Role of extracellular polymeric substances in sludge dewatering under modified corn-core powder and sludge-based biochar pretreatments

Recovery of phosphorus from chemical-enhanced phosphorus removal sludge: Influence of sodium sulfide dosage on phosphorus fractionation, sludge dewaterability, and struvite product

Despite the potential of sodium sulfide (Na2S) for phosphorus (P) recovery from iron-phosphate waste, the underlying mechanism regarding its impact on P conversion and product quality has not been well addressed. In this study, the effects of Na2S addition on P release and recovery from a chemical-enhanced phosphorus removal (CEPR) sludge during anaerobic fermentation were systematically investigated. The results revealed that the effective mobilization of P bound to Fe (Fe-P) by Na2S dominated the massive P release from the CEPR sludge, while the organic P (OP) release was not significantly enhanced during anaerobic fermentation. Due to the rapid reaction of Na2S with Fe-P and the prevention of Fe(II)-P precipitation by excess S2-, the Fe-P was decreased by 9.7%, 15.2% and 24.9% at S:Fe molar ratios of 0.3, 0.5 and 1, respectively. After anaerobic fermentation, the released P mainly existed as soluble phosphate (SP), P bound to Ca (Ca-P) and P bound to Al (Al-P). The nitrogen and P contents in the fermentation supernatant significantly increased with higher S:Fe ratios, facilitating the efficient recovery of P as high-purity struvite. However, the increased Na2S dosage deteriorated the sludge dewaterability because of the dissolution of hydrophilic extracellular polymeric substances and the looser secondary structure of proteins. Comprehensively considering the P recovery, sludge dewaterability and economic cost, the optimal Na2S dosage was determined at the S:Fe ratio of 0.3. These findings provide novel insights into the role of Na2S in P recovery as struvite from CEPR sludge.

Advanced application of tea residue extracts rich in polyphenols for enhancing sludge dewaterability: Unraveling the role of pH regulation

Tea polyphenols (TPs), as a kind of derivatives from tea waste, were employed as a novel environmentally friendly bio-based sludge conditioner in this study. The findings showed that when TPs were applied at a dosage of 300 mg g-1 DS, the sludge CST0/CST ratio significantly increased to 1.90. pH regulation was found to markedly affect the dewatering efficiency of sludge. At pH 4, the CST0/CST rose to 2.86, coupled with a reduction in the specific resistance to filtration (SRF) from 6.69 × 1013 m kg-1 to 1.43 × 1013 m kg-1 and a decrease in the moisture content (MC) from 90.57% to 68.75%. TPs formed complexes and precipitated sludge proteins, as demonstrated by changes in the extracellular polymeric substances (EPS), viscosity, zeta potential, and particles size distribution. The optimization significance of acidification treatment on sludge structure disintegration, the interaction of TPs with EPS, and the removal of sludge proteins were elucidated. The research provided an ideal approach for the integrated utilization of biomass resources from tea waste and highlighted the potential application of TPs as an environmentally friendly conditioner in sludge dewatering.

Insights into how characteristics of dissolved algal organic matter affect the efficiency of modified clay in controlling harmful algal blooms

Dissolved algal organic matter (dAOM) originating from harmful algal blooms (HABs) can deteriorate the quality of municipal water supplies, threaten the health of aquatic environments, and interfere with modified clay (MC)-based HABs control measures. In this study, we explored the composition of dAOM from Prorocentrum donghaiense, a typical HAB organism, and assessed the influence of dAOM on MC flocculation. Our results suggested that dAOM composition was complex and had a wide molecular weight (MW) distribution. MW and electrical properties were important dAOM characteristics affecting flocculation and algal removal efficiency of MC. Negatively charged high-MW components (>50 kDa) critically affected algal removal efficiency, reducing the zeta potential of MC particles and leading to small and weak flocs. However, the effect of dAOM depended on its concentration. When the cell density of P. donghaiense reached HAB levels, the high-MW dAOM strongly decreased the algal removal efficiency of MC.

Simultaneous change of microworld and biofilm formation in constructed wetlands filled with biochar

As the regulator of constructed wetlands (CWs), biochar is often used to enhance pollutant removal and reduce greenhouse gas emission. Biochar is proved to have certain effects on microbial populations, but its effect on the aggregation of microbial flocs and the formation of biofilms in the CWs has not been thoroughly investigated. Therefore, the above topics were studied in this paper by adding a certain proportion of biochar in aerated subsurface flow constructed wetlands. The results indicated that after adding biochar in the CWs, pollutant removal was enhanced and the removal rate of NH4+-N was increased from 80.76% to 99.43%. The proportion of hydrophobic components in extracellular polymeric substances (EPS) was reduced by adding biochar from 0.0044 to 0.0038, and the affinity of EPS on CH3-SAM was reduced from 5.736 L/g to 2.496 L/g. The weakened hydrophobic and the reduced affinity of EPS caused the initial attachment of microorganisms to be inhibited. The relative abundance of Chloroflexi was decreased after adding biochar, reducing the dense structural skeleton of biofilm aggregates. Correspondingly, the abundance of Bacteroidetes was increased, promoting EPS degradation. Biochar addition helped to increase the proportion of catalytic active proteins in extracellular proteins and decrease the proportion of binding active proteins, hindering the combination of extracellular proteins and macromolecules to form microbial aggregates. Additionally, the proportions of three extracellular protein structures promoting microbial aggregation, including aggregated chain, β-sheet, and 3-turn helix, were decreased to 23.83%, 38.37% and 7.76%, respectively, while the proportions of random coil and antiparallel β-sheet that inhibited microbial aggregation were increased to 14.11% and 8.11%, respectively. An interesting conclusion from the experimental results is that biochar not only can enhance pollutants removal, but also has the potential of alleviating biological clogging in CWs, which is of great significance to realize the sustainable operation and improve the life cycle of CWs.

Behavior of heavy metals in municipal sludge during dewatering: The role of conditioners and extracellular polymeric substances

Heavy metals, the main harmful substances in the sludge, are easily enriched, have adverse effects on the treatment and disposal of the sludge. In this study, two conditioners (modified corn-core powder, MCCP, and sludge-based biochar, SBB) were separately added and jointly added into municipal sludge to enhance sludge dewaterability. Meanwhile, diverse organics, such as extracellular polymeric substances (EPS), were released under pretreatment. The different organics had different effects on each heavy metal fraction and changed the toxicity and bioavailability of the treated sludge. The exchangeable fraction (F4) and carbonate fraction (F5) of heavy metal were nontoxic and nonbioavailable. When MCCP/SBB was used to pretreat the sludge, the ratio of metal-F4 and -F5 decreased, indicating that MCCP/SBB reduced the biological availability and ecological toxicity of the heavy metals in the sludge. These results were consistent with the calculation of the modified potential ecological risk index (MRI). To understand the detailed function of organics in the sludge network, the relationship between EPS, the secondary structure of the protein, and heavy metals was analyzed. The analyses revealed that the increasing proportion of β-sheet in soluble EPS (S-EPS) generated more active sites in the sludge system, which enhanced the chelate or complex function among organics and heavy metals, thus reducing the migration risks.

Effect of KMnO4/pH adjustment of extracellular polymeric substances under waste activated sludge on sludge dewatering

In this study, we examine the dewaterability of sludge after treatment by KMnO4 at various pH levels, with the goal of understanding the dewaterability of strong oxidizers to waste activated sludge. Good dewatering performance is observed, with capillary suction times (CST) reduced from 263.4 to 30.1 s, and specific resistance to filtration (SRF) falling by 19.6%. Proteins and polysaccharides in tightly bound extracellular polymeric substances (EPS) were also significantly reduced. Based on spectroscopic and electrochemical analysis, we propose mechanisms for the improved dewatering in terms of changes to the sludge's physicochemical properties and EPS. Under strong oxidation, the structure surrounding the bound water is oxidized and bound water is released, so the dewaterability of the sludge is improved.Weiliang Pan and Jiaoni Li contributed equally to this work.

Improving sludge dewaterability by free nitrous acid and lysozyme pretreatment: Performances and mechanisms

Reducing the water content of waste activated sludge (WAS) is critical for sludge treatment and disposal in wastewater treatment plants (WWTPs). In this study, a new combined conditioning processes by using lysozyme (LZM) and free nitrous acid (FNA) were proposed and demonstrated to enhance the dewaterability of WAS. The water content of sludge cake dropped from 82.82 % to 68.42 % (1 h FNA treatment + 1 h LZM treatment) and 69.52 % (6 h FNA treatment + 1 h LZM treatment) with the combined FNA and LZM treatment; and the corresponding capillary suction time (CST) reduction efficiency increased 49.29 % (1 h FNA treatment + 1 h LZM treatment) and 52.98 % (6 h FNA treatment + 1 h LZM treatment). A comprehensive investigation conducted in this study revealed the underlying mechanism of dewaterability improvement lies in the transformations of extracellular polymeric substances (EPS). The combined conditioning led to enhanced hydrophobicity in the sludge, as suggested by FTIR protein secondary structure and interfacial free energy. The reduced zeta potential and the potential barrier indicated the reduction of the repulsive force of sludge particles and the bound water content in the conditioned floc. The hydrophobicity, flow permeability and flocculability were enhanced after combined treatment, leading to the release of bound water.

Coupling sludge-based biochar and electrolysis for conditioning and dewatering of sewage sludge: Effect of char properties

The addition of sludge-based biochar during electrochemical pretreatment of sewage sludge, as an efficient hybrid technology, is potentially to be applied in sludge deep-dewatering. The chars functioned as conductors, catalysts and skeleton particles could enhance the sludge dewaterability and increase the calorific value of the dewatered sludge cake. However, the effect of synthesis conditions on the char properties and further on the dewatering performance is still unknown. Herein, the sludge-based particle electrodes (SPEs) under three main synthesis conditions, including liquid-solid ratio, pyrolysis temperature and time, were prepared. The sludge-based biochars (i.e., SPE-400, SPE-600, and SPE-800 pyrolyzed under 400, 600 and 800 °C, respectively) were characterized and utilized as three-dimensional electrodes during sludge electrolysis. The increased pyrolysis temperature (within 400-800 °C) resulted in the enrichment of metallic ions and increment of specific surface area and pore volume of SPE, which led to the increased catalysis and adsorption sites for viscous proteins (PNs). Particularly, the pores of SPE-800 provided more drainage channels as skeleton builders. Compared with raw sludge, the capillary suction time (CST) and the specific resistance of filtration (SRF) of the treated sludge with 3D-SPE-800 were reduced by 58.12% and 81.01%, respectively, but the net sludge solids yield (Y_N) was increased by 87.05%. The highest decrease of hydrophilic α-Helix content in PNs (from 9.93% to 7.30%) was observed when using SPE-800 as particle electrode, revealing the crucial role of char characteristics on protein reduction and subsequent dewatering enhancement. The synergistic effects of electrolysis and sludge-based biochar provided a new insight for a closed-loop pretreatment of sewage sludge in the wastewater treatment plant.

Changes of phosphorus species during (hydro) thermal treatments of iron-rich sludge and their solubilization mediated by a phosphate solubilizing microorganism

This study systematically evaluated phosphorus (P) solubilization from pyrochar and hydrochar derived from both raw sludge and iron-rich sludge. The data indicated, that an increase in thermal treatment temperature and the presence of iron promoted the accumulation of P in both pyrochar (derived at 300, 500, and 800 °C) and hydrochar (derived at 100, 200, and 280 °C). After incubating pyrochar and hydrochar with a phosphate solubilizing microorganism (PSM) (Pseudomonas aeruginosa) for 30 days, PSM significantly promoted the solubilization of P in pyrochar and hydrochar synthesized at low temperatures rather than those at high temperatures, with a 59 % increase for the pyrolysis of raw sludge at 300 °C than that pyrolyzed at 800 °C and a 62 % increase for the hydrothermal treatment of raw sludge at 100 °C than that treated at 280 °C. And the phenomena were more obvious on the char samples derived from iron-rich sludge. The mass balance of different P species in the solid and liquid phases indicated that after incubating with PSM for 30 days, NaOH-P was the main P solubilized from the solid phase of pyrochar and HCl-P was the main P solubilized from the solid phase of hydrochar. Considering P availability to plants, the preliminary economic analysis indicated that the hydrothermal treatment of iron-rich sludge at 100 °C showed the highest economic benefits for P recovery, with the net cost of 28.79 USD/ton wet sludge. This study was useful in giving novel insights into the reuse of char samples as P fertilizer, and also suggested the importance of Pseudomonas aeruginosa and other bacteria in sludge application, particularly in terms of P solubilization.