Electrochemical oxidation of indanthrene blue dye in a filter-press flow reactor and toxicity analyses with Raphidocelis subcapitata and Lactuca sativa

Efficient photoelectrochemical real textile wastewater detoxification using photoanodes of C3N4-BiVO4

Photoelectrochemical systems utilizing solar energy have garnered significant attention for their sustainability in remediating contaminated water. This study focuses on advancing photoanode development through the utilization of carbon nitrides (C3N4) and bismuth vanadate (BiVO4), two promising semiconductor materials renowned for their efficient electron-hole pair separation leading to enhanced photocatalytic activity. Four distinct materials were synthesized and compared: BiVO4 over C3N4, C3N4 over BiVO4, and pristine BiVO4 and C3N4. Upon electrochemical analysis, the C3N4-BiVO4 heterostructure exhibited the highest photoelectrocatalytic charge transfer constant, mobility, and lifetime of charge carriers. Capitalizing on these exceptional properties, the composite was applied to remove organic matter real effluent from the textile industry. The photoelectrodegradation of the effluent demonstrated substantial removal of Total Organic Carbon (TOC) and the generation of low toxicity degradation products, accompanied by low energy consumption. The compelling results underscore the high potential of the synthesized C3N4-BiVO4 heterostructure for industrial applications, particularly in addressing environmental challenges associated with textile industry effluents.

A review on existing and emerging approaches for textile wastewater treatments: challenges and future perspectives

This comprehensive review explores the complex environment of textile wastewater treatment technologies, highlighting both well-established and emerging techniques. Textile wastewater poses a significant environmental challenge, containing diverse contaminants and chemicals. The review presents a detailed examination of conventional treatments such as coagulation, flocculation, and biological processes, highlighting their effectiveness and limitations. In textile industry, various textile operations such as sizing, de-sizing, dyeing, bleaching, and mercerization consume large quantities of water generating effluent high in color, chemical oxygen demand, and solids. The dyes, mordants, and variety of other chemicals used in textile processing lead to effluent variable in characteristics. Furthermore, it explores innovative and emerging techniques, including advanced oxidation processes, membrane filtration, and nanotechnology-based solutions. Future perspectives in textile wastewater treatment are discussed in-depth, emphasizing the importance of interdisciplinary research, technological advancements, and the integration of circular economy principles. Numerous dyes used in the textile industry have been shown to have mutagenic, cytotoxic, and ecotoxic potential in studies. Therefore, it is necessary to assess the methods used to remediate textile waste water. Major topics including the chemical composition of textile waste water, the chemistry of the dye molecules, the selection of a treatment technique, the benefits and drawbacks of the various treatment options, and the cost of operation are also addressed. Overall, this review offers a valuable resource for researchers and industry professionals working in the textile industry, pointing towards a more sustainable and environmentally responsible future.

Bactericidal activity of Ag4V2O7/β-AgVO3 heterostructures against antibiotic-resistant Klebsiella pneumoniae

Although Ag-based materials are efficient against antibiotic-resistant bacteria, their high toxicity to living organisms represents a major challenge for obtaining useful products. In this work, we report the bactericidal activity of Ag₄V₂O₇/β-AgVO₃ heterostructures, which proved to be effective against Klebsiella pneumoniae (ATCC 1706, a standard strain; A54970, a multidrug-resistant carbapenemase (KPC)-producing strain; A34057, a multidrug-resistant strain capable of producing extended spectrum beta-lactamases (ESBL); and a community-isolated strain, A58240) at minimum inhibitory concentrations (MIC) as low as 62.5 μg/mL. This activity is higher than that reported for the individual silver vanadates (Ag₄V₂O₇ or β-AgVO₃) owing to the synergistic interactions between both semiconductors. However, the most efficient heterostructure was found to be toxic to mouse 3 T3 fibroblasts and to L. sativa and C. sativus seeds, as indicated by MTT ((4,5 - dimethylthiazol -2yl) 2,5 -diphenylbromide), neutral red assays and germination index measurements. The antimicrobial, phytotoxic and cytotoxic activities were all associated with an efficient generation of reactive oxygen species (ROS) in the heterostructure, especially OH and O₂^- radicals. The ROS production by Ag₄V₂O₇/β-AgVO₃ heterostructures was measured through photodegradation studies with Rhodamine B. While the bactericidal activity of the heterostructures is promising, especially when compared to Ag-based materials, their use in practical applications will require encapsulation either to avoid leaching or to mitigate their toxicity to humans, animals and plants.

Variation of current density with time as a novel method for efficient electrochemical treatment of real dyeing wastewater with energy savings

Electro-oxidation is a promising technology for wastewater treatment with biorefractory organic and nitrogen pollutants; however, the high energy demand hinders its wide application. In this study, a novel method by regulating significant parameter during the electro-oxidation process in a timely manner for real dyeing wastewater treatment with energy savings was studied. Operating factors (i.e., flow rate, initial pH value, electrode distance, and current density) were investigated for chemical oxygen demand (COD) and ammonia removal, and the results indicated that current density was the key factor that obviously influenced the electrochemical performance. Indirect oxidation by active chlorine was then confirmed as the main reaction pathway for pollutant oxidation, and the relationship between the current density and the generation of active chlorine was established, suggesting that a large part of the generated active chlorine was not utilized effectively. Subsequently, a novel method of varying the current density in a timely manner based on the reaction mechanism was proposed; the results indicated that, with similar pollutant removal efficiencies, energy consumption could be reduced from 31.6 to 20.5 kWh/m3. Additionally, the novel system was further optimized by Box-Behnken design: The COD removal efficiency could reach 71.8%, and the energy demand could be reduced by 45.6%.

Toward efficient electrocatalytic degradation of iohexol using active anodes: A laser-made versus commercial anodes

The X-ray iodinated contrast medium iohexol is frequently detected in aquatic environments due to its high persistence and the inefficiency of its degradation by conventional wastewater treatments. Hence, the challenge faced in this study is the development of an alternative electrochemical treatment using active anodes. We investigate the oxidation of iohexol (16.42 mg L^-1) using different operating conditions, focusing on the role of different mixed metal oxide anodes in the treatment efficiency. The electrocatalytic efficiency of the Ti/RuO₂-TiO₂ anode prepared using a CO₂ laser heating and an ionic liquid is compared with Ti/RuO₂-TiO₂-IrO₂ and Ti/IrO₂-Ta₂O₅ commercial anodes. The hypochlorite ions generated by the anodes are also analyzed. The effect of the electrolyte composition (NaCl, Na₂SO₄, and NaClO₄) and current density (15, 30, and 50 mA cm^-2) on the iohexol degradation is also studied. The Ti/RuO₂-TiO₂ laser-made anode is more efficient than the commercial anodes. After optimizing experimental parameters, this anode removes 95.5% of iohexol in 60 min and displays the highest kinetic rate (0.059 min^-1) with the lowest energy consumption per order (0.21 kWh m^-3order^-1), using NaCl solution as the electrolyte and applying 15 mA cm^-2. Additionally, iohexol-intensified groundwater was used to compare the efficiency of anodes. The Ti/RuO₂-TiO₂ is also more efficient in removing the organic charge from the real water matrix (21.7% TOC) than the commercial anodes. Notably, the iohexol removal achieved is higher than all electrochemical treatments already reported using state-of-the-art non-active anodes in lower electrolysis time. Therefore, data from this study indicate that the electrochemical degradation of iohexol using the Ti/RuO₂-TiO₂ anode is efficient and has excellent cost-effectiveness; thus, it is a promising approach in the degradation of iohexol from wastewater. Furthermore, the Ti/RuO₂-TiO₂ active anode is competitive and can be an excellent option for treating effluents contaminated with recalcitrant organic compounds such as iohexol.

Application of a phosphonium-based ionic liquid for reactive textile dye removal: Extraction study and toxicological evaluation

Textile dyeing processes are known for their negative environmental impacts due to the production of aqueous effluents containing toxic dyes. Therefore, new wastewater treatment processes need to be developed to treat such effluents, including Liquid-Liquid Extraction (LLE) process using Ionic Liquids (IL). This work aimed to evaluate the application of the hydrophobic IL trihexyltetradecylphosphonium decanoate to extract black, navy, and royal reactive dyes from water and evaluate the toxicological aspects of the resulting water stream. We investigated the effect of selected parameters, such as pH (2-12), temperature (20-50 °C), salt effects, dye concentration (0.5-50 mg/L), and phase volume ratio (900-9000) on the dye extraction. The results showed extraction yields as high as 97% for the three dyes and an extraction capacity of approximately 300 mg/g for black and navy dyes and 400 mg/g for royal. The toxicity tests involved Lactuca sativa, Triticum aestivium L, and Daphnia magna as bioindicators. The difference between the toxicity of the dye solutions before and after extraction was not statistically significant when L. sativa and Triticum aestivum L were used as bioindicators. However, the extracted solution showed increased toxicity towards D. magna due to traces of IL. Overall, the IL has a high extraction capacity for the black, navy, and royal dyes. Nevertheless, further studies on LLE associated with other processes must be carried out to reduce the risk linked to the toxicity of IL transferred to the water.

A critical review on the treatment of dye-containing wastewater: Ecotoxicological and health concerns of textile dyes and possible remediation approaches for environmental safety

The synthetic dyes used in the textile industry pollute a large amount of water. Textile dyes do not bind tightly to the fabric and are discharged as effluent into the aquatic environment. As a result, the continuous discharge of wastewater from a large number of textile industries without prior treatment has significant negative consequences on the environment and human health. Textile dyes contaminate aquatic habitats and have the potential to be toxic to aquatic organisms, which may enter the food chain. This review will discuss the effects of textile dyes on water bodies, aquatic flora, and human health. Textile dyes degrade the esthetic quality of bodies of water by increasing biochemical and chemical oxygen demand, impairing photosynthesis, inhibiting plant growth, entering the food chain, providing recalcitrance and bioaccumulation, and potentially promoting toxicity, mutagenicity, and carcinogenicity. Therefore, dye-containing wastewater should be effectively treated using eco-friendly technologies to avoid negative effects on the environment, human health, and natural water resources. This review compares the most recent technologies which are commonly used to remove dye from textile wastewater, with a focus on the advantages and drawbacks of these various approaches. This review is expected to spark great interest among the research community who wish to combat the widespread risk of toxic organic pollutants generated by the textile industries.

Enhanced HCB removal using bacteria from mangrove as post-treatment after electrochemical oxidation using a laser-prepared Ti/RuO2-IrO2-TiO2 anode

The environmental persistence of hexachlorobenzene (HCB) is a challenge that promotes studies for efficient treatment alternatives to minimize its environmental impact. Here, we evaluated the HCB removal by electrochemical, biological, and combined approaches. The electrochemical treatment of 4 μM HCB solutions was performed using a synthesized Ti/RuO₂-IrO₂-TiO₂ anode, while the biological treatment using mangrove-isolated bacteria was at 24, 48, and 72 h. The HCB degradability was assessed by analyzing chemical oxygen demand (COD), microbial growth capacity in media supplemented with HCB as the only carbon source, gas chromatography, and ecotoxicity assay after treatments. The synthesized anode showed a high voltammetric charge and catalytic activity, favoring the HCB biodegradability. All bacterial isolates exhibited the ability to metabolize HCB, especially Bacillus sp. and Micrococcus luteus. The HCB degradation efficiency of the combined electrochemical-biological treatment was evidenced by a high COD removal percentage, the non-HCB detection by gas chromatography, and a decrease in ecotoxicity tested with lettuce seeds. The combination of electrochemical pretreatment with microorganism degradation was efficient to remove HCB, thereby opening up prospects for in situ studies of areas contaminated by this recalcitrant compound.