Bioaugmentation with immobilized endophytic Penicillium restrictum to improve quorum quenching activity for biofouling control in an aerobic hollow-fiber membrane bioreactor treating antibiotic-containing wastewater

A comprehensive study on the co-removal of Cr (VI) and ciprofloxacin via microbial-photocatalytic coupling: Mechanistic insights and performance evaluation

The increasing contamination of water systems by antibiotics and heavy metals has become a growing concern. The intimately coupled photocatalysis and biodegradation (ICPB) approach offers a promising strategy for the effective removal of mixed pollutants. Despite some prior research on ICPB applications, the mechanism by which ICPB eliminates mixed pollutants remains unclear. In our current study, the ICPB approach achieved approximately 1.53 times the degradation rate of ciprofloxacin (CIP) and roughly 1.82 times the reduction rate of Cr (VI) compared to photocatalysis. Remarkably, after 30 days, the ICPB achieved a 96.1% CIP removal rate, and a 97.8% reduction in Cr (VI). Our investigation utilized three-dimensional fluorescence analysis and photo-electrochemical characterization to unveil the synergistic effects of photocatalysis and biodegradation in removal of CIP and Cr (VI). Incorporation of B-Bi3O4Cl (B-BOC) photocatalyst facilitated electron-hole separation, leading to production of ·O2-, ·OH, and h+ species which interacted with CIP, while electrons reduced Cr (VI). Subsequently, the photocatalytic products were biodegraded by a protective biofilm. Furthermore, we observed that CIP, acting as an electron donor, promoted the reduction of Cr (VI). The microbial communities revealed that the number of bacteria favoring pollutant removal increased during ICPB operation, leading to a significant enhancement in performance.

Response of viable bacteria to antibiotics in aerobic granular sludge: Resistance mechanisms and behaviors, bacterial communities, and driving factors

The assessment of antimicrobial resistance (AMR) risk by DNA-based techniques mainly relies on total bacterial DNA. In this case, AMR risk recognition is restricted to the genotype level, lacking crucial phenotypic information, such as the distribution of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) in dead and viable bacteria. This limitation hinders the recognition of AMR behavior. Herein, based on propidium monoazide (PMA) shielding method, this work firstly quantified the intracellular ARGs/MGEs in viable and dead bacteria, and the impact of viable bacteria composition on the formation of intracellular/extracellular polymeric substance-related /cell-free ARGs (i/e/cARGs) and MGEs (i/e/cMGEs) in aerobic granular sludge (AGS). The shielding efficiency of PMA against dead bacteria was optimized to be as high as 97.5% when the MLSS of AGS was 2.0 g/L. Under antibiotic stimulation, 29.0% ∼ 49.0% of iARGs/iMGEs were carried by viable bacteria, and the remaining proportion were carried by dead bacteria. 18 out of the top 20 dominant genera showed a change in abundance by more than 1% after PMA treatment. 29 viable hosts were identified to associate with 52 iARGs, of which 28 and 15 hosts were also linked to 40 eARGs and 26 cARGs. Also, partial least-squares path model and variance partitioning analysis disclosed that viable bacteria and i/e/cMGEs had a positive effect on i/e/cARGs, with both contributing as much as 64.5% to the total ARGs enrichment. These results better visualized the AMR risk carried by viable bacteria and the categories of viable hosts. This work provides a novel insight into analyzing the actual AMR risk and viable hosts, helping to the reduction and control of AMR in wastewater treatment plants.

Biofouling in Membrane Bioreactors-Mitigation and Current Status: a Review

Biological fouling as termed biofouling is caused by varied living organisms and is difficult to eliminate from the environment thus becoming a major issue during membrane bioreactors. Biofouling in membrane bioreactors (MBRs) is a crucial problem in increasing liquid pressure due to reduced pore diameter, clogging of the membrane pores, and alteration of the chemical composition of the water which greatly limits the growth of MBRs. Thus, membrane biofouling and/or microbial biofilms is a hot research topic to improve the market competitiveness of the MBR technology. Though several antibiofouling strategies (addition of bioflocculant or sponge into MBRs) came to light, biological approaches are sustainable and more practicable. Among the biological approaches, quorum sensing-based biofouling control (so-called quorum quenching) is an interesting and promising tool in combating biofouling issues in the MBRs. Several review articles have been published in the area of membrane biofouling and mitigation approaches. However, there is no single source of information about biofouling and/or biofilm formation in different environmental settings and respective problems, antibiofilm strategies and current status, quorum quenching, and its futurity. Thus, the objectives of the present review were to provide latest insights on mechanism of membrane biofouling, quorum sensing molecules, biofilm-associated problems in different environmental setting and antibiofilm strategies, special emphasis on quorum quenching, and its futurity in the biofilm/biofouling control. We believe that these insights greatly help in the better understanding of biofouling and aid in the development of sustainable antibiofouling strategies.

Dynamically driven perovskite La-Fe-modified SrTiO3 nanocubes and their improved photoresponsive activity under visible light: influence of alkaline environment

Visible-light active La-Fe-SrTiO3 (La0.01Sr0.99Fe0.01Ti0.99O3) photocatalysts were synthesized via a dynamic hydrothermal route under different NaOH concentrations (2, 3, 4, 5, and 6 M). The results showed that altering NaOH concentrations changed the physicochemical characteristics of the materials. Namely, the decrease in particle size was observed when the NaOH levels were increased. The specific surface area of the photocatalysts changed with an increased concentration of NaOH, and the maximum value was 17.10 m2/g in 5 M of NaOH. The crystal structure of all prepared samples remained unaffected when altered the NaOH concentration or when incorporated La and Fe in the lattice of SrTiO3. Namely, all samples synthesized under various NaOH concentrations crystallized and maintained in the standard cubic perovskite structure of SrTiO3. The increased NaOH concentration slightly altered the absorption wavelength towards a longer wavelength region. The La atom, replacing some Sr2+ in the structure of modified SrTiO3, was confirmed to be in the La3+ valence state. Simultaneously, Fe atoms demonstrating oxidation states of Fe3+ can also be incorporated into the SrTiO3 network. The photocatalytic degradation of ciprofloxacin antibiotic revealed that the highest performance was approximately 75% within 9 h over the La0.01Sr0.99Fe0.01Ti0.99O3 sample prepared at 5 M of NaOH via the dynamic hydrothermal process. Meanwhile, this photocatalyst also displayed greater activity than the pristine SrTiO3, the single-doped samples (SrFe0.01Ti0.99O3 and La0.01Sr0.99TiO3), and the La0.01Sr0.99Fe0.01Ti0.99O3 sample prepared through a static hydrothermal technique under the same synthesis condition.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

Recent advances in the biological treatment of wastewater rich in emerging pollutants produced by pharmaceutical industrial discharges

Pharmaceuticals and personal care products present potential risks to human health and the environment. In particular, wastewater treatment plants often detect emerging pollutants that disrupt biological treatment. The activated sludge process is a traditional biological method with a lower capital cost and limited operating requirements than more advanced treatment methods. In addition, the membrane bioreactor combines a membrane module and a bioreactor, widely used as an advanced method for treating pharmaceutical wastewater with good pollution performance. Indeed, the fouling of the membrane remains a major problem in this process. In addition, anaerobic membrane bioreactors can treat complex pharmaceutical waste while recovering energy and producing nutrient-rich wastewater for irrigation. Wastewater characterizations have shown that wastewater's high organic matter content facilitates the selection of low-cost, low-nutrient, low-surface-area, and effective anaerobic methods for drug degradation and reduces pollution. However, to improve the biological treatment, researchers have turned to hybrid processes in which all physical, chemical, and biological treatment methods are integrated to remove various emerging contaminants effectively. Hybrid systems can generate bioenergy, which helps reduce the operating costs of the pharmaceutical waste treatment system. To find the most effective treatment technique for our research, this work lists the different biological treatment techniques cited in the literature, such as activated sludge, membrane bioreactor, anaerobic treatment, and hybrid treatment, combining physicochemical and biological techniques.

Biofilm response and removal via the coupling of visible-light-driven photocatalysis and biodegradation in an environment of sulfamethoxazole and Cr(VI)

The widespread contamination of water systems with antibiotics and heavy metals has gained much attention. Intimately coupled visible -light-responsive photocatalysis and biodegradation (ICPB) provides a novel approach for removing such mixed pollutants. In ICPB, the photocatalysis products are biodegraded by a protected biofilm, leading to the mineralization of refractory organics. In the present study, the ICPB approach exhibited excellent photocatalytic activity and biodegradation, providing up to ∼1.27 times the degradation rate of sulfamethoxazole (SMX) and 1.16 times the Cr(VI) reduction rate of visible-light-induced photocatalysis . Three-dimensional fluorescence analysis demonstrated the synergistic ICPB effects of photocatalysis and biodegradation for removing SMX and reducing Cr(VI). In addition, the toxicity of the SMX intermediates and Cr(VI) in the ICPB process significantly decreased. The use of MoS₂/CoS₂ photocatalyst accelerated the separation of electrons and holes, with•O₂^- and h⁺ attacking SMX and e^- reducing Cr(VI), providing an effective means for enhancing the removal and mineralization of these mixed pollutants via the ICPB technique. The microbial community results demonstrate that bacteria that are conducive to pollutant removal are were enriched by the acclimation and ICPB operation processes, thus significantly improving the performance of the ICPB system.

Exploring the Function of Quorum Sensing Regulated Biofilms in Biological Wastewater Treatment: A Review

Quorum sensing (QS), a type of bacterial cell–cell communication, produces autoinducers which help in biofilm formation in response to cell population density. In this review, biofilm formation, the role of QS in biofilm formation and development with reference to biological wastewater treatment are discussed. Autoinducers, for example, acyl-homoserine lactones (AHLs), auto-inducing oligo-peptides (AIPs) and autoinducer 2, present in both Gram-negative and Gram-positive bacteria, with their mechanism, are also explained. Over the years, wastewater treatment (WWT) by QS-regulated biofilms and their optimization for WWT have gained much attention. This article gives a comprehensive review of QS regulation methods, QS enrichment methods and QS inhibition methods in biological waste treatment systems. Typical QS enrichment methods comprise adding QS molecules, adding QS accelerants and cultivating QS bacteria, while typical QS inhibition methods consist of additions of quorum quenching (QQ) bacteria, QS-degrading enzymes, QS-degrading oxidants, and QS inhibitors. Potential applications of QS regulated biofilms for WWT have also been summarized. At last, the knowledge gaps present in current researches are analyzed, and future study requirements are proposed.

Bacteriophage cocktail as a promising bio-enhancer for methanogenic activities in anaerobic membrane bioreactors

This study aimed to explore the effect of a bacteriophage cocktail, pyophage, on the treatment of wastewater containing antibiotics in an anaerobic membrane bioreactor (AnMBR). During the operational period, performance of the AnMBR was monitored through the changes in chemical oxygen demand (COD), antibiotic removal, transmembrane pressure, and biogas production. Microbial community structure and composition, as well as the occurrence of antibiotic resistance genes were analyzed through shotgun metagenomics analysis. When exposed to pyophage, COD removal efficiency was enhanced up to 96%, whereas membrane fouling was delayed by 25%. Average biogas production was doubled from 224.2 mL/d in control with antibiotics to 447.3 mL/d when exposed to pyophage cocktail with considerable alterations to the archaeal and bacterial community structures. Most notably, the methanogenic community shifted from dominance of Methanothermobacter to Methanoculleus, along with syntrophic bacteria. The results provide insight into the synergistic effects of phage-bacteria and methanogenic communities and illustrate the potential of bacteriophages as bio-enhancers.

"Electroactive biofilms: how microbial electron transfer enables bioelectrochemical applications"

Microbial biofilms are ubiquitous. In marine and freshwater ecosystems, microbe–mineral interactions sustain biogeochemical cycles, while biofilms found on plants and animals can range from pathogens to commensals. Moreover, biofouling and biocorrosion represent significant challenges to industry. Bioprocessing is an opportunity to take advantage of biofilms and harness their utility as a chassis for biocommodity production. Electrochemical bioreactors have numerous potential applications, including wastewater treatment and commodity production. The literature examining these applications has demonstrated that the cell–surface interface is vital to facilitating these processes. Therefore, it is necessary to understand the state of knowledge regarding biofilms’ role in bioprocessing. This mini-review discusses bacterial biofilm formation, cell–surface redox interactions, and the role of microbial electron transfer in bioprocesses. It also highlights some current goals and challenges with respect to microbe-mediated bioprocessing and future perspectives.

A comprehensive review on biodegradation of tetracyclines: Current research progress and prospect

The release of tetracyclines (TCs) in the environment is of significant concern because the residual antibiotics may promote resistance in pathogenic microorganisms, and the transfer of antibiotic resistance genes poses a potential threat to ecosystems. Microbial biodegradation plays an important role in removing TCs in both natural and artificial systems. After long-term acclimation, microorganisms that can tolerate and degrade TCs are retained to achieve efficient removal of TCs under the optimum conditions (e.g. optimal operational parameters and moderate concentrations of TCs). To date, cultivation-based techniques have been used to isolate bacteria or fungi with potential degradation ability. Moreover, the biodegradation mechanism of TCs can be unveiled with the development of chemical analysis (e.g. UPLC-Q-TOF mass spectrometer) and molecular biology techniques (e.g. 16S rRNA gene sequencing, multi-omics sequencing, and whole genome sequencing). In this review, we made an overview of the biodegradation of TCs in different systems, refined functional microbial communities and pure isolates relevant to TCs biodegradation, and summarized the biodegradation products, pathways, and degradation genes of TCs. In addition, ecological risks of TCs biodegradation were considered from the perspectives of metabolic products toxicity and resistance genes. Overall, this article aimed to outline the research progress of TCs biodegradation and propose future research prospects.

Enhanced removal of antibiotics using Eichhornia crassipes root biomass in an aerobic hollow-fiber membrane bioreactor

The impact of water hyacinth (Eichhornia crassipes) root biomass (WHRB) on pharmaceutical wastewater treatment with an aerobic hollow-fiber membrane bioreactor (HF-MBR) was investigated. The performance of the bioreactor was assessed in terms of COD (Chemical Oxygen Demand) and antibiotic removal and membrane biofouling rate. For deeper insight, microbial communities in sludge and biofilm layers were analyzed through Illumina sequencing. The addition of WHRB into the HF-MBR increased the COD (by 6%), as well as antibiotics and transformation products removal efficiency. Removal efficiencies of 97%, 98% and 84% were obtained for removal of erythromycin, sulfamethoxazole, and tetracycline. Furthermore, WHRB modified the biodegradation network, increased the relative abundances of Chloroflexi, Proteobacteria and Nitrospirae and decreased Firmicutes, compared with the control with antibiotics. The addition of WHRB also enriched Actinobacteria and Bacteroidetes while decreasing the phylla Chloroflexi and Saccharibacteria in the biofilm.

Effects of pharmaceuticals on membrane bioreactor: Review on membrane fouling mechanisms and fouling control strategies

Pharmaceuticals have become contaminants of emerging concern due to their toxicity towards aquatic life and pseudo persistent nature in the environment. Membrane bioreactor (MBR) is one such technology that has the potential to act as a barrier against the release of pharmaceuticals into the environment. Fouling is the deposition of the constituents of the mixed liquor on the membrane surface and it limit the world-wide applicability of MBRs. To remove foulant layer, aggressive chemicals and extra cost consideration in terms of energy are required. Extracellular polymeric substances (EPS) and soluble microbial products (SMP) are recognized as principal foulants. Presence of pharmaceuticals has been found to increase the fouling in MBRs. Fouling aggravates in proportion to the concentration of pharmaceuticals. Pharmaceuticals exert chemical stress in microbes, hence forcing them to secrete more EPS/SMP. Pharmaceuticals alter the composition of the foulants and affect microbial metabolism, thereby inflicting direct/indirect effects on fouling. Pharmaceuticals have been found to increase or decrease the size of sludge flocs, however the exact mechanism that govern the floc size change is yet to be understood. Different techniques such as coupling advanced oxidation processes with MBR, adding activated carbon, bioaugmenting MBR with quorum quenching strains have shown to reduce fouling in MBRs treating pharmaceutical wastewater. These fouling mitigation techniques work on reducing the EPS/SMP concentration, thereby alleviating fouling. The present review provides a comprehensive understanding of the effects induced by pharmaceuticals in the activated sludge characteristics and identifying the fouling mechanism. Furthermore, significant knowledge gaps and recent advances in fouling mitigation strategies are discussed. This review has also made an effort to highlight the positive aspect of the foulant layer in retaining pharmaceuticals and antibiotic resistance genes, thereby suggesting a possible delicate trade-off between the flux decline and enhanced removal of pharmaceuticals.

Evaluating the effect of microalga Haematococcus pluvialis bioaugmentation on aerobic membrane bioreactor in terms of performance, membrane fouling and microbial community structure

In this study, considering the enhancement potential of microalgae and MBRs for wastewater treatment, the microalgae Haematococcus pluvialis, which is a freshwater species of Chlorophyta with a high capacity to synthesize astaxanthin, was bioaugmented into an aerobic MBR to investigate its potential on treatment of antibiotics in wastewater, reducing membrane biofouling, and impact on the microbial community structure. For this purpose, two control MBRs, with and without antibiotics, alongside an MBR bioaugmented with H. pluvialis, were set under mesophilic conditions, using inoculum from a local wastewater treatment facility and synthetic wastewater. The common antibiotics sulfamethoxazole (SMX), tetracycline (TET) and erythromycin (ERY) were selected to investigate removal efficiencies by Haematococcus pluvialis in an MBR for this study. In the bioaugmented reactor, membrane biofouling was delayed by 33% and chemical oxygen demand removal increased by 6%. The highest removal of antibiotics was observed for TET with a 20% enhancement from 69.75% (C2) to 89.73% (HP). The results also suggested that H. pluvialis reconstructed indigenous and biofilm microbial communities in MBR. The biodegradation network was modified and the relative abundance of Proteobacteria increased, while Firmicutes and Bacteroidetes were significantly reduced.

Quorum quenching strategy for biofouling control in membrane photobioreactor

This study aims to reduce membrane fouling in membrane photobioreactor (MPBR) through the quorum quenching (QQ) strategy. For this purpose, the QQ beads (immobilized Rhodococcus sp. BH4) were added to the MPBR, and antifouling ability was evaluated in consideration of the changes in transmembrane pressure (TMP), extracellular polymeric substance (EPS), microbial community, and cake layer morphology on the membrane surface. The results showed that the TMP of control MPBR (MPBR-C) reached 818 mbar and 912 mbar on the operation hours of 35 and 170, while the TMP of experimental MPBR (MPBR-QQ) was only 448 mbar and 676 mbar, respectively. The QQ strategy effectively reduced the EPS content in MPBR. The microscopic observations indicated that the QQ diminished the cake layer formation and pore-blocking on the membrane surface. Comparisons of 16S and 18S gene communities revealed minor differences between bacterial and eukaryotic species in MPBRs at phylum and class levels.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Inhibition of AHL-mediated quorum sensing to control biofilm thickness in microbial fuel cell by using Rhodococcus sp. BH4

Anode biofilm thickness is a key point for high and sustainable power generation in microbial fuel cells (MFCs). Over time, the formation of a thicker biofilm on anode electrode hinders the power generation performance of MFC by causing a longer electron transfer path and the accumulation of undesirable components in anode biofilm. To overcome these limitations, we used a novel strategy named quorum quenching (QQ) for the first time in order to control the biofilm thickness on the anode surface by inactivation of signal molecules among microorganisms. For this purpose, the isolated QQ bacteria (Rhodococcus sp. BH4) were immobilized into alginate beads (20, 40, and 80 mg/10 ml sodium alginate) and added to the anode chamber of MFCs. The MFC exhibited the best electrochemical activity (1924 mW m^-2) with a biofilm thickness of 26 μm at 40 mg Rhodococcus sp. BH4/10 ml sodium alginate. The inhibition of signal molecules in anode chamber reduced the production of extracellular polymeric substance (EPS) by preventing microbial communication amonganode microorganisms. Microscopic observations revealed that anode biofilm thickness and the abundance of dead bacteria significantly decreased with an increase in Rhodococcus sp. BH4 concentration in MFCs. Microbiome diversity showed an apparent difference among the microbial community structures of anode biofilms in MFCs containing vacant and Rhodococcus sp. BH4 beads. The data revealed that the QQ strategy is an efficient application for improving MFC performance and may shed light on future studies.