A comprehensive review on the boosted effects of anion vacancy in the heterogeneous photocatalytic degradation, part I: Focus on sulfur, nitrogen, carbon, and halogen vacancies

Investigation of Doehlert matrix conception in novel intrinsically conducting polymers based on selenium nanoparticles for wastewater treatment: Synthesis, characterization, kinetic and chemometric study

The synthesis of robust intrinsically conducting polymers (ICPs) based on nanoparticles is becoming increasingly attractive to the research community due to the unique properties of these nanocomposites. Indeed, as organic semiconductors, ICPs combine both polymer and metal properties in a single structure. This study presents an innovative approach in which the Doehlert Matrix (DM) is applied to a novel ICP nanocomposite based on polyaniline (Pani) coupled with selenium (Se) loaded mesoporous titania (TiO2) for wastewater treatment by photocatalysis. It includes both the elaboration routes of ICP nanocomposites, characterization of materials by X-ray diffraction (XRD), BET analysis, thermogravimetric analysis (TGA), RAMAN spectroscopy and Fourier transform infrared spectroscopy (FTIR) and photodegradation of methylene blue (MB) as a representative of dye pollutant. In addition, the photocatalytic process has been optimized by a novel DM conception. The effect of the pH of the solution, the catalyst dosage and the initial pollutant concentration was investigated. The optimum conditions were found to be: initial MB concentration of 15 mg/L, the catalyst dosage of 69 mg and pH of 9.6 with an operating time of 75 min, with a coefficient of determination R2 equal to 0.9985. The removal efficiency of BM was close to 97 %. The study shows that the new ICP nanocomposites improve the photocatalytic efficiency compared to pure titania and/or pure Pani. In addition, as the ternary Pani-Se-TiO2 nanocomposite could be obtained from a low-cost synthesis, it is a very promising material for use in wastewater treatment.

Designing ultrathin Fe doped Ta2O5-x nanobelts for highly enhanced ammonia photosynthesis

Solar-light photosynthesis of ammonia form N2 reduction in ultrapure water over the artificial photocatalysts is attractive but still challenging compared with Haber-Bosch process. In this work, ultrathin Fe-Ta2O5-x nanobelts were fabricated via the controllable solvothermal process for ammonia photosynthesis. The formed oxygen vacancies and Fe doping narrowed their bandgap energies and promoted the carriers' separation and transfer for Fe-Ta2O5-x nanobelts. In addition, Fe doping also resulted in the reduced working functions of the samples, indicating a weaker electron binding restriction and stronger separation and transfer of photo-induced carriers. The experimental results showed that Fe-Ta2O5-x nanobelts showed remarkably enhanced photocatalytic ammonia production performance under simulated sunlight irradiation, and the relevant ammonia production rate reached approximately 3030.86 μM g-1 h-1, which was 9.63 times of pristine Ta2O5-x and 491.0 times of commercial Ta2O5, and a relatively stable photocatalytic ammonia production performance under simulated sunlight irradiation for Fe-Ta2O5-x nanobelts. Meanwhile, it was also found that Fe doping has great influences on the photocatalytic performance under visible light and simulated sunlight irradiation, mainly because of their suitable bandgap energies and enhanced solar-light harvesting capacity. Current work indicates the great potentials of ultrathin tantalum-based functional materials for high-efficiency ammonia photosynthesis.

Bimetallic Ag/Fe-MOG derived flake-like Ag2O/Fe2O3 p-n heterojunction for efficient photodegradation organic pollutants within a wide pH range

In this paper, we reported a facile and clean strategy to prepare the flake-like Ag2O/Fe2O3 bimetallic p-n heterojunction composites for photodegradation organic pollutants. The surface morphology, crystal structure, chemical composition and optical properties of Ag2O/Fe2O3 were characterized by SEM, high-resolution TEM images with EDX spectra, XRD, XPS, FT-IR and UV-vis DRS spectra respectively. The formation of Ag2O/Fe2O3 p-n heterojunction facilitated the interfacial transfer of electrons as well as the separation of charge carries. Hence, the as-synthesized Ag2O/Fe2O3-3 composites exhibited ultra-high photocatalytic activity. Under the experimental conditions of catalyst dosage of 0.4 mg mL-1 and irradiation time of 60 min, the degradation conversion rate of rhodamine B reached 96.1 %, which was 5.0 and 2.8 times of pure phase Ag2O and Fe2O3, respectively. Meanwhile, the degradation performance of Ag2O/Fe2O3-3 was not limited by pH, and it can achieve high degradation efficiency under 3-11. In addition, Ag2O/Fe2O3-3 also showed superb degradation ability for other common anionic dyes, cationic dyes and antibiotics. XPS and FT-IR spectra showed that Ag2O/Fe2O3-3 retained a carbon skeleton that facilitated electron transport and light absorption conversion. And the analyses of quenching experiment and EPR demonstrated •O2-, •OH and h+ were crucial reactive oxidant species contributing to the rapid organic pollutant degradation. This work provides new insights into obtaining p-n photocatalysts heterojunction with excellent catalytic activity for removing organic pollutants from wastewater.

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

The progress of research on vacancies in HMF electrooxidation

5-Hydroxymethylfurfural (HMF), serving as a versatile platform compound bridging biomass resource and the fine chemicals industry, holds significant importance in biomass conversion processes. The electrooxidation of HMF plays a crucial role in yielding the valuable product (2,5-furandicarboxylic acid), which finds important applications in antimicrobial agents, pharmaceutical intermediates, polyester synthesis, and so on. Defect engineering stands as one of the most effective strategies for precisely synthesizing electrocatalytic materials, which could tune the electronic structure and coordination environment, and further altering the adsorption energy of HMF intermediate species, consequently increasing the kinetics of HMF electrooxidation. Thereinto, the most routine and effective defect are the anionic vacancies and cationic vacancies. In this concise review, the catalytic reaction mechanism for selective HMF oxidation is first elucidated, with a focus on the synthesis strategies involving both anionic and cationic vacancies. Recent advancements in various catalytic oxidation systems for HMF are summarized and synthesized from this perspective. Finally, the future research prospects for selective HMF oxidation are discussed.

Photocatalytic degradation of Acid Red 18 by synthesized AgCoFe2O4@Ch/AC: Recyclable, environmentally friendly, chemically stable, and cost-effective magnetic nano hybrid catalyst

Chitosan (Ch) is a linear biodegradable natural carbohydrate polymer and the most appealing biopolymer, such as low-cost biodegradability, biocompatibility, hydrophilicity, and non-toxicity. In this case, Ch was utilized to synthesize AgCoFe2O4@Ch/Activated Carbon (AC) by the modified microwave-assisted co-precipitation method. The physical and chemical structure of magnetic nanocomposites was analyzed and characterized by Field Emission Scanning Electron Microscope (FESEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Energy Dispersive Spectroscopy (EDS), Diffuse Reflection Spectroscopy (DRS), Value stream mapping (VSM), Fourier transform spectroscopy (FTIR) and BET. The effects of various parameters on the removal of dye (Acid Red18), including catalyst dose, dye concentration, pH, and time were studied. Results showed that the highest removal efficiencies were 96.68 % and 84 % for the synthetic sample and actual wastewater, respectively, in optimal conditions (pH: 3, the initial dye concentration: 10 mgL-1, the catalyst dose: 0.14 gL-1, time: 50 min). Mineralization, according to the COD analysis, was 89.56 %. Photocatalytic degradation kinetics of Acid Red 18 followed pseudo-first order and Langmuir-Hinshelwood with constants of kc = 0.12 mg L-1 min-1 and KL-H = 0.115 Lmg-1. Synthesized photocatalytic AgCoFe2O4@Ch/AC showed high stability and after five recycling cycles was able to remove the pollutant with an efficiency of 85.6 %. So, the synthesized heterogenous magnetic nanocatalyst AgCoFe2O4@Ch/AC was easily recycled from aqueous solutions and it can be used in the removal of dyes from industries with high efficiency.

Constructing a Z-Scheme Co3O4/BiOBr Heterojunction to Enhance Photocatalytic Peroxydisulfate Oxidation of High-Concentration Rhodamine B: Mechanism, Degradation Pathways, and Toxicological Evaluations

Photocatalytic coupling technologies have emerged as popular strategies to increase the treatment efficiency of dye-containing wastewater. Herein, the Z-scheme Co3O4/BiOBr heterojunction (Z-CBH) was constructed and developed as a photocatalytic peroxydisulfate (PDS) activator for the degradation of high-concentration Rhodamine B (RhB). Multiple testing techniques were employed to confirm the formation of Z-CBHs. When 0.1 g·L-1 of Z-CBH20 and 1.0 mmol·L-1 of PDS were added simultaneously under simulated sunlight irradiation, the RhB degradation efficiency could approach 91.3%. Its reaction rate constant (0.01231 min-1) was much beyond the sum of those in the Z-CBH20/light system (0.00436 min-1) and the PDS/light system (0.0062 min-1). h+, •OH, •O2-, SO4•-, and 1O2 were detected as the dominant reactive species for RhB degradation. The potential mechanism of photocatalytic PDS oxidation was proposed. The possible intermediates were determined by high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry assisted with density functional theory and Fukui theory. The possible degradation pathways of RhB degradation were put forward. The toxicological properties of RhB and its intermediates were evaluated by quantitative structure-activity relationship prediction. This work will not only provide a reference for developing photocatalytic persulfate activators but also gain an insight into the degradation pathways of RhB and the toxicity of its intermediates.

Synergistic photocatalytic effect of α-Fe2O3-ZnO binary nanocatalyst toward methylene blue: An experimental design study

Due to the potential ecosystem protection and management applications, searching for highly optimized semiconductor-based solar energy photocatalysts is still a significant challenge. Coupled α-Fe2O3-ZnO nanoparticles were prepared in situ and characterized by various identification techniques such as XRD, SEM-EDX, TEM, DRS, and FT-IR. Its pHpzc was about 8.1. The band gap energies of ZnO, α-Fe2O3, and the coupled α-Fe2O3-ZnO system were 3.22, 2.08, and 2.09 eV, respectively. The boosted photocatalytic activity of the coupled catalysts was designed via the RSM approach, and the optimal RSM conditions were pH 5, 25 min irradiation time, and 0.3 g/L of the α-Fe2O3-ZnO containing 75 % ZnO. The center point conditions' run included 0.5 g/L of the coupled catalyst containing 50 % ZnO, pH 7, and 22.5 min illumination time. The study on scavenger agents showed the highest role of hydroxyl radicals in MB photodegradation by the proposed catalyst.