Photo-fermentational hydrogen production of Rhodobacter sp. KKU-PS1 isolated from an UASB reactor

Impact of light spectra on photo-fermentative biohydrogen production by Rhodobacter sphaeroides KKU-PS1

Purple non-sulphur bacteria can only capture up to 10 % light spectra and only 1-5 % of light is converted efficiently for biohydrogen production. To enhance light capture and conversion efficiencies, it is necessary to understand the impact of various light spectra on light harvesting pigments. During photo-fermentation, Rhodobacter sphaeroides KKU-PS1 cultivated at 30 °C and 150 rpm under different light spectra has been investigated. Results revealed that red light is more beneficial for biomass accumulation, whereas green light showed the greatest impact on photo-fermentative biohydrogen production. Light conversion efficiency by green light is 2-folds of that under control white light, hence photo-hydrogen productivity is ranked as green > red > orange > violet > blue > yellow. These experimental data demonstrated that green and red lights are essential for photo-hydrogen and biomass productions of R. sphaeroides and a clearer understanding that possibly pave the way for further photosynthetic enhancement research.

Evaluation of Growth and Utilization Potential of Rhodobacter sphaeroides in Reused Medium

Rhodobacter sphaeroides is a metabolically versatile purple non-sulfur bacteria that can produce valuable substances. As the low-cost and high-efficiency production of valuable substances is attracting attention, the reuse of the medium is emerging as a promising strategy. Therefore, in this study, the growth of R. sphaeroides was evaluated by reusing the medium of Escherichia coli and Saccharomyces cerevisiae. As a result, in the reuse of the medium in which S. cerevisiae was cultured, sufficient growth of R. sphaeroides could be confirmed, and especially, the growth of R. sphaeroides was not inhibited under aerobic conditions. Therefore, it is considered that the strategy of reusing the medium of S. cerevisiae is sufficiently feasible. Of the organic compounds investigated, R. sphaeroides grew best in succinic acid, followed by malic acid, citric acid, acetic acid, and glucose. In addition, by comparing photopigment synthesis in the reused medium, we propose the hypothesis that succinic acid may play an important role in photopigment synthesis for the first time.

Palm oil industrial wastes as a promising feedstock for biohydrogen production: A comprehensive review

By the year 2050, it is estimated that the demand for palm oil is expected to reach an enormous amount of 240 Mt. With a huge demand in the future for palm oil, it is expected that oil palm by-products will rise with the increasing demand. This represents a golden opportunity for sustainable biohydrogen production using oil palm biomass and palm oil mill effluent (POME) as the renewable feedstock. Among the different biological methods for biohydrogen production, dark fermentation and photo-fermentation have been widely studied for their potential to produce biohydrogen by using various waste materials as feedstock, including POME and oil palm biomass. However, the complex structure of oil palm biomass and POME, such as the lignocellulosic composition, limits fermentable substrate available for conversion to biohydrogen. Therefore, proper pre-treatment and suitable process conditions are crucial for effective biohydrogen generation from these feedstocks. In this review, the characteristics of palm oil industrial waste, the process used for biohydrogen production using palm oil industrial waste, their pros and cons, and the influence of various factors have been discussed, as well as a comparison between studies in terms of types of reactors, pre-treatment strategies, the microbial culture used, and optimum operating condition have been presented. Through biological production, hydrogen production rates up to 52 L-H₂/L-medium/h and 6 L-H₂/L-medium/h for solid and liquid palm oil industrial waste, respectively, can be achieved. In short, the continuous supply of palm oil production by-product and relatively, the low cost of the biological method for hydrogen production indicates the potential source of renewable energy.

Enhancing Hydrogen Productivity of Photosynthetic Bacteria from the Formulated Carbon Source by Mixing Xylose with Glucose

To develop an efficient photofermentative process capable of higher rate biohydrogen production using carbon components of lignocellulosic hydrolysate, a desired carbon substrate by mixing xylose with glucose was formulated. Effects of crucial process parameters affecting cellular biochemical reaction of hydrogen by photosynthetic bacteria (PSB), i.e., variation in initial concentration of total carbon, glucose content in initial carbon substrate, and light intensity, were experimentally investigated using response surface methodology (RSM) with a Box-Behnken design (BBD). Hydrogen production rate (HPR) in the maximum value of 30.6 mL h^-1 L^-1 was attained under conditions of 39 mM initial concentration of total carbon, 59% (mol/mol) glucose content in initial carbon substrate, and 12.6 W m^-2 light intensity at light wavelength of 590 nm. Synergic effects of metabolizing such a well-formulated carbon substrate for sustaining the active microbial synthesis to sufficiently accumulate biomass in bioreactor, as well as stimulating enzyme activity of nitrogenase for the higher rate biohydrogen production, were attributed to this carbon substrate that can enable PSB to maintain the relatively consistent microenvironment in suitable culture pH condition during the optimized photofermentative process.

A strategy for successive feedstock reuse to maximize photo-fermentative hydrogen production of Arundo donax L

This study proposed a strategy to maximize the hydrogen yield by reusing feedstock of Arundo donax L. For this purpose, a successive 4-batch photo-fermentative hydrogen production (PFHP) was carried out to test the strategy. About 50% of total hydrogen yield was additionally obtained by reusing the Arundo donax L for successive 4 times in comparison to single 1st batch (161.4 mL/U. cell dry weight). In addition to the highest hydrogen yield, the maximum hydrogen production rate (6.0 mL/U. cell dry weight /h), and the highest volatile fatty acids (VFAs) concentration (32 mM) were also obtained from the 1st batch, while the 2nd batch gave the maximum substrate conversion efficiency (96.5%). Moreover, a positive relationship between the sum of acetic and butyric acids with hydrogen yields was observed. This strategy would help in enhancing hydrogen yield that coupled with cost reduction for biohydrogen production.

Effects of Light Regulation on Proteome Expression in Rhodobacter sphaeroides 2.4.1

Light plays an important role in the transcriptional regulation of photosynthetic apparatus. The influence of oxygen and light conditions on the protein expression of Rhodobacter sphaeroides was investigated using a proteomic approach. The R. sphaeroides was grown aerobically under dark cultivation (D24) and light cultivation (L24) for 24 h. An average of 950 distinguishable spots were obtained on 2-D analytic gel for D24 and L24 conditions, of which 48 proteins exhibited significant changes in protein expression levels. Among the 48, 31 proteins were upregulated and 17 proteins were downregulated in L24 when compared with D24. The results depict the comparative protein expression in R. sphaeroides mediated through growth under light or dark conditions. The data suggest that the overexpressed proteins, phosphoribosyl-ATP pyrophosphatase (HisE), in the D24/aerobic culture are involved in the positive regulation of PAC production can be functionally applied in metabolic engineering and industrial processes.

Bio-Hydrogen Production from Wastewater: A Comparative Study of Low Energy Intensive Production Processes

Billions of litres of wastewater are produced daily from domestic and industrial areas, and whilst wastewater is often perceived as a problem, it has the potential to be viewed as a rich source for resources and energy. Wastewater contains between four and five times more energy than is required to treat it, and is a potential source of bio-hydrogen—a clean energy vector, a feedstock chemical and a fuel, widely recognised to have a role in the decarbonisation of the future energy system. This paper investigates sustainable, low-energy intensive routes for hydrogen production from wastewater, critically analysing five technologies, namely photo-fermentation, dark fermentation, photocatalysis, microbial photo electrochemical processes and microbial electrolysis cells (MECs). The paper compares key parameters influencing H2 production yield, such as pH, temperature and reactor design, summarises the state of the art in each area, and highlights the scale-up technical challenges. In addition to H2 production, these processes can be used for partial wastewater remediation, providing at least 45% reduction in chemical oxygen demand (COD), and are suitable for integration into existing wastewater treatment plants. Key advancements in lab-based research are included, highlighting the potential for each technology to contribute to the development of clean energy. Whilst there have been efforts to scale dark fermentation, electro and photo chemical technologies are still at the early stages of development (Technology Readiness Levels below 4); therefore, pilot plants and demonstrators sited at wastewater treatment facilities are needed to assess commercial viability. As such, a multidisciplinary approach is needed to overcome the current barriers to implementation, integrating expertise in engineering, chemistry and microbiology with the commercial experience of both water and energy sectors. The review concludes by highlighting MECs as a promising technology, due to excellent system modularity, good hydrogen yield (3.6–7.9 L/L/d from synthetic wastewater) and the potential to remove up to 80% COD from influent streams.

Paperboard mill wastewater treatment via combined dark and LED-mediated fermentation in the absence of external chemical addition

Paperboard mill wastewater (PMWW) was treated using two subsequent dark and photo up-flow intermitted stirring tank reactors (UISTRs) under different hydraulic retention times (HRTs) without external chemical use. HRT of 12 h revealed the maximum overall H₂ productivity of 1394.1(±70.6) mL/L/d with contents of 48.9(±2.5) and 47.4(±1.4)% for dark- and photo-processes, respectively. Overall substrate removal efficiency (SDE) of 58.9(±4.5)% was registered at HRT o 12 h. High H₂ productivity was ascribed to fermentation type occurred at dark reactor, since acetate and butyrate accounted for 70.9% of volatile fatty acids. Besides, pH and carbon to nitrogen ratio of dark reactor's effluent at HRT = 12 h were 5.5(±0.1) and 30.0(±2.5), respectively which are the optimum levels for photo fermentation process. Moreover, energetic and economic analyses emphasized on the superiority of 12 h-HRT, where net gain energy, daily saving and payback period accounted for 1319.5 kWh/d, 148.7 $/d and 9.8 years, respectively.

Photo-hydrogen and lipid production from lactate, acetate, butyrate, and sugar manufacturing wastewater with an alternative nitrogen source by Rhodobacter sp. KKU-PS1

Photo-hydrogen and lipid production from individual synthetic volatile fatty acids (VFAs) and sugar manufacturing wastewater (SMW) by Rhodobacter sp. KKU-PS1 with sodium glutamate or Aji-L (i.e., waste from the process of crystallizing monosodium glutamate) as a nitrogen source was investigated. Using individual synthetic VFAs, the maximum hydrogen production was achieved with Aji-L as a nitrogen source rather than sodium glutamate. The maximum hydrogen production was 1,727, 754 and 1,353 mL H₂/L, respectively, using 25 mM of lactate, 40 mM of acetate and 15mM of butyrate as substrates. Under these conditions, lipid was produced in the range of 10.6–16.9% (w/w). Subsequently, photo-hydrogen and lipid production from SMW using Aji-L as nitrogen source was conducted. Maximal hydrogen production and hydrogen yields of 1,672 mL H₂/L and 1.92 mol H₂/mol substrate, respectively, were obtained. Additionally, lipid content and lipid production of 21.3% (w/w) and 475 mg lipid/L were achieved. The analysis of the lipid and fatty acid components revealed that triacyglycerol (TAG) and C18:1 methyl ester were the main lipid and fatty acid components, respectively, found in Rhodobacter sp. KKU-PS1 cells.

Diagnosis of undesired scenarios in hydrogen production by photo-fermentation

This study presents the use of a machine learning method from the artificial intelligence area, such as the support vector machines, applied to the construction of data-based classification models for diagnosing undesired scenarios in the hydrogen production process by photo-fermentation, which was carried out by an immobilized photo-bacteria consortium. The diagnosis models were constructed with data obtained from simulations run with a mechanistic model of the process and assessed on both modelled and experimental batches. The results revealed a 100% diagnosis performance in those batches where light intensity was below and above an optimum operation range. Nevertheless, 55% diagnosis performance was obtained in modelled batches where pH was away from its optimum operation range, showing that diagnosis model predictions during the first observations of those batches were classified as normal operation and revealing diagnosis delay in pH oscillations. In general, results demonstrate the reliability of classification models to be used in future applications such as the on-line process monitoring to detect and diagnose undesired operating conditions and take corrective actions on time to maintain high hydrogen productivities.

Reusing colored industrial wastewaters in a photofermentation for enhancing biohydrogen production by using ultrasound stimulated Rhodobacter sphaeroides

One-time ultrasonication pre-treatment of Rhodobacter sphaeroides was evaluated for improving biohydrogen production via photofermentation. Batch experiments were performed by varying ultrasonication amplitude (15, 30, and 45%) and duration (5, 10, and 15 min) using combined effluents from palm oil as well as pulp and paper mill as a single substrate. Experimental data showed that ultrasonication at amplitude 30% for 10 min (256.33 J/mL) achieved the highest biohydrogen yield of 9.982 mL H₂/mL_medium with 5.125% of light efficiency. A maximum COD_total removal of 44.7% was also obtained. However, when higher ultrasonication energy inputs (>256.33 J/mL) were transmitted to the cells, biohydrogen production did not improve further. In fact, 20.6% decrease of biohydrogen yield (as compared to the highest biohydrogen yield) was observed using the most intense ultrasonicated inoculum (472.59 J/mL). Field emission scanning electron microscope images revealed the occurrence of cell damages and biomass losses if ultrasonication at 472.59 J/mL was used. The present results suggested that moderate ultrasonication pre-treatment was an effective technique to improve biohydrogen production performances of R. sphaeroides.

Effect of adding brewery wastewater to pulp and paper mill effluent to enhance the photofermentation process: wastewater characteristics, biohydrogen production, overall performance, and kinetic modeling

Although a significant amount of brewery wastewater (BW) is generated during beer production, the nutrients in the BW could be reused as a potential bio-resource for biohydrogen production. Therefore, improvements in photofermentative biohydrogen production due to a combination of BW and pulp and paper mill effluent (PPME) as a mixed production medium were investigated comprehensively in this study. The experimental results showed that both the biohydrogen yield and the chemical oxygen demand removal were improved through the combination of BW and PPME. The best biohydrogen yield of 0.69 mol H₂/L medium was obtained using the combination of 10 % BW + 90 % PPME (10B90P), while the reuse of the wastewater alone (100 % BW and 100 % PPME) resulted in 42.3 and 44.0 % less biohydrogen yields than the highest yield, respectively. The greatest light efficiency was 1.97 % and was also achieved using the combination of both wastewaters at 10B90P. This study revealed the potential of reusing and combining two different effluents together, in which the combination of BW and PPME improved the nutrients and light penetration into the mixed production medium.