A highly selective and sensitive ICT-based Cu2+ fluorescent probe and its application in bioimaging

A novel structurally modified isophorone fluorescent probe for H2S detection

Hydrogen sulfide (H2S) has a comprehensive contribution to the normal operation and stability of organisms and is also present in environmental water samples and food deterioration. Thus, it is exceedingly promising and significant to develop a highly sensitive detection technique for tracing H2S. Inspired by this, we designed and synthesized a new fluorescent probe 2-[3-[2-[3-bromo-4-(2,4- dinitrobenzenesulfonate)] ethenyl]-5,5-dimethyl-2-cyclohexen-1-ylidene]propanedinitrile (SP-Br) for hydrosulfide ion detection by introducing bromine atom. Compared with reported H2S probes based on the same fluorescent parent, SP-Br has longer fluorescence emission (λem = 670 nm), shorter response time (3 min), lower detection limit (149 nM), and wider detection range (0-30 nM). SP-Br can emit weak yellow fluorescence, and the emission intensity at 670 nm is considerably enhanced in the presence of hydrosulfide ions. The identification mechanism of hydrosulfide ion by SP-Br was verified by high-resolution mass spectrometry, fluorescence, and UV-vis absorption spectroscopy. In addition, SP-Br has been successfully applied to the monitoring of actual water samples and beer samples and has certain development prospects and value in the fields of environmental pollution and food quality analysis.

A multifunctional sensor for detecting tetracycline, 4-nitrophenol, and pesticides

In recent years, due to the abuse of antibiotics, nitro explosives and pesticides, which have caused great harm to the environment and human health, social concerns have prompted researchers to develop more sensitive detection platforms for these pollutants. In this paper, a novel two-dimensional Zn (II) coordination polymer, [Zn(L)0.5(1,2-bimb)]·DMF (1), [H4L=[1,1':4',1''-terphenyl]-2, 2'',4, 4'' -tetracarboxylic acid, 1,2-bimb = 1,2-bis(imidazol-1-ylmethyl)benzene] was synthesized using a hydro-solvothermal method. Among commonly used organic solvents, 1 exhibits significant stability. Fast and efficient fluorescence response can be achieved for tetracycline (TET), 4-nitrophenol (4-NP), fluazinam (FLU), and abamectin benzoate (AMB) with low detection limits. A binary intelligent logic gate device with FLU and AMB as chemical input signals is successfully constructed, which provides a new idea for biochemical detection. In addition, a portable visual test paper has been prepared, which has high sensitivity, good selectivity, and simple operation. It can be used for rapid detection of pollutants in daily life and has broad application prospects. Finally, a detailed discussion was conducted on the fluorescence sensing mechanism of 1 for detecting TET, 4-NP, AMB and FLU.

Nanozyme coating-gated multifunctional COF composite based dual-ratio enhanced dual-mode sensor for highly sensitive and reliable detection of organophosphorus pesticides in real samples

The reliable detection of organophosphorus pesticides (OPs) in complex matrices remains an enormous challenge due to inevitable interference of sample matrices and testing factors. To address this issue, we designed a nanozyme-coated mesoporous COF with guest molecule loading, and successfully used it to construct a dual-ratio dual-mode sensor through target-regulated signal generation. The multifunctional COF-based composite (MB/COF@MnO2, MCM) featured high loading of methylene blue (MB), oxidase-like MnO2 coatings as gatekeepers, and specific recognition of thiocholine (TCh). TCh, a regulator produced from acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylthiocholine, could decompose MnO2 coatings, triggering the release of abundant MB and oxidation of few o-phenylenediamine (OPD). OPs, strong inhibitors of AChE, could restrain TCh production and MnO2 decomposition, thereby controlling the release of less MB and oxidation of more OPD. This regulation boosted the dual-ratio dual-mode assay of OPs by using the released MB and oxidized OPD in the solution as testing signals, measured by both fluorescent and electrochemical methods. Experimental results demonstrated the sensitive detection of dichlorvos with LODs of 0.083 and 0.026 ng/mL via the fluorescent/electrochemical mode, respectively. This study represented a creative endeavor to develop dual-ratio dual-mode sensors for OPs detection in complex samples, offering high sensitivity, excellent selectivity, and good reliability.

A novel "Turn-Off-On" fluorescent probe for specific sequential detection of Cu2+ and glyphosate and its application in biological imaging

As common pollutants, Cu2+ and glyphosate pose a serious threat to human health and the ecosystem. Herein, a fluorescent probe (E)-7-(diethylamino)-N'(4-(diethylamino)-2-hydroxybenzyl)-2-oxo-2H chromophore-3-carbazide (DDHC) was designed and synthesised for the sequential recognition of Cu2+ and glyphosate. DDHC has the advantages of a short synthesis path, easy-to-obtain raw materials, good anti-interference ability, and strong stability. The interaction of the DDHC-Cu2+ complexes with glyphosate allows the amino and carboxyl groups in glyphosate molecules to coordinate with Cu2+ strongly, competing for the Cu2+ in the DDHC-Cu2+ complexes and releasing the DDHC, leading to the recovery of fluorescence. The recognition was further validated through Job's plot, HRMS, and DFT calculations. In addition, the successful recovery of Cu2+ and glyphosate in different environmental water samples fully demonstrates the practical application potential of DDHC. Especially, DDHC has low cytotoxicity and can enter zebrafish and HeLa cells, rapidly reacting with Cu2+ and glyphosate in the body, generating visible fluorescence quenching and recovery phenomena, achieving real-time visual monitoring of exogenous Cu2+ and glyphosate in zebrafish and HeLa cells. The targeting and dual selectivity of DDHC greatly enhance its potential application value in the field of detection, providing important theoretical support for studying the fate of multiple pollutants in the environment.

A novel coumarin-naphthalimide-based ratiometric fluorescent probe for efficiently monitoring of hydrazine in environmental water

A novel coumarin-naphthalimide-based ratiometric fluorescent probe, called XPT, was synthesized with the aim of achieving high sensitivity and anti-interference for N2H4 detection. The probe XPT consists of coumarin species and naphthalimide species, which act as the energy donor and acceptor, respectively. The phthalimide group functions as the recognition unit for N2H4. Without the presence of hydrazine, the naphthalimide remains in a non-fluorogenic phthalimide mode, disrupting the FRET signal. However, the phthalimide group undergoes the Gabriel reaction to an amine, which induces FRET and consequently causes a shift in the emitted fluorescence from 468 to 528 nm when N2H4 was added. The results of the study demonstrated that XPT exhibits high sensitivity with a limit of detection 2.2 μM, as well as selectivity. Furthermore, it is remarkable that the distribution of N2H4 in real water samples can be monitored by XPT.

A Terbium Ion-Based Dual-Ligand Fluorescent Probe for Highly Selective and Sensitive Detection of Cu2+ Ions

In this study, a fluorescent probe (GMP-Tb-SSA) utilizing lanthanide coordination polymer nanoparticles, GMP-Tb, as a sensing platform, and 5-sulfosalicylic acid (SSA) as a cofactor ligand was proposed for the detection of copper ions (Cu2+). GMP-Tb was synthesized by the self-assembly of guanine monophosphate (GMP) and terbium ion (Tb3+), and SSA was introduced as a sensitizer into the GMP-Tb network. Cu2+ could efficiently inhibit the electron transfer from the ligand GMP to the central ion, Tb3+, leading to a significant quench of fluorescence of Tb3+. The method is highly selective with a linear range of 0 to 21 µM and a detection limit of 300 nM. It is not interfered by metal ions, amino acids, and other species, and can be successfully applied to the detection of Cu2+ in real water samples.

Effect of oxidative stress induced by 2,3,7,8- tetrachlorodibenzo-p-dioxin on DNA damage

2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) is a highly toxic persistent organic pollutant (POP) that can induce DNA damage within cells. Although oxidative stress is one of the primary mechanisms causing DNA damage, its role in the process of TCDD-induced DNA damage remains unclear. In this study, the TCDD-induced production of reactive oxygen species (ROS) and the occurrence of DNA damage at the AP site were monitored simultaneously. Further investigation revealed that TCDD impaired the activities of superoxide dismutase (SOD) and catalase (CAT), compromising the cellular antioxidant defense system. Consequently, this led to an increase in the production of O2.- and NO, thus inducing DNA damage at the AP site under oxidative stress. Our findings were further substantiated by the upregulation of key genes in the base excision repair (BER) pathway and the absence of DNA AP site damage after inhibiting O2.- and NO. In addition, transcriptome sequencing revealed that TCDD induces DNA damage by upregulating genes associated with oxidative stress in the mitogen-activated protein kinase (MAPK), cyclic adenosine monophosphate (cAMP), and breast cancer pathways. This study provides important insights into the toxicity mechanisms of TCDD.

A novel Zn2+-coordination fluorescence probe for sensing HPPD inhibitors and its application in environmental media and biological imaging

Mesotrione, topramezone, tembotrione, and sulcotrione are four types of 4-hydroxyphenylpyruvate dioxidase (HPPD) inhibitor herbicides that are extensively employed in agricultural practices, but their usage also leads to environmental pollution and poses risks to human health. A probe (E)-1-((2-(pyridin-2-yl) hydrazineylidene) methyl) naphthalen-2-ol (CHMN) based on chelation enhancement (CHEF) effect synthesized. CHMN was first chelated with Zn2+ to form a probe system with green, which can be further used to detect mesotrione, topramezone, tembotrione and sulcotrione in complicated environment. CHMN-Zn2+ detection of four pesticides was accurate, with an excellent linear relationship between 0 and 100 μM. The detection limits were LODmesotrione = 7.79 μM, LODtopramezone = 1.91 μM, LODtembotrione = 1.38 μM and LODsulcotrione = 2.43 μM. The detection time is 1 min, and it is successfully applied in real water sample and bioimaging. This work can provide a novel method for studying the migration and behavior of environmental pollutants.

Preparation of a capsaicinoids broad spectrum antibody and its application in non-enzyme immunoassay based on DMSNs@PDA@Pt

Capsaicinoids (CPCs) is a special ingredient with pungent smell in condiments, which can also be used as an exogenetic marker for kitchen waste oil. Development of immunoassay for CPCs remains a challenging due to relatively difficult preparation of the broad-spectrum antibody (Ab). In this work, a broad-spectrum polyclonal antibody (pAb) which can simultaneously recognize capsaicin (CPC), dihydrocapsaicin (DCPC), nordihydrocapsaicin (NDCPC), and N-vanillylnonanamide (N-V) is produced, and a non-enzyme immunoassay (NISA) based on this Ab, dendritic mesoporous silica nanomaterials (DMSNs), polydopamine (PDA), and high catalytic efficiency of Pt nanoparticles to prepare signal probe (DMSNs@PDA@Pt) is established. Here, the limit of detection (LOD) of NISA for CPC is as low as 0.04 μg L-1. It is worth mentioning that the LOD of the proposed NISA is at least 23 times lower than that of traditional enzyme-linked immunosorbent assay (ELISA) based on horseradish peroxidase (HRP). Moreover, the proposed NISA is applied to detect CPCs in edible oil samples, the result has good consistency with that of ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The proposed NISA based on DMSN@PDA@Pt and broad-spectrum Ab is an ideal tool for highly effective screening CPCs for kitchen waste oil abuse surveillance.

Thin colorimetric film array for rapid and selective detection of v-type nerve agent mimic in potentially contaminated areas

The expeditious detection and quantification of V-series nerve agents (VX) on potentially contaminated surfaces are crucial for the prevention of regional conflict incidents, acts of terrorism, or illicit activities. However, the low volatility and high toxicity of VX make these tasks challenging. Herein, we designed two novel colorimetric thin polymeric films to rapidly and sensitively detect demeton-S, a VX mimic, in contaminated areas. The polymeric films were specifically engineered to include a coordination site for Au (III) ions. Initially, these films were coordinated with Au (III), causing a discernible alteration in color due to enhancement in intramolecular charge transfer process. In the presence of demeton-S, the Au (III) ligands in the films are displaced with demeton-S, resulting in the restoration of the original color of the film, as the enhanced intramolecular charge transfer process is inhibited and thereby serving as an indicator of the presence of demeton-S. The polymeric films exhibit remarkable selectivity toward demeton-S compared to G-type nerve agents and other interference. The reusability of the polymeric films for demeton-S detection was achieved owing to the reversibility of the films during the alternative exposure of Au (III) and demeton-S. The polymeric films demonstrated their applicability for demeton-S detection and quantification in several contaminated areas, including different water, soil, and skin, rendering them highly suitable for on-site measurements.

Engineering a "turn-on" NIR fluorescent sensor-based hydroxyphenyl benzothiazole with a cinnamoyl unit for hydrazine and its environmental and in-vitro applications

Hydrazine (N2H4), a chemical compound widely used in various industrial applications, causes significant environmental and biological hazards. Therefore, it is crucial to develop methodologies for the visualization and real time tracking of N2H4. In this regard, we have constructed a novel near-infrared fluorescent probe (HBT-Cy) that can effectively detect N2H4 in various samples. HBT-Cy contains 2-(2'-hydroxyphenyl)benzothiazole (HBT), cinnamoyl (Cy), and pyridinium (Py) moieties. Importantly, HBT-Cy exhibits a rapid, selective, and highly sensitive response to N2H4. This response results in the release of HBT-Py and the generation of considerable colorimetric changes along with a significant NIR (near infrared) fluorescence signal, peaking at 685 nm. Advantages of this system include turn on NIR fluorescence with large Stokes shift, (approximately 171 nm), low limit of detection (LOD = 0.11 μM) and quantum yield (0.211). The probe with low cytotoxic behavior demonstrates strong NIR fluorescence imaging capabilities to visualize endogenous and exogenous N2H4 in live cells. This mitochondria-targetable probe shows effective subcellular localization. These results suggest that HBT-Cy is a valuable probe for tracking and investigating the behavior of N2H4 in biological systems and environmental samples.

Myricetin-based fluorescence probes with AIE and ESIPT properties for detection of hydrazine in the environment and fingerprinting

BACKGROUND

Hydrazine (N2H4) is a highly toxic and versatile chemical raw material, which poses a serious threat to the environment and human health when used in large quantities. However, the traditional methods for the detection of N2H4 have the disadvantages of time-consuming, complicated operation and expensive instruments. In contrast, fluorescence probes have many advantages, such as simple operation, high sensitivity, good selectivity, and fast response time. Therefore, there is an urgent need for a fluorescence probe that can rapidly and accurately detect the presence of N2H4 and monitor the changes in its concentration.

RESULTS

For this purpose, we designed and synthesized a series of myricetin fluorescence probes 3-(substituent group)-5,7-dimethoxy-4-oxo-2-(3,4,5-trimethoxy. phenyl)-4H-chromen-4-one (Myr-R) for N2H4 detection. In the presence of N2H4, the probe 5,7-dimethoxy-3-(2,3,4,5,6-pentafluorobenzoate)-2-(3,4,5-trimethoxyphen-yl). -4H-chr-omen-4-one (Myr-3) shows significant fluorescence changes, double emission properties and a large Stokes shift (183 nm), and exhibits high selectivity and sensitivity to N2H4 (The detection limit is 93 nM). Importantly, the qualitative and quantitative analysis of N2H4 in water, soil, and air can be accomplished using fluorescence, smartphone, and UV lamps coupled with Myr-3. In addition, Myr-3 can be used for monitoring and imaging intracellular N2H4. Meanwhile, the fluorophore 3-hydroxy-5,7-dimethoxy-2-(3,4,5-trimethoxyphenyl)-4H-benzopyran-4-one (Myr-Me) was applied to fingerprinting of different substrate materials due to the fact that it exhibits strong yellow fluorescence emission in the solid state and shows excellent contrast and high resolution.

SIGNIFICANCE

The probe Myr-3 is not only able to rapidly detect N2H4 in complex environments, but also can be used for imaging intracellular N2H4. In addition, the fluorophore Myr-Me can be used as an effective imaging agent for visual fingerprinting. These properties enable the probe Myr-3 and the fluorophore Myr-Me for a wide range of potential applications in related fields.

ICT-based fluorescent probes for intracellular pH and biological species detection

Fluorescent probes, typically based on the intramolecular charge transfer (ICT) mechanism, have received considerable research attention in cell detection due to their non-invasiveness, fast response, easy regulation, high sensitivity, and low damage tolerance for in vivo bio-samples. Generally, intracellular pH and biological species such as various gases, metal ions, and anions constitute the foundation of cells and participate in the basic physiological processes, whose abnormal level can lead to poisoning, cardiovascular disease, and cancer in living organisms. Therefore, monitoring of their quantity plays an essential role in understanding the status of organisms and preventing, diagnosing, and treating diseases. In the last decades, remarkable progress has been made in developing ICT probes for the detection of biological elements. In this review, we highlight the recent ICT probes focusing primarily on the detection of intracellular pH, various gases (H2S, CO, H2O2, and NO), metal ions (Cu2+, Hg2+, Pb2+, Zn2+, and Al3+), and anions (ClO-, CN-, SO3 2-, and F-). In addition, we discuss the issues and limitations of ICT-based fluorescent probes for in vivo detection and explore the clinical translational potential and challenges of these materials, providing valuable guidance and insights for the design of fluorescent materials.