Biophysical microenvironment and 3D culture physiological relevance

Impact of the Physical Cellular Microenvironment on the Structure and Function of a Model Hepatocyte Cell Line for Drug Toxicity Applications

It is widely recognised that cells respond to their microenvironment, which has implications for cell culture practices. Growth cues provided by 2D cell culture substrates are far removed from native 3D tissue structure in vivo. Geometry is one of many factors that differs between in vitro culture and in vivo cellular environments. Cultured cells are far removed from their native counterparts and lose some of their predictive capability and reliability. In this study, we examine the cellular processes that occur when a cell is cultured on 2D or 3D surfaces for a short period of 8 days prior to its use in functional assays, which we term: "priming". We follow the process of mechanotransduction from cytoskeletal alterations, to changes to nuclear structure, leading to alterations in gene expression, protein expression and improved functional capabilities. In this study, we utilise HepG2 cells as a hepatocyte model cell line, due to their robustness for drug toxicity screening. Here, we demonstrate enhanced functionality and improved drug toxicity profiles that better reflect the in vivo clinical response. However, findings more broadly reflect in vitro cell culture practises across many areas of cell biology, demonstrating the fundamental impact of mechanotransduction in bioengineering and cell biology.

Growth of MIN-6 Cells on Salmon Fibrinogen Scaffold Improves Insulin Secretion

The incidence of type I diabetes has been increasing worldwide at an annual rate of approximately 3%. One of the strategies to treat type I diabetes is islet transplantation, in which damaged β-cells are replaced with new islets. To improve β-cells’ expansion and pseudoislet formation, studies are focusing on using extracellular-matrix-resembling substrates. We evaluated the potential of salmon fibrinogen and chitosan electrospun scaffold as cell substrate for cultivating MIN-6 cells. The morphology of cells, insulin secretion and gene expression was evaluated and compared with other substrates (nanofibrous scaffold, microporous scaffold and tissue culture polystyrene). We found that all tested 3D conditions favored the pseudoislet formation of MIN-6 cells. The insulin secretion of MIN-6 cells after stimulation with high-glucose media shows approximately a 9-fold increase compared to the control group when a fibrinogen/chitosan-based electrospun scaffold was used for cultivation. The differences in insulin secretion were corroborated by differences in gene expression. The differences in insulin secretion could probably be attributed to the differences in the mechanical and/or chemical nature of the tested substrates.

Synthesis, Characterization and Evaluation of Peptide Nanostructures for Biomedical Applications

There is a challenging need for the development of new alternative nanostructures that can allow the coupling and/or encapsulation of therapeutic/diagnostic molecules while reducing their toxicity and improving their circulation and in-vivo targeting. Among the new materials using natural building blocks, peptides have attracted significant interest because of their simple structure, relative chemical and physical stability, diversity of sequences and forms, their easy functionalization with (bio)molecules and the possibility of synthesizing them in large quantities. A number of them have the ability to self-assemble into nanotubes, -spheres, -vesicles or -rods under mild conditions, which opens up new applications in biology and nanomedicine due to their intrinsic biocompatibility and biodegradability as well as their surface chemical reactivity via amino- and carboxyl groups. In order to obtain nanostructures suitable for biomedical applications, the structure, size, shape and surface chemistry of these nanoplatforms must be optimized. These properties depend directly on the nature and sequence of the amino acids that constitute them. It is therefore essential to control the order in which the amino acids are introduced during the synthesis of short peptide chains and to evaluate their in-vitro and in-vivo physico-chemical properties before testing them for biomedical applications. This review therefore focuses on the synthesis, functionalization and characterization of peptide sequences that can self-assemble to form nanostructures. The synthesis in batch or with new continuous flow and microflow techniques will be described and compared in terms of amino acids sequence, purification processes, functionalization or encapsulation of targeting ligands, imaging probes as well as therapeutic molecules. Their chemical and biological characterization will be presented to evaluate their purity, toxicity, biocompatibility and biodistribution, and some therapeutic properties in vitro and in vivo. Finally, their main applications in the biomedical field will be presented so as to highlight their importance and advantages over classical nanostructures.

Microengineered systems with iPSC-derived cardiac and hepatic cells to evaluate drug adverse effects

Hepatic and cardiac drug adverse effects are among the leading causes of attrition in drug development programs, in part due to predictive failures of current animal or in vitro models. Hepatocytes and cardiomyocytes differentiated from human induced pluripotent stem cells (iPSCs) hold promise for predicting clinical drug effects, given their human-specific properties and their ability to harbor genetically determined characteristics that underlie inter-individual variations in drug response. Currently, the fetal-like properties and heterogeneity of hepatocytes and cardiomyocytes differentiated from iPSCs make them physiologically different from their counterparts isolated from primary tissues and limit their use for predicting clinical drug effects. To address this hurdle, there have been ongoing advances in differentiation and maturation protocols to improve the quality and use of iPSC-differentiated lineages. Among these are in vitro hepatic and cardiac cellular microsystems that can further enhance the physiology of cultured cells, can be used to better predict drug adverse effects, and investigate drug metabolism, pharmacokinetics, and pharmacodynamics to facilitate successful drug development. In this article, we discuss how cellular microsystems can establish microenvironments for these applications and propose how they could be used for potentially controlling the differentiation of hepatocytes or cardiomyocytes. The physiological relevance of cells is enhanced in cellular microsystems by simulating properties of tissue microenvironments, such as structural dimensionality, media flow, microfluidic control of media composition, and co-cultures with interacting cell types. Recent studies demonstrated that these properties also affect iPSC differentiations and we further elaborate on how they could control differentiation efficiency in microengineered devices. In summary, we describe recent advances in the field of cellular microsystems that can control the differentiation and maturation of hepatocytes and cardiomyocytes for drug evaluation. We also propose how future research with iPSCs within engineered microenvironments could enable their differentiation for scalable evaluations of drug effects.

Electrical Impedance Spectroscopy for Monitoring Chemoresistance of Cancer Cells

Electrical impedance spectroscopy (EIS) is an electrokinetic method that allows for the characterization of intrinsic dielectric properties of cells. EIS has emerged in the last decade as a promising method for the characterization of cancerous cells, providing information on inductance, capacitance, and impedance of cells. The individual cell behavior can be quantified using its characteristic phase angle, amplitude, and frequency measurements obtained by fitting the input frequency-dependent cellular response to a resistor-capacitor circuit model. These electrical properties will provide important information about unique biomarkers related to the behavior of these cancerous cells, especially monitoring their chemoresistivity and sensitivity to chemotherapeutics. There are currently few methods to assess drug resistant cancer cells, and therefore it is difficult to identify and eliminate drug-resistant cancer cells found in static and metastatic tumors. Establishing techniques for the real-time monitoring of changes in cancer cell phenotypes is, therefore, important for understanding cancer cell dynamics and their plastic properties. EIS can be used to monitor these changes. In this review, we will cover the theory behind EIS, other impedance techniques, and how EIS can be used to monitor cell behavior and phenotype changes within cancerous cells.

Calcium Oscillation Frequency Is a Potential Functional Complex Physiological Relevance Indicator for a Neuroblastoma-Based 3D Culture Model

In vitro screening for drugs that affect neural function in vivo is still primitive. It primarily relies on single cellular responses from 2D monolayer cultures that have been shown to be exaggerations of the in vivo response. For the 3D model to be physiologically relevant, it should express characteristics that not only differentiate it from 2D but also closely emulate those seen in vivo. These complex physiologically relevant (CPR) outcomes can serve as a standard for determining how close a 3D culture is to its native tissue or which out of a given number of 3D platforms is better suited for a given application. In this study, Fluo-4-based calcium fluorescence imaging was performed followed by automated image data processing to quantify the calcium oscillation frequency of SHSY5Y cells cultured in 2D and 3D formats. It was found that the calcium oscillation frequency is upregulated in traditional 2D cultures while it was comparable to in vivo in spheroid and microporous polymer scaffold-based 3D models, suggesting calcium oscillation frequency as a potential functional CPR indicator for neural cultures.

Secretome-Based Prediction of Three-Dimensional Hepatic Microtissue Physiological Relevance

Early biomarkers for indication of the complex physiological relevance (CPR) of a three-dimensional (3D) tissue model are needed. CPR is detected late in culture and requires different analytical techniques. Albumin production, CYP3A4 expression, and formation of bile canaliculi structures are commonly used to compare in vitro hepatic cells to their in vivo counterpart. A universal biomarker independent of the cell type would bring this to a common detection platform. We make the case that these hepatic characteristics are not sufficient to differentiate traditional (2D) cell culture from the more complex 3D culture. We explored the cytokine secretion profile (secretome) for its potential as a 3D early culture biomarker. PDGF-AB/BB and vascular endothelial growth factor (VEGF) were found to be upregulated in 3D compared to 2D cultures at early time points (days 3 and 4). These observations provide a foundation upon which in vivo validation of cytokines can lead to physiologically relevant 3D in vitro cell culture.

Mechanically Biomimetic Gelatin-Gellan Gum Hydrogels for 3D Culture of Beating Human Cardiomyocytes

To promote the transition of cell cultures from 2D to 3D, hydrogels are needed to biomimic the extracellular matrix (ECM). One potential material for this purpose is gellan gum (GG), a biocompatible and mechanically tunable hydrogel. However, GG alone does not provide attachment sites for cells to thrive in 3D. One option for biofunctionalization is the introduction of gelatin, a derivative of the abundant ECM protein collagen. Unfortunately, gelatin lacks cross-linking moieties, making the production of self-standing hydrogels difficult under physiological conditions. Here, we explore the functionalization of GG with gelatin at biologically relevant concentrations using semiorthogonal, cytocompatible, and facile chemistry based on hydrazone reaction. These hydrogels exhibit mechanical behavior, especially elasticity, which resembles the cardiac tissue. The use of optical projection tomography for 3D cell microscopy demonstrates good cytocompatibility and elongation of human fibroblasts (WI-38). In addition, human-induced pluripotent stem cell-derived cardiomyocytes attach to the hydrogels and recover their spontaneous beating in 24 h culture. Beating is studied using in-house-built phase contrast video analysis software, and it is comparable with the beating of control cardiomyocytes under regular culture conditions. These hydrogels provide a promising platform to transition cardiac tissue engineering and disease modeling from 2D to 3D.

Systematic Analysis of mRNA and miRNA Expression of 3D-Cultured Neural Stem Cells (NSCs) in Spaceflight

Recently, with the development of the space program there are growing concerns about the influence of spaceflight on tissue engineering. The purpose of this study was thus to determine the variations of neural stem cells (NSCs) during spaceflight. RNA-Sequencing (RNA-Seq) based transcriptomic profiling of NSCs identified many differentially expressed mRNAs and miRNAs between space and earth groups. Subsequently, those genes with differential expression were subjected to bioinformatic evaluation using gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes pathway (KEGG) and miRNA-mRNA network analyses. The results showed that NSCs maintain greater stemness ability during spaceflight although the growth rate of NSCs was slowed down. Furthermore, the results indicated that NSCs tended to differentiate into neuron in outer space conditions. Detailed genomic analyses of NSCs during spaceflight will help us to elucidate the molecular mechanisms behind their differentiation and proliferation when they are in outer space.

Three-dimensional multiscale fiber matrices: development and characterization for increased HepG2 functional maintenance for bio-artificial liver application

One-step development of three-dimensional multiscale fiber matrices to enhance attachment, proliferation, and characteristic functions of HepG2 cells.

3D bioprinting for drug discovery and development in pharmaceutics

Successful launch of a commercial drug requires significant investment of time and financial resources wherein late-stage failures become a reason for catastrophic failures in drug discovery. This calls for infusing constant innovations in technologies, which can give reliable prediction of efficacy, and more importantly, toxicology of the compound early in the drug discovery process before clinical trials. Though computational advances have resulted in more rationale in silico designing, in vitro experimental studies still require gaining industry confidence and improving in vitro-in vivo correlations. In this quest, due to their ability to mimic the spatial and chemical attributes of native tissues, three-dimensional (3D) tissue models have now proven to provide better results for drug screening compared to traditional two-dimensional (2D) models. However, in vitro fabrication of living tissues has remained a bottleneck in realizing the full potential of 3D models. Recent advances in bioprinting provide a valuable tool to fabricate biomimetic constructs, which can be applied in different stages of drug discovery research. This paper presents the first comprehensive review of bioprinting techniques applied for fabrication of 3D tissue models for pharmaceutical studies. A comparative evaluation of different bioprinting modalities is performed to assess the performance and ability of fabricating 3D tissue models for pharmaceutical use as the critical selection of bioprinting modalities indeed plays a crucial role in efficacy and toxicology testing of drugs and accelerates the drug development cycle. In addition, limitations with current tissue models are discussed thoroughly and future prospects of the role of bioprinting in pharmaceutics are provided to the reader.

STATEMENT OF SIGNIFICANCE

Present advances in tissue biofabrication have crucial role to play in aiding the pharmaceutical development process achieve its objectives. Advent of three-dimensional (3D) models, in particular, is viewed with immense interest by the community due to their ability to mimic in vivo hierarchical tissue architecture and heterogeneous composition. Successful realization of 3D models will not only provide greater in vitro-in vivo correlation compared to the two-dimensional (2D) models, but also eventually replace pre-clinical animal testing, which has their own shortcomings. Amongst all fabrication techniques, bioprinting- comprising all the different modalities (extrusion-, droplet- and laser-based bioprinting), is emerging as the most viable fabrication technique to create the biomimetic tissue constructs. Notwithstanding the interest in bioprinting by the pharmaceutical development researchers, it can be seen that there is a limited availability of comparative literature which can guide the proper selection of bioprinting processes and associated considerations, such as the bioink selection for a particular pharmaceutical study. Thus, this work emphasizes these aspects of bioprinting and presents them in perspective of differential requirements of different pharmaceutical studies like in vitro predictive toxicology, high-throughput screening, drug delivery and tissue-specific efficacies. Moreover, since bioprinting techniques are mostly applied in regenerative medicine and tissue engineering, a comparative analysis of similarities and differences are also expounded to help researchers make informed decisions based on contemporary literature.

Primary Hepatocytes Cultured on a Fiber-Embedded PDMS Chip to Study Drug Metabolism

In vitro drug screening using reliable and predictable liver models remains a challenge. The identification of an ideal biological substrate is essential to maintain hepatocyte functions during in vitro culture. Here, we developed a fiber-embedded polydimethylsiloxane (PDMS) chip to culture hepatocytes. Hepatocyte spheroids formed in this device were subjected to different flow rates, of which a flow rate of 50 μL/min provided the optimal microenvironment for spheroid formation, maintained significantly higher rates of albumin and urea synthesis, yielded higher CYP3A1 (cytochrome P450 3A1) and CYP2C11 (cytochrome P450 2C11) enzyme activities for metabolism, and demonstrated higher expression levels of liver-specific genes. In vitro metabolism tests on tolbutamide and testosterone by hepatocytes indicated predicted clearance rates of 1.98 ± 0.43 and 40.80 ± 10.13 mL/min/kg, respectively, which showed a good in vitro⁻in vivo correspondence. These results indicate that this system provides a strategy for the construction of functional engineered liver tissue that can be used to study drug metabolism.

Restoring calcium homeostasis in diabetic cardiomyocytes: an investigation through mathematical modelling

Regulated calcium flux from sarcoplasmic reticulum could be a possible therapeutic strategy in diabetic cardiomyocyte problem.

Patterned Fibers Embedded Microfluidic Chips Based on PLA and PDMS for Ag Nanoparticle Safety Testing

A new method to integrate poly-dl-lactide (PLA) patterned electrospun fibers with a polydimethylsiloxane (PDMS) microfluidic chip was successfully developed via lithography. Hepatocyte behavior under static and dynamic conditions was investigated. Immunohistochemical analyses indicated good hepatocyte survival under the dynamic culture system with effective hepatocyte spheroid formation in the patterned microfluidic chip vs. static culture conditions and tissue culture plate (TCP). In particular, hepatocytes seeded in this microfluidic chip under a flow rate of 10 μL/min could re-establish hepatocyte polarity to support biliary excretion and were able to maintain high levels of albumin and urea secretion over 15 days. Furthermore, the optimized system could produce sensitive and consistent responses to nano-Ag-induced hepatotoxicity during culture. Thus, this microfluidic chip device provides a new means of fabricating complex liver tissue-engineered scaffolds, and may be of considerable utility in the toxicity screening of nanoparticles.

Molecular basis for cytokine biomarkers of complex 3D microtissue physiology in vitro

'Physiologically more-relevant' claims are readily made for cells cultured on any surface or in a scaffold that provides loosely defined 3D geometry. A set of tools to measure culture '3D-ness' more accurately are needed. Such tools should find applications in fields ranging from high-throughput identification of substrates for tissue engineering and regenerative medicine to cell-based screening of drug candidates. Until now, these fields have not provided a consensus for the most promising place to initiate the search. Here, we review recent advances in transcriptomic, proteomic, inflammation and oncology-related pathways, as well as functional studies that strongly point to cytokines as the most likely compounds to form the missing consensus.

Micropatterned coculture of hepatocytes on electrospun fibers as a potential in vitro model for predictive drug metabolism

The liver is the major organ of importance to determine drug dispositions in the body, thus the development of hepatocyte culture systems is of great scientific and practical interests to provide reliable and predictable models for in vitro drug screening. In the current study, to address the challenges of a rapid function loss of primary hepatocytes, the coculture of hepatocytes with fibroblasts and endothelial cells (Hep-Fib-EC) was established on micropatterned fibrous scaffolds. Liver-specific functions, such as the albumin secretion and urea synthesis, were well maintained in the coculture system, accompanied by a rapid formation of multicellular hepatocyte spheroids. The activities of phase I (CYP3A11 and CYP2C9) and phase II enzymes indicated a gradual increase for cocultured hepatocytes, and a maximum level was achieved after 5 days and maintained throughout 15 days of culture. The metabolism testing on model drugs indicated that the scaled clearance rates for hepatocytes in the Hep-Fib-EC coculture system were significantly higher than those of other culture methods, and a linear regression analysis indicated good correlations between the observed data of rats and in vitro predicted values during 15 days of culture. In addition, the enzyme activities and drug clearance rates of hepatocytes in the Hep-Fib-EC coculture model experienced sensitive responsiveness to the inducers and inhibitors of metabolizing enzymes. These results demonstrated the feasibility of micropatterned coculture of hepatocytes as a potential in vitro testing model for the prediction of in vivo drug metabolism.

Living biointerfaces based on non-pathogenic bacteria support stem cell differentiation

Lactococcus lactis, a non-pathogenic bacteria, has been genetically engineered to express the III_7–10 fragment of human fibronectin as a membrane protein. The engineered L. lactis is able to develop biofilms on different surfaces (such as glass and synthetic polymers) and serves as a long-term substrate for mammalian cell culture, specifically human mesenchymal stem cells (hMSC). This system constitutes a living interface between biomaterials and stem cells. The engineered biofilms remain stable and viable for up to 28 days while the expressed fibronectin fragment induces hMSC adhesion. We have optimised conditions to allow long-term mammalian cell culture, and found that the biofilm is functionally equivalent to a fibronectin-coated surface in terms of osteoblastic differentiation using bone morphogenetic protein 2 (BMP-2) added to the medium. This living bacteria interface holds promise as a dynamic substrate for stem cell differentiation that can be further engineered to express other biochemical cues to control hMSC differentiation.

A 3-D cell culture system to study epithelia functions using microcarriers

In vitro cell culture models used to study epithelia and epithelial diseases would benefit from the recognition that organs and tissues function in a three-dimensional (3D) environment. This context is necessary for the development of cultures that more realistically resemble in vivo tissues/organs. Our aim was to establish and characterize biologically meaningful 3D models of epithelium. We engineered 3D epithelia cultures using a kidney epithelia cell line (MDCK) and spherical polymer scaffolds. These kidney epithelia were characterized by live microscopy, immunohistochemistry and transmission electron microscopy. Strikingly, the epithelial cells displayed increased physiological relevance; they were extensively polarized and developed a more differentiated phenotype. Using such a growth system allows for direct transmission and fluorescence imaging with few restrictions using wide-field, confocal and Light Sheet Fluorescence Microscopy. We also assessed the wider relevance of this 3D culturing technique with several epithelial cell lines. Finally, we established that these 3D micro-tissues can be used for infection as well as biochemical assays and to study important cellular processes such as epithelial mesenchymal transmission. This new biomimetic model could provide a broadly applicable 3D culture system to study epithelia and epithelia related disorders.

Drug Discovery Approaches Utilizing Three-Dimensional Cell Culture

Historically, two-dimensional (2D) cell culture has been the preferred method of producing disease models in vitro. Recently, there has been a move away from 2D culture in favor of generating three-dimensional (3D) multicellular structures, which are thought to be more representative of the in vivo environment. This transition has brought with it an influx of technologies capable of producing these structures in various ways. However, it is becoming evident that many of these technologies do not perform well in automated in vitro drug discovery units. We believe that this is a result of their incompatibility with high-throughput screening (HTS). In this study, we review a number of technologies, which are currently available for producing in vitro 3D disease models. We assess their amenability with high-content screening and HTS and highlight our own work in attempting to address many of the practical problems that are hampering the successful deployment of 3D cell systems in mainstream research.

Spheroid culture of primary hepatocytes with short fibers as a predictable in vitro model for drug screening

Short fibers are utilized as scaffolds for generation of size-controlled hepatocyte spheroids, exhibiting an efficient in vitro model for determining drug metabolism.

Is time an extra dimension in 3D cell culture?

Time or the temporal microenvironment is a parameter that is often overlooked in 3D cell culture. However, given that the 3D system is a dynamic entity, there exists bidirectional signaling between the cells and their microenvironment and, in time, cells can develop the capacity to modulate their environment. We make this case here by illustrating the relation between the temporal dimension and other microenvironmental parameters and demonstrate how the exogenously incorporated microenvironmental factors (MEFs) can be rendered less significant with time. Such knowledge can guide construct design to make 3D platforms architecturally simpler by eliminating redundancy. We further show that there is a need to establish the point at which the construct is complex enough such that its use yields responses that more closely emulate in vivo outcomes.

3D Cultivation Techniques for Primary Human Hepatocytes

One of the main challenges in drug development is the prediction of in vivo toxicity based on in vitro data. The standard cultivation system for primary human hepatocytes is based on monolayer cultures, even if it is known that these conditions result in a loss of hepatocyte morphology and of liver-specific functions, such as drug-metabolizing enzymes and transporters. As it has been demonstrated that hepatocytes embedded between two sheets of collagen maintain their function, various hydrogels and scaffolds for the 3D cultivation of hepatocytes have been developed. To further improve or maintain hepatic functions, 3D cultivation has been combined with perfusion. In this manuscript, we discuss the benefits and drawbacks of different 3D microfluidic devices. For most systems that are currently available, the main issues are the requirement of large cell numbers, the low throughput, and expensive equipment, which render these devices unattractive for research and the drug-developing industry. A higher acceptance of these devices could be achieved by their simplification and their compatibility with high-throughput, as both aspects are of major importance for a user-friendly device.

Hydrogel-based methods for engineering cellular microenvironment with spatiotemporal gradients

Natural cellular microenvironment consists of spatiotemporal gradients of multiple physical (e.g. extracellular matrix stiffness, porosity and stress/strain) and chemical cues (e.g. morphogens), which play important roles in regulating cell behaviors including spreading, proliferation, migration, differentiation and apoptosis, especially for pathological processes such as tumor formation and progression. Therefore, it is essential to engineer cellular gradient microenvironment incorporating various gradients for the fabrication of normal and pathological tissue models in vitro. In this article, we firstly review the development of engineering cellular physical and chemical gradients with cytocompatible hydrogels in both two-dimension and three-dimension formats. We then present current advances in the application of engineered gradient microenvironments for the fabrication of disease models in vitro. Finally, concluding remarks and future perspectives for engineering cellular gradients are given.

Biomaterial arrays with defined adhesion ligand densities and matrix stiffness identify distinct phenotypes for tumorigenic and nontumorigenic human mesenchymal cell types

Here, we aimed to investigate migration of a model tumor cell line (HT-1080 fibrosarcoma cells, HT-1080s) using synthetic biomaterials to systematically vary peptide ligand density and substrate stiffness. A range of substrate elastic moduli were investigated by using poly(ethylene glycol) (PEG) hydrogel arrays (0.34 - 17 kPa) and self-assembled monolayer (SAM) arrays (~0.1-1 GPa), while cell adhesion was tuned by varying the presentation of Arg-Gly-Asp (RGD)-containing peptides. HT-1080 motility was insensitive to cell adhesion ligand density on RGD-SAMs, as they migrated with similar speed and directionality for a wide range of RGD densities (0.2-5% mol fraction RGD). Similarly, HT-1080 migration speed was weakly dependent on adhesion on 0.34 kPa PEG surfaces. On 13 kPa surfaces, a sharp initial increase in cell speed was observed at low RGD concentration, with no further changes observed as RGD concentration was increased further. An increase in cell speed ~ two-fold for the 13 kPa relative to the 0.34 kPa PEG surface suggested an important role for substrate stiffness in mediating motility, which was confirmed for HT-1080s migrating on variable modulus PEG hydrogels with constant RGD concentration. Notably, despite ~ two-fold changes in cell speed over a wide range of moduli, HT-1080s adopted rounded morphologies on all surfaces investigated, which contrasted with well spread primary human mesenchymal stem cells (hMSCs). Taken together, our results demonstrate that HT-1080s are morphologically distinct from primary mesenchymal cells (hMSCs) and migrate with minimal dependence on cell adhesion for surfaces within a wide range of moduli, whereas motility is strongly influenced by matrix mechanical properties.

Engineering physical microenvironment for stem cell based regenerative medicine

Regenerative medicine has rapidly evolved over the past decade owing to its potential applications to improve human health. Targeted differentiations of stem cells promise to regenerate a variety of tissues and/or organs despite significant challenges. Recent studies have demonstrated the vital role of the physical microenvironment in regulating stem cell fate and improving differentiation efficiency. In this review, we summarize the main physical cues that are crucial for controlling stem cell differentiation. Recent advances in the technologies for the construction of physical microenvironment and their implications in controlling stem cell fate are also highlighted.

Fibronectin-matrix sandwich-like microenvironments to manipulate cell fate

Conventional 2D substrates fail to represent the natural environment of cells surrounded by the 3D extracellular matrix (ECM).