism of action and specifications has been done. In the pharmaceutical context, these devices are technologically well-equipped interfaces for diverse physicochemical signals. Above mentioned information with a broader perspective has also been discussed in this article. Several wearable drug delivery systems have been introduced in the market in recent years. But a lot of testing needs to be conducted to address the numerous obstacles before the wearable devices are successfully launched in the market.

Treatment challenges and delivery systems in immunomodulation and probiotic therapies for periodontitis

Introduction: Periodontitis is a widespread illness that arises due to disrupted interplay between the oral microbiota and the host immune response. In some cases, conventional therapies can provide temporary remission, although this is often followed by disease relapse. Recent studies of periodontitis pathology have promoted the development of new therapeutics to improve treatment options, together with local application using advanced drug delivery systems.Areas covered: This paper provides a critical review of the status of current treatment approaches to periodontitis, with a focus on promising immunomodulation and probiotic therapies. These are based on delivery of small molecules, peptides, proteins, DNA or RNA, and probiotics. The key findings on novel treatment strategies and formulation of advanced delivery systems, such as nanoparticles and nanofibers, are highlighted.Expert opinion: Multitarget therapy based on antimicrobial, immunomodulatory, and probiotic active ingredients incorporated into advanced delivery systems for application to the periodontal pocket can improve periodontitis treatment outcomes. Translation of such adjuvant therapy from laboratory to patient is expected in the future.

Development of Chlorhexidine Digluconate and Lippia sidoides Essential Oil Loaded in Microemulsion for Disinfection of Dental Root Canals: Substantivity Profile and Antimicrobial Activity

The dental intracanal disinfection is crucial to achieve the success of endodontic treatment, avoiding the maintenance of endodontic infections. Chlorhexidine digluconate can act as an irrigating agent for it. However, it can cause tissue irritation in high concentrations. Therefore, combinations with other antimicrobial agents and more efficient therapeutic alternatives are studied, which make it possible to administer drugs more safely and with minimal adverse effects. Thus, the objective of this study was the development of a microemulsion containing chlorhexidine digluconate and essential oil of Lippia sidoides to be used for disinfection of dental root canals and to evaluate its profile of substantivity and antimicrobial activity. The microemulsions were obtained through phase diagrams, using the spontaneous formation method. We completed a physical-chemical characterization and evaluate the stability of the microemulsions, in addition to the substantivity profile in a bovine root dentin model, and in vitro antibacterial effect on Enterococcus faecalis. A method for quantifying chlorhexidine was developed using UV-Vis spectroscopy. The microemulsions showed acid pH, conductivity above 1.3 μScm^-1, and dispersion index similar to water. The microemulsions showed antimicrobial inhibition halos similar to the commercial gel conventionally used, but with four times more substantivity to dentinal tissues. Microemulsions were obtained as a therapeutic alternative to formulations available on the market, presenting themselves as a system with great potential for the administration of drugs for disinfection of root canals.

Soy Protein-Based Hydrogel under Microwave-Induced Grafting of Acrylic Acid and 4-(4-Hydroxyphenyl)butanoic Acid: A Potential Vehicle for Controlled Drug Delivery in Oral Cavity Bacterial Infections

The objective of this work was to evaluate grafted soy protein isolate (SPI) for pharmaceutical applications. The present work reports the microwave-assisted preparation of soy protein isolate\grafted[acrylic acid-co-4-(4-hydroxyphenyl)butanoic acid] [SPI-g-(AA-co-HPBA)] hydrogel via graft copolymerization using N,N-methylene-bis-acrylamide and potassium persulphate as the cross-linker and initiator, respectively. The chemical and physical properties of the synthesized polymeric hydrogels were analyzed by Fourier transform infrared spectroscopy, liquid chromatography-mass spectrometry (LCMS), nuclear magnetic resonance 1H-NMR, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The SEM, TEM, and XRD analyses have confirmed the formation of hydrogel SPI-g-(AA-co-HPBA) with the network structure having a layered and crystalline surface. The SPI-g-(AA-co-HPBA) hydrogel was investigated for the sustained and controlled drug delivery system for the release of model drug ciprofloxacin at basic pH for its utilization against bacterial infection in oral cavity. The drug release profile for SPI-g-(AA-co-HPBA) hydrogels was studied using LCMS at the ppb level at pH = 7.4. The synthesized hydrogel was found to be noncytotoxic, polycrystalline in nature with a network structure having good porosity, increased thermal stability, and pH-responsive behavior. The hydrogel has potential to be used as the vehicle for controlled drug delivery in oral cavity bacterial infections.

Formulating SLN and NLC as Innovative Drug Delivery Systems for Non-Invasive Routes of Drug Administration

Colloidal carriers diverge depending on their composition, ability to incorporate drugs and applicability, but the common feature is the small average particle size. Among the carriers with the potential nanostructured drug delivery application there are SLN and NLC. These nanostructured systems consist of complex lipids and highly purified mixtures of glycerides having varying particle size. Also, these systems have shown physical stability, protection capacity of unstable drugs, release control ability, excellent tolerability, possibility of vectorization, and no reported production problems related to large-scale. Several production procedures can be applied to achieve high association efficiency between the bioactive and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes Lipid-based nanocarriers (LNCs) versatile delivery system for various routes of administration. The route of administration has a significant impact on the therapeutic outcome of a drug. Thus, the non-invasive routes, which were of minor importance as parts of drug delivery in the past, have assumed added importance drugs, proteins, peptides and biopharmaceuticals drug delivery and these include nasal, buccal, vaginal and transdermal routes. The objective of this paper is to present the state of the art concerning the application of the lipid nanocarriers designated for non-invasive routes of administration. In this manner, this review presents an innovative technological platform to develop nanostructured delivery systems with great versatility of application in non-invasive routes of administration and targeting drug release.

Design and Evaluation of pH-Dependent Nanosystems Based on Cellulose Acetate Phthalate, Nanoparticles Loaded with Chlorhexidine for Periodontal Treatment

This work aimed to develop and evaluate pH-dependent systems based on nanospheres (NSphs) and nanocapsules (NCs) loaded with chlorhexidine (CHX) base as a novel formulation for the treatment of periodontal disease. Cellulose acetate phthalate (CAP) was employed as a pH-dependent polymeric material. The NSphs and NCs were prepared using the emulsion-diffusion technique and then characterized according to encapsulation efficiency (EE), size, zeta-potential, morphology, thermal properties, release profiles and a preliminary clinical panel test. The formulations showed 77% and 61% EE and 57% and 84% process efficiency (PE), respectively. Both systems were spherical with an average size of 250–300 nm. Differential scanning calorimetry (DSC) studies showed that the drug has the potential to be dispersed molecularly in the NSph matrix or dissolved in the oily center of the NCs. The CHX release test revealed that the release of NSphs-CHX follows Fickian diffusion involving diffusion-erosion processes. The NCs showed a slower release than the NSphs, following non-Fickian diffusion, which is indicative of anomalous transport. These nanosystems may, therefore, be employed as novel formulations for treating periodontal disease, due to (1) their coverage of a large surface area, (2) the controlled release of active substances at different pH, and (3) potential gingival tissue infiltration.

Advances in Nanoparticulate Drug Delivery Approaches for Sublingual and Buccal Administration

The sublingual and buccal routes of administration have significant advantages for both local and systemic drug delivery. They have shown to be an effective alternative to the traditional oral route, especially when fast onset of action is required. Drugs can be rapidly and directly absorbed into the systemic circulation via venous drainage to the superior vena cava. Therefore, they are useful for drugs that undergo high hepatic clearance or degradation in the gastrointestinal tract, and for patients that have swallowing difficulties. Drugs administered via the sublingual and buccal routes are traditionally formulated as solid dosage forms (e.g., tablets, wafers, films, and patches), liquid dosage forms (e.g., sprays and drops), and semi-solid dosage forms (e.g., gels). Conventional dosage forms are commonly affected by physiological factors, which can reduce the contact of the formulation with the mucosa and lead to unpredictable drug absorption. There have been a number of advances in formulation development to improve the retention and absorption of drugs in the buccal and sublingual regions. This review will focus on the physiological aspects that influence buccal and sublingual drug delivery and the advances in nanoparticulate drug delivery approaches for sublingual and buccal administration. The clinical development pipeline with formulations approved and in clinical trials will also be addressed.

Drug delivery systems for programmed and on-demand release

With the advancement in medical science and understanding the importance of biodistribution and pharmacokinetics of therapeutic agents, modern drug delivery research strives to utilize novel materials and fabrication technologies for the preparation of robust drug delivery systems to combat acute and chronic diseases. Compared to traditional drug carriers, which could only control the release of the agents in a monotonic manner, the new drug carriers are able to provide a precise control over the release time and the quantity of drug introduced into the patient's body. To achieve this goal, scientists have introduced "programmed" and "on-demand" approaches. The former provides delivery systems with a sophisticated architecture to precisely tune the release rate for a definite time period, while the latter includes systems directly controlled by an operator/practitioner, perhaps with a remote device triggering/affecting the implanted or injected drug carrier. Ideally, such devices can determine flexible release pattern and intensify the efficacy of a therapy via controlling time, duration, dosage, and location of drug release in a predictable, repeatable, and reliable manner. This review sheds light on the past and current techniques available for fabricating and remotely controlling drug delivery systems and addresses the application of new technologies (e.g. 3D printing) in this field.

In situ delivery of corticosteroids for treatment of oral diseases

In many mucocutaneous disorders, corticosteroids therapy is currently central. Systemic therapy is restricted to severe disorders whereas topical applications are considered as the first-line treatment. The oral cavity environment, the medication form and other factors related to the delivery method are key factors for the therapy efficiency and effectiveness. Current marketed medications are not able to avoid wrong drug exposure and scarce patients' compliance. Innovative in situ delivery systems are able to prolong the drug retention time on the mucosa and to avoid the drawbacks of conventional formulations. This review is intended to give a general overview of oral mucocutaneous pathologies and highlight the potential of new technologies in designing innovative delivery systems able to release corticosteroids in situ for the treatment of various oral cavity disorders.

Challenges in the local delivery of peptides and proteins for oral mucositis management

Oral mucositis, a common inflammatory side effect of oncological treatments, is a disorder of the oral mucosa that can cause painful ulcerations, local motor disabilities, and an increased risk of infections. Due to the discomfort it produces and the associated health risks, it can lead to cancer treatment restrains, such as the need for dose reduction, cycle delays or abandonment. Current mucositis management has low efficiency in prevention and treatment. A topical drug application for a local action can be a more effective approach than systemic routes when addressing oral cavity pathologies. Local delivery of growth factors, antibodies, and anti-inflammatory cytokines have shown promising results. However, due to the peptide and protein nature of these novel agents, and the several anatomic, physiological and environmental challenges of the oral cavity, their local action might be limited when using traditional delivering systems. This review is an awareness of the issues and strategies in the local delivery of macromolecules for the management of oral mucositis.

Buccal drug delivery technologies for patient-centred treatment of radiation-induced xerostomia (dry mouth)

Radiotherapy is a life-saving treatment for head and neck cancers, but almost 100% of patients develop dry mouth (xerostomia) because of radiation-induced damage to their salivary glands. Patients with xerostomia suffer symptoms that severely affect their health as well as physical, social and emotional aspects of their life. The current management of xerostomia is the application of saliva substitutes or systemic delivery of saliva-stimulating cholinergic agents, including pilocarpine, cevimeline or bethanechol tablets. It is almost impossible for substitutes to replicate all the functional and sensory facets of natural saliva. Salivary stimulants are a better treatment option than saliva substitutes as the former induce the secretion of natural saliva from undamaged glands; typically, these are the minor salivary glands. However, patients taking cholinergic agents systemically experience pharmacology-related side effects including sweating, excessive lacrimation and gastrointestinal tract distresses. Local delivery direct to the buccal mucosa has the potential to provide rapid onset of drug action, i.e. activation of minor salivary glands within the buccal mucosa, while sparing systemic drug exposure and off-target effects. This critical review of the technologies for the local delivery of saliva-stimulating agents includes oral disintegrating tablets (ODTs), oral disintegrating films, medicated chewing gums and implantable drug delivery devices. Our analysis makes a strong case for the development of ODTs for the buccal delivery of cholinergic agents: these must be patient-friendly delivery platforms with variable loading capacities that release the drug rapidly in fluid volumes typical of residual saliva in xerostomia (0.05-0.1 mL).

Polymeric drug delivery systems for intraoral site-specific chemoprevention of oral cancer

Oral cancer is among the most prevalent cancers in the world. Moreover, it is one of the major health problems and causes of death in many regions of the world. The traditional treatment modalities include surgical removal, radiation therapy, systemic chemotherapy, or a combination of these methods. In recent decades, there has been significant interest in intraoral site-specific chemoprevention via local drug delivery using polymeric systems. Because of its easy accessibility and clear visibility, the oral mucosa is amenable for local drug delivery. A variety of polymeric systems-such as gels, tablets, films, patches, injectable systems (e.g., millicylindrical implants, microparticles, and in situ-forming depots), and nanosized carriers (e.g., polymeric nanoparticles, nanofibers, polymer-drug conjugates, polymeric micelles, nanoliposomes, nanoemulsions, and polymersomes)-have been developed and evaluated for the local delivery of natural and synthetic chemopreventive agents. The findings of in vitro, ex vivo, and in vivo studies and the positive outcome of clinical trials demonstrate that intraoral site-specific drug delivery is an attractive, highly effective and patient-friendly strategy for the management of oral cancer. Intraoral site-specific drug delivery provides unique therapeutic advantages when compared to systemic chemotherapy. Moreover, intraoral drug delivery systems are self-administrable and can be removed when needed, increasing patient compliance. This article covers important aspects and advances related to the design, development, and efficacy of polymeric systems for intraoral site-specific drug delivery. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1383-1413, 2018.

Local delivery system of doxycycline hyclate based on ε-caprolactone copolymers for periodontitis treatment

The aim of the study was to evaluate kinetics of doxycycline hyclate release from polymeric bioresorbable implants and to examine suitability of this system for local treatment of periodontitis. Selected trimethylene carbonate/ϵ-caprolactone (TMC/CL) and glycolide/caprolactone (GL/CL) copolymers were synthesized and used as carriers in the form of small elastic rings with 5 wt% and 10 wt% doxycycline hyclate content, or in the form of flakes obtained through electro-spinning technique. The release of the drug under in vitro conditions has been tested. The study has shown that equimolar TMC/CL copolymer loaded with 10 wt% of doxycycline hyclate appears to be the most suitable copolymer for assumed system. The drug release proceeds mainly by diffusion of medium into the polymeric matrix and then the drug is washed out. Daily validation of doxycycline doses released by the system should ensure accurate course of the therapy.

Mucoadhesive films containing chitosan-coated nanoparticles: a new strategy for buccal curcumin release

Mucoadhesive films containing curcumin-loaded nanoparticles were developed, aiming to prolong the residence time of the dosage form in the oral cavity and to increase drug absorption through the buccal mucosa. Films were prepared by the casting method after incorporation of curcumin-loaded chitosan-coated polycaprolactone nanoparticles into plasticized chitosan solutions. Different molar masses of mucoadhesive polysaccharide chitosan and concentrations of plasticizer glycerol were used to optimize the preparation conditions. Films obtained using medium and high molar mass chitosan were found to be homogeneous and flexible. Curcumin-loaded nanoparticles were uniformly distributed on the film surface, as evidenced by atomic force microscopy and high-resolution field-emission gun scanning electron microscopy (FEG-SEM) images. Analyses of film cross sections using FEG-SEM demonstrate the presence of nanoparticles inside the films. In addition, films proved to have a good rate of hydration in simulated saliva solution, displaying a maximum swelling of around 80% and in vitro prolonged-controlled delivery of curcumin. These results indicate that the mucoadhesive films containing nanoparticles offer a promising approach for buccal delivery of curcumin, which may be particularly useful in the treatment of periodontal diseases that require a sustained drug delivery.

Effect of novel mucoadhesive buccal patches of carvedilol on isoprenaline-induced tachycardia

The main aim of the study was designed to develop bioadhesive buccal patches of carvedilol (CR) and evaluate for isoprenaline-induced tachycardia. Buccal patches of carvedilol were prepared by using chitosan (CH), sodium salt of carboxy methyl cellulose (NaCMC), and polyvinyl alcohol (PVA) as mucoadhesive polymers. The solvent evaporation method was used for the preparation of buccal patches. The patches were evaluated for their physical characteristics like patch thickness, weight variation, content uniformity, folding endurance, surface pH, residence time, in vitro drug release, and in vivo pharmacodynamic study. The swelling index of the patches was found to be proportional to the polymer concentration, whereas surface pH of all the formulated bioadhesive patches was found to lie between neutral ranges. In-vitro release study shows that 94.75% drug was release in 8 hours from the patch, which containing 2% w/v chitosan. The folding endurance result shows good elasticity in all the patches. Application of buccal patches on buccal mucosa of rabbit shows a significant result in % inhibition of isoprenaline-induced tachycardia. Prepared buccal patches of chitosan, NaCMC, and PVA containing Carvedilol meet the ideal requirement for the delivery of cardiovascular drugs and inhibit the isoprenaline tachycardia.

Chitosan lactate wafer as a platform for the buccal delivery of tizanidine HCl: in vitro and in vivo performance

Tizanidine HCl is a skeletal muscle relaxant that suffers from extensive hepatic metabolism resulting in 34-40% oral bioavailability. It also suffers from short half-life (2.1-4.2h) that necessitates frequent administration thus reducing patient compliance. In addition, tizanidine HCl is water soluble, so it is a challenging candidate for controlled drug delivery. In our study, tizanidine was encapsulated in chitosan lactate beads cross-linked with sodium tripolyphosphate. The beads were further incorporated into chitosan lactate wafer to be easily applied to buccal mucosa, aiming to bypass the hepatic metabolism. A central composite face-centered design was applied to statistically optimize the formulation variables; tripolyphosphate concentration, chitosan lactate concentration and polymer/drug ratio. The optimized formula suggested by the software composed of; 3.03% tripolyphosphate, 4.92% chitosan lactate and 2.13 polymer/drug ratio. It provided encapsulation efficiency of 56.5% and controlled tizanidine release over 8h. It is also characterized by being mucoadhesive and nonirritant. Pharmacokinetic parameters of tizanidine from the optimized formula were compared to those of the immediate release tablet, Sirdalud(®), as reference in human volunteers using a randomized crossover design. Significant increase was observed for Tmax and AUC(0-∞). The increase in relative bioavailability of TIZ from the optimized formula was 2.27 fold.

Osmotic micropumps for drug delivery

This paper reviews miniaturized drug delivery systems applying osmotic principles for pumping. Osmotic micropumps require no electrical energy and consequently enable drug delivery systems of smallest size for a broad field of new applications. In contrast to common tablets, these pumps provide constant (zero-order) drug release rates. This facilitates systems for long term use not limited by gastrointestinal transit time and first-pass metabolism. The review focuses on parenteral routes of administration targeting drug delivery either in a site-specific or systemic way. Osmotic pumps consist of three building blocks: osmotic agent, solvent, and drug. This is used to categorize pumps into (i) single compartment systems using water from body fluids as solvent and the drug itself as the osmotic agent, (ii) two compartment systems employing a separate osmotic agent, and (iii) multi-compartment architectures employing solvent, drug and osmotic agent separately. In parallel to the micropumps, relevant applications and therapies are discussed.

Recent developments in buccal and sublingual delivery systems

INTRODUCTION

There have been several advances in the delivery of drugs through the buccal mucosa over the last 5 years, which have resulted in a number of new buccal delivery products appearing on the market.

AREAS COVERED

This review discusses the most recent developments in the area of buccal and sublingual drug delivery, with a focus on marketed drugs. Likely future directions are also considered and reported.

EXPERT OPINION

The future potential of buccal and sublingual delivery systems looks favorable. It is envisaged that in the future, buccal and sublingual delivery technologies will provide a platform for the successful delivery of vaccines and antigens. It is also foreseen that physical means of enhancing drug uptake (e.g., sonophoresis, iontophoresis and electroporation) will be commercialized for buccal delivery, thereby expanding the current drug candidate list for this area. The formulation of delivery systems for photosensitizers in photodynamic therapy is a potential emerging area, while buccal and sublingual delivery, in general, is attractive for the development of intellectual property.

Recent trends in oral transmucosal drug delivery systems: an emphasis on the soft palatal route

INTRODUCTION

The oral mucosa is an appropriate route for drug delivery systems, as it evades first-pass metabolism, enhances drug bioavailability and provides the means for rapid drug transport to the systematic circulation. This delivery system offers a more comfortable and convenient delivery route compared with the intravenous route. Although numerous drugs have been evaluated for oral mucosal delivery, few of them are available commercially. This is due to limitations such as the high costs associated with developing such drug delivery systems.

AREAS COVERED

The present review covers recent developments and applications of oral transmucosal drug delivery systems. More specifically, the review focuses on the suitability of the oral soft palatal site as a new route for drug delivery systems.

EXPERT OPINION

The novelistic oral soft palatal platform is a promising mucoadhesive site for delivering active pharmaceuticals, both systemically and locally, and it can also serve as a smart route for the targeting of drugs to the brain.

Drug delivery strategies for Alzheimer's disease treatment

INTRODUCTION

Current Alzheimer's disease (AD) therapy is based on the administration of the drugs donepezil, galantamine, rivastigmine and memantine. Until disease-modifying therapies become available, further research is needed to develop new drug delivery strategies to ensure ease of administration and treatment persistence.

AREAS COVERED

In addition to the conventional oral formulations, a variety of drug delivery strategies applied to the treatment of AD are reviewed in this paper, with a focus on strategies leading to simplified dosage regimens and to providing new pharmacological tools. Alternatives include extended release, orally disintegrating or sublingual formulations, intranasal or short- and long-acting intramuscular or transdermal forms, and nanotechnology-based delivery systems.

EXPERT OPINION

The advent of new research on molecular mechanisms of AD pathogenesis has outlined new strategies for therapeutic intervention; these include the stimulation of α-secretase cleavage, the inhibition of γ-secretase activity, the use of non-steroidal anti-inflammatory drugs, neuroprotection based on antioxidant therapy, the use of estrogens, NO synthetase inhibitors, and natural agents such as polyphenols. Unfortunately, these compounds might not help patients with end stage AD, but might hopefully slow or stop the disease process in its early stage. Nanotechnologies may prove to be a promising contribution in future AD drug delivery strategies, in particular drug carrier nano- or microsystems, which can limit the side effects of anti-Alzheimer drugs.

Preparation of mucoadhesive oral patches containing tetracycline hydrochloride and carvacrol for treatment of local mouth bacterial infections and candidiasis

The specific aim of this work was to prepare mucoadhesive patches containing tetracycline hydrochloride and carvacrol in an attempt to develop a novel oral drug delivery system for the treatment of mouth infections. The bilayered patches were prepared using ethyl cellulose as a backing layer and carbopol 934 as a matrix mucoadhesive layer. Patches were prepared with different loading amounts of tetracycline hydrochloride and carvacrol. The antimicrobial activity was assessed for the prepared patches using the disc-diffusion method against the yeast Candida albicans and five bacterial strains, including Pseudomonas aeruginosa, Escherichia coli, Bacillus cereus, Staphylococcus aureus, and Bacillus bronchispti. In this work, we highlighted the possibility of occurrence of a synergistic action between carvacrol and tetracycline. The best formulation was selected based on microbiological tests, drug release, ex-vivo mucoadhesive performance, and swelling index. Physical characteristics of the selected formulations were determined. These included pH, patch thickness, weight uniformity, content uniformity, folding endurance, and patch stability.

Design and formulation of mebeverine HCl semisolid formulations for intraorally administration

Gel formulations of mebeverine hydrochloride (MbHCl) containing hydroxypropylmethylcellulose (HPMC), metolose (MTL), and poloxamer 407 (PLX) were prepared to be used in the treatment of different oral painful conditions. HPMC was used as a mucoadhesive gel base while MTL and PLX were used to prepare sol-gel thermosensitive gels. MTL and PLX formulations showed proper sol-gel transition temperature for intraoral application. Formulations were evaluated in terms of their viscosity, mechanical properties, mucoadhesivity, stability, and in vitro drug release. The formulation prepared with 2% of HPMC K100M provided the highest viscosity at room temperature. However, the viscosity of HPMC-PLX mixture showed a significant increase at body temperature. The greatest mucoadhesion was also noted in HPMC-PLX combinations. Texture profile analysis exhibited the differences of the adhesion, hardness, elasticity, cohesiveness, and compressibility of the formulations. The release profiles of MbHCl were obtained, and non-Fickian release was observed from all the formulations. The formulations were stored at different temperature and relative humidity. No significant changes were observed at the end of the 3 months. HPMC-PLX formulation of MbHCl was chosen for in vivo studies, and it remained longer than dye solution on the rabbit's intraoral mucosal tissue. It was found worthy of further clinical evaluation.

Novel analytical methods for the characterization of oral wafers

This study aims at compensating the lack of adequate methods for the characterization of the novel dosage forms buccal wafers by applying recent advanced analytical techniques. Fast-dissolving oral wafers need special methods for assessing their properties in drug development and quality control. For morphologic investigations, scanning electron microscopy (SEM) and near-infrared chemical imaging (NIR-CI) were used. Differences in the distribution of the active pharmaceutical ingredient within wafers can be depicted by NIR-CI. Film thickness was determined by micrometer screw and coating thickness gauge revealing no significant differences between the obtained values. To distinguish between the mechanical properties of different polymers, tensile test was performed. Suitable methods to predict disintegration behaviour are thermomechanical analysis and contact angle measurement. The determination of drug release was carried out by three different methods. Fibre-optic sensor systems allow an online measurement of the drug release profiles and the thorough analysis even within the first seconds of disintegration and drug dissolution.