Medial Closed Wedge Distal Femoral Osteotomy Using a Novel Plate With an Optimal Compression System

Stress Distribution Patterns of the Femorotibial Joint After Medial Closing-Wedge Distal Femoral Varus Osteotomy: An Evaluation Using Computed Tomography Osteoabsorptiometry

BACKGROUND

Distal femoral varus osteotomy (DFVO) is an established surgical procedure for addressing valgus malalignment across various knee conditions. However, the effect of DFVO on stress distribution within the femorotibial joint has not been explored through in vivo studies.

PURPOSE

To (1) explore the distribution pattern of subchondral bone density across the proximal tibia in nonarthritic knees without arthritis and in those of patients with valgus knees, (2) assess changes in the pattern of bone density distribution in patients with valgus knees before and after medial closing-wedge (MCW) DFVO, and (3) determine the correlation between leg alignment and changes in bone density distribution.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

The authors retrospectively analyzed clinical and radiographic data from 14 patients (14 knees; mean age, 44 years; 3 men, 11 women) treated with MCW-DFVO for lateral compartment osteoarthritis (OA) due to valgus malalignment, alongside a control group of 18 patients (18 knees; mean age, 21 years; 4 men, 14 women) without OA. The distribution patterns of subchondral bone density distribution on the femorotibial articular surface of the tibia were examined both preoperatively and >1 year postoperatively using computed tomography osteoabsorptiometry. Quantitative analyses were conducted on the locations and percentages of the high-density areas (HDAs) on the articular surface. The mean time between surgery and the postoperative radiograph and computed tomography absorptiometry imaging was 13.6 months (range, 11-19 months). The mean length of clinical follow-up was 28.7 months (range, 14-62 months) after surgery.

RESULTS

The mean proportion of HDA in the lateral compartment relative to the total HDA (lateral ratio) was significantly greater in the preoperative OA group (58.8%) compared with the control group (41.1%) (P < .001). After MCW-DFVO, the mean lateral ratio in the OA group notably declined to 45.3% (P < .001). The lateral ratio exhibited a significant correlation with the hip-knee-ankle angle in both the control (r = 0.630; P = .011) and OA (r = 0.537; P = .047) groups. Moreover, the alteration in the lateral ratio after MCW-DFVO showed a significant relationship with changes in the hip-knee-ankle angle (r = 0.742; P = .002) and the mechanical lateral distal femoral angle (r = -0.752; P = .002). Within the lateral compartment, HDAs in the 3 lateral regions of the 4 lateral subregions diminished after MCW-DFVO, whereas in the medial compartment, HDAs in the 3 lateral subregions saw an increase.

CONCLUSION

The mean lateral ratio was significantly greater in the preoperative OA group compared with the control group. MCW-DFVO resulted in a redistribution of HDA from the lateral to the medial compartment of the proximal tibial articular surface. The extent of alignment correction after MCW-DFVO was closely linked to the shifts in HDA distribution, reflecting changes in stress distribution.

The relationship between the femoral artery and vastus medialis muscle coverage at the adductor hiatus during medial closed wedge distal femoral osteotomy in valgus knees

Purpose

The purpose of this study was to examine the location where the femoral artery contacts the vastus medialis at the adductor tendon hiatus, which is important when using the subvastus approach in medial closed wedge distal femoral osteotomy. We evaluated the correlation between differences in height, vastus medialis morphology, and lower limb alignment.

Methods

Sixty knees (16 male, 44 female) that underwent plain computer tomography (CT) were included. Using the radiographic hip-knee-ankle (HKA) angle as a reference, the knees were divided into three groups of 20 knees: valgus, varus, and neutral. The mechanical lateral distal femoral angle (mLDFA) and distance from the medial femoral epicondyle to the centre of the femoral head (D1) were measured on full-length weight-bearing anteroposterior radiographs. The first cross-section on CT where the vastus medialis muscle and femoral artery connect was defined as the cross-sectional image for measurement. The direct distance from the medial epicondyle to the measured cross-sectional image (D2) was measured in the coronal view. The ratio of the vastus medialis muscle width to the femoral posterior wall width was defined as the vastus medialis muscle coverage ratio (CR). Correlations between each measurement and group were evaluated.

Results

There was a positive correlation between D1 and D2 in the overall, neutral, and varus groups; however, there was no correlation in the valgus group. A positive correlation was observed in terms of the relationship between CR and D2 in the overall and valgus groups. In addition, there was no statistically significant difference in the correlation between the mLDFA and D2, with patient height as a control variable overall and in all groups.

Conclusion

In the valgus group, distance to the adductor hiatus was correlated with vastus medialis coverage. Overhang of the vastus medialis may be an important influencing factor of femoral and popliteus artery position.

Level of Evidence

Level III, retrospective cohort study.

Morphological analysis of the distal femur as a surgical reference in biplane distal femoral osteotomy

Distal femoral osteotomy (DFO) is performed alone or with high tibial osteotomy (HTO) for patients with osteoarthritis and distal femur deformities. DFO is technically demanding, particularly when creating an anterior flange. Herein, we examined the morphological characteristics of the distal femur based on the cortical shape as a surgical reference for biplanar DFO. Computed tomography images of 50 valgus and 50 varus knees of patients who underwent biplanar DFO or total knee arthroplasty were analyzed. Axial slices at the initial level of the transverse osteotomy in the DFO and slices 10 mm proximal and 10 mm distal to that level were selected. The medial and lateral cortical angles and heights (MCLA, LCLA, MCH, and LCH) were measured on axial slices. Statistical comparisons were performed between the medial and lateral cortices and valgus and varus knees. MCLA and MCH were significantly smaller and lower, respectively, than LCLA and LCH (P < 0.01). The MCLA and MCH of varus knees were significantly smaller and lower, respectively, than those of valgus knees (P < 0.01). Surgeons should carefully observe morphological differences in the distal femur cortex, distinguishing between medial and lateral knees and varus and valgus knees during the creation of the anterior flange in the DFO.

Soft Tissue Stabilization of the Hinge Position for Lateral Closing-Wedge Distal Femoral Osteotomy: An Anatomic Study

Background

Soft tissue plays an important role in stabilizing the hinge point for osteotomy around the knee. However, insufficient data are available on the anatomic features of the soft tissue around the hinge position for lateral closing-wedge distal femoral osteotomy (LCWDFO).

Purpose

To (1) anatomically analyze the soft tissue around the hinge position for LCWDFO, (2) histologically analyze the soft tissue based on the anatomic analysis results, and (3) radiologically define the appropriate hinge point to prevent unstable hinge fracture based on the results of the anatomic and histological analyses.

Study Design

Descriptive laboratory study.

Methods

In 20 cadaveric knees (age, 82.7 ± 7.8 years; range, 60-96 years), the soft tissue of the distal medial side of the femur was anatomically analyzed. The thicknesses of the periosteum and direct insertion of the adductor tendon (AT) were histologically examined and measured using an electron microscope. The thickness of the periosteum was visualized graphically, and the graph of the periosteum and radiograph of the knee were overlaid using image editing software. The appropriate hinge position was determined based on the periosteal thickness and attachment of the AT.

Results

The mean thickness of the periosteum of the metaphysis was 352.7 ± 58.6 µm (range, 213.6-503.4 µm). The overlaid graph and radiograph revealed that the thickness of the periosteum changed at the part corresponding to the transition between the diaphyseal and metaphyseal ends of the femur. The mean width of the AT attached to the distal medial femur from the adductor tubercle toward the distal direction was 7.9 ± 1.3 mm (range, 6.3-9.7 mm).

Conclusion

Results indicated that the periosteum and AT support the hinge for LCWDFO within the area surrounded by the apex of the adductor tubercle and the upper border of the posterior part of the lateral femoral condyle.

Clinical Relevance

When the hinge point is located within the area surrounded by the apex of the adductor tubercle and the upper border of the posterior part of the lateral femoral condyle, these soft tissues work as stabilizers, and there is no risk of cutting into the joint space.

Simultaneous medial closing wedge distal femoral varus osteotomy and double-bundle anterior cruciate ligament reconstruction in the symptomatic femoral valgus deformity: A case report

Distal femoral varus osteotomy (DFVO) is a widely recognized surgical procedure used to address valgus malalignment in patients with knee joint disorders. However, it still remains unclear whether anterior cruciate ligament (ACL) reconstruction can be performed in a single procedure along with DFVO. Herein, we present a 73-year-old female patient who developed lateral osteoarthritis of the knee with valgus alignment due to chronic ACL deficiency following a twisting injury during skiing. She was physiologically very active, and strongly demanded to return to sports. We performed a combined procedure involving a medial closing wedge DFVO using an anatomical locking plate, along with double-bundle ACL reconstruction. The postoperative radiograph confirmed successful correction of knee alignment, specifically achieving varus alignment with precise conformance of the anatomical plate to the medial contour of the distal femur following the osteotomy. The patient resumed her previous sports activities without experiencing knee pain. The operated knee demonstrated restored anterior stability, as indicated by negative Lachman test results, and regained full range of motion. Both the Knee Injury and Osteoarthritis Outcome Score and the 2011 Knee Society score demonstrated continuous postoperative improvements over the three-year follow-up period, indicating positive functional outcomes and joint preservation. To the best of our knowledge, this is the first case of medial closing wedge DFVO with anatomic double-bundle ACL reconstruction in the symptomatic femoral valgus deformity with chronic ACL deficiency in the literature.

Optimal additional support screw position for prevention of hinge fracture in biplanar closed wedge distal femoral osteotomy

Background

The purpose of this study was to examine the biomechanical significance of supplemental fixation using a positional screw in prevention of the hinge fracture in lateral closed-wedge distal femoral osteotomy (LCW-DFO) by means of a three-dimensional finite element analysis.

Methods

The three-dimensional numerical knee models with LCW-DFO were developed. To assess the mechanical efficacy of the positional screw and determine its optimal position and orientation, in total, 13 screwing methods were analyzed. In the first four methods, the screw was supported by the cortical bone only on the medial surface (mono-cortical). In the other 9 models, the screw was supported by both medial and lateral cortical bones (bi-cortical). Under 1000 N of vertical force and 5 Nm of rotational torques, the highest shear stress value around the medial hinge area was adopted as an analytical parameter.

Results

In mono-cortical methods, with the cancellous bone support, all methods were able to reduce the highest stress value compared to the value without the screw, while the efficacy was rather inferior when the screw was in horizontal direction. Without the cancellous bone support, however, all methods were not able to reduce the stress value. In bi-cortical methods, with the cancellous bone support, almost all screw augmentation methods were able to reduce the stress value. When screwing from the medial to the lateral, it only gets worse when going extremely posterior. Without the cancellous bone support, all methods were able to reduce the stress value.

Conclusion

The mechanical efficacy of the bi-cortical method was proven regardless of the quality of the local cancellous bone.

Femoral-varus tibial-valgus osteotomy (FVTVO) for neutrally-aligned knee osteoarthritis with severe joint line obliquity enables return to sports activities: A case series study

Background

Re-alignment surgeries for uni-compartmental knee osteoarthritis, such as high tibial osteotomy (HTO) for varus knees or distal femoral osteotomy (DFO) for valgus knees, are recognized as standard strategies. However, the treatment strategy has not been established for patients with a neutrally-aligned osteoarthritic knee with severe joint line obliquity (JLO) owing to the combination of a valgus femur and a varus tibia; i.e., type II coronal plane alignment of the knee (CPAK). total knee arthroplasty (TKA) can be an option for CPAK type II-aligned osteoarthritis in older inactive patients. Here, we hypothesized that joint line horizontalization by femoral-varus tibial-valgus osteotomy (FVTVO), which may reduce the shear stress induced by JLO, could be a treatment option for CPAK type II-aligned osteoarthritis in young active patients who wish to return to sports (RTS) activity. Our aim in this study was to evaluate the postoperative results of FVTVO with RTS.

Methods

Our indications for FVTVO are as follows: JLO >5°; mechanical medial proximal tibial angle (mMPTA) < 87°; mechanical lateral distal femoral angle (mLDFA) < 87°; typical osteoarthritis patterns for CPAK type II on magnetic resonance images, namely osteoarthritic change of the lateral tibial spine, medial slip of the femur, and/or lateral meniscal extrusion from the lateral femoral condyle; and flexion contracture <10°. We enrolled patients who wished to RTS and who had a pre-symptom Tegner score ≥5 and had completed at least a 1-year follow-up. For FVTVO, closed-wedge DFO was performed in all femurs; both closed-wedge HTO and open-wedge HTO were used in the tibia, depending on the situation. Range of motion exercises began on the first postoperative day, and full weight-bearing was permitted 6 weeks postoperatively. Jogging was permitted 3 months postoperatively after confirming bone union, and patients could gradually return to their sports activity 6-12 months' postoperatively. The Japanese Orthopaedic Association (JOA) score and knee flexion range were assessed preoperatively and at the last follow-up. Tegner activity scale scores were assessed presymptom, preoperatively, and at the last follow-up. The hip-knee-ankle (HKA) angle, JLO, mMPTA, and mLDFA were evaluated radiologically, and meniscal extrusions, osteoarthritic change, and/or bone marrow edema were assessed on magnetic resonance images.

Results

One man and two women were included in this case series. Two were competitive athletes and one was a mountain climber. The patients' ages were 69, 46, and 57 years (Case 1, 2, and 3, respectively). All patients' CPAK type was converted from type II to type V; i.e., neutral-aligned knee with a neutral joint line, postoperatively. All patients returned to their presymptom sports activity level by the final follow-up. The presymptom/preoperative/final follow-up Tegner scale in Case 1, 2, and 3 were 6/1/6, 5/2/5, and 7/3/7, respectively.

Conclusion

Joint line horizontalization by FVTVO for patients with a neutral-aligned knee with severe JLO provided highly satisfactory clinical results and successfully led to RTS.

Preoperative Ahlbäck radiographic classification grade significantly influences clinical outcomes of double level osteotomy for osteoarthritic knees with severe varus deformity

PURPOSE

The purpose of this study was to examine the relationship between preoperative Ahlbäck radiographic classification grade and the clinical outcomes of double level osteotomy (DLO) performed for osteoarthritic knees with severe varus deformity.

METHODS

The study population comprised a consecutive series of 99 knees (68 patients) for which DLO was performed and follow-up results for a minimum of two years were available. The Ahlbäck radiographic classification system was used to determine the osteoarthritic grade. The following radiological parameters for alignment and bone geometry were measured: mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), joint-line convergence angle (JLCA), and mechanical tibiofemoral angle (mTFA). Clinical results were assessed using the Knee Injury and Osteoarthritis Outcome Score (KOOS) and the International Knee Documentation Committee (IKDC) subjective score preoperatively and at 2 years after surgery. Difference between preoperative and postoperative measurements as well as relationship between Ahlbäck grade and radiological/clinical results were statistically assessed.

RESULTS

The average age of the study participants was 60.9 ± 6.2 years and the mean follow-up period was 45.4 ± 15.2 months. Each of the radiological parameters exhibited preoperative abnormal values. Knees with Ahlbäck grade 3 and 4 osteoarthritis exhibited significantly greater JLCA and mTFA than grade 1 knees. Two years post-surgery, all radiological parameter values measured within a normal range. Clinical evaluation showed significant improvement in KOOS after surgery. Analysis of the relationship between Ahlbäck grade and clinical score showed that the 2-year postoperative KOOS scores in grade 3 and 4 osteoarthritic knees were significantly lower than grade 1 knees (with the mean 2-year KOOS scores of 350.0 ± 79.9, 317.9 ± 78.3, and 420.2 ± 42.9, respectively).

CONCLUSIONS

While DLO may produce significant radiological and clinical improvement in knees with joint space obliteration, Ahlbäck grade 3 and 4 osteoarthritic knees associated with larger JLCA and mTFA showed less satisfactory clinical results compared to grade 1 knees.

LEVEL OF EVIDENCE

IV case series.

Proximal tibiofibular joint (PTFJ) dislocation due to Ehlers-Danlos syndrome: posterolateral open-wedge high tibial osteotomy combined with medial closed-wedge distal femoral osteotomy can correct the severe valgus deformity with a markedly increased tibial posterior slope

Ehlers-Danlos syndrome (EDS) causes joint hypermobility and joint dislocation. Since there are no reports of proximal tibiofibular joint (PTFJ) dislocation caused by EDS, little is known about the long-term course of this disease. A woman in her 40s presented with a posterolaterally depressed tibial condyle and severe valgus deformity caused by a long-standing PTFJ dislocation due to EDS. Considering the pathology, posterolateral open-wedge high tibial osteotomy (PLOWHTO) and medial closed-wedge distal femoral osteotomy were performed according to the deformity analysis. A favourable short-term clinical outcome was obtained and the PTFJ dislocation was reduced over time. Although PLOWHTO has several pitfalls, it is a logical and useful surgical technique that can help treat posterolateral dysplasia of the tibial plateau concomitant with severe valgus deformity, regardless of joint laxity, if performed with attention to pitfalls.

Ankle-Angle-Adjusting Fibular Osteotomy in Closed Wedge High Tibial Osteotomy

Closed-wedge high tibial osteotomy (CWHTO) may be carried out to realign the knee in patients with knee osteoarthritis who do not meet the criteria for open-wedge high tibial osteotomy or total knee arthroplasty. The procedure involves both fibular and tibial osteotomy, and care is needed to prevent peroneal nerve and vessel injury during fibular osteotomy. Notably, use of a tourniquet may mask the development of hematomas or aneurysms until after surgery. We developed a 3-step ankle-angle-adjusting (triple-A) technique to relax the muscles, allowing easy retraction of the peroneal vessels. Crucially, the procedure does not require a tourniquet, thus allowing bleeding to be detected and stopped during surgery. The process involves adjusting the ankle angle by plantar-flexion and applying varus stress to highlight the tension difference between the lateral and posterior compartments; plantar-flexion of the great toe to loosen the flexor hallucis longus muscle, thus exposing the fibular posterior aspect; and valgus stress to loosen the peroneus longus muscle. The muscles can then be retracted sufficiently to allow distal and proximal osteotomies to be performed, and any bleeding can be detected and resolved before wound closure. This technique may improve the ease and safety of fibular osteotomy in patients undergoing CWHTO.

Anatomical implications of the subvastus approach on major vascular injury during a distal femoral osteotomy: a computed tomographic venography study

PURPOSE

This study evaluated major vascular injury risk in distal femoral osteotomy (DFO) via the subvastus approach and examined the relationship between the posterior border of the vastus medialis (VM) and the superficial femoral artery (SFA) and vein (SFV).

METHODS

Eighty limbs from 80 patients were evaluated using lower extremity computed tomographic venography. The positional relationship between the VM, SFA, and SFV was evaluated by measuring the angle between each structure and the horizontal reference point (VMA: VM angle, FAA (femoral arterial angle), FVA (femoral venous angle) and the distance between VM and the SFA and SFV (VMAD: VM-arterial distance, VMVD: VM-venous distance) in each axial slice (0/10/20/30/40 mm) proximal to the level of the superior patellar margin. The proximity of the posterior border of the VM and the SFA/SFV as a vertical distance, measured between the slice of the superior border of the patella and the slice where the posterior border of the VM contacted the SFA was evaluated. Single and multiple regression analyses were performed using the vertical distance as the objective variable.

RESULTS

As the slice shifted proximally, the VMA significantly increased (24.9 ± 8.5, 36.3 ± 8.8, 47.4 ± 11.8, 59.9 ± 14, 70.3 ± 13.7 degrees, respectively, p < 0.001 between all slices) and moved posteromedially from a medial direction. FAA (94.2 ± 7, 86.9 ± 9.2, 78.4 ± 9.7, 71.4 ± 9.8, 66.6 ± 10.5 degree, respectively, p < 0.001 between all slices) and FVA (100.6 ± 4.9, 98.3 ± 5.9, 93.7 ± 7.5, 88 ± 9.2, 81.1 ± 10.5 degrees, respectively, p < 0.001 between all slices) decreased and moved from a posterolateral to a posteromedial direction, while VMAD (35.4 ± 7.8, 24.1 ± 7.3, 14.3 ± 6, 8.4 ± 7, 6.2 ± 6.3 mm, respectively, p < 0.001 between all slices) and VMVD significantly decreased (42.7 ± 7.3, 32 ± 7.4, 22.4 ± 6.8, 14.5 ± 10.6, 8.7 ± 7.1 mm, respectively, p < 0.001 between all slices). The average vertical distance was 36 ± 9.3 mm (range 18.6-61.5 mm). The body height and the patellar length significantly affected the vertical distance.

CONCLUSION

The posterior border of the VM shifted posteromedially from distal to proximal and contacted the SFA at an average of 36 mm from the suprapatellar border. Surgeons should be aware of the risk of major vascular injury during exposure and osteotomy.

LEVEL OF EVIDENCE

Case series, Level IV.