Estimation of Solar Energy Potential for Islamabad, Pakistan

Assessing the reliability and degradation of 10-35 years field-aged PV modules

The objective of this study was to conduct a reliability analysis on photovoltaic (PV) modules from the oldest PV installation site in Pakistan. Four sets of modules; Type A & B (30 years old), Type C (10 years old), and Type D (35 years old) were identified for this analysis. It has been observed that modules have shown degradation after working for a good number of years in the field. Comparing with nameplate data (available for Type B & C only), a drop of 28.68% and 2.99 percentage points (pp) was observed in the output power (Pmax) and efficiency (Eff.) respectively for Type B, while a drop of 22.21% and 4.05 pp was observed in Pmax and Eff. respectively for Type C. A greater drop in I_SC and Pmax was observed in Type B, which is attributed to severe browning of EVA in them. While the greater drop in Pmax, in case of Type C, is attributed to the poor quality of materials used. Amongst the different defects observed, the junction box defects which include cracking and embrittlement, etc., and backsheet defects which include discoloration, delamination and cracking, etc. were found in all four types of modules. Other defects include browning of EVA, observed in Type B and D, and corrosion of frame and electrical wires, found in Type A, B, and D. This first-ever study will provide valuable information in understanding the degradation mechanism and henceforth, improving the long term reliability of PV modules in the humid-subtropical conditions of Pakistan.

Wind speed pattern data and wind energy potential in Pakistan: current status, challenging platforms and innovative prospects

Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand, depletion of fossil fuels and environmental concerns, many developing and developed countries are moving towards alternative renewable resources such as solar energy, wind energy and biomass. Wind energy as a renewable energy source is gaining a lot of significant attention. Wind energy is a sustainable solution to produce energy having potential benefits such as clean source, reduced toxic gases emission and environmental friendly protocol for operation. Pakistan is among the top countries facing the worst energy crisis due to different political and financial issues. Pakistan is blessed with a huge potential of wind energy having all the basic requirements such as windy regions and good wind speed for harnessing energy. Pakistan can utilize the potential of wind energy to reduce the problem of energy outrage in the country and also take steps towards green economy from conventional fuel economy. This critical review highlights the current status, potential and the steps taken in the past and present to overcome the energy shortage in Pakistan by employing wind energy. Outlook on wind speed data, deployment of wind energy, environmental effect of wind energy and its barriers in the adoption are discussed with recommendations and suggestions to utilize this clean energy in an effective way. Graphical abstract.

The Role of Single End-Users and Producers on GHG Mitigation in Pakistan—A Case Study

End energy user is dependent on fossil fuel-based main-grid and contributes toward greenhouse gasses (GHG) emissions. Changing its energy source will change the dynamics of the power plant, contribution towards GHG production. This case study aims to highlight the minute but positive role of a single end energy user, invisible to the main grid in GHG mitigations through photovoltaic energy source, selected among Pakistan’s top 10 most populous cities as per census 2017. Quetta is a selected city in Pakistan as the best fit location based on annual average daily solar radiations (AADSR) data retrieved from National Aeronautics and Space Administration (NASA) meteorological data. Helioscope software is used to select −15° tilt and 180° azimuthal angles, which further increased Quetta’s AADSR value from 5.54 kWh/m2/d to 5.93 kWh/m2/d. For research significance, a realistic approach is undertaken by proper selection of solar panel type based on Quetta’s annual average temperature, load categorization, user selection and inputs from a solar energy expert. Finally, initial cost, investment and GHG mitigation analysis are carried out in RETScreen Expert software, which validates the minute but the prominent role of a single, end energy user by mitigating 122 tons of CO2 in 25-year project life span. Further, the proposed project favors end-user financially by recovering its $4501 initial cost in less than four years by effectively meeting its energy demand and saving $1195 per annum.

Smart agriculture through using cost-effective and high-efficiency solar drying

Background

Challenges must be handled in an integrated manner when addressing food security and climate change. More efficient designs for food production systems, as well as their logistics, are needed in order to increase food production and to reduce emissions intensity. Specifically, any enhancements done on this purpose would contribute to mitigating climate change. Five important dimensions are being considered in smart agriculture: food security, availability, accessibility, utilization, and stability.

Scope and approach

Food supply-demand chain can seriously be effected by uncontrolled population growth. Thus, any perspective to solve these uncontrolled conditions can have a positive impact. Especially giving emphasis on reduction of food losses via expoloring various ways of production, or increasing productivity, or ensuring food security are effective ways for solutions. For example, the use of solar drying for agricultural, marine or meat products is very important for preservation, thus minimizing food losses. However, traditional sun drying is a relatively slow process. Also, the product quality worsens due to several factors: microorganism growth, enzymatic reactions, insect infestations. It is known that utilizing solar energy involves several factors that need attention. Thus, a lot of effort is directed toward improving solar energy technology for drying processes.

Key findings and conclusion

This study presents a smart agriculture design for drying using low cost and highly-efficient solar selective absorber. The system is based on an air heating flat plate solar absorber. Levelized cost of heat (LCOH) for the prototype using solar renewable energy is calculated and compared with the fossil fuel energy sources; natural gas, electricity, and liquified petroleum gas (LPG). In addition; a comparison of the costs for air collectors using various selective absorbers; unglazed or glazed, is presented. It is shown that solar energy, in the long run, will be more advantageous compared to fossil fuels.