Characterization and properties of the biosurfactant produced by Candida lipolytica UCP 0988

Production, characterization, and potential applications of lipopeptides in food systems: A comprehensive review

Lipopeptides are a class of lipid-peptide-conjugated compounds with differing structural features. This structural diversity is responsible for their diverse range of biological properties, including antimicrobial, antioxidant, and anti-inflammatory activities. Lipopeptides have been attracting the attention of food scientists due to their potential as food additives and preservatives. This review provides a comprehensive overview of lipopeptides, their production, structural characteristics, and functional properties. First, the classes, chemical features, structure-activity relationships, and sources of lipopeptides are summarized. Then, the gene expression and biosynthesis of lipopeptides in microbial cell factories and strategies to optimize lipopeptide production are discussed. In addition, the main methods of purification and characterization of lipopeptides have been described. Finally, some biological activities of the lipopeptides, especially those relevant to food systems along with their mechanism of action, are critically examined.

Co-production of lipases and biosurfactants by Bacillus methylotrophicus in solid-state fermentation

The production of biosurfactants and lipases through solid-state fermentation (SSF) processes remains relatively unexplored, especially in bacterial applications. The use of solid matrices, eliminating the need for precipitation and recovery processes, holds significant potential for facilitating bioremediation. This study aimed to simultaneously produce biocompounds via SSF using Bacillus methylotrophicus and employ the fermented substrate for remediating soil contaminated with 20% biodiesel. Initial efforts focused on determining optimal conditions for concurrent lipase and biosurfactant production during an 8-day fermentation period. The selected conditions, including a substrate mix of wheat bran and corn cob (80/20), 75% moisture, 1% glycerol inducer, 2% nitrogen, and 1% sugarcane molasses, resulted in a 24.61% reduction in surface tension and lipase activity of 3.54 ± 1.20 U. Subsequently, a 90-day bioremediation of clayey soil contaminated with biodiesel showcased notable biodegradation, reaching 72.08 ± 0.36% within the initial 60 days. The incorporation of biocompounds, biostimulation, and bioaugmentation (Test E2) contributed to this efficacy. The use of the fermented substrate as a biostimulant and bioaugmentation agent facilitated in situ biocompound production in the soil, leading to a 23.97% reduction in surface tension and lipase production of 1.52 ± 0.19 U.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03910-7.

Adsorption Efficiency of Carbon Materials for the Removal of Organic Pollutants: DDT from Aqueous Solution

Carbon nanotubes (CNTs) are widely used to adsorb organic pollutants from wastewater due to their porous structure, large specific surface area, and unique physical and chemical properties. Examining the interactions between pollutant molecules and carbon nanotubes is an important topic in the applications of nanotubes for the removal of pollutants. In this study, molecular dynamics (MD) and metadynamics simulations were used to investigate the adsorption mechanism of Dichlorodiphenyltrichloroethane (DDT) pollutants on carbon nanotubes. Obtained results revealed that functionalized CNTs (f-CNTs) with active groups exhibited significantly enhanced performance compared to pristine CNTs. The adsorption isotherms were analyzed at different DDT concentrations, and it was found that increasing the concentration of DDT molecules led to a decrease in system energy and increased stability. The presence of biosurfactants as functional groups on the CNTs enhanced the interaction between DDT molecules and the nanotubes. In CNT, the addition of DDT increases the van der Waals energy from -176.83 kJ/mol for 3 DDT molecules to -2237.88 kJ/mol for 50 DDT molecules. In the case of f-CNT, the van der Waals energy in the system with 50 DDT molecules is about 2061.05 kJ/mol more negative than the system with 3 DDT molecules. The number of contacts between the adsorbent and DDT molecules increased over time, indicating increased adsorption interaction. The radial distribution functions (RDF) of DDT molecules around CNTs and f-CNTs showed the highest probability of finding DDT molecules at a distance of about 0.5 nm from the adsorbent surface. The study provided valuable insights into the adsorption process and can guide future experimental studies.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

Statistical Optimization of Biosurfactant Production from Aspergillus niger SA1 Fermentation Process and Mathematical Modeling

In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E24) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35°C, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E24 (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and μmax (0.0306) for biosurfactant yield was Yp/s (1.87) and Yp/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

Biosurfactant: an emerging tool for the petroleum industries

The petroleum sector is essential to supplying the world's energy demand, but it also involves numerous environmental problems, such as soil pollution and oil spills. The review explores biosurfactants' potential as a new tool for the petroleum sector. Comparing biosurfactants to their chemical equivalents reveals several advantages. They are ecologically sustainable solutions since they are renewable, nontoxic, and biodegradable. Biosurfactants are used in a variety of ways in the petroleum sector. They can improve the mobilization and extraction of trapped hydrocarbons during oil recovery procedures. By encouraging the dispersion and solubilization of hydrocarbons, biosurfactants also assist in the cleanup of oil spills and polluted locations by accelerating their breakdown by local microorganisms. The review gives insights into alternative methods for the petroleum industry that are more viable and cost-effective.

Biosurfactant from Candida: sources, classification, and emerging applications

Biosurfactants are surface-active molecules that are synthesized by many microorganisms like fungi, bacteria, and yeast. These molecules are amphiphilic in nature, possessing emulsifying ability, detergency, foaming, and surface-activity like characteristics. Yeast species belongs to the genus Candida has gained globally enormous interest because of the diverse properties of biosurfactants produced by theme. In contrast to synthetic surfactants, biosurfactants are claimed to be biodegradable and non-toxic which labels them as a potent industrial compound. Biosurfactants produced by this genus are reported to possess certain biological activities, such as anticancer and antiviral activities. They also have potential industrial applications in bioremediation, oil recovery, agricultural, pharmaceutical, biomedical, food, and cosmetic industries. Various species of Candida have been recognized as biosurfactant producers, including Candida petrophilum, Candida bogoriensis, Candida antarctica, Candida lipolytica, Candida albicans, Candida batistae, Candida albicans, Candida sphaerica, etc. These species produce various forms of biosurfactants, such as glycolipids, lipopeptides, fatty acids, and polymeric biosurfactants, which are distinct according to their molecular weights. Herein, we provide a detailed overview of various types of biosurfactants produced by Candida sp., process optimization for better production, and the latest updates on the applications of these biosurfactants.

Bioremediation of Wastewater Using Yeast Strains: An Assessment of Contaminant Removal Efficiency

The main goal of wastewater treatment is to significantly reduce organic compounds, micronutrients (nitrogen and phosphorus) and heavy metals and other contaminants (pathogens, pharmaceuticals and industrial chemicals). In this work, the efficiency of removing different contaminants (COD, NO₃^-, NO₂^-, NH₄⁺, PO₄^3-, SO₄^2-, Pb²⁺, Cd²⁺) from synthetic wastewater was tested using five different yeast strains: Kluyveromyces marxianus CMGBP16 (P1), Saccharomyces cerevisiae S228C (P2), Saccharomyces cerevisiae CM6B70 (P3), Saccharomyces cerevisiae CMGB234 (P4) and Pichia anomala CMGB88 (P5). The results showed a removal efficiency of up to 70% of COD, 97% of nitrate, 80% of nitrite, 93% of phosphate and 70% of sulfate ions for synthetic wastewater contaminated with Pb²⁺ (43 mg/L) and Cd²⁺ ions (39 mg/L). In contrast, the results showed an increase in ammonium ions, especially in the presence of Pb²⁺ ions. The yeast strains showed a high capacity to reduce Pb²⁺ (up to 96%) and Cd²⁺ (up to 40%) ions compared to the initial concentrations. In presence of a crude biosurfactant, the removal efficiency increased up to 99% for Pb²⁺ and 56% for Cd²⁺ simultaneously with an increase in yeast biomass of up to 11 times. The results, which were obtained in the absence of aeration and in neutral pH conditions, proved a high potential for practical applications in the biotreatment of the wastewater and the recovery of Pb and Cd ions, with a high benefit-cost ratio.

Bacterial-derived surfactants: an update on general aspects and forthcoming applications

The search for sustainable alternatives to the production of chemicals using renewable substrates and natural processes has been widely encouraged. Microbial surfactants or biosurfactants are surface-active compounds synthesized by fungi, yeasts, and bacteria. Due to their great metabolic versatility, bacteria are the most traditional and well-known microbial surfactant producers, being Bacillus and Pseudomonas species their typical representatives. To be successfully applied in industry, surfactants need to maintain stability under the harsh environmental conditions present in manufacturing processes; thus, the prospection of biosurfactants derived from extremophiles is a promising strategy to the discovery of novel and useful molecules. Bacterial surfactants show interesting properties suitable for a range of applications in the oil industry, food, agriculture, pharmaceuticals, cosmetics, bioremediation, and more recently, nanotechnology. In addition, they can be synthesized using renewable resources as substrates, contributing to the circular economy and sustainability. The article presents a general and updated review of bacterial-derived biosurfactants, focusing on the potential of some groups that are still underexploited, as well as, recent trends and contributions of these versatile biomolecules to circular bioeconomy and nanotechnology.

Polycyclic aromatic hydrocarbons remobilization from contaminated porous media by (bio)surfactants washing

Biosurfactants, surface-active agents produced by microorganisms, are increasingly studied for their potential use in soil remediation processes because they are more environmentally friendly than their chemically produced homologues. In this work, we report on the use of a crude biosurfactant produced by a bacterial consortium isolated from a PAHs-contaminated soil, compared with other (bio)surfactants (Tween80, Sodium dodecyl sulfate - SDS, rhamnolipids mix), to wash PAHs from a contaminated porous media. Assays were done using columns filled with sand or sand-clay mixtures (95:5) spiked with four model PAHs. The crude biosurfactant showed less adsorption to the [sand] and the [sand + clay] columns compared to Tween 80, SDS and the rhamnolipid mix. The biosurfactant showed the second best capacity to remove PAHs from the columns (as dissolved and particulate phases), both from [sand] and [sand + clay], after SDS when applied at lower concentrations than the other sufactants. The effluent concentrations of phenanthrene (PHE), pyrene (PYR) and benzo[a]pyrene (BAP) increased in the presence of the crude biosurfactant. Compared to the control experiment using only water, the global PAHs washed mass (amount of PAHs removed from the columns) increased between 9 and 1000 times for PHE and BAP in the [sand] column, and between 55 and 6000 times respectively for PHE and BAP in the [sand + clay] columns. Moreover, in the [sand + clay] columns, leaching of a part of the clays was observed in the SDS and the biosurfactant injections assays. This clay leaching resulted in higher PAHs removal, due not to desorption but rather to particulate transport. In the context of washing PAH-contaminated soils in biopiles or subsurface remediation, our results could help in sizing the remediation approach using an environmental friendly biosurfactant, before a pump-and-treat process.

Cytotoxicity of di-rhamnolipids produced by Pseudomonas aeruginosa RA5 against human cancerous cell lines

Rhamnolipid biosurfactant produced by Pseudomonas aeruginosa, possesses non-toxicity, environmental compatibility, a wide range of pH (4-8), temperature (4-100 °C), and salinity (1-10%) stability. The application of RLs is worldwide accepted in the pharmaceutical, medicinal, and food industries. It has been used for cytotoxicity efficacy analysis with a limited number of cancerous cell lines. To widen the scope of rhamnolipid application as an anticancer agent, we have studied Di-RLs homolog, 'Rha-Rha-C10-C10' produced by Pseudomonas aeruginosa RA5 against human cancerous cell lines including breast cancer (MCF-7), leukemia (K-562), cervical cancer (HeLa), Lung cancer (HOP-62), and colon cancer (HT-29) in a dose-dependent way. It was purified with silica gel chromatography followed by TLC and mass spectroscopy prior to cytotoxicity analysis. With a tensiometer, critical micelle concentration of Di-RLs was estimated to be 33.92 ± 2 mN/m at 0.2%. Cytotoxicity analysis of Di-RLs on K-562 cell line demonstrated inhibition with GI50 and TGI at < 10 µg/mL and 66.6 µg/mL, after 48 h of application. The morphology of human cancerous cell lines was observed under a laser confocal microscope with the SRB staining method. Further research is recommended to comprehend the Di-RLs as a potential anti-cancer agent.

Molecular Identification and Biochemical Characterization of Novel Marine Yeast Strains with Potential Application in Industrial Biotechnology

Cell-based agriculture is an emerging and attractive alternative to produce various food ingredients. In this study, five strains of marine yeast were isolated, molecularly identified and biochemically characterized. Molecular identification was realized by sequencing the DNA ITS1 and D1/D2 region, and sequences were registered in GenBank as Yarrowia lipolytica YlTun15, Rhodotorula mucilaginosa RmTun15, Candida tenuis CtTun15, Debaryomyces hansenii DhTun2015 and Trichosporon asahii TaTun15. Yeasts showed protein content varying from 26% (YlTun15) to 40% (CtTun15 and DhTun2015), and essential amino acids ranging from 38.1 to 64.4% of the total AAs (CtTun15-YlTun15, respectively). Lipid content varied from 11.15 to 37.57% with substantial amount of PUFA (>12% in RmTun15). All species had low levels of Na (<0.15 mg/100 g) but are a good source of Ca and K. Yeast cytotoxic effect was investigated against human embryonic kidney cells (HEK 293); results showed improved cell viability with all added strains, indicating safety of the strains used. Based on thorough literature investigation and yeast composition, the five identified strains could be classified not only as oleaginous yeasts but also as single cell protein (SCP) (DhTun2015 and CtTun15) and single cell oil (SCO) (RmTun15, YlTun15 and TaTun15) producers; and therefore, they represent a source of alternative ingredients for food, feed and other sectors.

Biodegradation of Petroleum Hydrocarbons by Drechsleraspicifera Isolated from Contaminated Soil in Riyadh, Saudi Arabia

Currently, the bioremediation of petroleum hydrocarbons employs microbial biosurfactants because of their public acceptability, biological safety, and low cost. These organisms can degrade or detoxify organic-contaminated areas, such as marine ecosystems. The current study aimed to test the oil-biodegradation ability of the fungus Drechslera spicifera, which was isolated from contaminated soil samples in Riyadh, Saudi Arabia. We used hydrocarbon tolerance, scanning electron microscopy, DCPIP, drop-collapse, emulsification activity, recovery of biosurfactants, and germination assays to assess the biodegradation characteristics of the D. spicifera against kerosene, crude, diesel, used, and mixed oils. The results of DCPIP show that the highest oxidation (0.736 a.u.) was induced by crude oil on the 15th day. In contrast, kerosene and used oil had the highest measurements in emulsification activity and drop-collapse assays, respectively. Meanwhile, crude and used oils produced the highest amounts of biosurfactants through acid precipitation and solvent extraction assays. Furthermore, the biosurfactants stimulated the germination of tomato seeds by more than 50% compared to the control. These findings highlight the biodegradation ability of D. spicifera, which has been proven in the use of petroleum oils as the sole source of carbon. That might encourage further research to demonstrate its application in the cleaning of large, contaminated areas.

A review of the role of biosurfactants in the biodegradation of hydrophobic organopollutants: production, mode of action, biosynthesis and applications

The increasing influence of human activity and industrialization has adversely impacted the environment via pollution with organic contaminants, which are minimally soluble in water. These hydrophobic organopollutants may be present in sediment, water or biota and have created concern due to their toxic effects in mammals. The ability of microorganisms to degrade pollutants makes their use the most effective, inexpensive and ecofriendly method for environmental remediation. Microorganisms have the ability to produce natural surfactants (biosurfactants) that increase the bioavailability of hydrophobic organopollutants, which enables their use as carbon and energy sources. Due to microbial diversity in production, and the biodegradability, nontoxicity, stability and specific activity of the surfactants, the use of microbial surfactants has the potential to overcome problems associated with contamination by hydrophobic organopollutants.This review provides an overview of the current state of knowledge regarding microbial surfactant production, mode of action in the biodegradation of hydrophobic organopollutants and biosynthetic pathways as well as their applications using emergent strategy tools to remove organopollutants from the environment. It is also specified for the first time that biosurfactants are produced either as growth-associated products or secondary metabolites, and are produced in different amounts by a wide range of microorganisms.

Biocatalytic lipoprotein bioamphiphile induced treatment of recalcitrant hydrocarbons in petroleum refinery oil sludge through transposon technology

The present investigation employed transposon technology to enhance the degradation of recalcitrant petroleum hydrocarbons present in petroleum oil sludge by using biosurfactant hyper-producing strain Enterobacter xiangfangensis STP-3. Out of 2500 transposon induced mutants, mutants M_{257E.xiangfangensis} and M_{916E.xiangfangensis} hyper-produce biocatalytic lipoprotein biosurfactant by1.98 and 2.34 fold higher than wild-type strain. Transposon induced mutation also modified the amino acid composition which improved the hydrophobicity and thermal stability of the biosurfactants produced by mutants, compared to the wild-type biosurfactant. GC-MS and LC-MS-MS revealed that biosurfactants have pentameric lipid moiety and esterase as protein moiety. Increased biosurfactant hydrophobicity and yield by the mutants resulted in the enhanced bioavailability of petroleum hydrocarbons, thereby mutants M_{257E.xiangfangensis} and M_{916E.xiangfangensis} demonstrated better petroleum oil sludge degradation by 82% and 88% respectively, than wild-type (72%). Disrupted genes vgr G and pgm M in M257_{E.xiangfangensis} and M916_{E.xiangfangensis} respectively hyper-produce biosurfactant by competitive pathway inhibition and increased precursor availability mechanism. Hyper-production of biosurfactant was also validated by comparing the expression of biosynthetic genes ent E, ent F and est using qPCR. This is the first report on the application of transposon technology to hyper-produce biosurfactant for the effective bioremediation of hydrocarbon contaminated environments.

Characterization of a potent biosurfactant produced from Franconibacter sp. IITDAS19 and its application in enhanced oil recovery

Biosurfactants are surface-active molecules produced from microorganisms either on the cell surface or secreted extracellularly. Several biosurfactant producing microorganisms have been isolated to date, but they differ in their efficacy towards different types of hydrocarbons. Here, we report the isolation and characterization of a biosurfactant producing bacterium Franconibacter sp. IITDAS19 from crude oil contaminated soil. The biosurfactant was isolated, purified and characterized. It was identified as a glycolipid. It was found to be very stable at wide range of temperatures, pH and salt concentrations. It could reduce the surface tension of the water from 71 mN/m to 31 mN/m. IITDAS19 showed very high efficacy towards both aliphatic and aromatic hydrocarbons. It resulted in about 63% recovery of residual oil in a sand pack column. Our results suggested that the produced biosurfactant can be used for enhanced oil recovery. To our knowledge, this is the first report demonstrating the detailed characterization of a biosurfactant from Franconibacter spp.

Biosurfactant: A Next-Generation Tool for Sustainable Remediation of Organic Pollutants

Petroleum hydrocarbons are energy resources that majorly contribute pollutants to the environment. These pollutants may cause serious health issues, and hence, for the regulation of these contaminants, the development of sustainable alternative technologies has been considered, without causing further harm to the environment. One such alternative is biosurfactants (having low toxicity and being biodegradable) produced by numerous microbial species that have a tendency to remediate organic pollutants. Biosurfactants are amphiphilic compounds that are categorized into two types based on their molecular mass. Biosurfactants can be generated extracellularly or as a part of the cell membrane of microorganisms (bacteria, fungi, and algae). This review provides a detailed view of the types of biosurfactants, their properties, and the mechanism involved in the degradation of oil spills.

A Biosurfactant from Candida bombicola: Its Synthesis, Characterization, and its Application as a Food Emulsions

The present study aimed to produce a biosurfactant from Candida yeast cultivated in a low-cost medium made of sugar-cane molasses (5%), frying oil waste (5%), and corn steep liquor (5%). Initially, the production at the flask-scale was investigated and then scaled up in bioreactors to 1.2, 3.0, and 50 L to simulate a real production scale. The products obtained an excellent reduction in surface tensions from 70 to 29 mN·m⁻¹ in the flask-scale, comparable to 33 mN·m⁻¹ in the 1.2-L reactor, to 31 mN·m⁻¹ in the 3-L reactor, and to 30 mN·m⁻¹ in the 50-L reactor. Regarding the yield, it was observed that the isolation by liquid-to-liquid extraction aided biosurfactant production up to 221.9 g·L⁻¹ with a critical micellar concentration of 0.5%. The isolated biosurfactant did not exhibit an inhibitory effect on the germination of vegetable seeds and presented no significant acute toxicity in assays with Artemia salina and Allium cepa. Among the different formulations of mayonnaise-like sauces, the most stable formula was observed with the addition of the biosurfactant at a concentration of 0.5% and the greatest results were associated with the guar and carboxymethyl cellulose gums. Thus, the biosurfactant from C. bombicola represents a promising alternative as a food additive in emulsions.

Review on classification, physicochemical properties and applications of microbial surfactants

Biosurfactants are amphiphilic microbial compounds synthesized from plants and micro organisms that have both hydrophilic and hydrophobic zones, which are classified into liquid-liquid, liquid-solid and liquid-gas interfaces. Due to their versatile nature, low toxicity, and high reactivity at extreme temperatures, as well as – extremely important – their good biodegradability and environmental compatibility, biobased surfactants provide approaches for use in many environmental industries. Biosurfactants produced by microorganisms have potential applications in bioremediation as well as in the petroleum, agricultural, food, cosmetics and pharmaceutical industries. In this review article, we include a detailed overview of the knowledge obtained over the years, such as factors influencing bio-surfactant production and developments in the incorporation of biomolecules in different industries and future research needs.

Formulation and Study of an Environmentally Friendly Microemulsion-Based Drilling Fluid (O/W) with Pine Oil

This work has developed and evaluated a microemulsion-based drilling fluid formulation with characteristics to be applied in oil wells. The microemulsion was formulated with a solution of water/glycerol, pine oil, and Tween 80, a nonionic and biodegradable surfactant. The physical and chemical properties of the drilling fluid obtained in this work were investigated through rheology and filtration analysis, solids content, aging, lubricity, toxicity, and thermal degradation. A non-toxic microemulsion-based drilling fluid oil-in-water (O/W) with high lubricity (0.07638) and thermal stability was obtained with suitable viscosity, gel strength and low fluid loss (4.0 mL), low solids content (6%), stability in a wide range of salinity conditions, and the possibility of high water content (above 85% in mass fraction). The fluid presented a pseudoplastic behavior, and statistically significant Herschel–Bulkley parameters were obtained.

Surface properties and heavy metals chelation of lipopeptides biosurfactants produced from date flour by Bacillus subtilis ZNI5: optimized production for application in bioremediation

The present study summarizes the valorization of date flour by the production of lipopeptide biosurfactant (BioS) by Bacillus subtilis ZNI5 (MW091416). A Taguchi design permitted the formulation of a medium composed only of 6% date flour and 0.5% yeast extract within 2 days of incubation at 150 rpm with a maximal surface tension (ST) reduction of about 27.8 mN/m. The characterization of the lipopeptide shows a CMC value of about 400 mg/L with a minimal ST of 30 mN/m and an ability to disperse oil to about 80 mm at 800 mg/L. Having reduced phytotoxicity, the ZNI5 BioS and ZNI5 strain were assayed for Copper and Cobalt chelation and biosorption. The improvement of the germination index of radish seeds irrigated by the treated contaminated water showed the great potential application of ZNI5 lipopeptide in the bioremediation of heavy metals.

Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils

Heavy metal toxicity has become a pressing ecological problem that affects the ecosystems through bioaccumulation, representing a serious public health hazard. Many conventional strategies have been developed and applied to decontaminate and restore metal-contaminated areas. However, these conventional approaches are not very suitable and environmentally safe for heavy metal remediation because of their high operational costs, high energy requirements, post-waste disposal problems, and secondary pollutant generation. Thus, biosurfactant-based bioremediation of heavy metals is a sustainable and promising approach because of its biodegradation capability, economic effectiveness, and ecofriendly nature. Pseudomonas sp., Bacillus sp., Citrobacter freundii, and Candida tropicalis have been isolated as potential sources of biosurfactants and produce compounds such as surfactin, rhamnolipids, and sophorolipids. Owing to the severity of heavy metal pollution in certain parts of the environment, biosurfactants have garnered great interest and attention as an emerging multi-functional technology of the new century for successful removal of heavy metal pollutants. The present study describes the role of biosurfactants in the bioremediation of heavy metals from contaminated environments. Moreover, the interaction mechanism underlying biosurfactant-metal complexation and metal remediation are discussed. Based on the review of the literature, further research is warranted to elucidate the mechanistic roles and explore the structural characterization and gene regulation of biosurfactants to improve their productivity and expand their applicability in bioremediation.

Application of Green Surfactants in the Remediation of Soils Contaminated by Hydrocarbons

Among the innovative technologies utilized for the treatment of contaminated soils, the use of green surfactants appears to be a biocompatible, efficient, and attractive alternative, since the cleaning processes that normally use synthetic surfactants as additives cause other problems due to toxicity and the accumulation of by-products. Three green surfactants, i.e., two biobased (biobased 1 and biobased 2) surfactants produced by chemical synthesis and a microbial surfactant produced from the yeast Starmerella bombicola ATCC 22214, were used as soil remediation agents and compared to a synthetic surfactant (Tween 80). The three surfactants were tested for their ability to emulsify, disperse, and remove different hydrophobic contaminants. The biosurfactant, which was able to reduce the water surface tension to 32.30 mN/m at a critical micelle concentration of 0.65 g/L, was then used to prepare a commercial formulation that showed lower toxicity to the tested environmental bioindicators and lower dispersion capacity than the biobased surfactants. All the green surfactants showed great emulsification capacity, especially against motor oil and petroleum. Therefore, their potential to remove motor oil adsorbed on different types of soils (sandy, silty, and clay soil and beach sand) was investigated either in kinetic (flasks) or static (packed columns) experiments. The commercial biosurfactant formulation showed excellent effectiveness in removing motor oil, especially from contaminated sandy soil (80.0 ± 0.46%) and beach sand (65.0 ± 0.14%) under static conditions, while, in the kinetic experiments, the commercial biosurfactant and the biobased 2 surfactant were able to remove motor oil from all the contaminated soils tested more effectively than the biobased 1 surfactant. Finally, the S. bombicola commercial biosurfactant was evaluated as a soil bioremediation agent. In degradation experiments carried out on motor oil-contaminated soils enriched with sugarcane molasses, oil degradation yield in the sandy soil reached almost 90% after 60 days in the presence of the commercial biosurfactant, while it did not exceed 20% in the presence of only S. bombicola cells. These results promise to contribute to the development of green technologies for the treatment of hydrophobic pollutants with economic gains for the oil industries.

Microbial Biosurfactant: A New Frontier for Sustainable Agriculture and Pharmaceutical Industries

In the current scenario of changing climatic conditions and the rising global population, there is an urgent need to explore novel, efficient, and economical natural products for the benefit of humankind. Biosurfactants are one of the latest explored microbial synthesized biomolecules that have been used in numerous fields, including agriculture, pharmaceuticals, cosmetics, food processing, and environment-cleaning industries, as a source of raw materials, for the lubrication, wetting, foaming, emulsions formulations, and as stabilizing dispersions. The amphiphilic nature of biosurfactants have shown to be a great advantage, distributing themselves into two immiscible surfaces by reducing the interfacial surface tension and increasing the solubility of hydrophobic compounds. Furthermore, their eco-friendly nature, low or even no toxic nature, durability at higher temperatures, and ability to withstand a wide range of pH fluctuations make microbial surfactants preferable compared to their chemical counterparts. Additionally, biosurfactants can obviate the oxidation flow by eliciting antioxidant properties, antimicrobial and anticancer activities, and drug delivery systems, further broadening their applicability in the food and pharmaceutical industries. Nowadays, biosurfactants have been broadly utilized to improve the soil quality by improving the concentration of trace elements and have either been mixed with pesticides or applied singly on the plant surfaces for plant disease management. In the present review, we summarize the latest research on microbial synthesized biosurfactant compounds, the limiting factors of biosurfactant production, their application in improving soil quality and plant disease management, and their use as antioxidant or antimicrobial compounds in the pharmaceutical industries.

Impact of Processing Conditions on Rheology, Tribology and Wet Lubrication Performance of a Novel Amino Lipid Hair Conditioner

The objective of this work was to carry out a comprehensive evaluation of the performance of a novel cationic amino lipid surfactant, Brassicyl Valinate Esylate (BVE), in contrast to conventional alkyl quaternary ammonium surfactants (quats), through a study of the effects of process mixing speed on its overall rheological, tribological and wet lubrication performance in comparison to BTAC and CTAC, two cationic surfactants widely used in cosmetics. The major cosmetic application of cationic surfactants is in the preparation of hair conditioners. Hence, this analysis was done firstly by conducting tensile combing tests to evaluate reduction in wet lubrication which translates to conditioning performance. The combing results serve as a testing metric that adequately corresponds to consumer perception of conditioned hair. To correlate this technically, yield stress measurements were conducted to establish rheologic profiles of the conditioner formulations, and in vitro tribological testing of the emulsion systems between two steel surfaces were done to technically simulate the spreading and rubbing of conditioner on the hair. The effect of processing conditions on the formulations was then evaluated. BVE was found to be an effective conditioning surfactant suitable as an eco-friendly replacement for BTAC and CTAC in hair conditioner formulations. The results showed that higher shear mixing rates during formulation lead to poorer performance effects evident through decreased yield stress values, lower percentage reduction in combing force and a higher coefficient of friction.

Biosurfactants: Properties and Applications in Drug Delivery, Biotechnology and Ecotoxicology

Surfactants are amphiphilic compounds having hydrophilic and hydrophobic moieties in their structure. They can be of synthetic or of microbial origin, obtained respectively from chemical synthesis or from microorganisms’ activity. A new generation of ecofriendly surfactant molecules or biobased surfactants is increasingly growing, attributed to their versatility of applications. Surfactants can be used as drug delivery systems for a range of molecules given their capacity to create micelles which can promote the encapsulation of bioactives of pharmaceutical interest; besides, these assemblies can also show antimicrobial properties. The advantages of biosurfactants include their high biodegradability profile, low risk of toxicity, production from renewable sources, functionality under extreme pH and temperature conditions, and long-term physicochemical stability. The application potential of these types of polymers is related to their properties enabling them to be processed by emulsification, separation, solubilization, surface (interfacial) tension, and adsorption for the production of a range of drug delivery systems. Biosurfactants have been employed as a drug delivery system to improve the bioavailability of a good number of drugs that exhibit low aqueous solubility. The great potential of these molecules is related to their auto assembly and emulsification capacity. Biosurfactants produced from bacteria are of particular interest due to their antibacterial, antifungal, and antiviral properties with therapeutic and biomedical potential. In this review, we discuss recent advances and perspectives of biosurfactants with antimicrobial properties and how they can be used as structures to develop semisolid hydrogels for drug delivery, in environmental bioremediation, in biotechnology for the reduction of production costs and also their ecotoxicological impact as pesticide alternative.

Production of spiculisporic acid by Talaromyces trachyspermus in fed-batch bioreactor culture

Spiculisporic acid (SA) is a fatty acid-type biosurfactant with one lactone ring and two carboxyl groups. It has been used in metal removers and cosmetics, because of its low propensity to cause irritation to the skin, its anti-bacterial properties, and high surface activity. In the present study, we report an effective method for producing SA by selecting a high-producing strain and investigating the effective medium components, conditions, and environments for its culture. Among the 11 kinds of Talaromyces species, T. trachyspermus NBRC 32238 showed the highest production of a crystalline substance, which was determined to be SA using NMR. The strain was able to produce SA under acidic conditions from hexoses, pentoses, and disaccharides, with glucose and sucrose serving as the most appropriate substrates. Investigation of nitrogen sources and trace metal ions revealed meat extract and FeCl3 as components that promoted SA production. Upon comparing the two types of cultures with glucose in a baffle flask or aeration bioreactor, SA production was found to be slightly higher in the flask than in the reactor. In the bioreactor culture, sucrose was found to be an appropriate substrate for SA production, as compared to glucose, because with sucrose, the lag time until the start of SA production was shortened. Finally, fed-batch culture with sucrose resulted in 60 g/L of SA, with a total yield of 0.22 g SA/g sucrose and a productivity of 6.6 g/L/day.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.

Production of Sophorolipid Biosurfactant by Insect Derived Novel Yeast Metschnikowia churdharensis f.a., sp. nov., and Its Antifungal Activity Against Plant and Human Pathogens

Biosurfactants are potential biomolecules that have extensive utilization in cosmetics, medicines, bioremediation and processed foods. Yeast produced biosurfactants offer thermal resistance, antioxidant activity, and no risk of pathogenicity, illustrating their promising use in food formulations. The present study is aimed to assess potential of biosurfactant screened from a novel yeast and their inhibition against food spoilage fungi. A novel asexual ascomycetes yeast strain CIG-6A^T producing biosurfactant, was isolated from the gut of stingless bee from Churdhar, HP, India. The phylogenetic analysis revealed that the strain CIG-6A^T was closely related to Metschnikowia koreensis, showing 94.38% sequence similarity in the D1D2 region for which the name Metschnikowia churdharensis f.a., sp. nov., is proposed. The strain CIG-6A^T was able to produce sophorolipid biosurfactant under optimum conditions. Sophorolipid biosurfactant from strain CIG-6A^T effectively reduced the surface tension from 72.8 to 35 mN/m. Sophorolipid biosurfactant was characterized using TLC, FTIR, GC-MS and LC-MS techniques and was a mixture of both acidic and lactonic forms. Sophorolipid assessed promising activity against pathogenic fungi viz. Fusarium oxysporum (MTCC 9913), Fusarium solani (MTCC 350), and Colletotrichum gloeosporioides (MTCC 2190). The inhibitory effect of biosurfactant CIG-6A^T against F. solani was studied and MIC was 49 μgm/ml, further confirmed through confocal laser scanning microscopy. We illustrated the antifungal activity of sophorolipid biosurfactant from Metschnikowia genus for the first time and suggested a novel antifungal compound against food spoilage and human fungal pathogen.

Enzymatic synthesis of amphiphilic carbohydrate esters: Influence of physicochemical and biochemical parameters

Glycolipids, carbohydrate fatty esters or sugar esters are amphiphilic molecules containing hydrophilic groups bonded to hydrophobic parent structures. Recently, glycolipids have shown their antimicrobial and antitumor capacities. Their surface activity properties have applications in the food, pharmaceutical and cosmetic industries. Sugar esters' building blocks can be obtained from natural resources and/or be transformed by biochemical pathways for uses as surfactants. Biosurfactants are non-ionic, nontoxic, biodegradable, tasteless, and odourless. The biocatalysis of these molecules involves sustainable, green, and safer methods. The advantages of producing biosurfactants from enzymatic catalysis are the energy economy, high selectivity, production of natural products, reduction of the use of fossil-based solvents and chloride compounds. This review presents the most recent studies concerning the evaluation of the impact of the main parameters and their levels influencing the enzymatic synthesis of glycolipids. Various enzyme catalysed synthetic methods were described. The parameters studied were temperature, reaction time, solvent system, type of biocatalyst, substrates molar ratio proportion and the nature of substrates. This review discusses the influence of different biocatalysts in the conversions of glycolipids; The reactivity from mono to polysaccharides and their interaction with fatty acids of different carbon chain lengths in the presence of specific enzymes; The effect of the solvent polarity, the use of multiple solvents, ionic liquids, supercritical CO₂, and solvent-free media in sugar ester conversions; And the optimization of temperature and reaction time in different enzymatic systems.

Production, Characterization and Commercial Formulation of a Biosurfactant from Candida tropicalis UCP0996 and Its Application in Decontamination of Petroleum Pollutants

Contamination by oil and its derivatives causes serious damage to the environment, motivating the development of innovative technologies for the removal of these contaminants, such as the use of biosurfactants. In the present study, the biosurfactant from Candida tropicalis UCP0996 produced in the low cost-medium formulated with molasses, residual frying oil, and corn steep liquor, was characterized and its toxicity, formulation, and application in removal and biodegradation of oil were investigated. The surface tension of the medium was reduced to 30.4 mN/m, yielding 4.11 g/L of isolated biosurfactant after 120 h. Tests under extreme environmental conditions indicated the stability of the biosurfactant. Chemical characterization by thin layer chromatography (TLC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR), and gas chromatography and mass spectroscopy (CG-MS) revealed the glycolipidic nature of the biosurfactant. The isolated biosurfactant showed no toxicity against the microcrustacean Artemia salina, while the properties of the formulated biosurfactant remained stable during 120 days of storage. The biosurfactant removed 66.18% of motor oil adsorbed in marine stones and dispersed 70.95% of oil in seawater. The biosurfactant was also able to increase by 70% the degradation of motor oil by seawater indigenous microorganisms, showing great potential to be applied as a commercial additive in the bioremediation of oil spills.

Valorization of biodiesel side stream waste glycerol for rhamnolipids production by Pseudomonas aeruginosa RS6

Biodiesel side stream waste glycerol was identified as a cheap carbon source for rhamnolipids (RLs) production which at the same time could improve the management of waste. The present study aimed to produce RLs by using Pseudomonas aeruginosa RS6 utilizing waste glycerol as a substrate and to evaluate their physico-chemicals properties. Fermentation conditions such as temperature, initial medium pH, waste glycerol concentration, nitrogen sources and concentrations resulted in different compositions of the mono- and di-RLs produced. The maximum RLs production of 2.73 g/L was obtained when P. aeruginosa RS6 was grown in a basal salt medium supplemented with 1% waste glycerol and 0.2 M sodium nitrate at 35 °C and pH 6.5. At optimal fermentation conditions, the emulsification index (E₂₄) values of cooking oil, diesel oil, benzene, olive oil, petroleum, and kerosene were all above E₂₄₌50%. The surface tension reduction obtained from 72.13 mN/m to 29.4-30.4 mN/m was better than the surface activity of some chemical-based surfactants. The RLs produced possessed antimicrobial activities against Gram-negative and Gram-positive bacteria with values ranging from 37% to 77% of growth inhibition when 1 mg/mL of RLs was used. Concentrations of RLs below 1500 μg/mL did not induce phytotoxicity effects on the tested seeds (Vigna radiata) compared to the chemical-based- surfactant, SDS. Furthermore, RLs tested on zebrafish (Danio rerio) embryos only exhibited low acute toxicity with an LC₅₀ value of 72.97 μg/mL at 48 h of exposure suggesting a green and eco-biochemical worthy of future applications to replace chemical-based surfactants.

Emerging Emulsifiers: Conceptual Basis for the Identification and Rational Design of Peptides with Surface Activity

Emulsifiers are gradually evolving from synthetic molecules of petrochemical origin to biomolecules mainly due to health and environmental concerns. Peptides represent a type of biomolecules whose molecular structure is composed of a sequence of amino acids that can be easily tailored to have specific properties. However, the lack of knowledge about emulsifier behavior, structure-performance relationships, and the implementation of different design routes have limited the application of these peptides. Some computational and experimental approaches have tried to close this knowledge gap, but restrictions in understanding the fundamental phenomena and the limited property data availability have made the performance prediction for emulsifier peptides an area of intensive research. This study provides the concepts necessary to understand the emulsifying behavior of peptides. Additionally, a straightforward description is given of how the molecular structure and conditions of the system directly impact the peptides' ability to stabilize emulsion droplets. Moreover, the routes to design and discover novel peptides with interfacial and emulsifying activity are also discussed, along with the strategies to address some of their major pitfalls and challenges. Finally, this contribution reviews methodologies to build and use data sets containing standard properties of emulsifying peptides by looking at successful applications in different fields.

A review on new aspects of lipopeptide biosurfactant: Types, production, properties and its application in the bioremediation process

Nowadays, the worldwide search regarding renewable products from natural resources is increasing due to the toxicity of chemical counterparts. Biosurfactants are surface-active compounds that contain several physiological functions that are used in industries like food, pharmaceutical, petroleum and agriculture. Microbial lipopeptides have gained more attention among the researchers for their low toxicity, efficient action and good biodegradability when compared with other surfactants. Because of their versatile properties, lipopeptide compounds are utilized in the remediation of organic and inorganic pollutants. This review presented a depth evaluation of lipopeptide surfactants in the bioremediation process and their properties to maintain a sustainable environment. Lipopeptide can acts as a replacement to chemical surfactants only if they meet industrial-scale production and low-cost substrates. This review also demonstrated the production of a lipopeptide biosurfactant from a low-cost substrate and depicted plausible techniques to manage the substrate residues to determine its ability in the different applications particularly in the bioremediation process.

Biosurfactants from Trichoderma Filamentous Fungi-A Preliminary Study

Biosurfactants represent a structurally diverse group of secondary metabolites produced by bacteria, yeasts, and filamentous fungi. Their character is often associated with numerous additional properties. The observation of Trichoderma fungi of various species used as a source of bioinhibitors against pathogenic plants fungi focuses attention to the often quite specific behavior of preparations in contact with, among others, plant leaves, dependent on strain. Thus, an evaluation of the selected strains belonging to the species: T. atroviride, T. citrinoviride,T. reesei and T. harzianum was conducted towards their capability of the extracellular secretion of surfactants, with a simultaneous attempt to pre-determine their chemical nature. Two mineral-organic media were used for this purpose, and the culture fluid was extensively tested using a variety of methods. A decrease in surface tension was observed in culture fluid of each tested strain, especially T. citrinoviride HL and C1. The results strongly depended on medium composition, of which Saunders 1 and MGP 1 were most beneficial. The secreted compounds were further analyzed to pre-determine their chemical nature using IR, GC, and NMR. In the case of most efficient biosurfactant producers, a lipopeptide structure of the surfactants was concluded.

Purification and identification of a surfactin biosurfactant and engine oil degradation by Bacillus velezensis KLP2016

Engine oil used in automobiles is a threat to soil and water due to the recalcitrant properties of its hydrocarbons. It pollutes surrounding environment which affects both flora and fauna. Microbes can degrade hydrocarbons containing engine oil and utilize it as a substrate for their growth. Our results demonstrated that cell-free broth of Bacillus velezensis KLP2016 (Gram + ve, endospore forming; Accession number KY214239) recorded an emulsification index (E₂₄%) from 52.3% to 65.7% against different organic solvents, such as benzene, pentane, cyclohexane, xylene, n-hexane, toluene and engine oil. The surface tension of the cell-free broth of B. velezensis grown in Luria–Bertani broth at 35 °C decreased from 55 to 40 mN m⁻¹at critical micelle concentration 17.2 µg/mL. The active biosurfactant molecule of cell-free broth of Bacillus velezensis KLP2016 was purified by Dietheylaminoethyl-cellulose and size exclusion chromatography, followed by HPLC (RT = 1.130), UV–vis spectrophotometry (210 nm) and thin layer chromatography (R_f = 0.90). The molecular weight of purified biosurfactant was found to be ~ 1.0 kDa, based on Electron Spray Ionization-MS. A concentration of 1980 × 10^–2 parts per million of CO₂ was trapped in a KOH solution after 15 days of incubation in Luria–Bertani broth containing 1% engine oil. Our results suggest that bacterium Bacillus velezensis KLP2016 may promise a new dimension to solving the engine oil pollution problem in near future.

Improved Biosurfactant Production by Enterobacter cloacae B14, Stability Studies, and its Antimicrobial Activity

This work aimed to optimize carbon and nitrogen sources for the growth of Enterobacter cloacae B14 and its biosurfactant (BS) production via One-Variable-At-a-Time (OVAT) method. The BS stability under a range of pH and temperatures was assessed. Antimicrobial activity against Gram-positive and Gram-negative pathogens was determined by the agar well diffusion method. The results showed that the optimum carbon and nitrogen sources for BS production were maltose and yeast extract, respectively, with a maximum BS yield of (39.8 ± 5.2) mg BS/g biomass. The highest emulsification activity (E24) was 79%, which is significantly higher than in the previous studies. We found that B14 BS can withstand a wide range of pH values from 2 to10. It could also function under a range of temperatures from 30-37°C. Thin Layer Chromatography (TLC) and Fourier Transform Infrared Spectrometry (FTIR) analysis confirmed that B14 BS is a glycolipid-like compound, which is rarely found in Enterobacter spp. Cell-free broth showed inhibition against various pathogens, preferable to Gram-positive ones. It had better antimicrobial activity against Bacillus subtilis than a commonly-used antibiotic, tetracycline. Furthermore, B14 broth could inhibit the growth of a tetracycline-resistant Serratia marcescens. Our results showed promising B14 BS applications not only for bioremediation but also for the production of antimicrobial products.

Microbial Culture in Minimal Medium With Oil Favors Enrichment of Biosurfactant Producing Genes

The waste produced by petrochemical industries has a significant environmental impact. Biotechnological approaches offer promising alternatives for waste treatment in a sustainable and environment-friendly manner. Microbial consortia potentially clean up the wastes through degradation of hydrocarbons using biosurfactants as adjuvants. In this work, microbial consortia were obtained from a production water (PW) sample from a Brazilian oil reservoir using enrichment and selection approaches in the presence of oil as carbon source. A consortium was obtained using Bushnell-Haas (BH) mineral medium with petroleum. In parallel, another consortium was obtained in yeast extract peptone dextrose (YPD)-rich medium and was subsequently compared to the BH mineral medium with petroleum. Metagenomic sequencing of these microbial communities showed that the BH consortium was less diverse and predominantly composed of Brevibacillus genus members, while the YPD consortium was taxonomically more diverse. Functional annotation revealed that the BH consortium was enriched with genes involved in biosurfactant synthesis, while the YPD consortium presented higher abundance of hydrocarbon degradation genes. The comparison of these two consortia against consortia available in public databases confirmed the enrichment of biosurfactant genes in the BH consortium. Functional assays showed that the BH consortium exhibits high cellular hydrophobicity and formation of stable emulsions, suggesting that oil uptake by microorganisms might be favored by biosurfactants. In contrast, the YPD consortium was more efficient than the BH consortium in reducing interfacial tension. Despite the genetic differences between the consortia, analysis by a gas chromatography-flame ionization detector showed few significant differences regarding the hydrocarbon degradation rates. Specifically, the YPD consortium presented higher degradation rates of C12 to C14 alkanes, while the BH consortium showed a significant increase in the degradation of some polycyclic aromatic hydrocarbons (PAHs). These data suggest that the enrichment of biosurfactant genes in the BH consortium could promote efficient hydrocarbon degradation, despite its lower taxonomical diversity compared to the consortium enriched in YPD medium. Together, these results showed that cultivation in a minimal medium supplemented with oil was an efficient strategy in selecting biosurfactant-producing microorganisms and highlighted the biotechnological potential of these bacterial consortia in waste treatment and bioremediation of impacted areas.

Valorization of xylose-rich hydrolysate from rice straw, an agroresidue, through biosurfactant production by the soil bacterium Serratia nematodiphila

Biosurfactants, amphiphilic compounds that reduce interfacial tension in oil-aqueous mixtures, are used in the petroleum, pharmaceutical, food, and agriculture industries. Fermentative production of biosurfactants requires expensive sugar or lipid substrates. Lignocellulosic biomass is a relatively cheap and abundant agricultural residue that can be used as an alternative substrate. Currently, several million tonnes of rice and wheat straw are generated globally as agricultural residues, most of which is disposed by open-field burning thereby leading to severe environmental pollution. This study aimed to produce biosurfactants in xylose-rich hydrolysates generated from rice straw. The hydrolysate is also a byproduct of 2G biofuel processes that often goes underutilized. A soil bacterium capable of growing and producing biosurfactants in rice straw hydrolysates, which typically contain growth-inhibitory compounds such as furfural and hydroxymethyl furfural, was isolated. Interestingly, the organism, identified as Serratia nematodiphila, exhibited higher glycolipid formation (4.5 ± 0.6 gL^-1) in xylose-rich hydrolysate than in glucose-rich enzymatic hydrolysate (3.1 ± 0.2 gL^-1) despite the higher bacterial cell density observed with the latter. The biosurfactants were thermostable and possessed promising emulsifying property and anti-microbial activity against bacteria and yeast. Further optimization of C:N resulted in a 2.8-fold increase in glycolipid production from xylose-rich hydrolysates. This study demonstrates the production of glycolipid biosurfactants from lignocellulosic biomass, a low-cost substrate and offers a plausible strategy for the management of these residues. Further, it also provides insights into the generation of additional high-value compounds in a bioethanol biorefinery to improve its commercial feasibility.

Pseudomonas aeruginosa RTE4: A Tea Rhizobacterium With Potential for Plant Growth Promotion and Biosurfactant Production

Tea is an ancient non-alcoholic beverage plantation crop cultivated in the most part of Assam, India. Being a long-term monoculture, tea plants are prone to both biotic and abiotic stresses, and requires massive amounts of chemicals as fertilizers and pesticides to achieve worthy crop productivity. The rhizosphere bacteria with the abilities to produce phytohormone, secreting hydrolytic enzyme, biofilm formation, bio-control activity provides induced systemic resistance to plants against pathogens. Thus, plant growth promoting (PGP) rhizobacteria represents as an alternative candidate to chemical inputs for agriculture sector. Further, deciphering the secondary metabolites, including biosurfactant (BS) allow developing a better understanding of rhizobacterial strains. The acidic nature of tea rhizosphere is predominated by Bacillus followed by Pseudomonas that enhances crop biomass and yield through accelerating uptake of nutrients. In the present study, a strain Pseudomonas aeruginosa RTE4 isolated from tea rhizosphere soil collected from Rosekandy Tea Garden, Cachar, Assam was evaluated for various plant-growth promoting attributes. The strain RTE4 produces indole acetic acid (74.54 μg/ml), hydrolytic enzymes, and solubilize tri-calcium phosphate (46 μg/ml). Bio-control activity of RTE4 was recorded against two foliar fungal pathogens of tea (Corticium invisium and Fusarium solani) and a bacterial plant pathogen (Xanthomonas campestris). The strain RTE4 was positive for BS production in the preliminary screening. Detailed analytical characterization through TLC, FTIR, NMR, and LCMS techniques revealed that the strain RTE4 grown in M9 medium with glucose (2% w/v) produce di-rhamnolipid BS. This BS reduced surface tension of phosphate buffer saline from 71 to 31 mN/m with a critical micelle concentration of 80 mg/L. Purified BS of RTE4 showed minimum inhibitory concentration of 5, 10, and 20 mg/ml against X. campestris, F. solani and C. invisium, respectively. Capability of RTE4 BS to be employed as a biofungicide as compared to Carbendazim - commercially available fungicide is also tested. The strain RTE4 exhibits multiple PGP attributes along with production of di-rhamnolipid BS. This gives a possibility to produce di-rhamnolipid BS from RTE4 in large scale and explore its applications in fields as a biological alternative to chemical fertilizer.