Enhanced bioremediation of lindane-contaminated soils through microbial bioaugmentation assisted by biostimulation with sugarcane filter cake

Exploring the potential of horse amendment for the remediation of HCHs-polluted soils

This study assessed for the first time the bioremediation potential of an organic horse amendment in soils contaminated with solid wastes of the obsolete pesticide lindane (α-hexachlorocyclohexane (α-HCH) = 80 mg kg-1, β-HCH = 40 mg kg-1, γ,δ,ε-HCH≈10 mg kg-1) searching for a self-sufficient bio-based economy. Four treatments were implemented: polluted (PS, ΣHCHs = 130 mg kg-1) and control (CS, ΣHCHs = 1.24 mg kg-1) soils and the respective amended soils (APS and ACS). A commercial amendment, coming from organic wastes, was used for soil biostimulation (5% dry weight), and the temporal evolution of the enzymatic activity (dehydrogenase, β-glucosidase activity, phenoloxidase, arylamidase, phosphatase, and urease) and HCHs concentration of the soils was evaluated over 55 days under controlled humidity and temperature conditions. The horse amendment positively influenced the physicochemical properties of the soil by reducing pH (from 8.3 to 8) and increasing the organic matter (TOC from 0.5 to 3.3%) and nutrient content (P and NH4+ from 24.1 to 13.7 to 142.1 and 41.2 mg kg-1, respectively). Consequently, there was a notable enhancement in the soil biological activity, specifically in the enzymatic activity of dehydrogenase, phenol-oxidase, phosphatase, and urease and, therefore, in HCH degradation, which increased from <1 to 75% after the incubation period. According to the chlorine position on the cyclohexane ring, the following ranking has been found for HCHs degradation: β-HCH (46%) < ε-HCH (57%) < α-HCH (91%) ≈ δ-HCH (91%) < γ-HCH (100%). Pentachlorocyclohexene (PCCH) and 1,2,4-trichlorobenzene (1,2,4-TCB) were identified as HCHs degradation metabolites and disappeared at the end of the incubation time. Although further research is required, these preliminary findings suggest that organic amendments represent a sustainable, harmless, and cost-effective biostimulation approach for remediating soils contaminated with recalcitrant HCHs, boosting the circular economy.

Biodegradation of phenol-contaminated soil and plant growth promotion by Myroides xuanwuensis H13

Physicochemical methods for remediating phenol-contaminated soils are costly and inefficient, making biodegradation an environmentally friendly alternative approach. This study aims to screen for potential phenol-degrading bacteria and to verify the removal capacities of a selected strain in a bioaugmentation experiment at the greenhouse level using Brassica chinensis L. (Chinese cabbage) as the model plant and phenol-contaminated soil. In parallel, pot experiments were conducted using a collaborative approach based on this model system. We found that Myroides xuanwuensis strain H13 showed a high degradation capability, with a 97.67% efficiency in degrading 100 mg/L phenol. Under shaking flask conditions, H13 facilitated the solubilization of tricalcium phosphate and potassium feldspar powder. Pot experiments suggested a phenol removal percentage of 89.22% and enhanced availability of soil phosphorus and potassium for plants with H13 inoculation. In this case, the abundance of soil microbes and the activity of soil enzymes significantly increased as well. Furthermore, both photosynthesis and the antioxidant system in Chinese cabbage were enhanced following H13 inoculation, resulting in its increased yield and quality. Partial least squares path modeling revealed that H13 can primarily affect plant root growth, with a secondary impact on photosynthesis. These findings highlight the potential of biodegradation from phenol-degrading bacteria as a promising strategy for efficient phenol removal from soil while promoting plant growth and health.IMPORTANCEThis study is significant for environmental remediation and agriculture by its exploration of a more environmentally friendly and cost-effective bio-strategy in treating phenol-contaminated soil. These findings have essential implications for environmental remediation efforts and sustainable agriculture. By utilizing the biodegradation capabilities of Myroides xuanwuensis strain H13, it is possible to remove phenol contaminants from the soil efficiently, reducing their negative effects. Furthermore, the enhanced growth and health of the Chinese cabbage plants indicate the potential of this approach to promote sustainable crop production.

Exploring the role of microbes for the management of persistent organic pollutants

Persistent organic pollutants (POPs) are chemicals which have been persisting in the environment for many years due to their longer half-lives. POPs have gained attention over the last few decades due to the unsustainable management of chemicals which led to their widespread and massive contamination of biota from different strata and environments. Due to the widespread distribution, bio-accumulation and toxic behavior, POPs have become a risk for organisms and environment. Therefore, a focus is required to eliminate these chemicals from the environment or transform into non-toxic forms. Among the available techniques for the removal of POPs, most of them are inefficient or incur high operational costs. As an alternative to this, microbial bioremediation of POPs such as pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals and personal care products is much more efficient and cost-effective. Additionally, bacteria play a vital role in the biotransformation and solubilization of POPs, which reduces their toxicity. This review specifies the Stockholm Convention that evaluates the risk profile for the management of existing as well as emerging POPs. The sources, types and persistence of POPs along with the comparison of conventional elimination and bioremediation methods of POPs are discussed comprehensively. This study demonstrates the existing bioremediation techniques of POPs and summaries the potential of microbes which serve as enhanced, cost-effective, and eco-friendly approach for POPs elimination.

An insights of organochlorine pesticides categories, properties, eco-toxicity and new developments in bioremediation process

Organochlorine pesticides (OCPs) have been used in agriculture, increasing crop yields and representing a serious and persistent global contaminant that is harmful to the environment and human health. OCPs are typically bioaccumulative and persistent chemicals that can spread over long distances. The challenge is to reduce the impacts caused by OCPs, which can be achieved by treating OCPs in an appropriate soil and water environment. Therefore, this report summarizes the process of bioremediation with commercially available OCPs, considering their types, impacts, and characteristics in soil and water sources. The methods explained in this report were considered to be an effective and environmentally friendly technique because they result in the complete transformation of OCPs into a non-toxic end product. This report suggests that the bioremediation process can overcome the challenges and limitations of physical and chemical treatment for OCP removal. Advanced methods such as biosurfactants and genetically modified strains can be used to promote bioremediation of OCPs.

Reinforced Bioremediation of Excessive Nitrate in Atrazine-Contaminated Soil by Biodegradable Composite Carbon Source

Bioremediation is a good alternative to dispose of the excessive nitrate (NO₃^-) in soil and alleviate the secondary salinization of soil, but the presence of atrazine in soil interferes with the bioremediation process. In the present study, the biodegradable composite carbon source with different dosages was added to the atrazine-contaminated soil to intensify the bioremediation of excessive NO₃^-. The atrazine-contaminated soil with a 25 g/kg composite carbon source achieved the optimal NO₃^- removal performance (92.10%), which was slightly higher than that with a 5 g/kg composite carbon source (86.15%) (p > 0.05). Unfortunately, the negative effects of the former were observed, such as the distinctly higher emissions of N₂O, CO₂ and a more powerful global warming potential (GWP). Microbial community analysis showed that the usage of the composite carbon source clearly decreased the richness and diversity of the microbial community, and greatly stimulated nitrogen metabolism and atrazine degradation (p < 0.05). To sum up, the application of a 5 g/kg composite carbon source contributed to guaranteeing bioremediation performance and reducing adverse environmental impacts at the same time.

PAHs, PCBs and OCPs in olive oil during the fruit ripening period of olive fruits

Because of their possible carcinogenic effects, it is crucial to determine levels of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in olive oils. However, there are a few studies about these pollutants' levels in olive oils and no other studies reported PAHs, PCBs and OCPs at the same time and during the ripening period of olives in olive oils. A modified clean-up technique was successfully applied for eliminating lipidic components. Additionally, this study does not just report the concentrations of these pollutants but also inspects the sources depending on the actual sampling site. Also, PCBs and OCPs carcinogenic risks in olive oil were reported for the first time in the literature. This study aims to present levels, carcinogenic risks, sources and concentration changes during the ripening period of these pollutants in olive oil. For this purpose, fruit samples for oil extraction were collected between the beginning of the fruit ripening and harvest period. Obtained olive oils from the fruits were extracted and cleaned up using the QuEChERS method. GC-MS and GC-ECD were used for the quantitative analysis of the targeted pollutants. The average concentrations for ∑₁₆PAHs, ∑₃₇PCBs and ∑₁₀OCPs were 222.48 ± 133.76 μg/kg, 58.26 ± 21.64 μg/kg and 25.48 ± 19.55 μg/kg, respectively. During the harvest period, the concentrations were in a decreasing trend. Calculated carcinogenic risks were above acceptable limits for all groups and traffic, wood-coal burning, atmospheric transport and previous uses were the main sources. Results of the source determination indicated that some possible sources could be prevented with regulations and precautions.

Effective Usage of Biochar and Microorganisms for the Removal of Heavy Metal Ions and Pesticides

The bioremediation of heavy metal ions and pesticides is both cost-effective and environmentally friendly. Microbial remediation is considered superior to conventional abiotic remediation processes, due to its cost-effectiveness, decrement of biological and chemical sludge, selectivity toward specific metal ions, and high removal efficiency in dilute effluents. Immobilization technology using biochar as a carrier is one important approach for advancing microbial remediation. This article provides an overview of biochar-based materials, including their design and production strategies, physicochemical properties, and applications as adsorbents and support for microorganisms. Microorganisms that can cope with the various heavy metal ions and/or pesticides that enter the environment are also outlined in this review. Pesticide and heavy metal bioremediation can be influenced by microbial activity, pollutant bioavailability, and environmental factors, such as pH and temperature. Furthermore, by elucidating the interaction mechanisms, this paper summarizes the microbe-mediated remediation of heavy metals and pesticides. In this review, we also compile and discuss those works focusing on the study of various bioremediation strategies utilizing biochar and microorganisms and how the immobilized bacteria on biochar contribute to the improvement of bioremediation strategies. There is also a summary of the sources and harmful effects of pesticides and heavy metals. Finally, based on the research described above, this study outlines the future scope of this field.

Applied of actinobacteria consortia-based bioremediation to restore co-contaminated systems

Global industrialization and natural resources extraction have left cocktails of environmental pollutants. Thus, this work focuses on developing a defined actinobacteria consortium able to restore systems co-contaminated with pollutants occurring in Argentinian environments. In this context, five actinobacteria were tested in solid medium to evaluate antagonistic interactions and tolerance against lindane (LIN), Reactive Black B-V (RBV), phenanthrene (Ph) and Cr(VI). The strains showed absence of antagonism, and most of them tolerated the presence of individual pollutants and their mixtures, except Micromonospora sp. A10. Thus, a quadruple consortium constituted by Streptomyces sp. A5, M7, MC1, and Amycolatopsis tucumanensis DSM 45259^T, was tested in liquid systems with individual contaminants. The best microbial growth was observed in the presence of RBV and the lowest on Cr(VI). Removals detected were 83.3%, 65.0% and 52.4% for Ph, RBV and LIN, respectively, with absence of Cr(VI) dissipation. Consequently, the consortium performance was tested against the organic mixture, and a microbial growth similar to the biotic control and a LIN removal increase (61.2%) were observed. Moreover, the four actinobacteria of the consortium survived the mixture bioremediation process. These results demonstrate the potential of the defined actinobacteria consortium as a tool to restore environments co-contaminated with organic pollutants.

Actinobacteria bioaugmentation and substrate evaluation for biobeds useful for the treatment of atrazine residues in agricultural fields

Biopurification systems (BPS) or biobeds are bioprophylaxis systems to prevent pesticide point-source contamination, whose efficiency relies mostly on the pesticide removal capacity of the biomixture, the majority component of a BPS. The adaptation of the components of the biomixtures to local availabilities is a key aspect to ensure the sustainability of the system. In this work, the removal of atrazine (ATZ) was evaluated in biomixtures formulated with three sugarcane by-products as alternative lignocellulosic substrates. Based on the capacity of actinobacteria to tolerate and degrade diverse pesticides, the effect of biomixtures bioaugmentation with actinobacteria was evaluated as a strategy to enhance the depuration capacity of biobeds. Also, the effect of ATZ and/or the bioaugmentation on microbial developments and enzymatic activities were studied. The biomixtures formulated with bagasse, filter cake, or harvest residue, reached pesticide removal values of 37-41% at 28 d of incubation, with t_1/2 between 37.9 ± 0.4 d and 52.3 ± 0.4 d. The bioaugmentation with Streptomyces sp. M7 accelerated the dissipation of the pesticide in the biomixtures, reducing ATZ t_1/2 3-fold regarding the controls, and achieving up to 72% of ATZ removal. Atrazine did not exert a clear effect on microbial developments, although most of the microbial counts were less in the contaminated biomixtures at the end of the assay. The bioaugmentation improved the development of the microbiota in general, specially actinobacteria and fungi, regarding the non-bioaugmented systems. The inoculation with Streptomyces sp. M7 enhanced acid phosphatase activity and/or reversed a possible effect of the pesticide over this enzymatic activity.

Exploring the significance of nanomaterials and organic amendments - Prospect for phytoremediation of contaminated agroecosystem

Emerging micro-pollutants have rapidly contaminated the agro-ecosystem, posing serious challenges to a sustainable future. The vast majority of them have infiltrated the soil and damaged agricultural fields and crops after being released from industry. These pollutants and their transformed products are also transported in vast quantities which further exacerbate the damage. Sustainable remediation techniques are warranted for such large amounts of contaminants. As aforementioned, many of them have been detected at very high concentrations in soil and water which adversely affect crop physiology by disrupting different metabolic processes. To combat this situation, nanomaterials and other organic amendments assisted phytoremediation ware considered as a viable alternative. It is a potent synergistic activity between the biological system and the supplied organic or nanomaterial material to eliminate emerging contaminants and micropollutants from crop fields. This can be effectively be applied to degraded crop fields and could potentially embody a green technology for sustainable agriculture.

Impacts of earthworm casts on atrazine catabolism and bacterial community structure in laterite soil

Atrazine accumulation in agricultural soil is prone to cause serious environmental problems and pose risks to human health. Vermicomposting is an eco-friendly approach to accelerating atrazine biodegradation, but the roles of earthworm cast in the accelerated atrazine removal remains unclear. This work aimed to investigate the roles of earthworm cast in promoting atrazine degradation performance by comprehensively exploring the change in atrazine metabolites and bacterial communities. Our results showed that earthworm cast amendment significantly increased soil pH, organic matters, humic acid, fulvic acid and humin, and achieved a significantly higher atrazine removal efficiency. Earthworm cast addition also remarkably changed soil microbial communities by enriching potential soil atrazine degraders (Pseudomonadaceae, Streptomycetaceae, and Thermomonosporaceae) and introducing cast microbial degraders (Saccharimonadaceae). Particularly, earthworm casts increased the production of metabolites deethylatrazine and deisopropylatrazine, but not hydroxyatrazine. Some bacterial taxa (Gaiellaceaea and Micromonosporaceae) and humus (humic acid, fulvic acid and humin) were strongly correlated with atrazine metabolism into deisopropylatrazine and deethylatrazine, whereas hydroxyatrazine production was benefited by higher pH. Our findings verified the accelerated atrazine degradation with earthworm cast supplement, providing new insights into the influential factors on atrazine bioremediation in vermicomposting.

Lindane removal in contaminated soil by defined microbial consortia and evaluation of its effectiveness by bioassays and cytotoxicity studies

Lindane contamination in different environmental matrices has been a global concern for long. Bacterial consortia consisting of Paracoccus sp. NITDBR1, Rhodococcus rhodochrous NITDBS9, Ochrobactrum sp. NITDBR3, NITDBR4 and NITDBR5 were used for the bioremediation of soil artificially contaminated with lindane. The bacteria, Paracoccus sp. NITDBR1 and Rhodococcus rhodochrous NITDBS9, have been selected based on their lindane degrading capacity in liquid culture conditions (~80-90 %). The remaining three bacteria were chosen for their auxiliary properties for plant growth promotion, such as nitrogen fixation, phosphate solubilization, indole-3-acetic acid production and ammonia production under in vitro conditions. In this study, market wastes, mainly vegetable wastes, were added to the soil as a biostimulant to form a biomixture for assisting the degradation of lindane by bioaugmentation. Residual lindane was measured at regular intervals of 7 days to monitor the biodegradation process. It was observed that the consortium could degrade ~80% of 50 mg kg^-1 lindane in soil which was further increased in the biomixture after six weeks of incubation. Bioassays performed on plant seeds and cytotoxicity studies performed on human skin fibroblast and HCT116 cell lines revealed that the groups contaminated with lindane and treated with the bacterial consortium showed lower toxicity than their respective controls without any bacteria. Hence, the use of both pesticide degrading and plant growth-promoting bacteria in a consortium can be a promising strategy for improved bioremediation against chemical pesticides, particularly in soil and agricultural fields, simultaneously enhancing crop productivity in those contaminated soil.

Actinobacteria: An eco-friendly and promising technology for the bioaugmentation of contaminants

Over the past two decades, various eco-friendly approaches utilizing microbial species to clean up contaminated environments have surfaced. In this aspect, actinobacteria have demonstrated their potential in contaminant degradation. The members of actinobacteria phylum exhibits a cosmopolitan distribution, which means that they can be found widely in both aquatic and terrestrial ecosystems. Actinobacteria play important ecological roles in the environment, such as degrading complex polymers, recycling compounds, and producing bioactive molecules. Hence, using actinobacteria to clean up contaminants is an attractive method in the field of biotechnology. This can be achieved through the green technology of bioaugmentation, whereby the degradative capacity of contaminated areas can be greatly improved through the introduction of specific microorganisms. This review describes actinobacteria as an eco-friendly and a promising technology for the bioaugmentation of contaminants, with focus on pesticides and heavy metals.

Streptomyces: connecting red-nano and grey biotechnology fields

Anthropogenic activities are often related to the occurrence of simultaneous contaminations with heavy metals and toxic organic compounds. In addition, the increasing demand for food, clothing, and technology has increased the worldwide contamination level. Although it is not fully demonstrated, the high level of contamination in association with the indiscriminate use of antibiotics, led to the appearance of multi-resistant pathogenic microorganisms. Grey and red biotechnologies try to counteract the negative effects of pollution and antimicrobial resistance respectively. Streptomyces is well known in the field of biotechnology. In this review, we discussed the potential of these bacteria to deal with organic and inorganic pollutants and produce nanostructures with antimicrobial activity. To our knowledge, this is the first work in which a biotechnological bacterial genus such as Streptomyces is revised in two different fields of global concern, contamination, and multi-drugs resistant microorganisms.

Degradation of organometallic pollutants of distillery wastewater by autochthonous bacterial community in biostimulation and bioaugmentation process

This study aimed to detoxify and degrade the organometallic pollutants from distillery wastewater by using an autochthonous microbial community via biostimulation and bioaugmentation process. Results revealed that the wastewater contained high concentrations of the metals i.e. Fe-2403; Zn-210.15; Cr- 22.825; Cu-73.62; Mg-27.30; Ni-14.425; and Pb-17.33 (mg L^-1). The biostimulation and bioaugmentation process resulted from a substantial reduction (50-70%) in the pollution load. Scanning electron microscopy analysis showed bacterial community and their relationship with complex organometallic pollutants during the chemical reactions. The major identified organic pollutants in the control (untreated) samples were acetic acid, Oxo-,trimethylsilyl ester [CAS], Hydrocinnamic acid, p-[Trimethylsiloxy]-trimethylsilyl ester and tetradecanoic acid, trimethylsilyl ester [CAS] while some new metabolic products were generated as a by-product in bioaugmentation process. Therefore, the study showed that biostimulation and bioaugmentation were successful bioremediation strategies for the detoxification of distillery wastewater and restoration of organometallic polluted sites.

Evaluation of the sequential coupling of a bacterial treatment with a physicochemical process for the remediation of wastewater containing Cr and organic pollutants

A restoration strategy was developed for the treatment of two artificial liquid systems (Minimal Medium, MM, and Water Carbon Nitrogen, WCN) contaminated with Cr(VI), lindane (γ-HCH), phenanthrene (Phe), and reactive black 5 (RB5), through the use of an actinobacteria consortium, coupled with a physicochemical treatment using a column filled with nano-scale zero valent iron particles immobilized on dried Macrocystis pyrifera algae biomass. The Sequential Treatment A (ST_A: physicochemical followed by biological method) removed the three organic compounds with different effectiveness; however, it was very ineffective for Cr(VI) removal. The Sequential Treatment B (ST_B: biological followed by the physicochemical method) removed the four compounds with variable efficiencies. The removal of γ-HCH, Phe, and RB5 in both effluents did not present significant differences, regardless of the sequential treatment used. The highest removal of Cr(VI) and total Cr was observed in MM and WCN, respectively. Ecotoxicity tests (L. sativa) of the effluents treated with both methodological couplings demonstrated that the toxicity of WCN only decreased at the end of ST_A, while that of MM decreased at all stages of both sequential treatments. Therefore, MM would be more appropriate to perform both treatments.

Cobalt mediated electro-scrubbers for the degradation of gaseous perchloroethylene

This work focuses on the treatment of gaseous perchloroethylene (PCE) using electro-scrubbing with diamond electrodes and cobalt mediators. PCE was obtained by direct desorption from an aqueous solution containing 150 mg L^-1, trying to a real pollution case. The electro-scrubber consisted of a packed absorption column connected with an undivided electrochemical cell. Diamond anodes supported on two different substrates (tantalum and silicon) were used and the results indicated that Ta/BDD was more successful in the production of Co (III) species and in the degradation of PCE. Three experimental systems were studied for comparison purposes: absorbent free of Co (III) precursors, absorbent containing Co (III) precursors, and absorbent containing Co (III) precursors undergoing previous electrolysis to the electro-scrubbing to facilitate the accumulation of oxidants. The most successful option was the last, confirming the important role of mediated electrochemical processes in the degradation of PCE. Trichloroacetic acid (TCA) and carbon tetrachloride (CCl₄) were found as the primary reaction products and ethyl chloroacetate esters were also identified. A comprehensive mechanism of the processes happening inside electro-scrubber is proposed.

Glycerol as a substrate for actinobacteria of biotechnological interest: Advantages and perspectives in circular economy systems

Actinobacteria represent a ubiquitous group of microorganisms widely distributed in ecosystems. They have diverse physiological and metabolic properties, including the production of extracellular enzymes and a variety of secondary bioactive metabolites, such as antibiotics, immunosuppressants, and other compounds of industrial interest. Therefore, actinobacteria have been used for biotechnological purposes for more than three decades. The development of a biotechnological process requires the evaluation of its cost/benefit ratio, including the search for economic and efficient substrates for microorganisms development. Biodiesel is a clean, renewable, quality and economically viable source of energy, which also contributes to the conservation of the environment. Crude glycerol is the main by-product of biodiesel production and has many properties, so it has a commercial value that can be used to finance the biofuel production process. Actinobacteria can use glycerol as a source of carbon and energy, either pure o crude. A circular economy system aims to eliminate waste and pollution, keep products and materials in use, and regenerate natural systems. Although these principles are not yet met, some approaches are being made in this direction; the transformation of crude glycerol by actinobacteria is a process with great potential to be scaled on an industrial level. This review discusses the reports on glycerol as a promising source of carbon and energy for obtaining biomass and high-added value products by actinobacteria. Also, the factors influencing the biomass and secondary metabolites production in bioreactors are analyzed, and the tools available to overcome those that generate the main problems are discussed.

Bioaugmentation Technology for Treatment of Toxic and Refractory Organic Waste Water Based on Artificial Intelligence

With the development of modern chemical synthesis technology, toxic and harmful compounds increase sharply. In order to improve the removal efficiency of refractory organic matter in waste water, the method of adding powdered activated carbon (PAC) to the system for adsorption was adopted. Through the analysis of organic matter removal rule before and after waste water treatment, it can be found that PAC is easy to adsorb hydrophobic organic matter, while activated sludge is easy to remove hydrophilic and weakly hydrophobic neutral organic matter. Powdered activated carbon-activated sludge SBR system (PAC-AS) system is obviously superior to AS and PAC system in removing organic matter of hydrophilic and hydrophobic components, that is, biodegradation and PAC adsorption are additive. Compared with the control system, the Chemical Oxygen Demand (COD) removal rate of refractory substances increased by 8.36%, and PAC had a good adsorption effect on small molecular weight organic compounds, but with the increase of molecular weight of organic compounds, the adsorption effect of PAC gradually weakened, and it had no adsorption effect on macromolecular organic compounds. Based on the research of fuzzy control theory, an Agent control system for ozone oxidation process of industrial waste water based on Mobile Agent Server (MAS) theory was established, which was realized by fuzzy control method. The simulation results showed strong stability and verified the feasibility and adaptability of the distributed intelligent waste water treatment system based on MAS theory in the actual control process.

Biotechnological basis of microbial consortia for the removal of pesticides from the environment

The application of microbial strains as axenic cultures has frequently been employed in a diverse range of sectors. In the natural environment, microbes exist as multispecies and perform better than monocultures. Cell signaling and communication pathways play a key role in engineering microbial consortia, because in a consortium, the microorganisms communicate via diffusible signal molecules. Mixed microbial cultures have gained little attention due to the lack of proper knowledge about their interactions with each other. Some ideas have been proposed to deal with and study various microbes when they live together as a community, for biotechnological application purposes. In natural environments, microbes can possess unique metabolic features. Therefore, microbial consortia divide the metabolic burden among strains in the group and robustly perform pesticide degradation. Synthetic microbial consortia can perform the desired functions at naturally contaminated sites. Therefore, in this article, special attention is paid to the microbial consortia and their function in the natural environment. This review comprehensively discusses the recent applications of microbial consortia in pesticide degradation and environmental bioremediation. Moreover, the future directions of synthetic consortia have been explored. The review also explores the future perspectives and new platforms for these approaches, besides highlighting the practical understanding of the scientific information behind consortia.

Use of glycerol for the production of actinobacteria with well-known bioremediation abilities

In recent years, there has been an increasing interest in the remediation of contaminated environments, and a suitable solution is in situ bioremediation. To achieve this, large-scale bacterial biomass production should be sustainable, using economic culture media. The main aim of this study was to optimize the physicochemical conditions for the biomass production of an actinobacterium with well-known bioremediation ability using inexpensive substrates and to scale-up its production in a bioreactor. For this, the growth of four strains of actinobacteria were evaluated in minimal medium with glucose and glycerol as carbon and energy sources. In addition, l-asparagine and ammonium sulfate were assayed as alternative nitrogen sources. The strain Streptomyces sp. A5 showed the highest biomass production in shake-flasks culture using glycerol and ammonium sulfate as carbon and nitrogen sources, respectively. Factorial designs with five factors (glycerol concentration, inoculum size, pH, temperature, and agitation) were employed to optimize the biomass production of Streptomyces sp. A5. The maximum biomass production was obtained using 5 g L^-1 of glycerol, 0.25 µL of inoculum, pH 7, 30 °C and 200 rpm. Finally, the production was successfully scaled to a 2 L stirred tank bioreactor.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-020-02588-5.

Bioremediation of lindane-contaminated soils by combining of bioaugmentation and biostimulation: Effective scaling-up from microcosms to mesocosms

The scaling-up of lindane-contaminated soils bioremediation from microcosms to mesocosms bioaugmentated with an actinobacteria quadruple culture and biostimulated with sugarcane filter cake (SCFC) was surveyed. Mesocosms of silty loam soil, clayey soil, and sandy soil were polluted with the pesticide, bioaugmented with the mixed culture, biostimulated with adequate amounts of 0.5 mm SCFC particles, and assessed during 63 days maintaining environmental parameters with minimal intervention. Samples were taken to determine residual lindane, heterotrophic microorganisms, enzymatic activities, and bioremediation effectiveness using ecotoxicity tests with Raphanus sativus, Lactuca sativa, and Lycopersicon esculentum. The bioaugmentation and biostimulation of the three soils improved lindane removal, microbial counts, and enzymatic activities, and reduced pesticide T_1/2, regarding the values obtained in non-bioremediated controls. The removal process was significantly affected by the soil type, and the highest pesticide dissipation (82.6%) was detected in bioremediated sandy soil. Ecotoxicity tests confirmed the bioremediation success through a rise in the vigor index of seedlings compared to non-treated soils (R. sativus: 12-22%; L. sativa: 12-20%; L. esculentum: 30-45%). Finally, scanning electron microscopy corroborated soil colonization by actinobacteria. Successful scaling-up of the combined application of an actinobacteria quadruple culture and SCFC as an appropriate strategy for restoring lindane-polluted soils at mesocosms-scale was confirmed.

Global trends in pesticides: A looming threat and viable alternatives

Pesticides are widely used chemical compounds in agriculture to destroy insects, pests and weeds. In modern era, they form an indispensable part of agricultural and health practices. Globally, nearly 3 billion kg of pesticides are used every year with a budget of ~40 billion USD. This extensive usage has increased the crop yield as well as led to significant reduction in harvest losses and thereby, enhanced food availability. On the other hand, indiscriminate usage of these chemicals has led to several environmental implications and caused adverse effects on human health. Epidemiological evidences have revealed the harmful effects of pesticides exposure on various organs including liver, brain, lungs and colon. Recent investigations have shown that pesticides can also lead to fatal consequences such as cancer among individuals. These chemicals enter ecosystem, thus hampering the sensitive environmental equilibrium through bio-accumulation. Due to their non-biodegradable nature, they can persist in nature for years and are regarded as potent biohazard. Worldwide, very few surveillance methods have been considered, which can bring awareness among the individuals, therefore the present review is an attempt to delineate consequences induced by various types of pesticide exposure on the environment. Further, the prospective of biopesticides use could facilitate the increase of crop production without compromising human health.

Effects of homemade biosurfactant from Bacillus methylotrophicus on bioremediation efficiency of a clay soil contaminated with diesel oil

Despite constant progress in the understanding of the mechanisms related to the effects of biosurfactants in the bioremediation processes of oily residues, the possibility of antagonist effects on microbial growth and the production in situ of these compounds must be elucidated. The aims of this work were a) to evaluate the effects of the addition of a homemade biosurfactant of Bacillus methylotrophicus on the microbial count in soil in order to determine the possibility of inhibitory effects, and b) to accomplish biostimulation using media prepared with whey and bioaugmentation with B. methylotrophicus, analyzing the effects on the bioremediation of diesel oil and evidencing the in situ production of biosurfactants through effects on surface tension. The homemade bacterial biosurfactant did not present inhibitory effects acting as a biostimulant until 4000 mg biosurfactant/kg of soil. The biostimulation and bioaugmentation presented similar better results (p > 0.05) with the degradation of oil (~60%) than natural attenuation due to the low quantities of biostimulants added. For bioaugmentated and biostimulated soils, a decrease of surface tension between 30 and 60 days was observed, indicating the production of tensoactives in the soil, which was not observed in natural attenuation or a control treatment.